I'm using Vivado 2018.1 and a Rev. F07 microZed board to try and walk through the Zed Chronicles tutorials. I'm stuck on the "Hello World," unfortunately, as I can't get XSDK to recognize the PS.
I'm using a Digilent SMT2 JTAG cable, and when I run Adept I can see both devices. In the Vivado Hardware Manager, however, I see only the 7Z020, not the DAP, and in XSDK when I try to select the PS Device in the Run Configuration there are none found (the correct cable is displayed, however). JP1-3 are set correctly for cascaded JTAG.
I also get an "FPGA initialization error" if I try to re-program the FPGA (PL), and it requires a board power cycle before I can do so (I don't know if this muddies the water or not).
Any help would be much appreciated.
-Glenn
<html><head><title>Jive SBS</title></head>
<body><font face="arial,helvetica,sans-serif">
<b>Error</b><br><font size="-1">
An general error occurred while processing your request.
</font></font></body></html>
