XRF8 Gen3 SOM

e14cstanton — Mon, 23 Dec 2024 15:42:59 GMT

Current Revision posted to Boards by e14cstanton on 12/23/2024 3:42:59 PM

Welcome to XRF8 Gen3 SOM

The XRF8 RFSoC Gen3 System-on-Module is designed for integration into deployed RF systems demanding small footprint, low power and real-time processing. The XRF8 features the Xilinx Zynq® UltraScale+™ RFSoC Gen 3 ZU47DR, with 8 RF-ADC, 8 RF-DAC channels and 6 GHz RF bandwidth.

Support Forum

Technical Specification

The Avnet XRF8™ RFSoC System-on-Module is designed for integration into deployed RF systems demanding small footprint, low power and real-time processing. The XRF8 features the AMD Xilinx Zynq® UltraScale+™ RFSoC Gen3 ZU47DR, with 8 RF-ADC, 8 RF-DAC channels and 6 GHz RF bandwidth. Modules can be ordered with the ZU48DR RFSoC to enable 8x soft-decision forward error correction (SD-FEC) units.

Combine the production-ready XRF8 module with the XRF8 Carrier Card and Avalon™ software suite to jump-start proof-of-concept and application development. Then deploy your system with the same XRF8 module used for proof-of-concept. Example code and tutorials demonstrate AMD Xilinx RFSoC multitile sync (multi-converter sync) and multi-board synchronized analog capture. Product Brief (Datasheet)

Click on the images to enlarge

SOM with Carrier Card

Carrier Card

Block Diagram

Target Applications

Phased Array Radar
5G Massive MIMO
Hybrid Beamforming
Signal Detection & Jamming
Medical Imaging
Multi-Channel RF Instrumentation

Kit Includes

XRF8 System-on-Module
Avalon™ software

Hardware Specification

Specification	Description
AMD Xilinx Zynq UltraScale+ Gen3 ZU47DR RFSoC	8x ADCs, 14-bit up to 5.0 GSPS 8x DACs, 14-bit up to 8.92 GSPS (10 GSPS available) Quad-core Arm® Cortex®-A53 processing subsystem 1 GbE, PCIe Gen1/2, SATA, USB2/3 UltraScale+ programmable logic
High-Speed Data Transfer	16x ultra-fast AMD Xilinx GTY serial transceivers Quad Mesh™ firmware combines AMD Xilinx Aurora protocol with GTY transceivers to stream data with four peers, facilitating tiling in high performance real-time systems
Memory	4GB DDR4 @ programmable Logic 4GB DDR4 @ processor Subsystem 32GB eMMC persistent storage 128MB QSPI boot storage
Clocks & Synchronization	Ultra-low jitter programmable sampling clocks External or onboard programmable TCXO reference clock Phase coherent synchronous sampling across all converters & multiple boards
System	4” x 5” footprint 5.5V to 16V input Temperature monitor Industrial temperature rated Air and conduction cooling options

Reference Designs

Block Diagram

XRF8 Gen3 SOM - Block Digram

Technical Documents

Product Brief

XRF8 Gen3 SOM Product Brief

XRF Carrier Card Product Brief

Quick Start Guide

Tags: xrf, xrf8rfsoc

XRF8 Gen3 SOM

e14-publisher — Wed, 06 Mar 2024 17:54:33 GMT

Revision 12 posted to Boards by e14-publisher on 3/6/2024 5:54:33 PM

Welcome to XRF8 Gen3 SOM

Support Forum

Technical Specification

Click on the images to enlarge

SOM with Carrier Card

Carrier Card

Block Diagram

Target Applications

Phased Array Radar
5G Massive MIMO
Hybrid Beamforming
Signal Detection & Jamming
Medical Imaging
Multi-Channel RF Instrumentation

Kit Includes

XRF8 System-on-Module
Avalon™ software

Hardware Specification

Specification	Description
AMD Xilinx Zynq UltraScale+ Gen3 ZU47DR RFSoC	8x ADCs, 14-bit up to 5.0 GSPS 8x DACs, 14-bit up to 8.92 GSPS (10 GSPS available) Quad-core Arm® Cortex®-A53 processing subsystem 1 GbE, PCIe Gen1/2, SATA, USB2/3 UltraScale+ programmable logic
High-Speed Data Transfer	16x ultra-fast AMD Xilinx GTY serial transceivers Quad Mesh™ firmware combines AMD Xilinx Aurora protocol with GTY transceivers to stream data with four peers, facilitating tiling in high performance real-time systems
Memory	4GB DDR4 @ programmable Logic 4GB DDR4 @ processor Subsystem 32GB eMMC persistent storage 128MB QSPI boot storage
Clocks & Synchronization	Ultra-low jitter programmable sampling clocks External or onboard programmable TCXO reference clock Phase coherent synchronous sampling across all converters & multiple boards
System	4” x 5” footprint 5.5V to 16V input Temperature monitor Industrial temperature rated Air and conduction cooling options

Reference Designs

Block Diagram

XRF8 Gen3 SOM - Block Digram

Technical Documents

Product Brief

XRF8 Gen3 SOM Product Brief

XRF Carrier Card Product Brief

Quick Start Guide

Tags: xrf, xrf8rfsoc

XRF8 Gen3 SOM

e14-publisher — Fri, 03 Feb 2023 19:12:01 GMT

Revision 11 posted to Boards by e14-publisher on 2/3/2023 7:12:01 PM

Welcome to XRF8 Gen3 SOM

Support Forum

Technical Specification

Click on the images to enlarge

SOM with Carrier Card

Carrier Card

Block Diagram

Target Applications

Phased Array Radar
5G Massive MIMO
Hybrid Beamforming
Signal Detection & Jamming
Medical Imaging
Multi-Channel RF Instrumentation

Kit Includes

XRF8 System-on-Module
Avalon™ software

Hardware Specification

Specification	Description
AMD Xilinx Zynq UltraScale+ Gen3 ZU47DR RFSoC	8x ADCs, 14-bit up to 5.0 GSPS 8x DACs, 14-bit up to 8.92 GSPS (10 GSPS available) Quad-core Arm® Cortex®-A53 processing subsystem 1 GbE, PCIe Gen1/2, SATA, USB2/3 UltraScale+ programmable logic
High-Speed Data Transfer	16x ultra-fast AMD Xilinx GTY serial transceivers Quad Mesh™ firmware combines AMD Xilinx Aurora protocol with GTY transceivers to stream data with four peers, facilitating tiling in high performance real-time systems
Memory	4GB DDR4 @ programmable Logic 4GB DDR4 @ processor Subsystem 32GB eMMC persistent storage 128MB QSPI boot storage
Clocks & Synchronization	Ultra-low jitter programmable sampling clocks External or onboard programmable TCXO reference clock Phase coherent synchronous sampling across all converters & multiple boards
System	4” x 5” footprint 5.5V to 16V input Temperature monitor Industrial temperature rated Air and conduction cooling options

Reference Designs

Block Diagram

XRF8 Gen3 SOM - Block Digram

Technical Documents

Product Brief

XRF8 Gen3 SOM Product Brief

XRF Carrier Card Product Brief

Quick Start Guide

Tags: xrf, xrf8rfsoc

XRF8 Gen3 SOM

e14-publisher — Thu, 22 Sep 2022 16:07:39 GMT

Revision 10 posted to Boards by e14-publisher on 9/22/2022 4:07:39 PM

Welcome to XRF8 Gen3 SOM

Support Forum

Technical Specification

Click on the images to enlarge

SOM with Carrier Card

Carrier Card

Block Diagram

Target Applications

Phased Array Radar
5G Massive MIMO
Hybrid Beamforming
Signal Detection & Jamming
Medical Imaging
Multi-Channel RF Instrumentation

Kit Includes

XRF8 System-on-Module
Avalon™ software

Hardware Specification

Specification	Description
AMD Xilinx Zynq UltraScale+ Gen3 ZU47DR RFSoC	8x ADCs, 14-bit up to 5.0 GSPS 8x DACs, 14-bit up to 8.92 GSPS (10 GSPS available) Quad-core Arm® Cortex®-A53 processing subsystem 1 GbE, PCIe Gen1/2, SATA, USB2/3 UltraScale+ programmable logic
High-Speed Data Transfer	16x ultra-fast AMD Xilinx GTY serial transceivers Quad Mesh™ firmware combines AMD Xilinx Aurora protocol with GTY transceivers to stream data with four peers, facilitating tiling in high performance real-time systems
Memory	4GB DDR4 @ programmable Logic 4GB DDR4 @ processor Subsystem 32GB eMMC persistent storage 128MB QSPI boot storage
Clocks & Synchronization	Ultra-low jitter programmable sampling clocks External or onboard programmable TCXO reference clock Phase coherent synchronous sampling across all converters & multiple boards
System	4” x 5” footprint 5.5V to 16V input Temperature monitor Industrial temperature rated Air and conduction cooling options

Reference Designs

Block Diagram

XRF8 Gen3 SOM - Block Digram

Technical Documents

Product Brief

XRF8 Gen3 SOM Product Brief

XRF Carrier Card Product Brief

Avnet Boards Xilinx Solutions Guide

Quick Start Guide

Tags: xrf, xrf8rfsoc

XRF8 Gen3 SOM

e14-publisher — Thu, 22 Sep 2022 16:03:37 GMT

Revision 9 posted to Boards by e14-publisher on 9/22/2022 4:03:37 PM

Welcome to XRF8 Gen3 SOM

Support Forum

Technical Specification

Click on the images to enlarge

SOM with Carrier Card

Carrier Card

Block Diagram

Target Applications

Phased Array Radar
5G Massive MIMO
Hybrid Beamforming
Signal Detection & Jamming
Medical Imaging
Multi-Channel RF Instrumentation

Kit Includes

XRF8 System-on-Module
Avalon™ software

Hardware Specification

Specification	Description
Xilinx Zynq UltraScale+ Gen3 ZU47DR RFSoC	8x ADCs, 14-bit up to 5.0 GSPS 8x DACs, 14-bit up to 8.92 GSPS (10 GSPS available) Quad-core Arm® Cortex®-A53 processing subsystem 1 GbE, PCIe Gen1/2, SATA, USB2/3 UltraScale+ programmable logic
High-Speed Data Transfer	8x 28Gbps serial links for supporting 10/25/100 GbE and Xilinx Aurora Quad Mesh™ firmware interface streams data with four peers concurrently, facilitating tiling in high performance real-time systems
Memory	4GB DDR4 @ Programmable Logic 4GB DDR4 @ Processor Subsystem 32GB eMMC persistent storage 128MB QSPI boot storage
Clocks & Synchronization	Ultra-low jitter programmable sampling clocks External or onboard programmable TCXO reference clock Phase coherent synchronous sampling across all converters & multiple boards
System	4” x 5” footprint 5.5V to 16V input Temperature monitor Industrial temperature rated Air and conduction cooling options

Reference Designs

Block Diagram

XRF8 Gen3 SOM - Block Digram

Technical Documents

Product Brief

XRF8 Gen3 SOM Product Brief

XRF Carrier Card Product Brief

Avnet Boards Xilinx Solutions Guide

Quick Start Guide

Tags: xrf, xrf8rfsoc

XRF8 Gen3 SOM

e14-publisher — Thu, 22 Sep 2022 16:00:44 GMT

Revision 8 posted to Boards by e14-publisher on 9/22/2022 4:00:44 PM

Welcome to XRF8 Gen3 SOM

Support Forum

Technical Specification

Click on the images to enlarge

SOM with Carrier Card

Carrier Card

Block Diagram

Target Applications

Phased Array Radar
5G Massive MIMO
Hybrid Beamforming
Signal Detection & Jamming
Medical Imaging
Multi-Channel RF Instrumentation

Kit Includes

XRF8 System-on-Module
Software

Hardware Specification

Specification	Description
Xilinx Zynq UltraScale+ Gen3 ZU47DR RFSoC	8x ADCs, 14-bit up to 5.0 GSPS 8x DACs, 14-bit up to 8.92 GSPS (10 GSPS available) Quad-core Arm® Cortex®-A53 processing subsystem 1 GbE, PCIe Gen1/2, SATA, USB2/3 UltraScale+ programmable logic
High-Speed Data Transfer	8x 28Gbps serial links for supporting 10/25/100 GbE and Xilinx Aurora Quad Mesh™ firmware interface streams data with four peers concurrently, facilitating tiling in high performance real-time systems
Memory	4GB DDR4 @ Programmable Logic 4GB DDR4 @ Processor Subsystem 32GB eMMC persistent storage 128MB QSPI boot storage
Clocks & Synchronization	Ultra-low jitter programmable sampling clocks External or onboard programmable TCXO reference clock Phase coherent synchronous sampling across all converters & multiple boards
System	4” x 5” footprint 5.5V to 16V input Temperature monitor Industrial temperature rated Air and conduction cooling options

Reference Designs

Block Diagram

XRF8 Gen3 SOM - Block Digram

Technical Documents

Product Brief

XRF8 Gen3 SOM Product Brief

XRF Carrier Card Product Brief

Avnet Boards Xilinx Solutions Guide

Quick Start Guide

Tags: xrf, xrf8rfsoc

XRF8 Gen3 SOM

e14-publisher — Thu, 22 Sep 2022 14:53:31 GMT

Revision 7 posted to Boards by e14-publisher on 9/22/2022 2:53:31 PM

Welcome to XRF8 Gen3 SOM

Support Forum

Technical Specification

The Avnet XRF8™ RFSoC System-on-Module is designed for integration into deployed RF systems demanding small footprint, low power and real-time processing. The XRF8 features the Xilinx Zynq® UltraScale+™ RFSoC Gen 3 ZU47DR, with 8 RF-ADC, 8 RF-DAC channels and 6 GHz RF bandwidth. Modules can be ordered with the ZU48DR RFSoC to enable 8x soft-decision forward error correction (SD-FEC) units.

Combine the production-ready XRF8 module with the XRF8 Carrier Card and Avalon™ software suite to jump-start proof-of-concept and application development. Then deploy your system with the same XRF8 module used for proof-of-concept. Example code and tutorials demonstrate Xilinx RFSoC multitile sync (multi-converter sync) and multi-board synchronized analog capture. Product Brief (Datasheet)

Click on the images to enlarge

SOM with Carrier Card

Carrier Card

Block Diagram

Target Applications

Phased Array Radar
5G Massive MIMO
Hybrid Beamforming
Signal Detection & Jamming
Medical Imaging
Multi-Channel RF Instrumentation

Kit Includes

XRF8 System-on-Module
Software

Hardware Specification

Specification	Description
Xilinx Zynq UltraScale+ Gen3 ZU47DR RFSoC	8x ADCs, 14-bit up to 5.0 GSPS 8x DACs, 14-bit up to 8.92 GSPS (10 GSPS available) Quad-core Arm® Cortex®-A53 processing subsystem 1 GbE, PCIe Gen1/2, SATA, USB2/3 UltraScale+ programmable logic
High-Speed Data Transfer	8x 28Gbps serial links for supporting 10/25/100 GbE and Xilinx Aurora Quad Mesh™ firmware interface streams data with four peers concurrently, facilitating tiling in high performance real-time systems
Memory	4GB DDR4 @ Programmable Logic 4GB DDR4 @ Processor Subsystem 32GB eMMC persistent storage 128MB QSPI boot storage
Clocks & Synchronization	Ultra-low jitter programmable sampling clocks External or onboard programmable TCXO reference clock Phase coherent synchronous sampling across all converters & multiple boards
System	4” x 5” footprint 5.5V to 16V input Temperature monitor Industrial temperature rated Air and conduction cooling options

Reference Designs

Block Diagram

XRF8 Gen3 SOM - Block Digram

Technical Documents

Product Brief

XRF8 Gen3 SOM Product Brief

XRF Carrier Card Product Brief

Avnet Boards Xilinx Solutions Guide

Quick Start Guide

Tags: xrf, xrf8rfsoc

XRF8 Gen3 SOM

e14-publisher — Fri, 27 May 2022 20:09:37 GMT

Revision 6 posted to Boards by e14-publisher on 5/27/2022 8:09:37 PM

Welcome to XRF8 Gen3 SOM

Support Forum

Technical Specification

The Avnet XRF8™ RFSoC System-on-Module is designed for integration into deployed RF systems demanding small footprint, low power and real-time processing. The XRF8 features the Xilinx Zynq® UltraScale+™ RFSoC Gen 3 ZU47DR, with 8 RF-ADC, 8 RF-DAC channels and 6 GHz RF bandwidth. Modules can be ordered with the ZU48DR RFSoC to enable 8x soft-decision forward error correction (SD-FEC) units.

Combine the production-ready XRF8 module with the XRF8 Carrier Card and Avalon™ software suite to jump-start proof-of-concept and application development. Then deploy your system with the same XRF8 module used for proof-of-concept. Example code and tutorials demonstrate Xilinx RFSoC multitile sync (multi-converter sync) and multi-board synchronized analog capture. Product Brief (Datasheet)

Click on the images to enlarge

SOM with Carrier Card

Carrier Card

Block Diagram

Target Applications

Phased Array Radar
5G Massive MIMO
Hybrid Beamforming
Signal Detection & Jamming
Medical Imaging
Multi-Channel RF Instrumentation

Kit Includes

XRF8 System-on-Module
Software

Hardware Specification

Specification	Description
Xilinx Zynq UltraScale+ Gen3 ZU47DR RFSoC	8x ADCs, 14-bit up to 5.0 GSPS 8x DACs, 14-bit up to 8.92 GSPS (10 GSPS available) Quad-core Arm® Cortex®-A53 processing subsystem 1 GbE, PCIe Gen1/2, SATA, USB2/3 UltraScale+ programmable logic
High-Speed Data Transfer	8x 28Gbps serial links for supporting 10/25/100 GbE and Xilinx Aurora Quad Mesh™ firmware interface streams data with four peers concurrently, facilitating tiling in high performance real-time systems
Memory	4GB DDR4 @ Programmable Logic 4GB DDR4 @ Processor Subsystem 32GB eMMC persistent storage 128MB QSPI boot storage
Clocks & Synchronization	Ultra-low jitter programmable sampling clocks External or onboard programmable TCXO reference clock Phase coherent synchronous sampling across all converters & multiple boards
System	4” x 5” footprint 5.5V to 16V input Temperature monitor Industrial temperature rated Air and conduction cooling options

Reference Designs

Block Diagram

XRF8 Gen3 SOM - Block Digram

Technical Documents

Product Brief

XRF8 Gen3 SOM Product Brief

Avnet Boards Xilinx Solutions Guide

Quick Start Guide

Tags: xrf, xrf8rfsoc

XRF8 Gen3 SOM

e14-publisher — Thu, 16 Dec 2021 03:30:01 GMT

Revision 5 posted to Boards by e14-publisher on 12/16/2021 3:30:01 AM

Welcome to XRF8 Gen3 SOM

Support Forum

Technical Specification

The Avnet XRF8™ RFSoC System-on-Module is designed for integration into deployed RF systems demanding small footprint, low power and real-time processing. The XRF8 features the Xilinx Zynq® UltraScale+™ RFSoC Gen 3 ZU47DR, with 8 RF-ADC, 8 RF-DAC channels and 6 GHz RF bandwidth. Modules can be ordered with the ZU48DR RFSoC to enable 8x soft-decision forward error correction (SD-FEC) units.

Combine the production-ready XRF8 module with the XRF8 Carrier Card and Avalon™ software suite to jump-start proof-of-concept and application development. Then deploy your system with the same XRF8 module used for proof-of-concept. Example code and tutorials demonstrate Xilinx RFSoC multitile sync (multi-converter sync) and multi-board synchronized analog capture. Product Brief (Datasheet)

Click on the images to enlarge

SOM with Carrier Card

Carrier Card

Block Diagram

Target Applications

Phased Array Radar
5G Massive MIMO
Hybrid Beamforming
Signal Detection & Jamming
Medical Imaging
Multi-Channel RF Instrumentation

Kit Includes

XRF8 System-on-Module
Software

Hardware Specification

Specification	Description
Xilinx Zynq UltraScale+ Gen3 ZU47DR RFSoC	8x ADCs, 14-bit up to 5.0 GSPS 8x DACs, 14-bit up to 8.92 GSPS (10 GSPS available) Quad-core Arm® Cortex®-A53 processing subsystem 1 GbE, PCIe Gen1/2, SATA, USB2/3 UltraScale+ programmable logic
High-Speed Data Transfer	8x 28Gbps serial links for supporting 10/25/100 GbE and Xilinx Aurora Quad Mesh™ firmware interface streams data with four peers concurrently, facilitating tiling in high performance real-time systems
Memory	4GB DDR4 @ Programmable Logic 4GB DDR4 @ Processor Subsystem 32GB eMMC persistent storage 128MB QSPI boot storage
Clocks & Synchronization	Ultra-low jitter programmable sampling clocks External or onboard programmable TCXO reference clock Phase coherent synchronous sampling across all converters & multiple boards
System	4” x 5” footprint 5.5V to 16V input Temperature monitor Industrial temperature rated Air and conduction cooling options

Reference Designs

Block Diagram

XRF8 Gen3 SOM - Block Digram

Technical Documents

Product Brief

XRF8 Gen3 SOM Product Brief

Avnet Boards Xilinx Solutions Guide

Quick Start Guide

Tags: xrf, xrf8rfsoc

XRF8 Gen3 SOM

e14-publisher — Mon, 08 Nov 2021 15:31:03 GMT

Revision 4 posted to Boards by e14-publisher on 11/8/2021 3:31:03 PM

Welcome to XRF8 Gen3 SOM

Support Forum

Technical Specification

The Avnet XRF8™ RFSoC System-on-Module is designed for integration into deployed RF systems demanding small footprint, low power and real-time processing. The XRF8 features the Xilinx Zynq® UltraScale+™ RFSoC Gen 3 ZU47DR, with 8 RF-ADC, 8 RF-DAC channels and 6 GHz RF bandwidth. Modules can be ordered with the ZU48DR RFSoC to enable 8x soft-decision forward error correction (SD-FEC) units.

Combine the production-ready XRF8 module with the XRF8 Carrier Card and Avalon™ software suite to jump-start proof-of-concept and application development. Then deploy your system with the same XRF8 module used for proof-of-concept. Example code and tutorials demonstrate Xilinx RFSoC multitile sync (multi-converter sync) and multi-board synchronized analog capture. Product Brief (Datasheet)

Click on the images to enlarge

SOM with Carrier Card

Carrier Card

Block Diagram

Target Applications

Phased Array Radar
5G Massive MIMO
Hybrid Beamforming
Signal Detection & Jamming
Medical Imaging
Multi-Channel RF Instrumentation

Kit Includes

XRF8 System-on-Module
Software

Hardware Specification

Specification	Description
Xilinx Zynq UltraScale+ Gen3 ZU47DR RFSoC	8x ADCs, 14-bit up to 5.0 GSPS 8x DACs, 14-bit up to 8.92 GSPS (10 GSPS available) Quad-core Arm® Cortex®-A53 processing subsystem 1 GbE, PCIe Gen1/2, SATA, USB2/3 UltraScale+ programmable logic
High-Speed Data Transfer	8x 28Gbps serial links for supporting 10/25/100 GbE and Xilinx Aurora Quad Mesh™ firmware interface streams data with four peers concurrently, facilitating tiling in high performance real-time systems
Memory	4GB DDR4 @ Programmable Logic 4GB DDR4 @ Processor Subsystem 32GB eMMC persistent storage 128MB QSPI boot storage
Clocks & Synchronization	Ultra-low jitter programmable sampling clocks External or onboard programmable TCXO reference clock Phase coherent synchronous sampling across all converters & multiple boards
System	4” x 5” footprint 5.5V to 16V input Temperature monitor Industrial temperature rated Air and conduction cooling options

Reference Designs

Block Diagram

XRF8 Gen3 SOM - Block Digram

Technical Documents

Product Brief

XRF8 Gen3 SOM Product Brief

Avnet Boards Xilinx Solutions Guide

Quick Start Guide

Tags: xrf, xrf8rfsoc

XRF8 Gen3 SOM

e14-publisher — Fri, 29 Oct 2021 19:53:05 GMT

Revision 3 posted to Boards by e14-publisher on 10/29/2021 7:53:05 PM

Welcome to XRF8 Gen3 SOM

Support Forum

Technical Specification

The Avnet XRF8™ RFSoC System-on-Module is designed for integration into deployed RF systems demanding small footprint, low power and real-time processing. The XRF8 features the Xilinx Zynq® UltraScale+™ RFSoC Gen 3 ZU47DR, with 8 RF-ADC, 8 RF-DAC channels and 6 GHz RF bandwidth. Modules can be ordered with the ZU48DR RFSoC to enable 8x soft-decision forward error correction (SD-FEC) units.

Combine the production-ready XRF8 module with the XRF8 Carrier Card and Avalon™ software suite to jump-start proof-of-concept and application development. Then deploy your system with the same XRF8 module used for proof-of-concept. Example code and tutorials demonstrate Xilinx RFSoC multitile sync (multi-converter sync) and multi-board synchronized analog capture. Product Brief (Datasheet)

Click on the images to enlarge

SOM with Carrier Card

Carrier Card

Block Diagram

Target Applications

Phased Array Radar
5G Massive MIMO
Hybrid Beamforming
Signal Detection & Jamming
Medical Imaging
Multi-Channel RF Instrumentation

Kit Includes

XRF8 System-on-Module
Software

Hardware Specification

Specification	Description
Xilinx Zynq UltraScale+ Gen3 ZU47DR RFSoC	8x ADCs, 14-bit up to 5.0 GSPS 8x DACs, 14-bit up to 8.92 GSPS (10 GSPS available) Quad-core Arm® Cortex®-A53 processing subsystem 1 GbE, PCIe Gen1/2, SATA, USB2/3 UltraScale+ programmable logic
High-Speed Data Transfer	8x 28Gbps serial links for supporting 10/25/100 GbE and Xilinx Aurora Quad Mesh™ firmware interface streams data with four peers concurrently, facilitating tiling in high performance real-time systems
Memory	4GB DDR4 @ Programmable Logic 4GB DDR4 @ Processor Subsystem 32GB eMMC persistent storage 128MB QSPI boot storage
Clocks & Synchronization	Ultra-low jitter programmable sampling clocks External or onboard programmable TCXO reference clock Phase coherent synchronous sampling across all converters & multiple boards
System	4” x 5” footprint 5.5V to 16V input Temperature monitor Industrial temperature rated Air and conduction cooling options

Reference Designs

Block Diagram

XRF8 Gen3 SOM - Block Digram

Technical Documents

Product Brief

XRF8 Gen3 SOM Product Brief

Avnet Boards Xilinx Solutions Guide

Quick Start Guide

Tags: xrf, xrf8rfsoc

XRF8 Gen3 SOM

e14-publisher — Wed, 27 Oct 2021 14:14:45 GMT

Revision 2 posted to Boards by e14-publisher on 10/27/2021 2:14:45 PM

Welcome to XRF8 Gen3 SOM

Support Forum

Technical Specification

The Avnet XRF8™ RFSoC System-on-Module is designed for integration into deployed RF systems demanding small footprint, low power and real-time processing. The XRF8 features the Xilinx Zynq® UltraScale+™ RFSoC Gen 3 ZU47DR, with 8 RF-ADC, 8 RF-DAC channels and 6 GHz RF bandwidth. Modules can be ordered with the ZU48DR RFSoC to enable 8x soft-decision forward error correction (SD-FEC) units.

Combine the production-ready XRF8 module with the XRF8 Carrier Card and Avalon™ software suite to jump-start proof-of-concept and application development. Then deploy your system with the same XRF8 module used for proof-of-concept. Example code and tutorials demonstrate Xilinx RFSoC multitile sync (multi-converter sync) and multi-board synchronized analog capture. Product Brief (Datasheet)

Click on the images to enlarge

SOM with Carrier Card

Carrier Card

Block Diagram

Target Applications

Phased Array Radar
5G Massive MIMO
Hybrid Beamforming
Signal Detection & Jamming
Medical Imaging
Multi-Channel RF Instrumentation

Kit Includes

XRF8 System-on-Module
Software

Hardware Specification

Specification	Description
Xilinx Zynq UltraScale+ Gen3 ZU47DR RFSoC	8x ADCs, 14-bit up to 5.0 GSPS 8x DACs, 14-bit up to 8.92 GSPS (10 GSPS available) Quad-core Arm® Cortex®-A53 processing subsystem 1 GbE, PCIe Gen1/2, SATA, USB2/3 UltraScale+ programmable logic
High-Speed Data Transfer	8x 28Gbps serial links for supporting 10/25/100 GbE and Xilinx Aurora Quad Mesh™ firmware interface streams data with four peers concurrently, facilitating tiling in high performance real-time systems
Memory	4GB DDR4 @ Programmable Logic 4GB DDR4 @ Processor Subsystem 32GB eMMC persistent storage 128MB QSPI boot storage
Clocks & Synchronization	Ultra-low jitter programmable sampling clocks External or onboard programmable TCXO reference clock Phase coherent synchronous sampling across all converters & multiple boards
System	4” x 5” footprint 5.5V to 16V input Temperature monitor Industrial temperature rated Air and conduction cooling options

Reference Designs

Block Diagram

XRF8 Gen3 SOM - Block Digram

Technical Documents

Product Brief

XRF8 Gen3 SOM Product Brief

Avnet Boards Xilinx Solutions Guide

Quick Start Guide

Tags: xrf, xrf8rfsoc

XRF8 Gen3 SOM

e14-publisher — Wed, 20 Oct 2021 19:54:49 GMT

Revision 1 posted to Boards by e14-publisher on 10/20/2021 7:54:49 PM

Welcome to XRF8 Gen3 SOM

Support Forum

Technical Specification

The Avnet XRF8™ RFSoC System-on-Module is designed for integration into deployed RF systems demanding small footprint, low power and real-time processing. The XRF8 features the Xilinx Zynq® UltraScale+™ RFSoC Gen 3 ZU47DR, with 8 RF-ADC, 8 RF-DAC channels and 6 GHz RF bandwidth. Modules can be ordered with the ZU48DR RFSoC to enable 8x soft-decision forward error correction (SD-FEC) units.

Combine the production-ready XRF8 module with the XRF8 Carrier Card and Avalon™ software suite to jump-start proof-of-concept and application development. Then deploy your system with the same XRF8 module used for proof-of-concept. Example code and tutorials demonstrate Xilinx RFSoC multitile sync (multi-converter sync) and multi-board synchronized analog capture. Product Brief (Datasheet)

Click on the images to enlarge

SOM with Carrier Card

Carrier Card

Block Diagram

Target Applications

Phased Array Radar
5G Massive MIMO
Hybrid Beamforming
Signal Detection & Jamming
Medical Imaging
Multi-Channel RF Instrumentation

Kit Includes

XRF8 System-on-Module
Software

Hardware Specification

Specification	Description
Xilinx Zynq UltraScale+ Gen3 ZU47DR RFSoC	8x ADCs, 14-bit up to 5.0 GSPS 8x DACs, 14-bit up to 8.92 GSPS (10 GSPS available) Quad-core Arm® Cortex®-A53 processing subsystem 1 GbE, PCIe Gen1/2, SATA, USB2/3 UltraScale+ programmable logic
High-Speed Data Transfer	8x 28Gbps serial links for supporting 10/25/100 GbE and Xilinx Aurora Quad Mesh™ firmware interface streams data with four peers concurrently, facilitating tiling in high performance real-time systems
Memory	4GB DDR4 @ Programmable Logic 4GB DDR4 @ Processor Subsystem 32GB eMMC persistent storage 128MB QSPI boot storage
Clocks & Synchronization	Ultra-low jitter programmable sampling clocks External or onboard programmable TCXO reference clock Phase coherent synchronous sampling across all converters & multiple boards
System	4” x 5” footprint 5.5V to 16V input Temperature monitor Industrial temperature rated Air and conduction cooling options

Reference Designs

Block Diagram

XRF8 Gen3 SOM - Block Digram

Technical Documents

Product Brief

XRF8 Gen3 SOM Product Brief

Avnet Boards Xilinx Solutions Guide

Quick Start Guide

Tags: xrf, xrf8rfsoc