/products/arduino/arduino-projects/b/blog/posts/diy-thermocam---an-open-source-do-it-yourself-thermal-imagerDIY-Thermocam - An open-source, do-it-yourself thermal imager The DIY-Thermocam is a do-it-yourself, low-cost thermographic camera based upon the famous Teensy 3.2 mikrocontroller. It uses a long-wave infrared sensor from FLIR to provide h...en-USTelligent Community 12https://community.element14.com/products/arduino/arduino-projects/b/blog/posts/diy-thermocam---an-open-source-do-it-yourself-thermal-imagerFri, 08 Jan 2016 01:19:29 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:d078de35-3132-4b5c-8aa4-943b5f6d694fshabaz1<p>This looks great, but 429 euro is still pricey though.</p><p>For lower resolution, there is an open source <a class="jive-link-external-small" href="http://www.element14.com/community/community/designcenter/single-board-computers/next-gen_beaglebone/blog/2013/06/07/bbb--building-a-thermal-imaging-camera" target="_blank">BeagleBone Black Thermal Imaging Camera</a> here. It uses a Melexis sensor but nowadays</p><p>would be better (and cheaper) to replace with Panasonic Grid-Eye (£28+VAT).</p><p>The project uses a $7 colour LCD screen, and bilinear interpolation to produce a reasonable image out of</p><p>the low-resolution sensor, <span>and works quite well with video here the individual fingers of a hand are visible.</span></p><p>&nbsp;</p><p><span>[View:https://players.brightcove.net/1362235890001/NkxiVJdjx_default/index.html?videoId=2457314857001:480:270]</span></p><img src="https://community.element14.com/aggbug?PostID=1016&AppID=149&AppType=Weblog&ContentType=0" width="1" height="1">