/members-area/personalblogs/b/gough-lui-s-blog/posts/b-k-ba6010-roadtest-in-depth-ch2-unboxingAfter a bit of a struggle through Australian Customs (for no known good reason) resulting in a delay of a week, the box has finally arrived, so let’s take a look at what it looks like and what’s inside. Unboxing The unit comes packed in a recogni...en-USTelligent Community 12https://community.element14.com/members-area/personalblogs/b/gough-lui-s-blog/posts/b-k-ba6010-roadtest-in-depth-ch2-unboxingSun, 30 Sep 2018 21:15:08 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:6620f3a4-c8aa-4d32-a732-68d6d4bdcd80three-phase1<p>A well written aspect of the overall review. Those kelvin probes do look good, I see they have the &#39;current&#39; and &#39;potential&#39; probes identified on them, allowing them to be connected the correct way round. I do like that, I haven&#39;t always seen it on kelvin clips that I have purchased.</p><p>&nbsp;</p><p>Looks like they have moved to a soft mains key away from the old style mechanical latching switches on their AC source and electronic loads.</p><p>&nbsp;</p><p>The 230V harmonised standard has a +10% and -6% tolerance, that changed from the old 240V +/- 6%, to allow the countries to effectively keep their voltages at the same levels and remain compliant. </p><p>&nbsp;</p><p>Kind regards</p><img src="https://community.element14.com/aggbug?PostID=5611&AppID=316&AppType=Weblog&ContentType=0" width="1" height="1">