/members-area/personalblogs/b/john-wiltrout-s-blog/posts/process-duration-timer-part-3-interfacesI will begin this blog by showing you how I have mounted the power supply into the project box that will be used for the Process Duration Timer. After a lot of searching in my transformer grave yard I found one that will allo...en-USTelligent Community 12https://community.element14.com/members-area/personalblogs/b/john-wiltrout-s-blog/posts/process-duration-timer-part-3-interfacesFri, 04 Aug 2017 15:13:46 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:904fce07-4e7f-4efc-b8c0-ab838d7fda9ajw07520<p>Addendum:</p><p>&nbsp;</p><p>One of the better engineers on our e14 Forum has called my attention to the poor example that I set in providing an adequate strain relief for the power cord that comes into my project. He is 100 % correct and with a constructive suggestion from him I have added a better strain relief. Often in our excitement to complete a project there is a temptation to take short cuts. Sometimes these short cuts are trivial but when we are dealing with mains power we should always do our best to do things according to the rules. Here is a revised photo of the way I have improved the strain relief on my power cord to the unit.</p><p>&nbsp;</p><p><span>[View:/resized-image/__size/620x465/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-904fce07-4e7f-4efc-b8c0-ab838d7fda9a/1680.contentimage_5F00_185080.jpg:620:465]</span></p><p>&nbsp;</p><p>John</p><img src="https://community.element14.com/aggbug?PostID=3391&AppID=315&AppType=Weblog&ContentType=0" width="1" height="1">