Greetings,
I was wondering if the Avnet ZedBoard 7020 is compatible with other Analog Devices FMC module other than the AD-FMCOMMS2-EBZ ?
For example, could we use AD-FMCDAQ2-EBZ instead of AD-FMCOMMS2-EBZ ?
The reason behind that is that I want to plug…
Hello,
We are using a Zedboard with an FMCOMMS3 ( from analog devices) for a detector system. The executable file for standalone mode is in the SD card of the Zedboard. We are planning to send the detector for customer trials and evaluation.
How do we…
Hello,
We are using a Zedboard with an FMCOMMS3 ( from analog devices) for a detector system. The executable file for standalone mode is in the SD card of the Zedboard. We are planning to send the detector for customer trials and evaluation.
How do we…
I am looking for the tutorials listed on the| Zedboard
http://picozed.org/support/design/13076/106
Is there a list of these tutorials that someone would provide a link to?
What is the equivalent resistance to the hottest component on the PicoZed 7010/7020 SOM? I believe this is the ZYNQ component. 
Hi!
We are trying to boot from the qspi nor (32MB) that is embedded on the picozed. When we have por the image is loaded correctly.
After that, we are using the whole 32MB of the flash.
When software reset is performed, than the boot rom can't find the fsbl…
Hello Everyone,
We have purchased Zedboard with Avnet Sharp 7 inch Touch Display Kit for our end application. The reference design given was fine and able to program and configure Touch display kit.
Hello,
I have already been successful to connect to ZedBoard on my windows 10 with USB-UART port. I use Tera Term as terminal and I'm able to communicate with ZedBoard with Linux commands. I want to use the USB OTG port, such that I can view the board…
Hello,
I’m working on a digital loop back test and currently I have set everything up correctly but I’m still having “FF” showing on my data counter. I have connected the port with cable from samtec. I have my Positive A16 connected to B14, and Negative…
