Sphere ADC Document

skruglewicz — Sun, 17 May 2020 22:27:47 GMT

Current Revision posted to Documents by skruglewicz on 5/17/2020 10:27:47 PM

For a NEW project, I am connecting a Heart Rate Sensor that I have from another project to my Avnet MT3620.

The project uses the Raspberry PI and a circuit on a breadboard. The code is written In C.

The circuit (Depicted below), contains an ADC chip that takes a signal from the heart Sensor into an analog input pin on the ADC

This project is working great for me on a Raspberry PI . Here is the link to the project from the vendor of the Heart Pulse sensor.

https://github.com/WorldFamousElectronics/Raspberry_Pi/blob/master/PulseSensor_C_Pi/PulseSensor_C_Pi.md

The Sensor and the ADC used are Summarized in the section

RasPI Project

For my NEW Project Beats Per Minute -- Home Is Where the Hack Is Challenge ,I would hope that I can use this project as an model of How to connect and read a sensor directly to the MT3620 and port the code to the Sphere SDK.

RasPI Project

community.element14.com/.../contentimage_5F00_135870.html