/members-area/personalblogs/b/ralph-yamamoto-s-blog/posts/adafruit-dvi-breakout---with-rpi-picoI&#39;d previously used a SparkFun RP2040 Micromod with a Big Display Carrier Board to try Luke Wren&#39;s Bit-Banged DVI RP2040 HDMI Display . I saw that Adafruit had designed an inexpensive ($1.95) Breakout Board that would allow you to do this with a...en-USTelligent Community 12https://community.element14.com/members-area/personalblogs/b/ralph-yamamoto-s-blog/posts/adafruit-dvi-breakout---with-rpi-picoMon, 14 Jun 2021 14:43:55 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:bb29d630-de08-4419-a8e8-7cb66a2c8c43cstanton1<p>Being DVI over HDMI does that make it actually an analogue signal?</p><img src="https://community.element14.com/aggbug?PostID=11280&AppID=330&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/members-area/personalblogs/b/ralph-yamamoto-s-blog/posts/adafruit-dvi-breakout---with-rpi-picoMon, 07 Jun 2021 01:24:10 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:bb29d630-de08-4419-a8e8-7cb66a2c8c43Gough Lui0<p>That&#39;s pretty impressive considering the signal frequencies involved and the fact it&#39;s going through jumper wires and a breadboard. The fact that a small microcontroller can put out a DVI/HDMI-compatible TDMS signal is pretty cool too. I&#39;ve never thought about even trying this.</p><p>&nbsp;</p><p>- Gough</p><img src="https://community.element14.com/aggbug?PostID=11280&AppID=330&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/members-area/personalblogs/b/ralph-yamamoto-s-blog/posts/adafruit-dvi-breakout---with-rpi-picoSun, 06 Jun 2021 22:48:12 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:bb29d630-de08-4419-a8e8-7cb66a2c8c43phoenixcomm1<p>Cool till dongle. </p><p>~~Cris</p><img src="https://community.element14.com/aggbug?PostID=11280&AppID=330&AppType=Weblog&ContentType=0" width="1" height="1">