/members-area/personalblogs/b/hardware/posts/attiny-fuse-resetterThe other week I was playing with a Digispark clone, and it turns out that the suppliers have not programmed them correctly. Let me explainWhen Erik created the Digispark, he wanted to use all 6 pins of the ATTiny85 for I/O.Because there i...en-USTelligent Community 12https://community.element14.com/members-area/personalblogs/b/hardware/posts/attiny-fuse-resetterMon, 16 Oct 2017 00:39:22 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:43d0ab04-a048-4868-9046-3b1f12ce7986jw07520<p>Hi Mark,</p><p>&nbsp;</p><p>This is an excellent example of the side effects and problems constantly encountered by everyone building innovative things. Your blog is a good example of how the experienced builder meets and overcomes these problems. Thanks for the great insights into your thinking process.</p><p>&nbsp;</p><p>John</p><img src="https://community.element14.com/aggbug?PostID=3695&AppID=301&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/members-area/personalblogs/b/hardware/posts/attiny-fuse-resetterSun, 15 Oct 2017 17:39:30 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:43d0ab04-a048-4868-9046-3b1f12ce7986DAB1<p>Very nice post Mark.</p><p>&nbsp;</p><p>I would not have thought to check on the specific configuration of these devices.</p><p>&nbsp;</p><p>It clearly pays to do a little verification before using them.</p><p>&nbsp;</p><p>DAB</p><img src="https://community.element14.com/aggbug?PostID=3695&AppID=301&AppType=Weblog&ContentType=0" width="1" height="1">