I just got the new ZUBOARD-1G and on power up, after reset, I see the following error:
qspi: Error: Incorrect logfile size (-1 bytes)
create_factest_logfile: Warning: unable to retrieve factest logfile in QSPI memo
Also when I click on HTML Dowload RAW, I get:
No Factory Test Results available
Here is my full output:
******************************************************************
*** ***
*** Avnet ZUBoard-1CG FreeRTOS "Out of the Box" Example ***
*** ***
******************************************************************
Start PHY autonegotiation
Waiting for PHY to complete autonegotiation.
autonegotiation complete
link speed for phy address 7: 1000
ERROR: DHCP request timed out
Configuring default IP 192.168.2.10
Board IP: 192.168.2.10
Netmask : 255.255.255.0
Gateway : 192.168.2.1
stts22htr: Temp Sensor Detected
stts22htr: Setup Complete
lps22hhtr: Pressure Sensor Detected
lps22hhtr: Setup Complete
qspi: FlashID=0x9D 0x70 0x19
qspi: Setup Complete
http server is running on port 80
Please point your web browser to http://192.168.2.10
qspi: Error: Incorrect logfile size (-1 bytes)
create_factest_logfile: Warning: unable to retrieve factest logfile in QSPI memo ry
ls /:
css/
favicon.ico
images/
index.html
js/
pdfs/
yui/
factest_results.html
(found 3 files, 5 directories)
http GET: index.html
http GET: css/main.css
http GET: images/Avnet_logo_tagline_rgb.png
http GET: images/zu1.png
http GET: yui/yahoo.js
http GET: yui/dom.js
http GET: yui/event.js
http GET: yui/conn.js
http GET: yui/anim.js
http GET: js/main.js
http GET: factest_results.html
http POST: switch state: 0
http GET: favicon.ico
http POST: temp read: 41.070000
http POST: pressure read: 987.561279
http POST: switch state: 0
http GET: factest_results.html
http GET: factest_results.html