Modifying MicroZed for USB Device Interface

I would like to use the MicroZed as a USB Device (not Host). What hardware modifications are needed to do this? Are there any HID USB drivers that would run on a bare metal platform?

Parents

0 Former Member over 9 years ago

Hi,

FYI: I made the changes to my MicroZed board as stated in the first post and had no trouble getting the board to work in device mode. Perhaps you should review your changes just to confirm.

I've recently evaluated the mass storage device example on the MicroZed and everything worked well. See reference: http://zedboard.org/content/ise-146-version-1

I hope this helps!
Ed
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 Former Member over 9 years ago

Hi,

FYI: I made the changes to my MicroZed board as stated in the first post and had no trouble getting the board to work in device mode. Perhaps you should review your changes just to confirm.

I've recently evaluated the mass storage device example on the MicroZed and everything worked well. See reference: http://zedboard.org/content/ise-146-version-1

I hope this helps!
Ed
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data