Avnet Boards BlogBlogs for the Avnet Boards Communityhttps://community.element14.com/products/devtools/avnetboardscommunity/b/blog/atomTelligent Community (Build: 12.1.9.35025)2021-09-01T03:14:00ZProgramming the Clock Generator Reference Design – 2024.1 Is NOT Workinghttps://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/programming-the-clock-generator-reference-design-2024-1-is-not-working2026-01-09T16:30:35Z2026-01-09T16:30:35ZI am stuck at the Vitis Select OS and Processor step in the : Programming the Clock Generator Reference Design – 2024.1.
I used the prebuilt xsa file to generate a Vitis package: The Software never displays an OS and Processor selection for the...(<a href="https://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/programming-the-clock-generator-reference-design-2024-1-is-not-working">read more</a>)<img src="https://community.element14.com/aggbug?PostID=29450&AppID=181&AppType=Weblog&ContentType=0" width="1" height="1">Umallikhttps://community.element14.com/members/umallikBenchmarking Edge Impulse on Avnet's MaaXBoardhttps://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/installing-and-benchmarking-edge-impulse-on-avnet-s-maaxboard2024-01-19T19:49:08Z2024-01-19T19:49:08Z
Introduction
This will walk you through setting up your MaaXBoard with the hardware and software you must have, direct you through changes to make on an Edge impulse project and additional package installation steps, and result in r...(<a href="https://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/installing-and-benchmarking-edge-impulse-on-avnet-s-maaxboard">read more</a>)<img src="https://community.element14.com/aggbug?PostID=27466&AppID=181&AppType=Weblog&ContentType=0" width="1" height="1">fononyehttps://community.element14.com/members/fononyeZUBoard Chronicleshttps://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/zuboard-chronicles2022-08-31T21:18:00Z2022-08-31T21:18:00ZZUBoard Blogs
<a href="/products/devtools/avnetboardscommunity/b/blog/posts/zuboard-1cg-1-defining-a-product-in-today-s-market" rel="noopener noreferrer" target="_blank">ZUBoard 1CG #1 – Defining a Product in Today’s Market</a>
<a href="/products/devtools/avnetboardscommunity/b/blog/posts/zuboard-1cg-2-how-to-begin-system-architecture" rel="noopener noreferrer" target="_blank">ZUBoard 1CG #2 – How to Begin System Architecture</a>
<a href="/products/devtools/avnetboardscommunity/b/blog/posts/the-zuboard-1cg-at-embedded-vision-summit-embedded-world-and-sensors-converge" rel="noopener noreferrer" target="_blank">The ZUBoard 1CG at Embedded Vision Summit, Embedded World, and Sensors Converge</a>
<a href="/products/devtools/avnetboardscommunity/b/blog/posts/zuboard-1cg-3---getting-started-with-schematic-capture" rel="noopener noreferrer" target="_blank">ZUBoard 1CG #3 - Getting Started ...</a>(<a href="https://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/zuboard-chronicles">read more</a>)<img src="https://community.element14.com/aggbug?PostID=24316&AppID=181&AppType=Weblog&ContentType=0" width="1" height="1">narrucmothttps://community.element14.com/members/narrucmotZUBoard 1CG #3 - Getting Started with Schematic Capturehttps://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/zuboard-1cg-3---getting-started-with-schematic-capture2022-06-29T21:57:00Z2022-06-29T21:57:00Z
Beginning Schematic Capture
Challenges of Schematic Capture
Defining Variants within Altium, reasoning behind defining different builds
Finalizing Schematics, Review process ect.
Schematic Capture can be considered a daunting task especially whe...(<a href="https://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/zuboard-1cg-3---getting-started-with-schematic-capture">read more</a>)<img src="https://community.element14.com/aggbug?PostID=23894&AppID=181&AppType=Weblog&ContentType=0" width="1" height="1">jafoste4https://community.element14.com/members/jafoste4The ZUBoard 1CG at Embedded Vision Summit, Embedded World, and Sensors Convergehttps://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/the-zuboard-1cg-at-embedded-vision-summit-embedded-world-and-sensors-converge2022-06-28T21:56:00Z2022-06-28T21:56:00ZThe ZUBoard 1CG at Embedded Vision Summit, Embedded World, and Sensors Converge
I wanted to discuss with everyone the ZUBoard 1CG and showcase some of the amazing work being done around it. In particular I wanted to dig into what this board is along ...(<a href="https://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/the-zuboard-1cg-at-embedded-vision-summit-embedded-world-and-sensors-converge">read more</a>)<img src="https://community.element14.com/aggbug?PostID=23884&AppID=181&AppType=Weblog&ContentType=0" width="1" height="1">jafoste4https://community.element14.com/members/jafoste4ZUBoard 1CG #2 – How to Begin System Architecturehttps://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/zuboard-1cg-2-how-to-begin-system-architecture2022-06-28T01:14:00Z2022-06-28T01:14:00Z
How to begin, system architecture
Pin Mapping of a Xilinx Device
Defining Chip Sets used
What meets your system Architecture design
Todays Chip Challenges, putting this as a top priority
Order Now!
When beginning your system archite...(<a href="https://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/zuboard-1cg-2-how-to-begin-system-architecture">read more</a>)<img src="https://community.element14.com/aggbug?PostID=23877&AppID=181&AppType=Weblog&ContentType=0" width="1" height="1">jafoste4https://community.element14.com/members/jafoste4ZUBoard -- A New Xilinx Board to Upgrade Your MiniZedhttps://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/zuboard-compared-to-minized2022-06-16T23:04:00Z2022-06-16T23:04:00ZZUBoard 1CG Announced
Avnet announced the ZUBoard 1CG in May and went on to show the prototypes at the Embedded Vision Summit. The prototypes will be demonstrated at Embedded World in Germany next week as well and Sensors Converge later this month.
<a href="https://news.avnet.com/press-releases/press-release-details/2022/Avnet-Launches-ZUBoard-Development-Kit-based-on-the-Newest--AMD-Xilinx-Zynq-UltraScale-MPSoC-Device/default.aspx" rel="noopener noreferrer" target="_blank" data-e14adj="t">h...</a>(<a href="https://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/zuboard-compared-to-minized">read more</a>)<img src="https://community.element14.com/aggbug?PostID=23820&AppID=181&AppType=Weblog&ContentType=0" width="1" height="1">bhfletcherhttps://community.element14.com/members/bhfletcherZUBoard 1CG #1 – Defining a Product in Today’s Markethttps://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/zuboard-1cg-1-defining-a-product-in-today-s-market2022-06-01T16:46:00Z2022-06-01T16:46:00ZHello all!
With the ZUBoard 1CG now being released I wanted to take some time and bring you through a blog series highlighting what went into the creation of the ZUBoard 1CG development kit. In particular we are going to discuss everything from defin...(<a href="https://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/zuboard-1cg-1-defining-a-product-in-today-s-market">read more</a>)<img src="https://community.element14.com/aggbug?PostID=23706&AppID=181&AppType=Weblog&ContentType=0" width="1" height="1">jafoste4https://community.element14.com/members/jafoste4MiniZed Technical Training Course on Xilinx 2021.1 Vitis and Vivado Tools now Releasedhttps://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/minized-ttc-on-vitis-and-vivado-2021-1-is-released2022-05-26T16:18:00Z2022-05-26T16:18:00ZIf you have been a long-time follower of Element 14 community, The Avnet Board community, and our FPGA forum then you know there has not been a new release of the MiniZed Technical Training Courses (TTC) since 2019. Well, the long awaited update has ...(<a href="https://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/minized-ttc-on-vitis-and-vivado-2021-1-is-released">read more</a>)<img src="https://community.element14.com/aggbug?PostID=23656&AppID=181&AppType=Weblog&ContentType=0" width="1" height="1">c_chilhttps://community.element14.com/members/camronchiltonYou better cool it with that Kria K26 SOM - Thermal Management Solution for K26https://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/you-better-cool-it-with-that-kria-k26-som2022-05-25T19:37:00Z2022-05-25T19:37:00ZAMD-Xilinx (gonna take me a while to get used to that name) released their own system on module (SOM) solution with the introduction of the Kria K26 family. These were originally released along with vision AI starter kit to help developers get starte...(<a href="https://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/you-better-cool-it-with-that-kria-k26-som">read more</a>)<img src="https://community.element14.com/aggbug?PostID=23649&AppID=181&AppType=Weblog&ContentType=0" width="1" height="1">ctammannhttps://community.element14.com/members/ctammannUpdate for Linaro Connect event for 96Boardshttps://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/update-for-linaro-connect-event-for-96boards2021-12-29T20:36:00Z2021-12-29T20:36:00ZThe Ultra96 boards are part of the Linaro 96Boards consortium. Ultra96 follows the 96Boards Consumer Edition Specification. As stated on the 96Boards About page, "96Boards is a range of hardware specifications created by Linaro to make the lates...(<a href="https://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/update-for-linaro-connect-event-for-96boards">read more</a>)<img src="https://community.element14.com/aggbug?PostID=22644&AppID=181&AppType=Weblog&ContentType=0" width="1" height="1">bhfletcherhttps://community.element14.com/members/bhfletcherUltraZed EG and EV cold start issue (-40C), fix and ECN infohttps://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/ultrazed-eg-and-ev-cold-start-issue--40c-fix-and-ecn-info2021-12-22T20:53:00Z2021-12-22T20:53:00ZI mentioned in a previous post that we were investigating a cold start issue on some Avnet products related to a spec change to the IRPS5401 PMIC from Infineon. To learn more about the issue please check out my previous blog - <a href="/technologies/power-management/b/blog/posts/irps5401-pmic-cold-start-spec-change">/technologies/power-man...</a>(<a href="https://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/ultrazed-eg-and-ev-cold-start-issue--40c-fix-and-ecn-info">read more</a>)<img src="https://community.element14.com/aggbug?PostID=22594&AppID=181&AppType=Weblog&ContentType=0" width="1" height="1">ctammannhttps://community.element14.com/members/ctammannSummer of FPGA: Using the Mikroe LCD Mini Click on the Ultra96-V2 - Part Twohttps://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/summer-of-fpga-using-the-mikroe-lcd-mini-click-on-the-ultra96-v2---part-two2021-09-20T20:29:16Z2021-09-20T20:29:16ZI want to build on the design created in <a class="jive-link-event" href="https://www.element14.com/community/events/5849/l/ultra96-v2-workshop-session-4-application-using-click-mezzanine-and-click-boards#comment-284367" style="font-style:inherit;font-family:inherit;color:#007fac;">Workshop 4 of the Summer of FPGA</a> series with the Ultra96-V2. That workshop created a design to use the UART click board and a PWM IP to drive the backlight on a LCD Mini Click board. The foundation...(<a href="https://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/summer-of-fpga-using-the-mikroe-lcd-mini-click-on-the-ultra96-v2---part-two">read more</a>)<img src="https://community.element14.com/aggbug?PostID=21930&AppID=181&AppType=Weblog&ContentType=0" width="1" height="1">Andrew Jhttps://community.element14.com/members/andrewjSummer of FPGA: Using the Mikroe LCD Click Mini on the Ultra96-V2 - Part Onehttps://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/summer-of-fpga-using-the-mikroe-lcd-click-mini-on-the-ultra96-v2---part-one2021-09-03T18:43:00Z2021-09-03T18:43:00ZI want to build on the design created in <a class="jive-link-event" href="https://www.element14.com/community/events/5849/l/ultra96-v2-workshop-session-4-application-using-click-mezzanine-and-click-boards#comment-284367">Workshop 4 of the Summer of FPGA</a> series with the Ultra96-V2. That workshop created a design to use the UART click board and a PWM IP to drive the backlight on a LCD Mini Click board. The foundation...(<a href="https://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/summer-of-fpga-using-the-mikroe-lcd-click-mini-on-the-ultra96-v2---part-one">read more</a>)<img src="https://community.element14.com/aggbug?PostID=21918&AppID=181&AppType=Weblog&ContentType=0" width="1" height="1">Andrew Jhttps://community.element14.com/members/andrewjUltra96-V2 Workshop Homework: Peripherals Testhttps://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/ultra96-v2-workshop-homework-peripherals-test2021-09-01T09:14:00Z2021-09-01T09:14:00ZDuring Ultra96-V2 Workshop: Session 3: Hello World on a Cortex-A53 and R5 Processor , one of the homework assignments was to create and run the Peripherals Test from the Example Templates. I also mentioned that you may run into an issue during the ru...(<a href="https://community.element14.com/products/devtools/avnetboardscommunity/b/blog/posts/ultra96-v2-workshop-homework-peripherals-test">read more</a>)<img src="https://community.element14.com/aggbug?PostID=24047&AppID=181&AppType=Weblog&ContentType=0" width="1" height="1">bhfletcherhttps://community.element14.com/members/bhfletcher