Maker Wishlist - What do I buy a Maker?- Holidays on element14

e14phil — Mon, 22 Nov 2021 16:11:10 GMT

Current Revision posted to Documents by e14phil on 11/22/2021 4:11:10 PM

Deck the Bench Holiday Wish List

community.element14.com/.../Deck-the-Bench-Engineer-Wish-List-1.mp4

The holidays are upon us, and once again we're back with our wish list of gifts for Makers, Engineers, and anyone aspiring to be one!

While the wish list is divided by Makers, STEM Students, and Engineers, there are absolutely no rules! All of these products would be useful to any techie looking to work with electronics.

Check out the rest of our Holiday Events here: Deck the Bench 2021 - element14 Holiday Round up

Secret Santa Giveaway

This holiday season, we're doing our own version of a Secret Santa giveaway! Here's how it works:

Your Gift to the Community

Write a blog detailing your idea of the perfect gift for a Maker or Engineer. Tell us why you think it's the perfect gift, and why it's a tool that an Engineer, Maker, or STEM student would really need.
The gift should be a product available Newark or Farnell that costs under $50, and preferably in stock.
We'll pick our 20 favorite blogs. The 20 winners will each receive a gift -- a tool that one of the other 20 winners blogged about!

You might wonder how we match each of the 20 winners with one of the 20 gifts. Well, we're not telling! That's why they call it Secret Santa!

Secret Santa Giveaway 2021 - Holidays on element14

Maker's Wish List

If you have a friend or family member who's always building the coolest gadgets and contraptions, this list is for you!

Switch Mode Power Supply, 3A, 36V, 3 outputs

Unless you've got an infinite supply of batteries, an adjustable power supply is a requirement for design and testing.

Buy Now

Hand Held 6MHz Scope and Digital Multimeter

An Oscilloscope is an extremely important tool on a maker's bench. Most scopes are large and heavy, but this one is handheld. Throw it in your toolbox and go!

Buy Now

Sound Level Meter

For any projects involving audio (or environmental noise), a sound level meter is invaluable.

Buy Now

A Variety of Passive Components

Nothing is more annoying than needing a 1uF capacitor and only having a .5uF. Sure, you could connect 2 .5uF capacitors in parallel, but who wants to do that? Having a variety of passives on hand is very convenient. In fact, you can't have enough! If you're working with surface mount components, check out the SMD kits in the Engineer's list!

Thru hole resistor kit

Buy Now

Thru hole capacitor kit

Buy Now

Handheld Multimeter

Multimeters are requirements for any maker or engineer, and handheld DMM is incredibly convenient.

Buy Now

PCB repair kit

Lifting the trace on a PCB can be annoying, especially when you try to fix it and screw it up even worse. Or is that just me? A PCB Repair Kit makes is a lot easier to fix up PCBs.

Buy Now

Voltage Tester

Small probes make it very easy to test the voltage across components. Easy and inexpensive for someone who likes to repair things.

Buy Now

Distance Meter

This handy device uses a laser to give an accurate reading of distances up to 20m.

Buy Now

5-in-1 Cutter, Stripper, Crimper

Makers and engineers are always making cables. It's a cakewalk with the proper tools, but a nightmare without.

Buy Now

12-in-1 Ratchet Screwdriver

Engineers often carry around a set of tiny screwdrivers. This 12-in-1 screwdriver set replaces them all, and also includes a variety of TORX bits.

Buy Now

Diagonal Cutter

Designed for snipping wire, diagonal cutting pliers are another essential tool in a maker's arsenal.

Buy Now

LED Pivoting Work Light

We've all had those frustrating experiences where our hands blocked our light and we couldn't see what we were soldering. This tiny work light is a lifesaver with those types of problems.

Buy Now

STEM Students Wish List

Find something fun and educational for the aspiring engineers you know!

Waveform generator

Electrical signals aren't just flat lines; you've got sine waves, audio signals, and all kinds of other waveforms. A waveform generator supplies the signals necessary for various designs and testing.

Buy Now

65W Soldering Station

Everyone needs a soldering iron, but since makers and engineers probably already have one, the STEM students get it! Soldering is a very important skill to learn, and a good soldering station will last you a lifetime.

Buy Now

25MHz PC Oscilloscope

We've already discussed oscilloscopes and how important they are in a lab; this one connects to a PC via USB.

Buy Now

Variety of Passive Components

To build circuits on the breadboard, you'll need a variety of passives, like resistors, capacitors and more. Here are two kits that give you plenty to work with.

Thru hole resistor kit

Buy Now

Capacitor kit

Buy Now

Bench Power Supply

Every circuit (well almost!) requires power. Every lab needs a solid and reliable DC power supply.

Buy Now

Breadboard kit

Breadboards let you build circuits without soldering.

Buy Now

Long Nose Pliers

Moving these tiny wires around requires a reliable pair of pliers.

Buy Now

BBC micro:bit

The micro:bit is a pocket sized computer designed to introduce students to engineering and to connect the gap between software and hardware.

For more micro::bit, check out our dedicated microbit space: micro:bit

Buy Now

There are plenty of micro::bit add-ons available that help students build fun projects of all types. Here are two examples:

Climate Action Kit

Buy Now

Totem Spider

Buy Now

Raspberry Pi

A Raspberry Pi is a Single Board Computer (SBC), a fully functioning computer built onto a compact board. They're fully programmable and able to host a variety of sensors, robotics and more.

For more information on Raspberry Pi, check out Raspberry Pi Projects

Buy Now

There are also plenty of accessories for Raspberry Pi, expanding its functionality to just about anything. Here are two examples:

JustBoom Amp HAT for Raspberry Pi

Buy Now

Unicorn HAT Development Board

Buy Now

EE Wish List

How do shop for someone who would rather build it themselves? From this Electrical Engineer's wish list, of course!

Oscilloscope

An oscilloscope is every bit as important as a multimeter. A good one will also last a lifetime; I remember using some ancient oscilloscopes in some of my labs.

Buy Now

Resistance Decade Box

A resistance decade box lets you simulate different resistance loads to test your circuits.

Buy Now

Switch Mode Power Supply, 1.6A, 60V, 3 outputs

This bench power supply provides plenty of juice for most projects.

Buy Now

Bench Multimeter

Every engineer needs a multimeter. A heavy duty bench multimeter is a great investment that will last the an EE's entire career.

Buy Now

Personal Static Eliminator / Ionizer

Ionizers throw ions in the air so they can neutralize any charges at the bench, helping to prevent Electrostatic Discharge.

Buy Now

Antistatic Cabinet

All your tiny passives and ICs should ideally be stored in a static free environment. Specialized cabinets provide a nice way to organize all your parts.

Buy Now

Antistatic Toolbox

Your tools can also be a source of ESD. Storing them in an antistatic toolbox reduces that risk.

Buy Now

Passives

A variety of passives like resistors and capacitors is a must on any bench. These kits are surface mount; check out the maker's and STEM lists for the thru-hole versions.

Surface Mount Resistor Kit

Buy Now

SMD Capacitor Kit

Buy Now

LCR meter for Surface Mount Devices

Measuring values of tiny SMD components is a huge pain. A tweezer probe makes things a lot easier!

Buy Now

Clamp Meter

A clamp multimeter lets you measure current by clamping its hinged jaw on a wire.

Buy Now

Cable Tie Kit

Colored cable ties are a good way to organize the wire spaghetti behind your instruments. The discipline is remembering which color you used for what bundle.

Buy Now

Heavy Duty Stripper / Crimper

Engineers spend a lot of their time making cables and stripping wire. The proper tool makes that job 100x easier. Take it from me, I used to use fingernail clippers and my lab partner used his teeth.

Buy Now

Wrist strap

Because people can also be a source of electrostatic energy, grounding yourself with a wrist strap is always a good idea.

Buy Now

Tags: maker, stem, gift buying guide, student, secretsanta, holidays, 2021, engineers, wish list

Maker Wishlist - What do I buy a Maker?- Holidays on element14

dychen — Mon, 22 Nov 2021 14:59:32 GMT

Revision 17 posted to Documents by dychen on 11/22/2021 2:59:32 PM

Deck the Bench Holiday Wish List

players.brightcove.net/.../index.html

The holidays are upon us, and once again we're back with our wish list of gifts for Makers, Engineers, and anyone aspiring to be one!

While the wish list is divided by Makers, STEM Students, and Engineers, there are absolutely no rules! All of these products would be useful to any techie looking to work with electronics.

Check out the rest of our Holiday Events here: Deck the Bench 2021 - element14 Holiday Round up

Secret Santa Giveaway

This holiday season, we're doing our own version of a Secret Santa giveaway! Here's how it works:

Your Gift to the Community

Write a blog detailing your idea of the perfect gift for a Maker or Engineer. Tell us why you think it's the perfect gift, and why it's a tool that an Engineer, Maker, or STEM student would really need.
The gift should be a product available Newark or Farnell that costs under $50, and preferably in stock.
We'll pick our 20 favorite blogs. The 20 winners will each receive a gift -- a tool that one of the other 20 winners blogged about!

You might wonder how we match each of the 20 winners with one of the 20 gifts. Well, we're not telling! That's why they call it Secret Santa!

Secret Santa Giveaway 2021 - Holidays on element14

Maker's Wish List

If you have a friend or family member who's always building the coolest gadgets and contraptions, this list is for you!

Switch Mode Power Supply, 3A, 36V, 3 outputs

Unless you've got an infinite supply of batteries, an adjustable power supply is a requirement for design and testing.

Buy Now

Hand Held 6MHz Scope and Digital Multimeter

An Oscilloscope is an extremely important tool on a maker's bench. Most scopes are large and heavy, but this one is handheld. Throw it in your toolbox and go!

Buy Now

Sound Level Meter

For any projects involving audio (or environmental noise), a sound level meter is invaluable.

Buy Now

A Variety of Passive Components

Thru hole resistor kit

Buy Now

Thru hole capacitor kit

Buy Now

Handheld Multimeter

Multimeters are requirements for any maker or engineer, and handheld DMM is incredibly convenient.

Buy Now

PCB repair kit

Lifting the trace on a PCB can be annoying, especially when you try to fix it and screw it up even worse. Or is that just me? A PCB Repair Kit makes is a lot easier to fix up PCBs.

Buy Now

Voltage Tester

Small probes make it very easy to test the voltage across components. Easy and inexpensive for someone who likes to repair things.

Buy Now

Distance Meter

This handy device uses a laser to give an accurate reading of distances up to 20m.

Buy Now

5-in-1 Cutter, Stripper, Crimper

Makers and engineers are always making cables. It's a cakewalk with the proper tools, but a nightmare without.

Buy Now

12-in-1 Ratchet Screwdriver

Engineers often carry around a set of tiny screwdrivers. This 12-in-1 screwdriver set replaces them all, and also includes a variety of TORX bits.

Buy Now

Diagonal Cutter

Designed for snipping wire, diagonal cutting pliers are another essential tool in a maker's arsenal.

Buy Now

LED Pivoting Work Light

We've all had those frustrating experiences where our hands blocked our light and we couldn't see what we were soldering. This tiny work light is a lifesaver with those types of problems.

Buy Now

STEM Students Wish List

Find something fun and educational for the aspiring engineers you know!

Waveform generator

Electrical signals aren't just flat lines; you've got sine waves, audio signals, and all kinds of other waveforms. A waveform generator supplies the signals necessary for various designs and testing.

Buy Now

65W Soldering Station

Buy Now

25MHz PC Oscilloscope

We've already discussed oscilloscopes and how important they are in a lab; this one connects to a PC via USB.

Buy Now

Variety of Passive Components

To build circuits on the breadboard, you'll need a variety of passives, like resistors, capacitors and more. Here are two kits that give you plenty to work with.

Thru hole resistor kit

Buy Now

Capacitor kit

Buy Now

Bench Power Supply

Every circuit (well almost!) requires power. Every lab needs a solid and reliable DC power supply.

Buy Now

Breadboard kit

Breadboards let you build circuits without soldering.

Buy Now

Long Nose Pliers

Moving these tiny wires around requires a reliable pair of pliers.

Buy Now

BBC micro:bit

The micro:bit is a pocket sized computer designed to introduce students to engineering and to connect the gap between software and hardware.

For more micro::bit, check out our dedicated microbit space: micro:bit

Buy Now

There are plenty of micro::bit add-ons available that help students build fun projects of all types. Here are two examples:

Climate Action Kit

Buy Now

Totem Spider

Buy Now

Raspberry Pi

A Raspberry Pi is a Single Board Computer (SBC), a fully functioning computer built onto a compact board. They're fully programmable and able to host a variety of sensors, robotics and more.

For more information on Raspberry Pi, check out Raspberry Pi Projects

Buy Now

There are also plenty of accessories for Raspberry Pi, expanding its functionality to just about anything. Here are two examples:

JustBoom Amp HAT for Raspberry Pi

Buy Now

Unicorn HAT Development Board

Buy Now

EE Wish List

How do shop for someone who would rather build it themselves? From this Electrical Engineer's wish list, of course!

Oscilloscope

An oscilloscope is every bit as important as a multimeter. A good one will also last a lifetime; I remember using some ancient oscilloscopes in some of my labs.

Buy Now

Resistance Decade Box

A resistance decade box lets you simulate different resistance loads to test your circuits.

Buy Now

Switch Mode Power Supply, 1.6A, 60V, 3 outputs

This bench power supply provides plenty of juice for most projects.

Buy Now

Bench Multimeter

Every engineer needs a multimeter. A heavy duty bench multimeter is a great investment that will last the an EE's entire career.

Buy Now

Personal Static Eliminator / Ionizer

Ionizers throw ions in the air so they can neutralize any charges at the bench, helping to prevent Electrostatic Discharge.

Buy Now

Antistatic Cabinet

All your tiny passives and ICs should ideally be stored in a static free environment. Specialized cabinets provide a nice way to organize all your parts.

Buy Now

Antistatic Toolbox

Your tools can also be a source of ESD. Storing them in an antistatic toolbox reduces that risk.

Buy Now

Passives

A variety of passives like resistors and capacitors is a must on any bench. These kits are surface mount; check out the maker's and STEM lists for the thru-hole versions.

Surface Mount Resistor Kit

Buy Now

SMD Capacitor Kit

Buy Now

LCR meter for Surface Mount Devices

Measuring values of tiny SMD components is a huge pain. A tweezer probe makes things a lot easier!

Buy Now

Clamp Meter

A clamp multimeter lets you measure current by clamping its hinged jaw on a wire.

Buy Now

Cable Tie Kit

Colored cable ties are a good way to organize the wire spaghetti behind your instruments. The discipline is remembering which color you used for what bundle.

Buy Now

Heavy Duty Stripper / Crimper

Engineers spend a lot of their time making cables and stripping wire. The proper tool makes that job 100x easier. Take it from me, I used to use fingernail clippers and my lab partner used his teeth.

Buy Now

Wrist strap

Because people can also be a source of electrostatic energy, grounding yourself with a wrist strap is always a good idea.

Buy Now

Tags: maker, stem, gift buying guide, student, secretsanta, holidays, 2021, engineers, wish list

Maker Wishlist - What do I buy a Maker?- Holidays on element14

dychen — Mon, 22 Nov 2021 14:53:31 GMT

Revision 16 posted to Documents by dychen on 11/22/2021 2:53:31 PM

Deck the Bench Holiday Wish List

players.brightcove.net/.../index.html

The holidays are upon us, and once again we're back with our wish list of gifts for Makers, Engineers, and anyone aspiring to be one!

While the wish list is divided by Makers, STEM Students, and Engineers, there are absolutely no rules! All of these products would be useful to any techie looking to work with electronics.

Check out the rest of our Holiday Events here: Deck the Bench 2021 - element14 Holiday Round up

Secret Santa Giveaway

This holiday season, we're doing our own version of a Secret Santa giveaway! Here's how it works:

Your Gift to the Community

Write a blog detailing your idea of the perfect gift for a Maker or Engineer. Tell us why you think it's the perfect gift, and why it's a tool that an Engineer, Maker, or STEM student would really need.
The gift should be a product available Newark or Farnell that costs under $50, and preferably in stock.
We'll pick our 20 favorite blogs. The 20 winners will each receive a gift -- a tool that one of the other 20 winners blogged about!

You might wonder how we match each of the 20 winners with one of the 20 gifts. Well, we're not telling! That's why they call it Secret Santa!

Secret Santa Giveaway 2021 - Holidays on element14

Maker's Wish List

If you have a friend or family member who's always building the coolest gadgets and contraptions, this list is for you!

Switch Mode Power Supply, 3A, 36V, 3 outputs

Unless you've got an infinite supply of batteries, an adjustable power supply is a requirement for design and testing.

Buy Now

Hand Held 6MHz Scope and Digital Multimeter

An Oscilloscope is an extremely important tool on a maker's bench. Most scopes are large and heavy, but this one is handheld. Throw it in your toolbox and go!

Buy Now

Sound Level Meter

For any projects involving audio (or environmental noise), a sound level meter is invaluable.

Buy Now

A Variety of Passive Components

Thru hole resistor kit

Buy Now

Thru hole capacitor kit

Buy Now

Handheld Multimeter

Multimeters are requirements for any maker or engineer, and handheld DMM is incredibly convenient.

Buy Now

PCB repair kit

Lifting the trace on a PCB can be annoying, especially when you try to fix it and screw it up even worse. Or is that just me? A PCB Repair Kit makes is a lot easier to fix up PCBs.

Buy Now

Voltage Tester

Small probes make it very easy to test the voltage across components. Easy and inexpensive for someone who likes to repair things.

Buy Now

Distance Meter

This handy device uses a laser to give an accurate reading of distances up to 20m.

Buy Now

5-in-1 Cutter, Stripper, Crimper

Makers and engineers are always making cables. It's a cakewalk with the proper tools, but a nightmare without.

Buy Now

12-in-1 Ratchet Screwdriver

Engineers often carry around a set of tiny screwdrivers. This 12-in-1 screwdriver set replaces them all, and also includes a variety of TORX bits.

Buy Now

Diagonal Cutter

Designed for snipping wire, diagonal cutting pliers are another essential tool in a maker's arsenal.

Buy Now

LED Pivoting Work Light

We've all had those frustrating experiences where our hands blocked our light and we couldn't see what we were soldering. This tiny work light is a lifesaver with those types of problems.

Buy Now

STEM Students Wish List

Find something fun and educational for the aspiring engineers you know!

Waveform generator

Electrical signals aren't just flat lines; you've got sine waves, audio signals, and all kinds of other waveforms. A waveform generator supplies the signals necessary for various designs and testing.

Buy Now

65W Soldering Station

Buy Now

25MHz PC Oscilloscope

We've already discussed oscilloscopes and how important they are in a lab; this one connects to a PC via USB.

Buy Now

Variety of Passive Components

To build circuits on the breadboard, you'll need a variety of passives, like resistors, capacitors and more. Here are two kits that give you plenty to work with.

Thru hole resistor kit

Buy Now

Capacitor kit

Buy Now

Bench Power Supply

Every circuit (well almost!) requires power. Every lab needs a solid and reliable DC power supply.

Buy Now

Breadboard kit

Breadboards let you build circuits without soldering.

Buy Now

Long Nose Pliers

Moving these tiny wires around requires a reliable pair of pliers.

Buy Now

BBC micro:bit

The micro:bit is a pocket sized computer designed to introduce students to engineering and to connect the gap between software and hardware.

For more micro::bit, check out our dedicated microbit space: micro:bit

Buy Now

There are plenty of micro::bit add-ons available that help students build fun projects of all types. Here are two examples:

Climate Action Kit

Buy Now

Totem Spider

Buy Now

Raspberry Pi

A Raspberry Pi is a Single Board Computer (SBC), a fully functioning computer built onto a compact board. They're fully programmable and able to host a variety of sensors, robotics and more.

For more information on Raspberry Pi, check out Raspberry Pi Projects

Buy Now

There are also plenty of accessories for Raspberry Pi, expanding its functionality to just about anything. Here are two examples:

JustBoom Amp HAT for Raspberry Pi

Buy Now

Unicorn HAT Development Board

Buy Now

EE Wish List

How do shop for someone who would rather build it themselves? From this Electrical Engineer's wish list, of course!

Oscilloscope

An oscilloscope is every bit as important as a multimeter. A good one will also last a lifetime; I remember using some ancient oscilloscopes in some of my labs.

Buy Now

Resistance Decade Box

A resistance decade box lets you simulate different resistance loads to test your circuits.

Buy Now

Switch Mode Power Supply, 1.6A, 60V, 3 outputs

This bench power supply provides plenty of juice for most projects.

Buy Now

Bench Multimeter

Every engineer needs a multimeter. A heavy duty bench multimeter is a great investment that will last the an EE's entire career.

Buy Now

Personal Static Eliminator / Ionizer

Ionizers throw ions in the air so they can neutralize any charges at the bench, helping to prevent Electrostatic Discharge.

Buy Now

Antistatic Cabinet

All your tiny passives and ICs should ideally be stored in a static free environment. Specialized cabinets provide a nice way to organize all your parts.

Buy Now

Antistatic Toolbox

Your tools can also be a source of ESD. Storing them in an antistatic toolbox reduces that risk.

Buy Now

Passives

A variety of passives like resistors and capacitors is a must on any bench. These kits are surface mount; check out the maker's and STEM lists for the thru-hole versions.

Surface Mount Resistor Kit

Buy Now

SMD Capacitor Kit

Buy Now

LCR meter for Surface Mount Devices

Measuring values of tiny SMD components is a huge pain. A tweezer probe makes things a lot easier!

Buy Now

Clamp Meter

A clamp multimeter lets you measure current by clamping its hinged jaw on a wire.

Buy Now

Cable Tie Kit

Colored cable ties are a good way to organize the wire spaghetti behind your instruments. The discipline is remembering which color you used for what bundle.

Buy Now

Heavy Duty Stripper / Crimper

Engineers spend a lot of their time making cables and stripping wire. The proper tool makes that job 100x easier. Take it from me, I used to use fingernail clippers and my lab partner used his teeth.

Buy Now

Wrist strap

Because people can also be a source of electrostatic energy, grounding yourself with a wrist strap is always a good idea.

Buy Now

Tags: maker, stem, gift buying guide, student, secretsanta, holidays, 2021, engineers, wish list

Maker Wishlist - What do I buy a Maker?- Holidays on element14

dychen — Mon, 22 Nov 2021 14:48:40 GMT

Revision 15 posted to Documents by dychen on 11/22/2021 2:48:40 PM

Deck the Bench Holiday Wish List

players.brightcove.net/.../index.html

The holidays are upon us, and once again we're back with our wish list of gifts for Makers, Engineers, and anyone aspiring to be one!

While the wish list is divided by Makers, STEM Students, and Engineers, there are absolutely no rules! All of these products would be useful to any techie looking to work with electronics.

Check out the rest of our Holiday Events here: Deck the Bench 2021 - element14 Holiday Round up

Secret Santa Giveaway

This holiday season, we're doing our own version of a Secret Santa giveaway! Here's how it works:

Your Gift to the Community

Write a blog detailing your idea of the perfect gift for a Maker or Engineer. Tell us why you think it's the perfect gift, and why it's a tool that an Engineer, Maker, or STEM student would really need.
The gift should be a product available Newark or Farnell that costs under $50, and preferably in stock.
We'll pick our 20 favorite blogs. The 20 winners will each receive a gift -- a tool that one of the other 20 winners blogged about!

You might wonder how we match each of the 20 winners with one of the 20 gifts. Well, we're not telling! That's why they call it Secret Santa!

Secret Santa Giveaway 2021 - Holidays on element14

Maker's Wish List

If you have a friend or family member who's always building the coolest gadgets and contraptions, this list is for you!

Switch Mode Power Supply, 3A, 36V, 3 outputs

Unless you've got an infinite supply of batteries, an adjustable power supply is a requirement for design and testing.

Buy Now

Hand Held 6MHz Scope and Digital Multimeter

An Oscilloscope is an extremely important tool on a maker's bench. Most scopes are large and heavy, but this one is handheld. Throw it in your toolbox and go!

Buy Now

Sound Level Meter

For any projects involving audio (or environmental noise), a sound level meter is invaluable.

Buy Now

A Variety of Passive Components

Thru hole resistor kit

Buy Now

Thru hole capacitor kit

Buy Now

Handheld Multimeter

Multimeters are requirements for any maker or engineer, and handheld DMM is incredibly convenient.

Buy Now

PCB repair kit

Lifting the trace on a PCB can be annoying, especially when you try to fix it and screw it up even worse. Or is that just me? A PCB Repair Kit makes is a lot easier to fix up PCBs.

Buy Now

Voltage Tester

Small probes make it very easy to test the voltage across components. Easy and inexpensive for someone who likes to repair things.

Buy Now

Distance Meter

This handy device uses a laser to give an accurate reading of distances up to 20m.

Buy Now

5-in-1 Cutter, Stripper, Crimper

Makers and engineers are always making cables. It's a cakewalk with the proper tools, but a nightmare without.

Buy Now

12-in-1 Ratchet Screwdriver

Engineers often carry around a set of tiny screwdrivers. This 12-in-1 screwdriver set replaces them all, and also includes a variety of TORX bits.

Buy Now

Diagonal Cutter

Designed for snipping wire, diagonal cutting pliers are another essential tool in a maker's arsenal.

Buy Now

LED Pivoting Work Light

We've all had those frustrating experiences where our hands blocked our light and we couldn't see what we were soldering. This tiny work light is a lifesaver with those types of problems.

Buy Now

STEM Students Wish List

Find something fun and educational for the aspiring engineers you know!

Waveform generator

Electrical signals aren't just flat lines; you've got sine waves, audio signals, and all kinds of other waveforms. A waveform generator supplies the signals necessary for various designs and testing.

Buy Now

65W Soldering Station

Buy Now

25MHz PC Oscilloscope

We've already discussed oscilloscopes and how important they are in a lab; this one connects to a PC via USB.

Buy Now

Variety of Passive Components

To build circuits on the breadboard, you'll need a variety of passives, like resistors, capacitors and more. Here are two kits that give you plenty to work with.

Thru hole resistor kit

Buy Now

Capacitor kit

Buy Now

Bench Power Supply

Every circuit (well almost!) requires power. Every lab needs a solid and reliable DC power supply.

Buy Now

Breadboard kit

Breadboards let you build circuits without soldering.

Buy Now

Long Nose Pliers

Moving these tiny wires around requires a reliable pair of pliers.

Buy Now

BBC micro:bit

The micro:bit is a pocket sized computer designed to introduce students to engineering and to connect the gap between software and hardware.

For more micro::bit, check out our dedicated microbit space: micro:bit

Buy Now

There are plenty of micro::bit add-ons available that help students build fun projects of all types. Here are two examples:

Climate Action Kit

Buy Now

Totem Spider

Buy Now

Raspberry Pi

A Raspberry Pi is a Single Board Computer (SBC), a fully functioning computer built onto a compact board. They're fully programmable and able to host a variety of sensors, robotics and more.

For more information on Raspberry Pi, check out Raspberry Pi Projects

Buy Now

There are also plenty of accessories for Raspberry Pi, expanding its functionality to just about anything. Here are two examples:

JustBoom Amp HAT for Raspberry Pi

Buy Now

Unicorn HAT Development Board

Buy Now

EE Wish List

How do shop for someone who would rather build it themselves? From this Electrical Engineer's wish list, of course!

Oscilloscope

An oscilloscope is every bit as important as a multimeter. A good one will also last a lifetime; I remember using some ancient oscilloscopes in some of my labs.

Buy Now

Resistance Decade Box

A resistance decade box lets you simulate different resistance loads to test your circuits.

Buy Now

Switch Mode Power Supply, 1.6A, 60V, 3 outputs

This bench power supply provides plenty of juice for most projects.

Buy Now

Bench Multimeter

Every engineer needs a multimeter. A heavy duty bench multimeter is a great investment that will last the an EE's entire career.

Buy Now

Personal Static Eliminator / Ionizer

Ionizers throw ions in the air so they can neutralize any charges at the bench, helping to prevent Electrostatic Discharge.

Buy Now

Antistatic Cabinet

All your tiny passives and ICs should ideally be stored in a static free environment. Specialized cabinets provide a nice way to organize all your parts.

Buy Now

Antistatic Toolbox

Your tools can also be a source of ESD. Storing them in an antistatic toolbox reduces that risk.

Buy Now

Passives

A variety of passives like resistors and capacitors is a must on any bench. These kits are surface mount; check out the maker's and STEM lists for the thru-hole versions.

Surface Mount Resistor Kit

Buy Now

SMD Capacitor Kit

Buy Now

LCR meter for Surface Mount Devices

Measuring values of tiny SMD components is a huge pain. A tweezer probe makes things a lot easier!

Buy Now

Clamp Meter

A clamp multimeter lets you measure current by clamping its hinged jaw on a wire.

Buy Now

Cable Tie Kit

Colored cable ties are a good way to organize the wire spaghetti behind your instruments. The discipline is remembering which color you used for what bundle.

Buy Now

Heavy Duty Stripper / Crimper

Engineers spend a lot of their time making cables and stripping wire. The proper tool makes that job 100x easier. Take it from me, I used to use fingernail clippers and my lab partner used his teeth.

Buy Now

Wrist strap

Because people can also be a source of electrostatic energy, grounding yourself with a wrist strap is always a good idea.

Buy Now

Tags: maker, stem, gift buying guide, student, secretsanta, holidays, 2021, engineers, wish list

Maker Wishlist - What do I buy a Maker?- Holidays on element14

e14phil — Mon, 22 Nov 2021 14:17:39 GMT

Revision 14 posted to Documents by e14phil on 11/22/2021 2:17:39 PM

Deck the Bench Holiday Wish List

players.brightcove.net/.../index.html

The holidays are upon us, and once again we're back with our wish list of gifts for Makers, Engineers, and anyone aspiring to be one!

While the wish list is divided by Makers, STEM Students, and Engineers, there are absolutely no rules! All of these products would be useful to any techie looking to work with electronics.

Check out the rest of our Holiday Events here: Deck the Bench 2021 - element14 Holiday Round up

Secret Santa Giveaway

This holiday season, we're doing our own version of a Secret Santa giveaway! Here's how it works:

Your Gift to the Community

Write a blog detailing your idea of the perfect gift for a Maker or Engineer. Tell us why you think it's the perfect gift, and why it's a tool that an Engineer, Maker, or STEM student would really need.
The gift should be a product available Newark or Farnell that costs under $50, and preferably in stock.
We'll pick our 20 favorite blogs. The 20 winners will each receive a gift -- a tool that one of the other 20 winners blogged about!

You might wonder how we match each of the 20 winners with one of the 20 gifts. Well, we're not telling! That's why they call it Secret Santa!

Secret Santa Giveaway 2021 - Holidays on element14

Maker's Wish List

If you have a friend or family member who's always building the coolest gadgets and contraptions, this list is for you!

Switch Mode Power Supply, 3A, 36V, 3 outputs

Unless you've got an infinite supply of batteries, an adjustable power supply is a requirement for design and testing.

Buy NowBuy Now

Hand Held 6MHz Scope and Digital Multimeter

An Oscilloscope is an extremely important tool on a maker's bench. Most scopes are large and heavy, but this one is handheld. Throw it in your toolbox and go!

Buy NowBuy Now

Sound Level Meter

For any projects involving audio (or environmental noise), a sound level meter is invaluable.

Buy NowBuy Now

A Variety of Passive Components

Thru hole resistor kit

Buy NowBuy Now

Thru hole capacitor kit

Buy NowBuy Now

Handheld Multimeter

Multimeters are requirements for any maker or engineer, and handheld DMM is incredibly convenient.

Buy NowBuy Now

PCB repair kit

Lifting the trace on a PCB can be annoying, especially when you try to fix it and screw it up even worse. Or is that just me? A PCB Repair Kit makes is a lot easier to fix up PCBs.

Buy NowBuy Now

Voltage Tester

Small probes make it very easy to test the voltage across components. Easy and inexpensive for someone who likes to repair things.

Buy NowBuy Now

Distance Meter

This handy device uses a laser to give an accurate reading of distances up to 20m.

Buy NowBuy Now

5-in-1 Cutter, Stripper, Crimper

Makers and engineers are always making cables. It's a cakewalk with the proper tools, but a nightmare without.

Buy NowBuy Now

12-in-1 Ratchet Screwdriver

Engineers often carry around a set of tiny screwdrivers. This 12-in-1 screwdriver set replaces them all, and also includes a variety of TORX bits.

Buy NowBuy Now

Diagonal Cutter

Designed for snipping wire, diagonal cutting pliers are another essential tool in a maker's arsenal.

Buy NowBuy Now

LED Pivoting Work Light

We've all had those frustrating experiences where our hands blocked our light and we couldn't see what we were soldering. This tiny work light is a lifesaver with those types of problems.

Buy NowBuy Now

STEM Students Wish List

Find something fun and educational for the aspiring engineers you know!

Waveform generator

Electrical signals aren't just flat lines; you've got sine waves, audio signals, and all kinds of other waveforms. A waveform generator supplies the signals necessary for various designs and testing.

Buy NowBuy Now

65W Soldering Station

Buy NowBuy Now

25MHz PC Oscilloscope

We've already discussed oscilloscopes and how important they are in a lab; this one connects to a PC via USB.

Buy NowBuy Now

Variety of Passive Components

To build circuits on the breadboard, you'll need a variety of passives, like resistors, capacitors and more. Here are two kits that give you plenty to work with.

Thru hole resistor kit

Buy NowBuy Now

Capacitor kit

Buy NowBuy Now

Bench Power Supply

Every circuit (well almost!) requires power. Every lab needs a solid and reliable DC power supply.

Buy NowBuy Now

Breadboard kit

Breadboards let you build circuits without soldering.

Buy NowBuy Now

Long Nose Pliers

Moving these tiny wires around requires a reliable pair of pliers.

Buy NowBuy Now

BBC micro:bit

The micro:bit is a pocket sized computer designed to introduce students to engineering and to connect the gap between software and hardware.

For more micro::bit, check out our dedicated microbit space: micro:bit

Buy NowBuy Now

There are plenty of micro::bit add-ons available that help students build fun projects of all types. Here are two examples:

Climate Action Kit

Buy NowBuy Now

Totem Spider

Buy NowBuy Now

Raspberry Pi

A Raspberry Pi is a Single Board Computer (SBC), a fully functioning computer built onto a compact board. They're fully programmable and able to host a variety of sensors, robotics and more.

For more information on Raspberry Pi, check out Raspberry Pi Projects

Buy NowBuy Now

There are also plenty of accessories for Raspberry Pi, expanding its functionality to just about anything. Here are two examples:

JustBoom Amp HAT for Raspberry Pi

Buy NowBuy Now

Unicorn HAT Development Board

Buy NowBuy Now

EE Wish List

How do shop for someone who would rather build it themselves? From this Electrical Engineer's wish list, of course!

Oscilloscope

An oscilloscope is every bit as important as a multimeter. A good one will also last a lifetime; I remember using some ancient oscilloscopes in some of my labs.

Buy NowBuy Now

Resistance Decade Box

A resistance decade box lets you simulate different resistance loads to test your circuits.

Buy NowBuy Now

Switch Mode Power Supply, 1.6A, 60V, 3 outputs

This bench power supply provides plenty of juice for most projects.

Buy NowBuy Now

Bench Multimeter

Every engineer needs a multimeter. A heavy duty bench multimeter is a great investment that will last the an EE's entire career.

Buy NowBuy Now

Personal Static Eliminator / Ionizer

Ionizers throw ions in the air so they can neutralize any charges at the bench, helping to prevent Electrostatic Discharge.

Buy NowBuy Now

Antistatic Cabinet

All your tiny passives and ICs should ideally be stored in a static free environment. Specialized cabinets provide a nice way to organize all your parts.

Buy NowBuy Now

Antistatic Toolbox

Your tools can also be a source of ESD. Storing them in an antistatic toolbox reduces that risk.

Buy NowBuy Now

Passives

A variety of passives like resistors and capacitors is a must on any bench. These kits are surface mount; check out the maker's and STEM lists for the thru-hole versions.

Surface Mount Resistor Kit

Buy NowBuy Now

SMD Capacitor Kit

Buy NowBuy Now

LCR meter for Surface Mount Devices

Measuring values of tiny SMD components is a huge pain. A tweezer probe makes things a lot easier!

Buy NowBuy Now

Clamp Meter

A clamp multimeter lets you measure current by clamping its hinged jaw on a wire.

Buy NowBuy Now

Cable Tie Kit

Colored cable ties are a good way to organize the wire spaghetti behind your instruments. The discipline is remembering which color you used for what bundle.

Buy NowBuy Now

Heavy Duty Stripper / Crimper

Engineers spend a lot of their time making cables and stripping wire. The proper tool makes that job 100x easier. Take it from me, I used to use fingernail clippers and my lab partner used his teeth.

Buy NowBuy Now

Wrist strap

Because people can also be a source of electrostatic energy, grounding yourself with a wrist strap is always a good idea.

Buy NowBuy Now

Tags: maker, stem, gift buying guide, student, secretsanta, holidays, 2021, engineers, wish list

Maker Wishlist - What do I buy a Maker?- Holidays on element14

dychen — Sat, 20 Nov 2021 16:59:07 GMT

Revision 12 posted to Documents by dychen on 11/20/2021 4:59:07 PM

Deck the Bench Holiday Wish List

The holidays are upon us, and once again we're back with our wish list of gifts for Makers, Engineers, and anyone aspiring to be one!

While the wish list is divided by Makers, STEM Students, and Engineers, there are absolutely no rules! All of these products would be useful to any techie looking to work with electronics.

Check out the rest of our Holiday Events here: Deck the Bench 2021 - element14 Holiday Round up

Secret Santa Giveaway

This holiday season, we're doing our own version of a Secret Santa giveaway! Here's how it works:

Your Gift to the Community

Write a blog detailing your idea of the perfect gift for a Maker or Engineer. Tell us why you think it's the perfect gift, and why it's a tool that an Engineer, Maker, or STEM student would really need.
Remember to tag your blog with secretsanta
The gift should be a product available Newark or Farnell that costs under $50, and preferably in stock.
We'll pick our 20 favorite blogs. The 20 winners will each receive a gift -- a tool that one of the other 20 winners blogged about!

You might wonder how we match each of the 20 winners with one of the 20 gifts. Well, we're not telling! That's why they call it Secret Santa!

Secret Santa Giveaway 2021 - Holidays on element14

Maker's Wish List

If you have a friend or family member who's always building the coolest gadgets and contraptions, this list is for you!

Switch Mode Power Supply, 3A, 36V, 3 outputs

Unless you've got an infinite supply of batteries, an adjustable power supply is a requirement for design and testing.

Buy Now

Hand Held 6MHz Scope and Digital Multimeter

An Oscilloscope is an extremely important tool on a maker's bench. Most scopes are large and heavy, but this one is handheld. Throw it in your toolbox and go!

Buy Now

Sound Level Meter

For any projects involving audio (or environmental noise), a sound level meter is invaluable.

Buy Now

A Variety of Passive Components

Thru hole resistor kit

Buy Now

Thru hole capacitor kit

Buy Now

Handheld Multimeter

Multimeters are requirements for any maker or engineer, and handheld DMM is incredibly convenient.

Buy Now

PCB repair kit

Lifting the trace on a PCB can be annoying, especially when you try to fix it and screw it up even worse. Or is that just me? A PCB Repair Kit makes is a lot easier to fix up PCBs.

Buy Now

Voltage Tester

Small probes make it very easy to test the voltage across components. Easy and inexpensive for someone who likes to repair things.

Buy Now

Distance Meter

This handy device uses a laser to give an accurate reading of distances up to 20m.

Buy Now

5-in-1 Cutter, Stripper, Crimper

Makers and engineers are always making cables. It's a cakewalk with the proper tools, but a nightmare without.

Buy Now

12-in-1 Ratchet Screwdriver

Engineers often carry around a set of tiny screwdrivers. This 12-in-1 screwdriver set replaces them all, and also includes a variety of TORX bits.

Buy Now

Diagonal Cutter

Designed for snipping wire, diagonal cutting pliers are another essential tool in a maker's arsenal.

Buy Now

LED Pivoting Work Light

We've all had those frustrating experiences where our hands blocked our light and we couldn't see what we were soldering. This tiny work light is a lifesaver with those types of problems.

Buy Now

STEM Students Wish List

Find something fun and educational for the aspiring engineers you know!

Waveform generator

Electrical signals aren't just flat lines; you've got sine waves, audio signals, and all kinds of other waveforms. A waveform generator supplies the signals necessary for various designs and testing.

Buy Now

65W Soldering Station

Buy Now

25MHz PC Oscilloscope

We've already discussed oscilloscopes and how important they are in a lab; this one connects to a PC via USB.

Buy Now

Variety of Passive Components

To build circuits on the breadboard, you'll need a variety of passives, like resistors, capacitors and more. Here are two kits that give you plenty to work with.

Thru hole resistor kit

Buy Now

Capacitor kit

Buy Now

Bench Power Supply

Every circuit (well almost!) requires power. Every lab needs a solid and reliable DC power supply.

Buy Now

Breadboard kit

Breadboards let you build circuits without soldering.

Buy Now

Long Nose Pliers

Moving these tiny wires around requires a reliable pair of pliers.

Buy Now

BBC micro:bit

The micro:bit is a pocket sized computer designed to introduce students to engineering and to connect the gap between software and hardware.

For more micro::bit, check out our dedicated microbit space: micro:bit

Buy Now

There are plenty of micro::bit add-ons available that help students build fun projects of all types. Here are two examples:

Climate Action Kit

Buy Now

Totem Spider

Buy Now

Raspberry Pi

A Raspberry Pi is a Single Board Computer (SBC), a fully functioning computer built onto a compact board. They're fully programmable and able to host a variety of sensors, robotics and more.

For more information on Raspberry Pi, check out Raspberry Pi Projects

Buy Now

There are also plenty of accessories for Raspberry Pi, expanding its functionality to just about anything. Here are two examples:

JustBoom Amp HAT

Buy Now

Unicorn HAT Development Board

Buy Now

EE Wish List

How do shop for someone who would rather build it themselves? From this Electrical Engineer's wish list, of course!

Oscilloscope

An oscilloscope is every bit as important as a multimeter. A good one will also last a lifetime; I remember using some ancient oscilloscopes in some of my labs.

Buy Now

Resistance Decade Box

A resistance decade box lets you simulate different resistance loads to test your circuits.

Buy Now

Switch Mode Power Supply, 1.6A, 60V, 3 outputs

This bench power supply provides plenty of juice for most projects.

Buy Now

Bench Multimeter

Every engineer needs a multimeter. A heavy duty bench multimeter is a great investment that will last the an EE's entire career.

Buy Now

Personal Static Eliminator / Ionizer

Ionizers throw ions in the air so they can neutralize any charges at the bench, helping to prevent Electrostatic Discharge.

Buy Now

Antistatic Cabinet

All your tiny passives and ICs should ideally be stored in a static free environment. Specialized cabinets provide a nice way to organize all your parts.

Buy Now

Antistatic Toolbox

Your tools can also be a source of ESD. Storing them in an antistatic toolbox reduces that risk.

Buy Now

Passives

A variety of passives like resistors and capacitors is a must on any bench. These kits are surface mount; check out the maker's and STEM lists for the thru-hole versions.

Surface Mount Resistor Kit

Buy Now

SMD Capacitor Kit

Buy Now

LCR meter for Surface Mount Devices

Measuring values of tiny SMD components is a huge pain. A tweezer probe makes things a lot easier!

Buy Now

Clamp Meter

A clamp multimeter lets you measure current by clamping its hinged jaw on a wire.

Buy Now

Cable Tie Kit

Colored cable ties are a good way to organize the wire spaghetti behind your instruments. The discipline is remembering which color you used for what bundle.

Buy Now

Heavy Duty Stripper / Crimper

Engineers spend a lot of their time making cables and stripping wire. The proper tool makes that job 100x easier. Take it from me, I used to use fingernail clippers and my lab partner used his teeth.

Buy Now

Wrist strap

Because people can also be a source of electrostatic energy, grounding yourself with a wrist strap is always a good idea.

Buy Now

Tags: maker, stem, gift buying guide, student, secretsanta, holidays, 2021, engineers, wish list

Maker Wishlist - What do I buy a Maker?- Holidays on element14

dychen — Sat, 20 Nov 2021 16:19:46 GMT

Revision 11 posted to Documents by dychen on 11/20/2021 4:19:46 PM

Deck the Bench Holiday Wish List

The holidays are upon us, and once again we're back with our wish list of gifts for Makers, Engineers, and anyone aspiring to be one!

While the wish list is divided by Makers, STEM Students, and Engineers, there are absolutely no rules! All of these products would be useful to any techie looking to work with electronics.

Check out the rest of our Holiday Events here: Deck the Bench 2021 - element14 Holiday Round up

Secret Santa Giveaway

This holiday season, we're doing our own version of a Secret Santa giveaway! Here's how it works:

Your Gift to the Community

Write a blog detailing your idea of the perfect gift for a Maker or Engineer. Tell us why you think it's the perfect gift, and why it's a tool that an Engineer, Maker, or STEM student would really need.
Remember to tag your blog with secretsanta
The gift should be a product available Newark or Farnell that costs under $50, and preferably in stock.
We'll pick our 20 favorite blogs. The 20 winners will each receive a gift -- a tool that one of the other 20 winners blogged about!

You might wonder how we match each of the 20 winners with one of the 20 gifts. Well, we're not telling! That's why they call it Secret Santa!

Secret Santa Giveaway 2021 - Holidays on element14

Maker's Wish List

If you have a friend or family member who's always building the coolest gadgets and contraptions, this list is for you!

Switch Mode Power Supply, 3A, 36V, 3 outputs

Unless you've got an infinite supply of batteries, an adjustable power supply is a requirement for design and testing.

Buy Now

Hand Held 6MHz Scope and Digital Multimeter

An Oscilloscope is an extremely important tool on a maker's bench. Most scopes are large and heavy, but this one is handheld. Throw it in your toolbox and go!

Buy Now

Sound Level Meter

For any projects involving audio (or environmental noise), a sound level meter is invaluable.

Buy Now

A Variety of Passive Components

Thru hole resistor kit

Buy Now

Thru hole capacitor kit

Buy Now

Handheld Multimeter

Multimeters are requirements for any maker or engineer, and handheld DMM is incredibly convenient.

Buy Now

PCB repair kit

Lifting the trace on a PCB can be annoying, especially when you try to fix it and screw it up even worse. Or is that just me? A PCB Repair Kit makes is a lot easier to fix up PCBs.

Buy Now

Voltage Tester

Small probes make it very easy to test the voltage across components. Easy and inexpensive for someone who likes to repair things.

Buy Now

Distance Meter

This handy device uses a laser to give an accurate reading of distances up to 20m.

Buy Now

5-in-1 Cutter, Stripper, Crimper

Makers and engineers are always making cables. It's a cakewalk with the proper tools, but a nightmare without.

Buy Now

12-in-1 Ratchet Screwdriver

Engineers often carry around a set of tiny screwdrivers. This 12-in-1 screwdriver set replaces them all, and also includes a variety of TORX bits.

Buy Now

Diagonal Cutter

Designed for snipping wire, diagonal cutting pliers are another essential tool in a maker's arsenal.

Buy Now

LED Pivoting Work Light

We've all had those frustrating experiences where our hands blocked our light and we couldn't see what we were soldering. This tiny work light is a lifesaver with those types of problems.

Buy Now

STEM Students Wish List

Find something fun and educational for the aspiring engineers you know!

Waveform generator

Electrical signals aren't just flat lines; you've got sine waves, audio signals, and all kinds of other waveforms. A waveform generator supplies the signals necessary for various designs and testing.

Buy Now

65W Soldering Station

Buy Now

25MHz PC Oscilloscope

We've already discussed oscilloscopes and how important they are in a lab; this one connects to a PC via USB.

Buy Now

Variety of Passive Components

To build circuits on the breadboard, you'll need a variety of passives, like resistors, capacitors and more. Here are two kits that give you plenty to work with.

Thru hole resistor kit

Buy Now

Capacitor kit

Buy Now

Bench Power Supply

Every circuit (well almost!) requires power. Every lab needs a solid and reliable DC power supply.

Buy Now

Breadboard kit

Breadboards let you build circuits without soldering.

Buy Now

Long Nose Pliers

Moving these tiny wires around requires a reliable pair of pliers.

Buy Now

BBC micro:bit

The micro:bit is a pocket sized computer designed to introduce students to engineering and to connect the gap between software and hardware.

For more micro::bit, check out our dedicated microbit space: micro:bit

Buy Now

There are plenty of micro::bit add-ons available that help students build fun projects of all types. Here are two examples:

Climate Action Kit

Buy Now

Totem Spider

Buy Now

Raspberry Pi

A Raspberry Pi is a Single Board Computer (SBC), a fully functioning computer built onto a compact board. They're fully programmable and able to host a variety of sensors, robotics and more.

For more information on Raspberry Pi, check out Raspberry Pi Projects

Buy Now

There are also plenty of accessories for Raspberry Pi, expanding its functionality to just about anything. Here are two examples:

JustBoom Amp HAT

Buy Now

Unicorn HAT Development Board

Buy Now

EE Wish List

How do shop for someone who would rather build it themselves? From this Electrical Engineer's wish list, of course!

Oscilloscope

An oscilloscope is every bit as important as a multimeter. A good one will also last a lifetime; I remember using some ancient oscilloscopes in some of my labs.

Buy Now

Resistance Decade Box

A resistance decade box lets you simulate different resistance loads to test your circuits.

Buy Now

Switch Mode Power Supply, 1.6A, 60V, 3 outputs

This bench power supply provides plenty of juice for most projects.

Buy Now

Bench Multimeter

Every engineer needs a multimeter. A heavy duty bench multimeter is a great investment that will last the an EE's entire career.

Buy Now

Personal Static Eliminator / Ionizer

Ionizers throw ions in the air so they can neutralize any charges at the bench, helping to prevent Electrostatic Discharge.

Buy Now

Antistatic Cabinet

All your tiny passives and ICs should ideally be stored in a static free environment. Specialized cabinets provide a nice way to organize all your parts.

Buy Now

Antistatic Toolbox

Your tools can also be a source of ESD. Storing them in an antistatic toolbox reduces that risk.

Buy Now

Passives

A variety of passives like resistors and capacitors is a must on any bench. These kits are surface mount; check out the maker's and STEM lists for the thru-hole versions.

Surface Mount Resistor Kit

Buy Now

SMD Capacitor Kit

Buy Now

LCR meter for Surface Mount Devices

Measuring values of tiny SMD components is a huge pain. A tweezer probe makes things a lot easier!

Buy Now

Clamp Meter

A clamp multimeter lets you measure current by clamping its hinged jaw on a wire.

Buy Now

Cable Tie Kit

Colored cable ties are a good way to organize the wire spaghetti behind your instruments. The discipline is remembering which color you used for what bundle.

Buy Now

Heavy Duty Stripper / Crimper

Engineers spend a lot of their time making cables and stripping wire. The proper tool makes that job 100x easier. Take it from me, I used to use fingernail clippers and my lab partner used his teeth.

Buy Now

Wrist strap

Because people can also be a source of electrostatic energy, grounding yourself with a wrist strap is always a good idea.

Buy Now

Tags: maker, stem, gift buying guide, student, secretsanta, holidays, 2021, engineers, wish list

Maker Wishlist - What do I buy a Maker?- Holidays on element14

dychen — Sat, 20 Nov 2021 16:06:17 GMT

Revision 10 posted to Documents by dychen on 11/20/2021 4:06:17 PM

Deck the Bench Holiday Wish List

The holidays are upon us, and once again we're back with our wish list of gifts for Makers, Engineers, and anyone aspiring to be one!

While the wish list is divided by Makers, STEM Students, and Engineers, there are absolutely no rules! All of these products would be useful to any techie looking to work with electronics.

Check out the rest of our Holiday Events here: Deck the Bench 2021 - element14 Holiday Round up

Secret Santa Giveaway

This holiday season, we're doing our own version of a Secret Santa giveaway! Here's how it works:

Your Gift to the Community

Write a blog detailing your idea of the perfect gift for a Maker or Engineer. Tell us why you think it's the perfect gift, and why it's a tool that an Engineer, Maker, or STEM student would really need.
The gift should be a product available Newark or Farnell that costs under $50, and preferably in stock.
We'll pick our 20 favorite blogs. The 20 winners will each receive a gift -- a tool that one of the other 20 winners blogged about!

You might wonder how we match each of the 20 winners with one of the 20 gifts. Well, we're not telling! That's why they call it Secret Santa!

Secret Santa Giveaway 2021 - Holidays on element14

Maker's Wish List

If you have a friend or family member who's always building the coolest gadgets and contraptions, this list is for you!

Switch Mode Power Supply, 3A, 36V, 3 outputs

Unless you've got an infinite supply of batteries, an adjustable power supply is a requirement for design and testing.

Buy Now

Hand Held 6MHz Scope and Digital Multimeter

An Oscilloscope is an extremely important tool on a maker's bench. Most scopes are large and heavy, but this one is handheld. Throw it in your toolbox and go!

Buy Now

Sound Level Meter

For any projects involving audio (or environmental noise), a sound level meter is invaluable.

Buy Now

A Variety of Passive Components

Thru hole resistor kit

Buy Now

Thru hole capacitor kit

Buy Now

Handheld Multimeter

Multimeters are requirements for any maker or engineer, and handheld DMM is incredibly convenient.

Buy Now

PCB repair kit

Lifting the trace on a PCB can be annoying, especially when you try to fix it and screw it up even worse. Or is that just me? A PCB Repair Kit makes is a lot easier to fix up PCBs.

Buy Now

Voltage Tester

Small probes make it very easy to test the voltage across components. Easy and inexpensive for someone who likes to repair things.

Buy Now

Distance Meter

This handy device uses a laser to give an accurate reading of distances up to 20m.

Buy Now

5-in-1 Cutter, Stripper, Crimper

Makers and engineers are always making cables. It's a cakewalk with the proper tools, but a nightmare without.

Buy Now

12-in-1 Ratchet Screwdriver

Engineers often carry around a set of tiny screwdrivers. This 12-in-1 screwdriver set replaces them all, and also includes a variety of TORX bits.

Buy Now

Diagonal Cutter

Designed for snipping wire, diagonal cutting pliers are another essential tool in a maker's arsenal.

Buy Now

LED Pivoting Work Light

We've all had those frustrating experiences where our hands blocked our light and we couldn't see what we were soldering. This tiny work light is a lifesaver with those types of problems.

Buy Now

STEM Students Wish List

Find something fun and educational for the aspiring engineers you know!

Waveform generator

Electrical signals aren't just flat lines; you've got sine waves, audio signals, and all kinds of other waveforms. A waveform generator supplies the signals necessary for various designs and testing.

Buy Now

65W Soldering Station

Buy Now

25MHz PC Oscilloscope

We've already discussed oscilloscopes and how important they are in a lab; this one connects to a PC via USB.

Buy Now

Variety of Passive Components

To build circuits on the breadboard, you'll need a variety of passives, like resistors, capacitors and more. Here are two kits that give you plenty to work with.

Thru hole resistor kit

Buy Now

Capacitor kit

Buy Now

Bench Power Supply

Every circuit (well almost!) requires power. Every lab needs a solid and reliable DC power supply.

Buy Now

Breadboard kit

Breadboards let you build circuits without soldering.

Buy Now

Long Nose Pliers

Moving these tiny wires around requires a reliable pair of pliers.

Buy Now

BBC micro:bit

The micro:bit is a pocket sized computer designed to introduce students to engineering and to connect the gap between software and hardware.

For more micro::bit, check out our dedicated microbit space: micro:bit

Buy Now

There are plenty of micro::bit add-ons available that help students build fun projects of all types. Here are two examples:

Climate Action Kit

Buy Now

Totem Spider

Buy Now

Raspberry Pi

A Raspberry Pi is a Single Board Computer (SBC), a fully functioning computer built onto a compact board. They're fully programmable and able to host a variety of sensors, robotics and more.

For more information on Raspberry Pi, check out Raspberry Pi Projects

Buy Now

There are also plenty of accessories for Raspberry Pi, expanding its functionality to just about anything. Here are two examples:

JustBoom Amp HAT

Buy Now

Unicorn HAT Development Board

Buy Now

EE Wish List

How do shop for someone who would rather build it themselves? From this Electrical Engineer's wish list, of course!

Oscilloscope

An oscilloscope is every bit as important as a multimeter. A good one will also last a lifetime; I remember using some ancient oscilloscopes in some of my labs.

Buy Now

Resistance Decade Box

A resistance decade box lets you simulate different resistance loads to test your circuits.

Buy Now

Switch Mode Power Supply, 1.6A, 60V, 3 outputs

This bench power supply provides plenty of juice for most projects.

Buy Now

Bench Multimeter

Every engineer needs a multimeter. A heavy duty bench multimeter is a great investment that will last the an EE's entire career.

Buy Now

Personal Static Eliminator / Ionizer

Ionizers throw ions in the air so they can neutralize any charges at the bench, helping to prevent Electrostatic Discharge.

Buy Now

Antistatic Cabinet

All your tiny passives and ICs should ideally be stored in a static free environment. Specialized cabinets provide a nice way to organize all your parts.

Buy Now

Antistatic Toolbox

Your tools can also be a source of ESD. Storing them in an antistatic toolbox reduces that risk.

Buy Now

Passives

A variety of passives like resistors and capacitors is a must on any bench. These kits are surface mount; check out the maker's and STEM lists for the thru-hole versions.

Surface Mount Resistor Kit

Buy Now

SMD Capacitor Kit

Buy Now

LCR meter for Surface Mount Devices

Measuring values of tiny SMD components is a huge pain. A tweezer probe makes things a lot easier!

Buy Now

Clamp Meter

A clamp multimeter lets you measure current by clamping its hinged jaw on a wire.

Buy Now

Cable Tie Kit

Colored cable ties are a good way to organize the wire spaghetti behind your instruments. The discipline is remembering which color you used for what bundle.

Buy Now

Heavy Duty Stripper / Crimper

Engineers spend a lot of their time making cables and stripping wire. The proper tool makes that job 100x easier. Take it from me, I used to use fingernail clippers and my lab partner used his teeth.

Buy Now

Wrist strap

Because people can also be a source of electrostatic energy, grounding yourself with a wrist strap is always a good idea.

Buy Now

Tags: maker, stem, gift buying guide, student, secretsanta, holidays, 2021, engineers, wish list

Maker Wishlist - What do I buy a Maker?- Holidays on element14

dychen — Sat, 20 Nov 2021 15:51:43 GMT

Revision 9 posted to Documents by dychen on 11/20/2021 3:51:43 PM

Deck the Bench Holiday Wish List

The holidays are upon us, and once again we're back with our wish list of gifts for Makers, Engineers, and anyone aspiring to be one!

While the wish list is divided by Makers, STEM Students, and Engineers, there are absolutely no rules! All of these products would be useful to any techie looking to work with electronics.

Check out the rest of our Holiday Events here: Deck the Bench 2021 - element14 Holiday Round up

Secret Santa Giveaway

This holiday season, we're doing our own version of a Secret Santa giveaway! Here's how it works:

Your Gift to the Community

Write a blog detailing your idea of the perfect gift for a Maker or Engineer. Tell us why you think it's the perfect gift, and why it's a tool that an Engineer, Maker, or STEM student would really need.
The gift should be a product available Newark or Farnell that costs under $50, and preferably in stock.
We'll pick our 20 favorite blogs. The 20 winners will each receive a gift -- a tool that one of the other 20 winners blogged about!

You might wonder how we match each of the 20 winners with one of the 20 gifts. Well, we're not telling! That's why they call it Secret Santa!

Secret Santa Giveaway 2021 - Holidays on element14

Maker's Wish List

If you have a friend or family member who's always building the coolest gadgets and contraptions, this list is for you!

Switch Mode Power Supply, 3A, 36V, 3 outputs

Unless you've got an infinite supply of batteries, an adjustable power supply is a requirement for design and testing.

Buy Now

Hand Held 6MHz Scope and Digital Multimeter

An Oscilloscope is an extremely important tool on a maker's bench. Most scopes are large and heavy, but this one is handheld. Throw it in your toolbox and go!

Buy Now

Sound Level Meter

For any projects involving audio (or environmental noise), a sound level meter is invaluable.

Buy Now

A Variety of Passive Components

Thru hole resistor kit

Buy Now

Thru hole capacitor kit

Buy Now

Handheld Multimeter

Multimeters are requirements for any maker or engineer, and handheld DMM is incredibly convenient.

Buy Now

PCB repair kit

Lifting the trace on a PCB can be annoying, especially when you try to fix it and screw it up even worse. Or is that just me? A PCB Repair Kit makes is a lot easier to fix up PCBs.

Buy Now

Voltage Tester

Small probes make it very easy to test the voltage across components. Easy and inexpensive for someone who likes to repair things.

Buy Now

Distance Meter

This handy device uses a laser to give an accurate reading of distances up to 20m.

Buy Now

5-in-1 Cutter, Stripper, Crimper

Makers and engineers are always making cables. It's a cakewalk with the proper tools, but a nightmare without.

Buy Now

12-in-1 Ratchet Screwdriver

Engineers often carry around a set of tiny screwdrivers. This 12-in-1 screwdriver set replaces them all, and also includes a variety of TORX bits.

Buy Now

Diagonal Cutter

Designed for snipping wire, diagonal cutting pliers are another essential tool in a maker's arsenal.

Buy Now

LED Pivoting Work Light

We've all had those frustrating experiences where our hands blocked our light and we couldn't see what we were soldering. This tiny work light is a lifesaver with those types of problems.

Buy Now

STEM Students Wish List

Find something fun and educational for the aspiring engineers you know!

Waveform generator

Electrical signals aren't just flat lines; you've got sine waves, audio signals, and all kinds of other waveforms. A waveform generator supplies the signals necessary for various designs and testing.

Buy Now

65W Soldering Station

Buy Now

25MHz PC Oscilloscope

We've already discussed oscilloscopes and how important they are in a lab; this one connects to a PC via USB.

Buy Now

Variety of Passive Components

To build circuits on the breadboard, you'll need a variety of passives, like resistors, capacitors and more. Here are two kits that give you plenty to work with.

Thru hole resistor kit

Buy Now

Capacitor kit

Buy Now

Bench Power Supply

Every circuit (well almost!) requires power. Every lab needs a solid and reliable DC power supply.

Buy Now

Breadboard kit

Breadboards let you build circuits without soldering.

Buy Now

Long Nose Pliers

Moving these tiny wires around requires a reliable pair of pliers.

Buy Now

BBC micro:bit

The micro:bit is a pocket sized computer designed to introduce students to engineering and to connect the gap between software and hardware.

For more micro::bit, check out our dedicated microbit space: micro:bit

Buy Now

There are plenty of micro::bit add-ons available that help students build fun projects of all types. Here are two examples:

Climate Action Kit

Buy Now

Totem Spider

Buy Now

Raspberry Pi

A Raspberry Pi is a Single Board Computer (SBC), a fully functioning computer built onto a compact board. They're fully programmable and able to host a variety of sensors, robotics and more.

For more information on Raspberry Pi, check out Raspberry Pi Projects

Buy Now

There are also plenty of accessories for Raspberry Pi, expanding its functionality to just about anything. Here are two examples:

JustBoom Amp HAT

Buy Now

Unicorn HAT Development Board

Buy Now

EE Wish List

How do shop for someone who would rather build it themselves? From this Electrical Engineer's wish list, of course!

Oscilloscope

An oscilloscope is every bit as important as a multimeter. A good one will also last a lifetime; I remember using some ancient oscilloscopes in some of my labs.

Buy Now

Resistance Decade Box

A resistance decade box lets you simulate different resistance loads to test your circuits.

Buy Now

Switch Mode Power Supply, 1.6A, 60V, 3 outputs

This bench power supply provides plenty of juice for most projects.

Buy Now

Bench Multimeter

Every engineer needs a multimeter. A heavy duty bench multimeter is a great investment that will last the an EE's entire career.

Buy Now

Personal Static Eliminator / Ionizer

Ionizers throw ions in the air so they can neutralize any charges at the bench, helping to prevent Electrostatic Discharge.

Buy Now

Antistatic Cabinet

All your tiny passives and ICs should ideally be stored in a static free environment. Specialized cabinets provide a nice way to organize all your parts.

Buy Now

Antistatic Toolbox

Your tools can also be a source of ESD. Storing them in an antistatic toolbox reduces that risk.

Buy Now

Passives

A variety of passives like resistors and capacitors is a must on any bench. These kits are surface mount; check out the maker's and STEM lists for the thru-hole versions.

Surface Mount Resistor Kit

Buy Now

SMD Capacitor Kit

Buy Now

LCR meter for Surface Mount Devices

Measuring values of tiny SMD components is a huge pain. A tweezer probe makes things a lot easier!

Buy Now

Clamp Meter

A clamp multimeter lets you measure current by clamping its hinged jaw on a wire.

Buy Now

Cable Tie Kit

Colored cable ties are a good way to organize the wire spaghetti behind your instruments. The discipline is remembering which color you used for what bundle.

Buy Now

Heavy Duty Stripper / Crimper

Engineers spend a lot of their time making cables and stripping wire. The proper tool makes that job 100x easier. Take it from me, I used to use fingernail clippers and my lab partner used his teeth.

Buy Now

Wrist strap

Because people can also be a source of electrostatic energy, grounding yourself with a wrist strap is always a good idea.

Buy Now

Tags: maker, stem, gift buying guide, student, secretsanta, holidays, 2021, engineers, wish list

Maker Wishlist - What do I buy a Maker?- Holidays on element14

dychen — Sat, 20 Nov 2021 15:47:45 GMT

Revision 8 posted to Documents by dychen on 11/20/2021 3:47:45 PM

Deck the Bench Holiday Wish List

The holidays are upon us, and once again we're back with our wish list of gifts for Makers, Engineers, and anyone aspiring to be one!

While the wish list is divided by Makers, STEM Students, and Engineers, there are absolutely no rules! All of these products would be useful to any techie looking to work with electronics.

Check out the rest of our Holiday Events here: Deck the Bench 2021 - element14 Holiday Round up

Secret Santa Giveaway

This holiday season, we're doing our own version of a Secret Santa giveaway! Here's how it works:

Your Gift to the Community

Write a blog detailing your idea of the perfect gift for a Maker or Engineer. Tell us why you think it's the perfect gift, and why it's a tool that an Engineer, Maker, or STEM student would really need.
The gift should be a product available Newark or Farnell that costs under $50, and preferably in stock.
We'll pick our 20 favorite blogs. The 20 winners will each receive a gift -- a tool that one of the other 20 winners blogged about!

You might wonder how we match each of the 20 winners with one of the 20 gifts. Well, we're not telling! That's why they call it Secret Santa!

Secret Santa Giveaway 2021 - Holidays on element14

Maker's Wish List

If you have a friend or family member who's always building the coolest gadgets and contraptions, this list is for you!

Switch Mode Power Supply, 3A, 36V, 3 outputs

Unless you've got an infinite supply of batteries, an adjustable power supply is a requirement for design and testing.

Buy Now

Hand Held 6MHz Scope and Digital Multimeter

An Oscilloscope is an extremely important tool on a maker's bench. Most scopes are large and heavy, but this one is handheld. Throw it in your toolbox and go!

Buy Now

Sound Level Meter

For any projects involving audio (or environmental noise), a sound level meter is invaluable.

Buy Now

A Variety of Passive Components

Thru hole resistor kit

Buy Now

Thru hole capacitor kit

Buy Now

Handheld Multimeter

Multimeters are requirements for any maker or engineer, and handheld DMM is incredibly convenient.

Buy Now

PCB repair kit

Lifting the trace on a PCB can be annoying, especially when you try to fix it and screw it up even worse. Or is that just me? A PCB Repair Kit makes is a lot easier to fix up PCBs.

Buy Now

Voltage Tester

Small probes make it very easy to test the voltage across components. Easy and inexpensive for someone who likes to repair things.

Buy Now

Distance Meter

This handy device uses a laser to give an accurate reading of distances up to 20m.

Buy Now

5-in-1 Cutter, Stripper, Crimper

Makers and engineers are always making cables. It's a cakewalk with the proper tools, but a nightmare without.

Buy Now

12-in-1 Ratchet Screwdriver

Engineers often carry around a set of tiny screwdrivers. This 12-in-1 screwdriver set replaces them all, and also includes a variety of TORX bits.

Buy Now

Diagonal Cutter

Designed for snipping wire, diagonal cutting pliers are another essential tool in a maker's arsenal.

Buy Now

LED Pivoting Work Light

We've all had those frustrating experiences where our hands blocked our light and we couldn't see what we were soldering. This tiny work light is a lifesaver with those types of problems.

Buy Now

STEM Students Wish List

Find something fun and educational for the aspiring engineers you know!

Waveform generator

Electrical signals aren't just flat lines; you've got sine waves, audio signals, and all kinds of other waveforms. A waveform generator supplies the signals necessary for various designs and testing.

Buy Now

65W Soldering Station

Buy Now

25MHz PC Oscilloscope

We've already discussed oscilloscopes and how important they are in a lab; this one connects to a PC via USB.

Buy Now

Variety of Passive Components

To build circuits on the breadboard, you'll need a variety of passives, like resistors, capacitors and more. Here are two kits that give you plenty to work with.

Thru hole resistor kit

Buy Now

Capacitor kit

Buy Now

Bench Power Supply

Every circuit (well almost!) requires power. Every lab needs a solid and reliable DC power supply.

Buy Now

Breadboard kit

Breadboards let you build circuits without soldering.

Buy Now

Long Nose Pliers

Moving these tiny wires around requires a reliable pair of pliers.

Buy Now

BBC micro:bit

The micro:bit is a pocket sized computer designed to introduce students to engineering and to connect the gap between software and hardware.

For more micro::bit, check out our dedicated microbit space: micro:bit

Buy Now

There are plenty of micro::bit add-ons available that help students build fun projects of all types. Here are two examples:

Climate Action Kit

Buy Now

Totem Spider

Buy Now

Raspberry Pi

A Raspberry Pi is a Single Board Computer (SBC), a fully functioning computer built onto a compact board. They're fully programmable and able to host a variety of sensors, robotics and more.

For more information on Raspberry Pi, check out Raspberry Pi Projects

Buy Now

There are also plenty of accessories for Raspberry Pi, expanding its functionality to just about anything. Here are two examples:

JustBoom Amp HAT

Buy Now

Unicorn HAT Development Board

Buy Now

EE Wish List

How do shop for someone who would rather build it themselves? From this Electrical Engineer's wish list, of course!

Oscilloscope

An oscilloscope is every bit as important as a multimeter. A good one will also last a lifetime; I remember using some ancient oscilloscopes in some of my labs.

Buy Now

Resistance Decade Box

A resistance decade box lets you simulate different resistance loads to test your circuits.

Buy Now

Switch Mode Power Supply, 1.6A, 60V, 3 outputs

This bench power supply provides plenty of juice for most projects.

Buy Now

Bench Multimeter

Every engineer needs a multimeter. A heavy duty bench multimeter is a great investment that will last the an EE's entire career.

Buy Now

Personal Static Eliminator / Ionizer

Ionizers throw ions in the air so they can neutralize any charges at the bench, helping to prevent Electrostatic Discharge.

Buy Now

Antistatic Cabinet

All your tiny passives and ICs should ideally be stored in a static free environment. Specialized cabinets provide a nice way to organize all your parts.

Buy Now

Antistatic Toolbox

Your tools can also be a source of ESD. Storing them in an antistatic toolbox reduces that risk.

Buy Now

Passives

A variety of passives like resistors and capacitors is a must on any bench. These kits are surface mount; check out the maker's and STEM lists for the thru-hole versions.

Surface Mount Resistor Kit

Buy Now

SMD Capacitor Kit

Buy Now

LCR meter for Surface Mount Devices

Measuring values of tiny SMD components is a huge pain. A tweezer probe makes things a lot easier!

Buy Now

Clamp Meter

A clamp multimeter lets you measure current by clamping its hinged jaw on a wire.

Buy Now

Cable Tie Kit

Colored cable ties are a good way to organize the wire spaghetti behind your instruments. The discipline is remembering which color you used for what bundle.

Buy Now

Heavy Duty Stripper / Crimper

Engineers spend a lot of their time making cables and stripping wire. The proper tool makes that job 100x easier. Take it from me, I used to use fingernail clippers and my lab partner used his teeth.

Buy Now

Wrist strap

Because people can also be a source of electrostatic energy, grounding yourself with a wrist strap is always a good idea.

Buy Now

Tags: maker, stem, gift buying guide, student, secretsanta, holidays, 2021, engineers, wish list

Maker Wishlist - What do I buy a Maker?- Holidays on element14

dychen — Sat, 20 Nov 2021 15:42:06 GMT

Revision 7 posted to Documents by dychen on 11/20/2021 3:42:06 PM

Deck the Bench Holiday Wish List

The holidays are upon us, and once again we're back with our wish list of gifts for Makers, Engineers, and anyone aspiring to be one!

While the wish list is divided by Makers, STEM Students, and Engineers, there are absolutely no rules! All of these products would be useful to any techie looking to work with electronics.

Check out the rest of our Holiday Events here: Deck the Bench 2021 - element14 Holiday Round up

Secret Santa Giveaway

This holiday season, we're doing our own version of a Secret Santa giveaway! Here's how it works:

Your Gift to the Community

Write a blog detailing your idea of the perfect gift for a Maker or Engineer. Tell us why you think it's the perfect gift, and why it's a tool that an Engineer, Maker, or STEM student would really need.
The gift should be a product available Newark or Farnell that costs under $50, and preferably in stock.
We'll pick our 20 favorite blogs. The 20 winners will each receive a gift -- a tool that one of the other 20 winners blogged about!

You might wonder how we match each of the 20 winners with one of the 20 gifts. Well, we're not telling! That's why they call it Secret Santa!

Secret Santa Giveaway 2021 - Holidays on element14

Maker's Wish List

If you have a friend or family member who's always building the coolest gadgets and contraptions, this list is for you!

Switch Mode Power Supply, 3A, 36V, 3 outputs

Unless you've got an infinite supply of batteries, an adjustable power supply is a requirement for design and testing.

Buy Now

Hand Held 6MHz Scope and Digital Multimeter

An Oscilloscope is an extremely important tool on a maker's bench. Most scopes are large and heavy, but this one is handheld. Throw it in your toolbox and go!

Buy Now

Sound Level Meter

For any projects involving audio (or environmental noise), a sound level meter is invaluable.

Buy Now

A Variety of Passive Components

Thru hole resistor kit

Buy Now

Thru hole capacitor kit

Buy Now

Handheld Multimeter

Multimeters are requirements for any maker or engineer, and handheld DMM is incredibly convenient.

Buy Now

PCB repair kit

Lifting the trace on a PCB can be annoying, especially when you try to fix it and screw it up even worse. Or is that just me? A PCB Repair Kit makes is a lot easier to fix up PCBs.

Buy Now

Voltage Tester

Small probes make it very easy to test the voltage across components. Easy and inexpensive for someone who likes to repair things.

Buy Now

Distance Meter

This handy device uses a laser to give an accurate reading of distances up to 20m.

Buy Now

5-in-1 Cutter, Stripper, Crimper

Makers and engineers are always making cables. It's a cakewalk with the proper tools, but a nightmare without.

Buy Now

12-in-1 Ratchet Screwdriver

Engineers often carry around a set of tiny screwdrivers. This 12-in-1 screwdriver set replaces them all, and also includes a variety of TORX bits.

Buy Now

Diagonal Cutter

Designed for snipping wire, diagonal cutting pliers are another essential tool in a maker's arsenal.

Buy Now

LED Pivoting Work Light

We've all had those frustrating experiences where our hands blocked our light and we couldn't see what we were soldering. This tiny work light is a lifesaver with those types of problems.

Buy Now

STEM Students Wish List

Find something fun and educational for the aspiring engineers you know!

Waveform generator

Electrical signals aren't just flat lines; you've got sine waves, audio signals, and all kinds of other waveforms. A waveform generator supplies the signals necessary for various designs and testing.

Buy Now

65W Soldering Station

Buy Now

25MHz PC Oscilloscope

We've already discussed oscilloscopes and how important they are in a lab; this one connects to a PC via USB.

Buy Now

Variety of Passive Components

To build circuits on the breadboard, you'll need a variety of passives, like resistors, capacitors and more. Here are two kits that give you plenty to work with.

Thru hole resistor kit

Buy Now

Capacitor kit

Buy Now

Bench Power Supply

Every circuit (well almost!) requires power. Every lab needs a solid and reliable DC power supply.

Buy Now

Breadboard kit

Breadboards let you build circuits without soldering.

Buy Now

Long Nose Pliers

Moving these tiny wires around requires a reliable pair of pliers.

Buy Now

BBC micro:bit

The micro:bit is a pocket sized computer designed to introduce students to engineering and to connect the gap between software and hardware.

For more micro::bit, check out our dedicated microbit space: micro:bit

Buy Now

There are plenty of micro::bit add-ons available that help students build fun projects of all types. Here are two examples:

Climate Action Kit

Buy Now

Totem Spider

Buy Now

Raspberry Pi

A Raspberry Pi is a Single Board Computer (SBC), a fully functioning computer built onto a compact board. They're fully programmable and able to host a variety of sensors, robotics and more.

For more information on Raspberry Pi, check out Raspberry Pi Projects

Buy Now

There are also plenty of accessories for Raspberry Pi, expanding its functionality to just about anything. Here are two examples:

JustBoom Amp HAT

Buy Now

Unicorn HAT Development Board

Buy Now

EE Wish List

How do shop for someone who would rather build it themselves? From this Electrical Engineer's wish list, of course!

Oscilloscope

An oscilloscope is every bit as important as a multimeter. A good one will also last a lifetime; I remember using some ancient oscilloscopes in some of my labs.

Buy Now

Resistance Decade Box

A resistance decade box lets you simulate different resistance loads to test your circuits.

Buy Now

Switch Mode Power Supply, 1.6A, 60V, 3 outputs

This bench power supply provides plenty of juice for most projects.

Buy Now

Bench Multimeter

Every engineer needs a multimeter. A heavy duty bench multimeter is a great investment that will last the an EE's entire career.

Buy Now

Personal Static Eliminator / Ionizer

Ionizers throw ions in the air so they can neutralize any charges at the bench, helping to prevent Electrostatic Discharge.

Buy Now

Antistatic Cabinet

All your tiny passives and ICs should ideally be stored in a static free environment. Specialized cabinets provide a nice way to organize all your parts.

Buy Now

Antistatic Toolbox

Your tools can also be a source of ESD. Storing them in an antistatic toolbox reduces that risk.

Buy Now

Passives

A variety of passives like resistors and capacitors is a must on any bench. These kits are surface mount; check out the maker's and STEM lists for the thru-hole versions.

Surface Mount Resistor Kit

Buy Now

SMD Capacitor Kit

Buy Now

LCR meter for Surface Mount Devices

Measuring values of tiny SMD components is a huge pain. A tweezer probe makes things a lot easier!

Buy Now

Clamp Meter

A clamp multimeter lets you measure current by clamping its hinged jaw on a wire.

Buy Now

Cable Tie Kit

Colored cable ties are a good way to organize the wire spaghetti behind your instruments. The discipline is remembering which color you used for what bundle.

Buy Now

Heavy Duty Stripper / Crimper

Engineers spend a lot of their time making cables and stripping wire. The proper tool makes that job 100x easier. Take it from me, I used to use fingernail clippers and my lab partner used his teeth.

Buy Now

Wrist strap

Because people can also be a source of electrostatic energy, grounding yourself with a wrist strap is always a good idea.

Buy Now

Maker Wishlist - What do I buy a Maker?- Holidays on element14

dychen — Sat, 20 Nov 2021 14:17:36 GMT

Revision 6 posted to Documents by dychen on 11/20/2021 2:17:36 PM

Deck the Bench Holiday Wish List

The holidays are upon us, and once again we're back with our wish list of gifts for Makers, Engineers, and anyone aspiring to be one!

While the wish list is divided by Makers, STEM Students, and Engineers, there are absolutely no rules! All of these products would be useful to any techie looking to work with electronics.

Check out the rest of our Holiday Events here: Deck the Bench 2021 - element14 Holiday Round up

Secret Santa Giveaway

This holiday season, we're doing our own version of a Secret Santa giveaway! Here's how it works:

Your Gift to the Community

Write a blog detailing your idea of the perfect gift for a Maker or Engineer. Tell us why you think it's the perfect gift, and why it's a tool that an Engineer, Maker, or STEM student would really need.
The gift should be a product available Newark or Farnell that costs under $50, and preferably in stock.
We'll pick our 20 favorite blogs. The 20 winners will each receive a gift -- a tool that one of the other 20 winners blogged about!

You might wonder how we match each of the 20 winners with one of the 20 gifts. Well, we're not telling! That's why they call it Secret Santa!

Secret Santa Giveaway 2021 - Holidays on element14

Maker's Wish List

If you have a friend or family member who's always building the coolest gadgets and contraptions, this list is for you!

Switch Mode Power Supply, 3A, 36V, 3 outputs

Unless you've got an infinite supply of batteries, an adjustable power supply is a requirement for design and testing.

Buy Now

Hand Held 6MHz Scope and Digital Multimeter

An Oscilloscope is an extremely important tool on a maker's bench. Most scopes are large and heavy, but this one is handheld. Throw it in your toolbox and go!

Buy Now

Sound Level Meter

For any projects involving audio (or environmental noise), a sound level meter is invaluable.

Buy Now

A Variety of Passive Components

Thru hole resistor kit

Buy Now

Thru hole capacitor kit

Buy Now

Handheld Multimeter

Multimeters are requirements for any maker or engineer, and handheld DMM is incredibly convenient.

Buy Now

PCB repair kit

Lifting the trace on a PCB can be annoying, especially when you try to fix it and screw it up even worse. Or is that just me? A PCB Repair Kit makes is a lot easier to fix up PCBs.

Buy Now

Voltage Tester

Small probes make it very easy to test the voltage across components. Easy and inexpensive for someone who likes to repair things.

Buy Now

Distance Meter

This handy device uses a laser to give an accurate reading of distances up to 20m.

Buy Now

5-in-1 Cutter, Stripper, Crimper

Makers and engineers are always making cables. It's a cakewalk with the proper tools, but a nightmare without.

Buy Now

12-in-1 Ratchet Screwdriver

Engineers often carry around a set of tiny screwdrivers. This 12-in-1 screwdriver set replaces them all, and also includes a variety of TORX bits.

Buy Now

Diagonal Cutter

Designed for snipping wire, diagonal cutting pliers are another essential tool in a maker's arsenal.

Buy Now

LED Pivoting Work Light

We've all had those frustrating experiences where our hands blocked our light and we couldn't see what we were soldering. This tiny work light is a lifesaver with those types of problems.

Buy Now

STEM Students Wish List

Find something fun and educational for the aspiring engineers you know!

Waveform generator

Electrical signals aren't just flat lines; you've got sine waves, audio signals, and all kinds of other waveforms. A waveform generator supplies the signals necessary for various designs and testing.

Buy Now

65W Soldering Station

Buy Now

25MHz PC Oscilloscope

We've already discussed oscilloscopes and how important they are in a lab; this one connects to a PC via USB.

Buy Now

Variety of Passive Components

To build circuits on the breadboard, you'll need a variety of passives, like resistors, capacitors and more. Here are two kits that give you plenty to work with.

Thru hole resistor kit

Buy Now

Capacitor kit

Buy Now

Bench Power Supply

Every circuit (well almost!) requires power. Every lab needs a solid and reliable DC power supply.

Buy Now

Breadboard kit

Breadboards let you build circuits without soldering.

Buy Now

Long Nose Pliers

Moving these tiny wires around requires a reliable pair of pliers.

Buy Now

BBC micro:bit

The micro:bit is a pocket sized computer designed to introduce students to engineering and to connect the gap between software and hardware.

For more micro::bit, check out our dedicated microbit space: micro:bit

Buy Now

There are plenty of micro::bit add-ons available that help students build fun projects of all types. Here are two examples:

Climate Action Kit

Buy Now

Totem Spider

Buy Now

Raspberry Pi

A Raspberry Pi is a Single Board Computer (SBC), a fully functioning computer built onto a compact board. They're fully programmable and able to host a variety of sensors, robotics and more.

For more information on Raspberry Pi, check out Raspberry Pi Projects

Buy Now

There are also plenty of accessories for Raspberry Pi, expanding its functionality to just about anything. Here are two examples:

JustBoom Amp HAT

Buy Now

Unicorn HAT Development Board

Buy Now

EE Wish List

How do shop for someone who would rather build it themselves? From this Electrical Engineer's wish list, of course!

Oscilloscope

An oscilloscope is every bit as important as a multimeter. A good one will also last a lifetime; I remember using some ancient oscilloscopes in some of my labs.

Buy NowBuy Now

Resistance Decade Box

A resistance decade box lets you simulate different resistance loads to test your circuits.

Buy NowBuy Now

Switch Mode Power Supply, 1.6A, 60V, 3 outputs

This bench power supply provides plenty of juice for most projects.

Buy NowBuy Now

Bench Multimeter

Every engineer needs a multimeter. A heavy duty bench multimeter is a great investment that will last the an EE's entire career.

Buy NowBuy Now

Personal Static Eliminator / Ionizer

Ionizers throw ions in the air so they can neutralize any charges at the bench, helping to prevent Electrostatic Discharge.

Buy NowBuy Now

Antistatic Cabinet

All your tiny passives and ICs should ideally be stored in a static free environment. Specialized cabinets provide a nice way to organize all your parts.

Buy NowBuy Now

Antistatic Toolbox

Your tools can also be a source of ESD. Storing them in an antistatic toolbox reduces that risk.

Buy NowBuy Now

Passives

A variety of passives like resistors and capacitors is a must on any bench. These kits are surface mount; check out the maker's and STEM lists for the thru-hole versions.

Surface Mount Resistor Kit

Buy NowBuy Now

SMD Capacitor Kit

Buy NowBuy Now

LCR meter for Surface Mount Devices

Measuring values of tiny SMD components is a huge pain. A tweezer probe makes things a lot easier!

Buy NowBuy Now

Clamp Meter

A clamp multimeter lets you measure current by clamping its hinged jaw on a wire.

Buy NowBuy Now

Cable Tie Kit

Colored cable ties are a good way to organize the wire spaghetti behind your instruments. The discipline is remembering which color you used for what bundle.

Buy NowBuy Now

Heavy Duty Stripper / Crimper

Engineers spend a lot of their time making cables and stripping wire. The proper tool makes that job 100x easier. Take it from me, I used to use fingernail clippers and my lab partner used his teeth.

Buy NowBuy Now

Wrist strap

Because people can also be a source of electrostatic energy, grounding yourself with a wrist strap is always a good idea.

Buy NowBuy Now

Maker Wishlist - What do I buy a Maker?- Holidays on element14

dychen — Sat, 20 Nov 2021 14:11:43 GMT

Revision 5 posted to Documents by dychen on 11/20/2021 2:11:43 PM

Deck the Bench Holiday Wish List

The holidays are upon us, and once again we're back with our wish list of gifts for Makers, Engineers, and anyone aspiring to be one!

While the wish list is divided by Makers, STEM Students, and Engineers, there are absolutely no rules! All of these products would be useful to any techie looking to work with electronics.

Check out the rest of our Holiday Events here: Deck the Bench 2021 - element14 Holiday Round up

Secret Santa Giveaway

This holiday season, we're doing our own version of a Secret Santa giveaway! Here's how it works:

Your Gift to the Community

Write a blog detailing your idea of the perfect gift for a Maker or Engineer. Tell us why you think it's the perfect gift, and why it's a tool that an Engineer, Maker, or STEM student would really need.
The gift should be a product available Newark or Farnell that costs under $50, and preferably in stock.
We'll pick our 20 favorite blogs. The 20 winners will each receive a gift -- a tool that one of the other 20 winners blogged about!

You might wonder how we match each of the 20 winners with one of the 20 gifts. Well, we're not telling! That's why they call it Secret Santa!

Secret Santa Giveaway 2021 - Holidays on element14

Maker's Wish List

If you have a friend or family member who's always building the coolest gadgets and contraptions, this list is for you!

Switch Mode Power Supply, 3A, 36V, 3 outputs

Unless you've got an infinite supply of batteries, an adjustable power supply is a requirement for design and testing.

Buy Now

Hand Held 6MHz Scope and Digital Multimeter

An Oscilloscope is an extremely important tool on a maker's bench. Most scopes are large and heavy, but this one is handheld. Throw it in your toolbox and go!

Buy Now

Sound Level Meter

For any projects involving audio (or environmental noise), a sound level meter is invaluable.

Buy Now

A Variety of Passive Components

Thru hole resistor kit

Buy Now

Thru hole capacitor kit

Buy Now

Handheld Multimeter

Multimeters are requirements for any maker or engineer, and handheld DMM is incredibly convenient.

Buy Now

PCB repair kit

Lifting the trace on a PCB can be annoying, especially when you try to fix it and screw it up even worse. Or is that just me? A PCB Repair Kit makes is a lot easier to fix up PCBs.

Buy Now

Voltage Tester

Small probes make it very easy to test the voltage across components. Easy and inexpensive for someone who likes to repair things.

Buy Now

Distance Meter

This handy device uses a laser to give an accurate reading of distances up to 20m.

Buy Now

5-in-1 Cutter, Stripper, Crimper

Makers and engineers are always making cables. It's a cakewalk with the proper tools, but a nightmare without.

Buy Now

12-in-1 Ratchet Screwdriver

Engineers often carry around a set of tiny screwdrivers. This 12-in-1 screwdriver set replaces them all, and also includes a variety of TORX bits.

Buy Now

Diagonal Cutter

Designed for snipping wire, diagonal cutting pliers are another essential tool in a maker's arsenal.

Buy Now

LED Pivoting Work Light

We've all had those frustrating experiences where our hands blocked our light and we couldn't see what we were soldering. This tiny work light is a lifesaver with those types of problems.

Buy Now

STEM Students Wish List

Find something fun and educational for the aspiring engineers you know!

Waveform generator

Electrical signals aren't just flat lines; you've got sine waves, audio signals, and all kinds of other waveforms. A waveform generator supplies the signals necessary for various designs and testing.

Buy Now

65W Soldering Station

Buy Now

25MHz PC Oscilloscope

We've already discussed oscilloscopes and how important they are in a lab; this one connects to a PC via USB.

Buy Now

Variety of Passive Components

To build circuits on the breadboard, you'll need a variety of passives, like resistors, capacitors and more. Here are two kits that give you plenty to work with.

Thru hole resistor kit

Buy Now

Capacitor kit

Buy Now

Bench Power Supply

Every circuit (well almost!) requires power. Every lab needs a solid and reliable DC power supply.

Buy Now

Breadboard kit

Breadboards let you build circuits without soldering.

Buy Now

Long Nose Pliers

Moving these tiny wires around requires a reliable pair of pliers.

Buy Now

BBC micro:bit

The micro:bit is a pocket sized computer designed to introduce students to engineering and to connect the gap between software and hardware.

For more micro::bit, check out our dedicated microbit space: micro:bit

Buy Now

There are plenty of micro::bit add-ons available that help students build fun projects of all types. Here are two examples:

Climate Action Kit

Buy Now

Totem Spider

Buy Now

Raspberry Pi

A Raspberry Pi is a Single Board Computer (SBC), a fully functioning computer built onto a compact board. They're fully programmable and able to host a variety of sensors, robotics and more.

For more information on Raspberry Pi, check out Raspberry Pi Projects

Buy Now

There are also plenty of accessories for Raspberry Pi, expanding its functionality to just about anything. Here are two examples:

JustBoom Amp HAT

Buy Now

Unicorn HAT Development Board

Buy Now

EE Wish List

How do shop for someone who would rather build it themselves? From this Electrical Engineer's wish list, of course!

Oscilloscope

An oscilloscope is every bit as important as a multimeter. A good one will also last a lifetime; I remember using some ancient oscilloscopes in some of my labs.

Buy NowBuy Now

Resistance Decade Box

A resistance decade box lets you simulate different resistance loads to test your circuits.

Buy NowBuy Now

Switch Mode Power Supply, 1.6A, 60V, 3 outputs

This bench power supply provides plenty of juice for most projects.

Buy NowBuy Now

Bench Multimeter

Every engineer needs a multimeter. A heavy duty bench multimeter is a great investment that will last the an EE's entire career.

Buy NowBuy Now

Personal Static Eliminator / Ionizer

Ionizers throw ions in the air so they can neutralize any charges at the bench, helping to prevent Electrostatic Discharge.

Buy NowBuy Now

Antistatic Cabinet

All your tiny passives and ICs should ideally be stored in a static free environment. Specialized cabinets provide a nice way to organize all your parts.

Buy NowBuy Now

Antistatic Toolbox

Your tools can also be a source of ESD. Storing them in an antistatic toolbox reduces that risk.

Buy NowBuy Now

Passives

A variety of passives like resistors and capacitors is a must on any bench. These kits are surface mount; check out the maker's and STEM lists for the thru-hole versions.

Surface Mount Resistor Kit

Buy NowBuy Now

SMD Capacitor Kit

Buy NowBuy Now

LCR meter for Surface Mount Devices

Measuring values of tiny SMD components is a huge pain. A tweezer probe makes things a lot easier!

Buy NowBuy Now

Clamp Meter

A clamp multimeter lets you measure current by clamping its hinged jaw on a wire.

Buy NowBuy Now

Cable Tie Kit

Colored cable ties are a good way to organize the wire spaghetti behind your instruments. The discipline is remembering which color you used for what bundle.

Buy NowBuy Now

Heavy Duty Stripper / Crimper

Engineers spend a lot of their time making cables and stripping wire. The proper tool makes that job 100x easier. Take it from me, I used to use fingernail clippers and my lab partner used his teeth.

Buy NowBuy Now

Wrist strap

Because people can also be a source of electrostatic energy, grounding yourself with a wrist strap is always a good idea.

Buy NowBuy Now

Maker Wishlist - What do I buy a Maker?- Holidays on element14

dychen — Sat, 20 Nov 2021 13:56:15 GMT

Revision 4 posted to Documents by dychen on 11/20/2021 1:56:15 PM

Deck the Bench Holiday Wish List

The holidays are upon us, and once again we're back with our wish list of gifts for Makers, Engineers, and anyone aspiring to be one!

While the wish list is divided by Makers, STEM Students, and Engineers, there are absolutely no rules! All of these products would be useful to any techie looking to work with electronics.

Check out the rest of our Holiday Events here: Deck the Bench 2021 - element14 Holiday Round up

Secret Santa Giveaway

This holiday season, we're doing our own version of a Secret Santa giveaway! Here's how it works:

Your Gift to the Community

Write a blog detailing your idea of the perfect gift for a Maker or Engineer. Tell us why you think it's the perfect gift, and why it's a tool that an Engineer, Maker, or STEM student would really need.
The gift should be a product available Newark or Farnell that costs under $50, and preferably in stock.
We'll pick our 20 favorite blogs. The 20 winners will each receive a gift -- a tool that one of the other 20 winners blogged about!

You might wonder how we match each of the 20 winners with one of the 20 gifts. Well, we're not telling! That's why they call it Secret Santa!

Secret Santa Giveaway 2021 - Holidays on element14

Maker's Wish List

If you have a friend or family member who's always building the coolest gadgets and contraptions, this list is for you!

Switch Mode Power Supply, 3A, 36V, 3 outputs

Unless you've got an infinite supply of batteries, an adjustable power supply is a requirement for design and testing.

Buy Now

Hand Held 6MHz Scope and Digital Multimeter

An Oscilloscope is an extremely important tool on a maker's bench. Most scopes are large and heavy, but this one is handheld. Throw it in your toolbox and go!

Buy Now

Sound Level Meter

For any projects involving audio (or environmental noise), a sound level meter is invaluable.

Buy Now

A Variety of Passive Components

Thru hole resistor kit

Buy Now

Thru hole capacitor kit

Buy Now

Handheld Multimeter

Multimeters are requirements for any maker or engineer, and handheld DMM is incredibly convenient.

Buy Now

PCB repair kit

Lifting the trace on a PCB can be annoying, especially when you try to fix it and screw it up even worse. Or is that just me? A PCB Repair Kit makes is a lot easier to fix up PCBs.

Buy Now

Voltage Tester

Small probes make it very easy to test the voltage across components. Easy and inexpensive for someone who likes to repair things.

Buy Now

Distance Meter

This handy device uses a laser to give an accurate reading of distances up to 20m.

Buy Now

5-in-1 Cutter, Stripper, Crimper

Makers and engineers are always making cables. It's a cakewalk with the proper tools, but a nightmare without.

Buy Now

12-in-1 Ratchet Screwdriver

Engineers often carry around a set of tiny screwdrivers. This 12-in-1 screwdriver set replaces them all, and also includes a variety of TORX bits.

Buy Now

Diagonal Cutter

Designed for snipping wire, diagonal cutting pliers are another essential tool in a maker's arsenal.

Buy Now

LED Pivoting Work Light

We've all had those frustrating experiences where our hands blocked our light and we couldn't see what we were soldering. This tiny work light is a lifesaver with those types of problems.

Buy Now

STEM Students Wish List

Find something fun and educational for the aspiring engineers you know!

Waveform generator

Electrical signals aren't just flat lines; you've got sine waves, audio signals, and all kinds of other waveforms. A waveform generator supplies the signals necessary for various designs and testing.

Buy NowBuy Now

65W Soldering Station

Buy NowBuy Now

25MHz PC Oscilloscope

We've already discussed oscilloscopes and how important they are in a lab; this one connects to a PC via USB.

Buy NowBuy Now

Variety of Passive Components

To build circuits on the breadboard, you'll need a variety of passives, like resistors, capacitors and more. Here are two kits that give you plenty to work with.

Thru hole resistor kit

Buy NowBuy Now

Capacitor kit

Buy NowBuy Now

Bench Power Supply

Every circuit (well almost!) requires power. Every lab needs a solid and reliable DC power supply.

Buy NowBuy Now

Breadboard kit

Breadboards let you build circuits without soldering.

Buy NowBuy Now

Long Nose Pliers

Moving these tiny wires around requires a reliable pair of pliers.

Buy NowBuy Now

BBC micro:bit

The micro:bit is a pocket sized computer designed to introduce students to engineering and to connect the gap between software and hardware.

For more micro::bit, check out our dedicated microbit space: micro:bit

Buy NowBuy Now

There are plenty of micro::bit add-ons available that help students build fun projects of all types. Here are two examples:

Climate Action Kit

Buy NowBuy Now

Totem Spider

Buy NowBuy Now

Raspberry Pi

A Raspberry Pi is a Single Board Computer (SBC), a fully functioning computer built onto a compact board. They're fully programmable and able to host a variety of sensors, robotics and more.

For more information on Raspberry Pi, check out Raspberry Pi Projects

Buy NowBuy Now

There are also plenty of accessories for Raspberry Pi, expanding its functionality to just about anything. Here are two examples:

JustBoom Amp HAT for Raspberry Pi

Buy NowBuy Now

Unicorn HAT Development Board

Buy NowBuy Now

EE Wish List

How do shop for someone who would rather build it themselves? From this Electrical Engineer's wish list, of course!

Oscilloscope

An oscilloscope is every bit as important as a multimeter. A good one will also last a lifetime; I remember using some ancient oscilloscopes in some of my labs.

Buy NowBuy Now

Resistance Decade Box

A resistance decade box lets you simulate different resistance loads to test your circuits.

Buy NowBuy Now

Switch Mode Power Supply, 1.6A, 60V, 3 outputs

This bench power supply provides plenty of juice for most projects.

Buy NowBuy Now

Bench Multimeter

Every engineer needs a multimeter. A heavy duty bench multimeter is a great investment that will last the an EE's entire career.

Buy NowBuy Now

Personal Static Eliminator / Ionizer

Ionizers throw ions in the air so they can neutralize any charges at the bench, helping to prevent Electrostatic Discharge.

Buy NowBuy Now

Antistatic Cabinet

All your tiny passives and ICs should ideally be stored in a static free environment. Specialized cabinets provide a nice way to organize all your parts.

Buy NowBuy Now

Antistatic Toolbox

Your tools can also be a source of ESD. Storing them in an antistatic toolbox reduces that risk.

Buy NowBuy Now

Passives

A variety of passives like resistors and capacitors is a must on any bench. These kits are surface mount; check out the maker's and STEM lists for the thru-hole versions.

Surface Mount Resistor Kit

Buy NowBuy Now

SMD Capacitor Kit

Buy NowBuy Now

LCR meter for Surface Mount Devices

Measuring values of tiny SMD components is a huge pain. A tweezer probe makes things a lot easier!

Buy NowBuy Now

Clamp Meter

A clamp multimeter lets you measure current by clamping its hinged jaw on a wire.

Buy NowBuy Now

Cable Tie Kit

Colored cable ties are a good way to organize the wire spaghetti behind your instruments. The discipline is remembering which color you used for what bundle.

Buy NowBuy Now

Heavy Duty Stripper / Crimper

Engineers spend a lot of their time making cables and stripping wire. The proper tool makes that job 100x easier. Take it from me, I used to use fingernail clippers and my lab partner used his teeth.

Buy NowBuy Now

Wrist strap

Because people can also be a source of electrostatic energy, grounding yourself with a wrist strap is always a good idea.

Buy NowBuy Now

Maker Wishlist - What do I buy a Maker?- Holidays on element14

dychen — Sat, 20 Nov 2021 13:54:08 GMT

Revision 3 posted to Documents by dychen on 11/20/2021 1:54:08 PM

Deck the Bench Holiday Wish List

The holidays are upon us, and once again we're back with our wish list of gifts for Makers, Engineers, and anyone aspiring to be one!

While the wish list is divided by Makers, STEM Students, and Engineers, there are absolutely no rules! All of these products would be useful to any techie looking to work with electronics.

Check out the rest of our Holiday Events here: Deck the Bench 2021 - element14 Holiday Round up

Secret Santa Giveaway

This holiday season, we're doing our own version of a Secret Santa giveaway! Here's how it works:

Your Gift to the Community

Write a blog detailing your idea of the perfect gift for a Maker or Engineer. Tell us why you think it's the perfect gift, and why it's a tool that an Engineer, Maker, or STEM student would really need.
The gift should be a product available Newark or Farnell that costs under $50, and preferably in stock.
We'll pick our 20 favorite blogs. The 20 winners will each receive a gift -- a tool that one of the other 20 winners blogged about!

You might wonder how we match each of the 20 winners with one of the 20 gifts. Well, we're not telling! That's why they call it Secret Santa!

Secret Santa Giveaway 2021 - Holidays on element14

Maker's Wish List

If you have a friend or family member who's always building the coolest gadgets and contraptions, this list is for you!

Switch Mode Power Supply, 3A, 36V, 3 outputs

Unless you've got an infinite supply of batteries, an adjustable power supply is a requirement for design and testing.

Buy Now

Hand Held 6MHz Scope and Digital Multimeter

An Oscilloscope is an extremely important tool on a maker's bench. Most scopes are large and heavy, but this one is handheld. Throw it in your toolbox and go!

Buy Now

Sound Level Meter

For any projects involving audio (or environmental noise), a sound level meter is invaluable.

Buy Now

A Variety of Passive Components

Thru hole resistor kit

Buy Now

Thru hole capacitor kit

Buy Now

Handheld Multimeter

Multimeters are requirements for any maker or engineer, and handheld DMM is incredibly convenient.

Buy Now

PCB repair kit

Lifting the trace on a PCB can be annoying, especially when you try to fix it and screw it up even worse. Or is that just me? A PCB Repair Kit makes is a lot easier to fix up PCBs.

Buy Now

Voltage Tester

Small probes make it very easy to test the voltage across components. Easy and inexpensive for someone who likes to repair things.

Buy Now

Distance Meter

This handy device uses a laser to give an accurate reading of distances up to 20m.

Buy Now

5-in-1 Cutter, Stripper, Crimper

Makers and engineers are always making cables. It's a cakewalk with the proper tools, but a nightmare without.

Buy Now

12-in-1 Ratchet Screwdriver

Engineers often carry around a set of tiny screwdrivers. This 12-in-1 screwdriver set replaces them all, and also includes a variety of TORX bits.

Buy Now

Diagonal Cutter

Designed for snipping wire, diagonal cutting pliers are another essential tool in a maker's arsenal.

Buy Now

LED Pivoting Work Light

We've all had those frustrating experiences where our hands blocked our light and we couldn't see what we were soldering. This tiny work light is a lifesaver with those types of problems.

Buy Now

STEM Students Wish List

Find something fun and educational for the aspiring engineers you know!

Waveform generator

Electrical signals aren't just flat lines; you've got sine waves, audio signals, and all kinds of other waveforms. A waveform generator supplies the signals necessary for various designs and testing.

Buy NowBuy Now

65W Soldering Station

Buy NowBuy Now

25MHz PC Oscilloscope

We've already discussed oscilloscopes and how important they are in a lab; this one connects to a PC via USB.

Buy NowBuy Now

Variety of Passive Components

To build circuits on the breadboard, you'll need a variety of passives, like resistors, capacitors and more. Here are two kits that give you plenty to work with.

Thru hole resistor kit

Buy NowBuy Now

Capacitor kit

Buy NowBuy Now

Bench Power Supply

Every circuit (well almost!) requires power. Every lab needs a solid and reliable DC power supply.

Buy NowBuy Now

Breadboard kit

Breadboards let you build circuits without soldering.

Buy NowBuy Now

Long Nose Pliers

Moving these tiny wires around requires a reliable pair of pliers.

Buy NowBuy Now

BBC micro:bit

The micro:bit is a pocket sized computer designed to introduce students to engineering and to connect the gap between software and hardware.

For more micro::bit, check out our dedicated microbit space: micro:bit

Buy NowBuy Now

There are plenty of micro::bit add-ons available that help students build fun projects of all types. Here are two examples:

Climate Action Kit

Buy NowBuy Now

Totem Spider

Buy NowBuy Now

Raspberry Pi

A Raspberry Pi is a Single Board Computer (SBC), a fully functioning computer built onto a compact board. They're fully programmable and able to host a variety of sensors, robotics and more.

For more information on Raspberry Pi, check out Raspberry Pi Projects

Buy NowBuy Now

There are also plenty of accessories for Raspberry Pi, expanding its functionality to just about anything. Here are two examples:

JustBoom Amp HAT for Raspberry Pi

Buy NowBuy Now

Unicorn HAT Development Board

Buy NowBuy Now

EE Wish List

How do shop for someone who would rather build it themselves? From this Electrical Engineer's wish list, of course!

Oscilloscope

An oscilloscope is every bit as important as a multimeter. A good one will also last a lifetime; I remember using some ancient oscilloscopes in some of my labs.

Buy NowBuy Now

Resistance Decade Box

A resistance decade box lets you simulate different resistance loads to test your circuits.

Buy NowBuy Now

Switch Mode Power Supply, 1.6A, 60V, 3 outputs

This bench power supply provides plenty of juice for most projects.

Buy NowBuy Now

Bench Multimeter

Every engineer needs a multimeter. A heavy duty bench multimeter is a great investment that will last the an EE's entire career.

Buy NowBuy Now

Personal Static Eliminator / Ionizer

Ionizers throw ions in the air so they can neutralize any charges at the bench, helping to prevent Electrostatic Discharge.

Buy NowBuy Now

Antistatic Cabinet

All your tiny passives and ICs should ideally be stored in a static free environment. Specialized cabinets provide a nice way to organize all your parts.

Buy NowBuy Now

Antistatic Toolbox

Your tools can also be a source of ESD. Storing them in an antistatic toolbox reduces that risk.

Buy NowBuy Now

Passives

A variety of passives like resistors and capacitors is a must on any bench. These kits are surface mount; check out the maker's and STEM lists for the thru-hole versions.

Surface Mount Resistor Kit

Buy NowBuy Now

SMD Capacitor Kit

Buy NowBuy Now

LCR meter for Surface Mount Devices

Measuring values of tiny SMD components is a huge pain. A tweezer probe makes things a lot easier!

Buy NowBuy Now

Clamp Meter

A clamp multimeter lets you measure current by clamping its hinged jaw on a wire.

Buy NowBuy Now

Cable Tie Kit

Colored cable ties are a good way to organize the wire spaghetti behind your instruments. The discipline is remembering which color you used for what bundle.

Buy NowBuy Now

Heavy Duty Stripper / Crimper

Engineers spend a lot of their time making cables and stripping wire. The proper tool makes that job 100x easier. Take it from me, I used to use fingernail clippers and my lab partner used his teeth.

Buy NowBuy Now

Wrist strap

Because people can also be a source of electrostatic energy, grounding yourself with a wrist strap is always a good idea.

Buy NowBuy Now

Maker Wishlist - What do I buy a Maker?- Holidays on element14

dychen — Sat, 20 Nov 2021 13:48:54 GMT

Revision 2 posted to Documents by dychen on 11/20/2021 1:48:54 PM

Deck the Bench Holiday Wish List

The holidays are upon us, and once again we're back with our wish list of gifts for Makers, Engineers, and anyone aspiring to be one!

While the wish list is divided by Makers, STEM Students, and Engineers, there are absolutely no rules! All of these products would be useful to any techie looking to work with electronics.

Check out the rest of our Holiday Events here: Deck the Bench 2021 - element14 Holiday Round up

Secret Santa Giveaway

This holiday season, we're doing our own version of a Secret Santa giveaway! Here's how it works:

Your Gift to the Community

Write a blog detailing your idea of the perfect gift for a Maker or Engineer. Tell us why you think it's the perfect gift, and why it's a tool that an Engineer, Maker, or STEM student would really need.
The gift should be a product available Newark or Farnell that costs under $50, and preferably in stock.
We'll pick our 20 favorite blogs. The 20 winners will each receive a gift -- a tool that one of the other 20 winners blogged about!

You might wonder how we match each of the 20 winners with one of the 20 gifts. Well, we're not telling! That's why they call it Secret Santa!

Secret Santa Giveaway 2021 - Holidays on element14

Maker's Wish List

If you have a friend or family member who's always building the coolest gadgets and contraptions, this list is for you!

Switch Mode Power Supply, 3A, 36V, 3 outputs

Unless you've got an infinite supply of batteries, an adjustable power supply is a requirement for design and testing.

Buy Now

Hand Held 6MHz Scope and Digital Multimeter

An Oscilloscope is an extremely important tool on a maker's bench. Most scopes are large and heavy, but this one is handheld. Throw it in your toolbox and go!

Buy Now

Sound Level Meter

For any projects involving audio (or environmental noise), a sound level meter is invaluable.

Buy Now

A Variety of Passive Components

Thru hole resistor kit

Buy Now

Thru hole capacitor kit

Buy Now

Handheld Multimeter

Multimeters are requirements for any maker or engineer, and handheld DMM is incredibly convenient.

Buy Now

PCB repair kit

Lifting the trace on a PCB can be annoying, especially when you try to fix it and screw it up even worse. Or is that just me? A PCB Repair Kit makes is a lot easier to fix up PCBs.

Buy Now

Voltage Tester

Small probes make it very easy to test the voltage across components. Easy and inexpensive for someone who likes to repair things.

Buy Now

Distance Meter

This handy device uses a laser to give an accurate reading of distances up to 20m.

Buy Now

5-in-1 Cutter, Stripper, Crimper

Makers and engineers are always making cables. It's a cakewalk with the proper tools, but a nightmare without.

Buy Now

12-in-1 Ratchet Screwdriver

Engineers often carry around a set of tiny screwdrivers. This 12-in-1 screwdriver set replaces them all, and also includes a variety of TORX bits.

Buy Now

Diagonal Cutter

Designed for snipping wire, diagonal cutting pliers are another essential tool in a maker's arsenal.

Buy Now

LED Pivoting Work Light

We've all had those frustrating experiences where our hands blocked our light and we couldn't see what we were soldering. This tiny work light is a lifesaver with those types of problems.

Buy Now

STEM Students Wish List

Find something fun and educational for the aspiring engineers you know!

Waveform generator

Electrical signals aren't just flat lines; you've got sine waves, audio signals, and all kinds of other waveforms. A waveform generator supplies the signals necessary for various designs and testing.

Buy NowBuy Now

65W Soldering Station

Buy NowBuy Now

25MHz PC Oscilloscope

We've already discussed oscilloscopes and how important they are in a lab; this one connects to a PC via USB.

Buy NowBuy Now

Variety of Passive Components

To build circuits on the breadboard, you'll need a variety of passives, like resistors, capacitors and more. Here are two kits that give you plenty to work with.

Thru hole resistor kit

Buy NowBuy Now

Capacitor kit

Buy NowBuy Now

Bench Power Supply

Every circuit (well almost!) requires power. Every lab needs a solid and reliable DC power supply.

Buy NowBuy Now

Breadboard kit

Breadboards let you build circuits without soldering.

Buy NowBuy Now

Long Nose Pliers

Moving these tiny wires around requires a reliable pair of pliers.

Buy NowBuy Now

BBC micro:bit

The micro:bit is a pocket sized computer designed to introduce students to engineering and to connect the gap between software and hardware.

For more micro::bit, check out our dedicated microbit space: micro:bit

Buy NowBuy Now

There are plenty of micro::bit add-ons available that help students build fun projects of all types. Here are two examples:

Climate Action Kit

Buy NowBuy Now

Totem Spider

Buy NowBuy Now

Raspberry Pi

A Raspberry Pi is a Single Board Computer (SBC), a fully functioning computer built onto a compact board. They're fully programmable and able to host a variety of sensors, robotics and more.

For more information on Raspberry Pi, check out Raspberry Pi Projects

Buy NowBuy Now

There are also plenty of accessories for Raspberry Pi, expanding its functionality to just about anything. Here are two examples:

JustBoom Amp HAT for Raspberry Pi

Buy NowBuy Now

Unicorn HAT Development Board

Buy NowBuy Now

EE Wish List

How do shop for someone who would rather build it themselves? From this Electrical Engineer's wish list, of course!

Oscilloscope

An oscilloscope is every bit as important as a multimeter. A good one will also last a lifetime; I remember using some ancient oscilloscopes in some of my labs.

Buy NowBuy Now

Resistance Decade Box

A resistance decade box lets you simulate different resistance loads to test your circuits.

Buy NowBuy Now

Switch Mode Power Supply, 1.6A, 60V, 3 outputs

This bench power supply provides plenty of juice for most projects.

Buy NowBuy Now

Bench Multimeter

Every engineer needs a multimeter. A heavy duty bench multimeter is a great investment that will last the an EE's entire career.

Buy NowBuy Now

Personal Static Eliminator / Ionizer

Ionizers throw ions in the air so they can neutralize any charges at the bench, helping to prevent Electrostatic Discharge.

Buy NowBuy Now

Antistatic Cabinet

All your tiny passives and ICs should ideally be stored in a static free environment. Specialized cabinets provide a nice way to organize all your parts.

Buy NowBuy Now

Antistatic Toolbox

Your tools can also be a source of ESD. Storing them in an antistatic toolbox reduces that risk.

Buy NowBuy Now

Passives

A variety of passives like resistors and capacitors is a must on any bench. These kits are surface mount; check out the maker's and STEM lists for the thru-hole versions.

Surface Mount Resistor Kit

Buy NowBuy Now

SMD Capacitor Kit

Buy NowBuy Now

LCR meter for Surface Mount Devices

Measuring values of tiny SMD components is a huge pain. A tweezer probe makes things a lot easier!

Buy NowBuy Now

Clamp Meter

A clamp multimeter lets you measure current by clamping its hinged jaw on a wire.

Buy NowBuy Now

Cable Tie Kit

Colored cable ties are a good way to organize the wire spaghetti behind your instruments. The discipline is remembering which color you used for what bundle.

Buy NowBuy Now

Heavy Duty Stripper / Crimper

Engineers spend a lot of their time making cables and stripping wire. The proper tool makes that job 100x easier. Take it from me, I used to use fingernail clippers and my lab partner used his teeth.

Buy NowBuy Now

Wrist strap

Because people can also be a source of electrostatic energy, grounding yourself with a wrist strap is always a good idea.

Buy NowBuy Now

Maker Wishlist - What do I buy a Maker?- Holidays on element14

e14phil — Sat, 20 Nov 2021 02:49:05 GMT

Revision 1 posted to Documents by e14phil on 11/20/2021 2:49:05 AM

Deck the Bench Holiday Wish List

The holidays are upon us, and once again we're back with our wish list of gifts for Makers, Engineers, and anyone aspiring to be one!

While the wish list is divided by Makers, STEM Students, and Engineers, there are absolutely no rules! All of these products would be useful to any techie looking to work with electronics.

Check out the rest of our Holiday Events here: Deck the Bench 2021 - element14 Holiday Round up

Secret Santa Giveaway

This holiday season, we're doing our own version of a Secret Santa giveaway! Here's how it works:

Your Gift to the Community

Write a blog detailing your idea of the perfect gift for a Maker or Engineer. Tell us why you think it's the perfect gift, and why it's a tool that an Engineer, Maker, or STEM student would really need.
The gift should be a product available Newark or Farnell that costs under $50, and preferably in stock.
We'll pick our 20 favorite blogs. The 20 winners will each receive a gift -- a tool that one of the other 20 winners blogged about!

You might wonder how we match each of the 20 winners with one of the 20 gifts. Well, we're not telling! That's why they call it Secret Santa!

Secret Santa Giveaway 2021 - Holidays on element14

Maker's Wish List

If you have a friend or family member who's always building the coolest gadgets and contraptions, this list is for you!

Switch Mode Power Supply, 3A, 36V, 3 outputs

Unless you've got an infinite supply of batteries, an adjustable power supply is a requirement for design and testing.

Buy NowBuy Now

Hand Held 6MHz Scope and Digital Multimeter

An Oscilloscope is an extremely important tool on a maker's bench. Most scopes are large and heavy, but this one is handheld. Throw it in your toolbox and go!

Buy NowBuy Now

Sound Level Meter

For any projects involving audio (or environmental noise), a sound level meter is invaluable.

Buy NowBuy Now

A Variety of Passive Components

Thru hole resistor kit

Buy NowBuy Now

Thru hole capacitor kit

Buy NowBuy Now

Handheld Multimeter

Multimeters are requirements for any maker or engineer, and handheld DMM is incredibly convenient.

Buy NowBuy Now

PCB repair kit

Lifting the trace on a PCB can be annoying, especially when you try to fix it and screw it up even worse. Or is that just me? A PCB Repair Kit makes is a lot easier to fix up PCBs.

Buy NowBuy Now

Voltage Tester

Small probes make it very easy to test the voltage across components. Easy and inexpensive for someone who likes to repair things.

Buy NowBuy Now

Distance Meter

This handy device uses a laser to give an accurate reading of distances up to 20m.

Buy NowBuy Now

5-in-1 Cutter, Stripper, Crimper

Makers and engineers are always making cables. It's a cakewalk with the proper tools, but a nightmare without.

Buy NowBuy Now

12-in-1 Ratchet Screwdriver

Engineers often carry around a set of tiny screwdrivers. This 12-in-1 screwdriver set replaces them all, and also includes a variety of TORX bits.

Buy NowBuy Now

Diagonal Cutter

Designed for snipping wire, diagonal cutting pliers are another essential tool in a maker's arsenal.

Buy NowBuy Now

LED Pivoting Work Light

We've all had those frustrating experiences where our hands blocked our light and we couldn't see what we were soldering. This tiny work light is a lifesaver with those types of problems.

Buy NowBuy Now

STEM Students Wish List

Find something fun and educational for the aspiring engineers you know!

Waveform generator

Electrical signals aren't just flat lines; you've got sine waves, audio signals, and all kinds of other waveforms. A waveform generator supplies the signals necessary for various designs and testing.

Buy NowBuy Now

65W Soldering Station

Buy NowBuy Now

25MHz PC Oscilloscope

We've already discussed oscilloscopes and how important they are in a lab; this one connects to a PC via USB.

Buy NowBuy Now

Variety of Passive Components

To build circuits on the breadboard, you'll need a variety of passives, like resistors, capacitors and more. Here are two kits that give you plenty to work with.

Thru hole resistor kit

Buy NowBuy Now

Capacitor kit

Buy NowBuy Now

Bench Power Supply

Every circuit (well almost!) requires power. Every lab needs a solid and reliable DC power supply.

Buy NowBuy Now

Breadboard kit

Breadboards let you build circuits without soldering.

Buy NowBuy Now

Long Nose Pliers

Moving these tiny wires around requires a reliable pair of pliers.

Buy NowBuy Now

BBC micro:bit

The micro:bit is a pocket sized computer designed to introduce students to engineering and to connect the gap between software and hardware.

For more micro::bit, check out our dedicated microbit space: micro:bit

Buy NowBuy Now

There are plenty of micro::bit add-ons available that help students build fun projects of all types. Here are two examples:

Climate Action Kit

Buy NowBuy Now

Totem Spider

Buy NowBuy Now

Raspberry Pi

A Raspberry Pi is a Single Board Computer (SBC), a fully functioning computer built onto a compact board. They're fully programmable and able to host a variety of sensors, robotics and more.

For more information on Raspberry Pi, check out Raspberry Pi Projects

Buy NowBuy Now

There are also plenty of accessories for Raspberry Pi, expanding its functionality to just about anything. Here are two examples:

JustBoom Amp HAT for Raspberry Pi

Buy NowBuy Now

Unicorn HAT Development Board

Buy NowBuy Now

EE Wish List

How do shop for someone who would rather build it themselves? From this Electrical Engineer's wish list, of course!

Oscilloscope

An oscilloscope is every bit as important as a multimeter. A good one will also last a lifetime; I remember using some ancient oscilloscopes in some of my labs.

Buy NowBuy Now

Resistance Decade Box

A resistance decade box lets you simulate different resistance loads to test your circuits.

Buy NowBuy Now

Switch Mode Power Supply, 1.6A, 60V, 3 outputs

This bench power supply provides plenty of juice for most projects.

Buy NowBuy Now

Bench Multimeter

Every engineer needs a multimeter. A heavy duty bench multimeter is a great investment that will last the an EE's entire career.

Buy NowBuy Now

Personal Static Eliminator / Ionizer

Ionizers throw ions in the air so they can neutralize any charges at the bench, helping to prevent Electrostatic Discharge.

Buy NowBuy Now

Antistatic Cabinet

All your tiny passives and ICs should ideally be stored in a static free environment. Specialized cabinets provide a nice way to organize all your parts.

Buy NowBuy Now

Antistatic Toolbox

Your tools can also be a source of ESD. Storing them in an antistatic toolbox reduces that risk.

Buy NowBuy Now

Passives

A variety of passives like resistors and capacitors is a must on any bench. These kits are surface mount; check out the maker's and STEM lists for the thru-hole versions.

Surface Mount Resistor Kit

Buy NowBuy Now

SMD Capacitor Kit

Buy NowBuy Now

LCR meter for Surface Mount Devices

Measuring values of tiny SMD components is a huge pain. A tweezer probe makes things a lot easier!

Buy NowBuy Now

Clamp Meter

A clamp multimeter lets you measure current by clamping its hinged jaw on a wire.

Buy NowBuy Now

Cable Tie Kit

Colored cable ties are a good way to organize the wire spaghetti behind your instruments. The discipline is remembering which color you used for what bundle.

Buy NowBuy Now

Heavy Duty Stripper / Crimper

Engineers spend a lot of their time making cables and stripping wire. The proper tool makes that job 100x easier. Take it from me, I used to use fingernail clippers and my lab partner used his teeth.

Buy NowBuy Now

Wrist strap

Because people can also be a source of electrostatic energy, grounding yourself with a wrist strap is always a good idea.

Buy NowBuy Now

Maker Wishlist - What do I buy a Maker?- Holidays on element14

migration.user — Fri, 19 Nov 2021 19:09:26 GMT

Revision 13 posted to Documents by migration.user on 11/19/2021 7:09:26 PM

Deck the Bench Holiday Wish List

players.brightcove.net/.../index.html

The holidays are upon us, and once again we're back with our wish list of gifts for Makers, Engineers, and anyone aspiring to be one!

While the wish list is divided by Makers, STEM Students, and Engineers, there are absolutely no rules! All of these products would be useful to any techie looking to work with electronics.

Check out the rest of our Holiday Events here: Deck the Bench 2021 - element14 Holiday Round up

Secret Santa Giveaway

This holiday season, we're doing our own version of a Secret Santa giveaway! Here's how it works:

Your Gift to the Community

Write a blog detailing your idea of the perfect gift for a Maker or Engineer. Tell us why you think it's the perfect gift, and why it's a tool that an Engineer, Maker, or STEM student would really need.
The gift should be a product available Newark or Farnell that costs under $50, and preferably in stock.
We'll pick our 20 favorite blogs. The 20 winners will each receive a gift -- a tool that one of the other 20 winners blogged about!

You might wonder how we match each of the 20 winners with one of the 20 gifts. Well, we're not telling! That's why they call it Secret Santa!

Secret Santa Giveaway 2021 - Holidays on element14

Maker's Wish List

If you have a friend or family member who's always building the coolest gadgets and contraptions, this list is for you!

Switch Mode Power Supply, 3A, 36V, 3 outputs

Unless you've got an infinite supply of batteries, an adjustable power supply is a requirement for design and testing.

Buy NowBuy Now

Hand Held 6MHz Scope and Digital Multimeter

An Oscilloscope is an extremely important tool on a maker's bench. Most scopes are large and heavy, but this one is handheld. Throw it in your toolbox and go!

Buy NowBuy Now

Sound Level Meter

For any projects involving audio (or environmental noise), a sound level meter is invaluable.

Buy NowBuy Now

A Variety of Passive Components

Thru hole resistor kit

Buy NowBuy Now

Thru hole capacitor kit

Buy NowBuy Now

Handheld Multimeter

Multimeters are requirements for any maker or engineer, and handheld DMM is incredibly convenient.

Buy NowBuy Now

PCB repair kit

Lifting the trace on a PCB can be annoying, especially when you try to fix it and screw it up even worse. Or is that just me? A PCB Repair Kit makes is a lot easier to fix up PCBs.

Buy NowBuy Now

Voltage Tester

Small probes make it very easy to test the voltage across components. Easy and inexpensive for someone who likes to repair things.

Buy NowBuy Now

Distance Meter

This handy device uses a laser to give an accurate reading of distances up to 20m.

Buy NowBuy Now

5-in-1 Cutter, Stripper, Crimper

Makers and engineers are always making cables. It's a cakewalk with the proper tools, but a nightmare without.

Buy NowBuy Now

12-in-1 Ratchet Screwdriver

Engineers often carry around a set of tiny screwdrivers. This 12-in-1 screwdriver set replaces them all, and also includes a variety of TORX bits.

Buy NowBuy Now

Diagonal Cutter

Designed for snipping wire, diagonal cutting pliers are another essential tool in a maker's arsenal.

Buy NowBuy Now

LED Pivoting Work Light

We've all had those frustrating experiences where our hands blocked our light and we couldn't see what we were soldering. This tiny work light is a lifesaver with those types of problems.

Buy NowBuy Now

STEM Students Wish List

Find something fun and educational for the aspiring engineers you know!

Waveform generator

Electrical signals aren't just flat lines; you've got sine waves, audio signals, and all kinds of other waveforms. A waveform generator supplies the signals necessary for various designs and testing.

Buy NowBuy Now

65W Soldering Station

Buy NowBuy Now

25MHz PC Oscilloscope

We've already discussed oscilloscopes and how important they are in a lab; this one connects to a PC via USB.

Buy NowBuy Now

Variety of Passive Components

To build circuits on the breadboard, you'll need a variety of passives, like resistors, capacitors and more. Here are two kits that give you plenty to work with.

Thru hole resistor kit

Buy NowBuy Now

Capacitor kit

Buy NowBuy Now

Bench Power Supply

Every circuit (well almost!) requires power. Every lab needs a solid and reliable DC power supply.

Buy NowBuy Now

Breadboard kit

Breadboards let you build circuits without soldering.

Buy NowBuy Now

Long Nose Pliers

Moving these tiny wires around requires a reliable pair of pliers.

Buy NowBuy Now

BBC micro:bit

The micro:bit is a pocket sized computer designed to introduce students to engineering and to connect the gap between software and hardware.

For more micro::bit, check out our dedicated microbit space: micro:bit

Buy NowBuy Now

There are plenty of micro::bit add-ons available that help students build fun projects of all types. Here are two examples:

Climate Action Kit

Buy NowBuy Now

Totem Spider

Buy NowBuy Now

Raspberry Pi

A Raspberry Pi is a Single Board Computer (SBC), a fully functioning computer built onto a compact board. They're fully programmable and able to host a variety of sensors, robotics and more.

For more information on Raspberry Pi, check out Raspberry Pi Projects

Buy NowBuy Now

There are also plenty of accessories for Raspberry Pi, expanding its functionality to just about anything. Here are two examples:

JustBoom Amp HAT for Raspberry Pi

Buy NowBuy Now

Unicorn HAT Development Board

Buy NowBuy Now

EE Wish List

How do shop for someone who would rather build it themselves? From this Electrical Engineer's wish list, of course!

Oscilloscope

An oscilloscope is every bit as important as a multimeter. A good one will also last a lifetime; I remember using some ancient oscilloscopes in some of my labs.

Buy NowBuy Now

Resistance Decade Box

A resistance decade box lets you simulate different resistance loads to test your circuits.

Buy NowBuy Now

Switch Mode Power Supply, 1.6A, 60V, 3 outputs

This bench power supply provides plenty of juice for most projects.

Buy NowBuy Now

Bench Multimeter

Every engineer needs a multimeter. A heavy duty bench multimeter is a great investment that will last the an EE's entire career.

Buy NowBuy Now

Personal Static Eliminator / Ionizer

Ionizers throw ions in the air so they can neutralize any charges at the bench, helping to prevent Electrostatic Discharge.

Buy NowBuy Now

Antistatic Cabinet

All your tiny passives and ICs should ideally be stored in a static free environment. Specialized cabinets provide a nice way to organize all your parts.

Buy NowBuy Now

Antistatic Toolbox

Your tools can also be a source of ESD. Storing them in an antistatic toolbox reduces that risk.

Buy NowBuy Now

Passives

A variety of passives like resistors and capacitors is a must on any bench. These kits are surface mount; check out the maker's and STEM lists for the thru-hole versions.

Surface Mount Resistor Kit

Buy NowBuy Now

SMD Capacitor Kit

Buy NowBuy Now

LCR meter for Surface Mount Devices

Measuring values of tiny SMD components is a huge pain. A tweezer probe makes things a lot easier!

Buy NowBuy Now

Clamp Meter

A clamp multimeter lets you measure current by clamping its hinged jaw on a wire.

Buy NowBuy Now

Cable Tie Kit

Colored cable ties are a good way to organize the wire spaghetti behind your instruments. The discipline is remembering which color you used for what bundle.

Buy NowBuy Now

Heavy Duty Stripper / Crimper

Engineers spend a lot of their time making cables and stripping wire. The proper tool makes that job 100x easier. Take it from me, I used to use fingernail clippers and my lab partner used his teeth.

Buy NowBuy Now

Wrist strap

Because people can also be a source of electrostatic energy, grounding yourself with a wrist strap is always a good idea.

Buy NowBuy Now

Tags: maker, stem, gift buying guide, student, secretsanta, holidays, 2021, engineers, wish list