Actions
Forum Thread Details
  • State Not Answered
  • Replies 1 reply
  • Subscribers 341 subscribers
  • Views 261 views
  • Users 0 members are here
Related

Issues with HDMI_Ref_Des_2013_4

Former Member

I was playing with reference designs "Bare Metal HDMI for ZedBoard
with ADI IP and ADV7511"
when I run the vHDMI_boot.bin in SD card ,the serial console was shown:
HPD changed to HI
MSEN changed to HI
and repeat
"HPD changed to HI
MSEN changed to HI"
forever
and the HDMI display was always off.
Is anyone meet this problemsuFF1F
Someone help me please!Thanks!

  • 0

    I tested the demo file (vHDMI_boot.bin renamed to boot.bin) on both a rev C and a rev D ZedBoard and it worked correctly on both.

     

    Make sure that your HDMI capable monitor is working correctly (connect to another HDMI source to test), verify that your HDMI cable is good and the the connections on both ends are good. If it still does not run as expected try on another ZedBoard if available to rule out an issue on the ZedBoard itself.

     

    -Gary