https://community.element14.com/products/devtools/avnetboardscommunity/avnetboard-forums/Avnet Board Forumsen-USTelligent Community 12https://community.element14.com/products/devtools/avnetboardscommunity/avnetboard-forums/f/auboard-15p/57154/heatsink-or-fan-recommendation/237734Thu, 06 Aug 2026 14:21:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:575d8472-5465-4074-a20f-2c8f1762ba2fwolfgangfriedrichWhy not both? You have to do some math first to find a sufficient solution. Measure the part temperature and calculate the die temp. Then pick a solution that is capable of transporting enough heat away to keep the chip in the goldilocks zone.https://community.element14.com/products/devtools/avnetboardscommunity/avnetboard-forums/f/auboard-15p/57154/heatsink-or-fan-recommendationWed, 05 Aug 2026 20:57:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:11141d93-db28-48e4-91c1-06e20e7a9e96emjay26The AUBoard 15P FPGA Development Kit doesn't include a heatsink or fan. These parts can get quite hot, so I think some cooling solution is needed for most applications, even if used only in a climate-controlled space at room temperatures. The user guide lists an example heatsink part number (EA-270- H245-T710), but it's not in stock anywhere and shows minimum order quantities of 500. No example is given for a fan or how to attach it, only a description of the fan header. Can you recommend a heatsink or fan that is available for ordering and provide guidance on how to attach it? Thanks.https://community.element14.com/products/devtools/avnetboardscommunity/avnetboard-forums/f/maaxboard-hardware-design/56629/maaxboard-rt-mipi-dsi-connector-pinout/237619Fri, 31 Jul 2026 16:16:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:5c5246b8-c117-4df0-b2a9-ccbde3cf6800sprhawkHello, thanks for your information. But the display is out of stock. I want to design a converter board to other display, I need to know the voltage level of the I2C, DSI_EN, TS_nINT. Thankshttps://community.element14.com/products/devtools/avnetboardscommunity/avnetboard-forums/f/maaxboard-hardware-design/57140/how-are-additional-kernel-modules-added-to-a-yocto-avnet-image-full-bbThu, 30 Jul 2026 00:05:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:ba94b20a-7568-41b3-89c5-fac57513bf90rweaverI am following document “MaaXBoard-OSM93-Yocto-Development-Guide-6.6.52.pdf” for “Yocto Linux BSP v6.6.52” from www.tria-technologies.com/.../  to create an image for MaaXBoard-OSM93. The build completes but missing either a built-in or kernel module nft_queue.ko. The nft_queue.c file is in the …/maaxboard-osm93/build/tmp/work-shared/maaxboard-osm93/ kernel-source/net/netfilte folder but is not being generated to the nft_queue.ko module. The same result is also with avnet-image-lite.bb recipe. I have tried: Added to linux-imx_6.6.bbappend FILESEXTRAPATHS:prepend := "${THISDIR}:" SRC_URI += file://ridev_kernel.cfg ridev_kernel.cfg file contains CONFIG_NETFILTER=y CONFIG_NF_TABLES=y CONFIG_NF_TABLES_INET=y CONFIG_NF_TABLES_NETDEV=y CONFIG_NFT_QUEUE=m CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CT_NETLINK=m Added to avnet-image-full.bb or avnet-image-lite.bb in the CORE_IMAGE_EXTRA_INSTALL:append section nftables libnetfilter-queue libnftnl libmnl libnfnetlink kernel-modules Build Configuration: BB_VERSION = "2.8.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "universal" TARGET_SYS = "aarch64-poky-linux" MACHINE = "maaxboard-osm93" DISTRO = "fsl-imx-xwayland" DISTRO_VERSION = "6.6-scarthgap" TUNE_FEATURES = "aarch64 armv8a crc crypto" TARGET_FPU = "" Host OS is Ubuntu 24.04 with docker pull ubuntu:20.04 The missing module is a blocking issue. Thank you in advance for your help.https://community.element14.com/products/devtools/avnetboardscommunity/avnetboard-forums/f/auboard-15p/56666/when-will-rev-2-be-available/237570Tue, 28 Jul 2026 13:33:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:14a4e356-4042-463c-b61f-fb90343e931diksevasAll hardware related errata is resolved. The programming of the clock generator still requires the reference design to implement it.https://community.element14.com/products/devtools/avnetboardscommunity/avnetboard-forums/f/zuboard/57134/d23-power-good-pg_led-stops-working/237562Mon, 27 Jul 2026 12:11:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:f88e96be-3b72-4452-8dd3-7067f9511a5aiksevasMIO34 is controlled by the AMD device in response to an event. So, if you believe this is truly the problem then you would need to look at what events would cause the AMD device to trigger this signal. On the board, the +3V3 volt rail drives the LED. So, I would be more inclined to look at what is causing the +3V3 rail to experience problems. Perhaps something in the power sequence is getting interrupted that is causing the +3V3 rail to go down as well as the AMD device to signal MIO34 signal.https://community.element14.com/products/devtools/avnetboardscommunity/avnetboard-forums/f/auboard-15p/56666/when-will-rev-2-be-available/237561Mon, 27 Jul 2026 07:22:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:3f921384-6af2-4deb-8d89-0813cbfbebc8e2kcpuExcellent, thank you! But, which changes/errata were implemented? We have already some boards, don't like to chase know issues between teams...https://community.element14.com/products/devtools/avnetboardscommunity/avnetboard-forums/f/auboard-15p/56666/when-will-rev-2-be-available/237560Mon, 27 Jul 2026 07:04:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:3e6fa5b4-ed25-4807-bfb0-ba376aece123iksevasAES-AUB-15P-DK-G Avnet Engineering Services | Sub with Evaluation & Development Kits | Avnet AMERICAS Revision 2 boards are in-stock - these boards resolve errata of Revision 1. https://www.avnet.com/wcm/connect/047108b6-dfdc-45c6-88d7-d4fc04ff2c20/AUB-15P-DK-ERRATA-V1P3.pdf?MOD=AJPERES&attachment=true&id=1778091366215https://community.element14.com/products/devtools/avnetboardscommunity/avnetboard-forums/f/auboard-15p/56666/when-will-rev-2-be-available/237559Mon, 27 Jul 2026 06:57:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:75d98965-ecf5-4bf9-bdc3-6211eba1f2ebe2kcpuIt is warm enough now, I guess it is summer :) What else will be changed on the version 2?https://community.element14.com/products/devtools/avnetboardscommunity/avnetboard-forums/f/zuboard/57134/d23-power-good-pg_led-stops-workingSun, 26 Jul 2026 14:32:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:8af5144a-06d8-45a4-8a79-5bb0825e2530MadhusudhanRHi, The ZUBoard 1CG board was working fine, but then suddenly D23 (PG_LED) stopped glowing. D22 (VIN_LED) is fine. Upon debugging further, it is observed that the KILL_N signal U29 is getting asserted (active low). This Kill signal is coming from PS MIO pin. Can this board be recovered? If I need to find the root-cause why this happened, what might be the issue? Thanks, Madhuhttps://community.element14.com/products/devtools/avnetboardscommunity/avnetboard-forums/f/k24-development-kit/57118/aes-k24-io-dk-g-discontinued-is-there-a-replacement-part-available/237537Fri, 24 Jul 2026 13:39:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:11ca1047-3676-4f98-bc51-b04921c5e2d6cstanton[quote userid="512434" url="~/products/devtools/avnetboardscommunity/avnetboard-forums/f/k24-development-kit/57118/aes-k24-io-dk-g-discontinued-is-there-a-replacement-part-available/237516"]I tried ordering from Farnell UK but they won't let me enter a US shipping address[/quote] You can directly contact the store to see if they can arrange something for you too. Alternatively the ' export ' site may allow you to enter a US address.https://community.element14.com/products/devtools/avnetboardscommunity/avnetboard-forums/f/k24-development-kit/57118/aes-k24-io-dk-g-discontinued-is-there-a-replacement-part-available/237516Fri, 24 Jul 2026 02:09:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:76756f42-33d9-4f67-8521-dc0ec4ba859eglenncbI tried ordering from Farnell UK but they won't let me enter a US shipping address. I'll try contacting Avnet and see if I can get enough units to get through the end of the year. Bummer it's discontinued- it's a really nice compact board. Guess it's time to layout my own carrier! -GlennCBhttps://community.element14.com/products/devtools/avnetboardscommunity/avnetboard-forums/f/k24-development-kit/57118/aes-k24-io-dk-g-discontinued-is-there-a-replacement-part-available/237512Thu, 23 Jul 2026 20:50:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:58a09c1e-4227-4253-84eb-b06c20aad595mbrownFarnell shows 10pcs available --> https://uk.farnell.com/avnet/aes-k24-io-dk-g/development-kit-arm-cortex-a53/dp/4562615 Unfortunately this was discontinued. If you need production quantities, please get in contact with your local Avnet sales team. We may be able to offer a last-time-buy order to help you get to initial production.https://community.element14.com/products/devtools/avnetboardscommunity/avnetboard-forums/f/k24-development-kit/57118/aes-k24-io-dk-g-discontinued-is-there-a-replacement-part-available/236475Wed, 22 Jul 2026 13:14:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:a760daca-b5d8-481b-bf29-0cfba960872ccstantonThere's some stock available in the UK and European / Asia Pacific stores: https://uk.farnell.com/avnet/aes-k24-io-dk-g/development-kit-arm-cortex-a53/dp/4562615https://community.element14.com/products/devtools/avnetboardscommunity/avnetboard-forums/f/k24-development-kit/57118/aes-k24-io-dk-g-discontinued-is-there-a-replacement-part-availableTue, 21 Jul 2026 19:42:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:1bbcae9b-6be7-4943-ad12-4b9657c20da0glenncbI am unable to find the K24 IO carrier board in stock and it shows discontinued. Is there a replacement part available or is this board truly discontinued? Usually dev boards are available for long term so this is quite shocking to see it no longer available. Help needed! I designed this into my product and now I can't source it. -GlennCBhttps://community.element14.com/products/devtools/avnetboardscommunity/avnetboard-forums/f/general/57061/aes-zu7ev-1-som-i-g-som-module-maximum-allowable-deflection-during-environmental-vibration/236226Wed, 24 Jun 2026 21:16:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:813b70c5-f3a5-4f89-8f97-302fdcb7b67aDan_SzuchI will definitely look into IPC-2221 and IPC-2223. Thanks again.https://community.element14.com/products/devtools/avnetboardscommunity/avnetboard-forums/f/general/57061/aes-zu7ev-1-som-i-g-som-module-maximum-allowable-deflection-during-environmental-vibration/236225Wed, 24 Jun 2026 21:14:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:70dfabe8-06f5-4422-b9c7-8530d46a50bdDan_SzuchHi dougw. Thank you for your reply to my question. Adding stiffeners opposite the critical components seems appropriate for a new design. Any recommendations for ruggedizing existing CCAs that are fairly densely populated like the Avnet AES- ZU7EV-1-SOM-I-G, SOM Module? I am hoping that an Avnet SME or even one of the SOM module designers see my question and have some level of experience with vibration stresses of similar designs to offer some best practices / rules-of-thumb for solder or component stresses limits due to deflection. My original question may have too many variables to provide any meaningful answer.https://community.element14.com/products/devtools/avnetboardscommunity/avnetboard-forums/f/general/57061/aes-zu7ev-1-som-i-g-som-module-maximum-allowable-deflection-during-environmental-vibration/236224Wed, 24 Jun 2026 17:01:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:db65bb69-2332-4c3d-888f-475ae2dadaaadougwCheck IPC-2221 and IPC-2223. When PCBs are subjected to flex, they often use stiffener plates glued under large chips, so the solder joints don't see excessive stress.https://community.element14.com/products/devtools/avnetboardscommunity/avnetboard-forums/f/general/57061/aes-zu7ev-1-som-i-g-som-module-maximum-allowable-deflection-during-environmental-vibrationTue, 23 Jun 2026 19:14:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:fdc037cc-a589-48a9-a250-9b3d12b0373cDan_SzuchI have a customer application for a AES-ZU7EV-1-SOM-I-G, SOM Module that will be exposed to less than 10 minutes of a high vibration load. The vibration environment will induce some amount of deflection onto the CCA and I want to make sure the CCA is adequately supported by my enclosure design to prevent too much deflection. What is the recommended max deflection limit for the CCA to limit any damage to the CCA components and PWB?https://community.element14.com/products/devtools/avnetboardscommunity/avnetboard-forums/f/general/57060/aes-zu7ev-1-som-i-g-som-module-solder-type-used-during-fabricationTue, 23 Jun 2026 19:09:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:f620d5b6-e55c-473f-a9b9-899d04519afdDan_SzuchWhat is the solder type used during the fabrication of the AES-ZU7EV-1-SOM-I-G, SOM Module?