"Embedded linux Handson tutorial" issue

I am trying to work on "Embedded Linux
Hands-on Tutorial -- ZedBoard" .pdf document avilable in "http://www.digilentinc.com/Products/Detail.cfm?NavPath=2,400,1028&Prod=Z...
".
This doc. says get design named as "ZedBoard Linux Hardware Design" from same link, and it is having support for "ISE 14.4" and not for "Vivado",
how to use the same ISE design in vivado or
there is seperate degin for Vivado?

My understnding is Vivado is replacement of ISE design suite.

Thanks & Regards
Satish.G

Parents

0 Former Member over 9 years ago

Vivado is the replacement design suite for ISE. You could complete a similar design in Vivado.

As to this tutorial, as discussed in your previous post http://zedboard.org/content/zed-board-linux-design-not-having-xpr-file-vivado-modification , you will need to contact Digilent for support. This is a Digilent tutorial and we have no files or information regarding it.

-Gary
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 Former Member over 9 years ago

Vivado is the replacement design suite for ISE. You could complete a similar design in Vivado.

As to this tutorial, as discussed in your previous post http://zedboard.org/content/zed-board-linux-design-not-having-xpr-file-vivado-modification , you will need to contact Digilent for support. This is a Digilent tutorial and we have no files or information regarding it.

-Gary
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data