Renesas Air Quality HATs

e14-publisher — Thu, 29 Feb 2024 16:03:50 GMT

Current Revision posted to Boards by e14-publisher on 2/29/2024 4:03:50 PM

Welcome to Renesas Air Quality HATs

Avnet's Renesas ZMOD4410 and ZMOD4510 Air Quality HATs for Raspberry Pi are evaluation, development and quick-prototyping tools intended for professionals developing a wide variety of Air Quality monitoring capabilities.

To purchase the Indoor Air Quality HAT Click Here: price reduced ≈45 percent!

To purchase the Outdoor Air Quality HAT Click Here: price reduced ≈45 percent!

Support Forum

Technical Specification

ZMOD4410 | ZMOD4510

Avnet's Renesas ZMOD4410 Indoor Air Quality HAT

Avnet's Renesas ZMOD4410 Indoor Air Quality HAT for Raspberry Pi is intended for professionals developing a wide variety of wall-powered and battery-powered products with indoor air quality monitoring capability. The HAT features an on-board calibrated ZMOD4410 sensor that measures the concentrations of Total Volatile Organic Compounds (TVOC) and can estimate carbon dioxide (eCO2) levels. These are important indicators for monitoring indoor air quality.

In addition to the ZMOD4410 sensor, the HAT incorporates a Renesas HS3001 Precision Relative Humidity and Temperature Sensor, along with software-controlled status LEDs.

In certain applications, it may be desirable to shift the ZMOD4410 sensing element’s chemical selectivity and sensitivity, or to model its operation at supply voltages other than 3.3V. The HAT facilitates this with a user-adjustable power supply; a jumper selects the default fixed 3.3V supply or one which can be set from 1.75V to 3.9V. The HAT also provides connection points to measure the ZMOD4410 current consumption. This may be useful when integrating the sensor and its software into an extended-life battery-powered product.

Click on the images to enlarge

Top View

Block Diagram

Target Applications

Smart home appliances
Smart thermostats
Smart speakers
Smart fans
Smoke alarms
Vacuum cleaners
Garage openers
Security systems
HVAC
Air purifiers
Building automation

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT for Raspberry Pi is intended for professionals developing applications for monitoring and reporting Outdoor Air Quality (OAQ) based on gases present.

The ZMOD4510 includes non-selective measurement of nitrogen dioxide (NO2) and ozone (O3), as well as selective ozone measurement using ultra-low power. It supports international standards for air quality (such as the US EPA), is excellent for low-voltage and low power battery applications (ultra-low power consumption down to 0.2 mW). Water and dustproof versions are available, and can be customized for mobile, industrial land consumer applications.

Target Applications

Air monitoring for nitrogen dioxide and ozone
Detect unhealthy conditions in outdoor air
Personal air quality monitors
Smart City instrumentation
Automation based on AQI (HCAV systems, building air purification systems)

Air Quality HATS

Benefits

Convenient Raspberry Pi HAT form factor for evaluation, development and quick prototyping of products that monitor air quality
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspberry Pi OS test / validation application
Licensed downloadable compiled code offered by Renesas.

Software Downloads

To validate the Renesas ZMOD HAT’s operation with a Raspberry Pi, Avnet provides a pre-compiled test application built with algorithm libraries which runs under the Raspberry Pi operating system (formerly Raspbian).
- Download the “out of the box” test/validation application.
Algorithm libraries developed by Renesas are required to operate the sensors. These algorithm libraries are not included with the HAT but are available directly from Renesas subject to the terms and conditions of Renesas’ Software License Agreement. An application for the Software License Agreement, along with the procedure to download the algorithms and related confidential data, is available here.
- Download Renesas’ Software License Agreement and procedure to download the ZMOD algorithm libraries and related confidential data.

Reference Designs

Software Downloads

ZMOD4410 - Software License Agreement and ZMOD algorithm libraries (html)

Technical Documents

General

ZMOD4410 Hat Block Diagram

Product Brief/Fact Sheet

ZMOD4410 Product Brief

ZMOD4510 Product Brief

Avnet Boards MPU/MCU Solutions Guide

Quick Start Guide

6002-QSC-AES-RHSEN-ZMOD44-G-v2

Schematics

ZMOD4410 Hat Schematic

Tags: iaq, zmod4510, covid, indoor air quality, cv19, raspberry pi, renesas, indoor_air_quality, tvoc, ECO2, hat, zmod4410, zmod, cv-19

Renesas Air Quality HATs

e14-publisher — Thu, 29 Feb 2024 15:59:51 GMT

Revision 22 posted to Boards by e14-publisher on 2/29/2024 3:59:51 PM

Welcome to Renesas Air Quality HATs

To purchase the Indoor Air Quality HAT Click Here: price reduced ≈45 percent!

To purchase the Outdoor Air Quality HAT Click Here: price reduced ≈45 percent!

Support Forum

Technical Specification

ZMOD4410 | ZMOD4510

Avnet's Renesas ZMOD4410 Indoor Air Quality HAT

In addition to the ZMOD4410 sensor, the HAT incorporates a Renesas HS3001 Precision Relative Humidity and Temperature Sensor, along with software-controlled status LEDs.

Click on the images to enlarge

Top View

Block Diagram

Target Applications

Smart home appliances
Smart thermostats
Smart speakers
Smart fans
Smoke alarms
Vacuum cleaners
Garage openers
Security systems
HVAC
Air purifiers
Building automation

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT for Raspberry Pi is intended for professionals developing applications for monitoring and reporting Outdoor Air Quality (OAQ) based on gases present.

Target Applications

Air monitoring for nitrogen dioxide and ozone
Detect unhealthy conditions in outdoor air
Personal air quality monitors
Smart City instrumentation
Automation based on AQI (HCAV systems, building air purification systems)

Air Quality HATS

Benefits

Convenient Raspberry Pi HAT form factor for evaluation, development and quick prototyping of products that monitor air quality
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspberry Pi OS test / validation application
Licensed downloadable compiled code offered by Renesas.

Software Downloads

To validate the Renesas ZMOD HAT’s operation with a Raspberry Pi, Avnet provides a pre-compiled test application built with algorithm libraries which runs under the Raspberry Pi operating system (formerly Raspbian).
- Download the “out of the box” test/validation application.
Algorithm libraries developed by Renesas are required to operate the sensors. These algorithm libraries are not included with the HAT but are available directly from Renesas subject to the terms and conditions of Renesas’ Software License Agreement. An application for the Software License Agreement, along with the procedure to download the algorithms and related confidential data, is available here.
- Download Renesas’ Software License Agreement and procedure to download the ZMOD algorithm libraries and related confidential data.

Reference Designs

Software Downloads

ZMOD4410 - Software License Agreement and ZMOD algorithm libraries (html)

Technical Documents

General

ZMOD4410 Hat Block Diagram

Product Brief/Fact Sheet

ZMOD4410 Product Brief

ZMOD4510 Product Brief

Avnet Boards MPU/MCU Solutions Guide

Quick Start Guide

6002-QSC-AES-RHSEN-ZMOD44-G-v2

Schematics

ZMOD4410 Hat Schematic

Tags: iaq, zmod4510, covid, indoor air quality, cv19, raspberry pi, renesas, indoor_air_quality, tvoc, ECO2, hat, zmod4410, zmod, cv-19

Renesas Air Quality HATs

e14-publisher — Thu, 29 Feb 2024 15:55:30 GMT

Revision 21 posted to Boards by e14-publisher on 2/29/2024 3:55:30 PM

Welcome to Renesas Air Quality HATs

To purchase the Indoor Air Quality HAT Click Here: price reduced ≈45 percent!

To purchase the Outdoor Air Quality HAT Click Here: price reduced ≈45 percent!

Support Forum

Technical Specification

ZMOD4410 | ZMOD4510

Avnet's Renesas ZMOD4410 Indoor Air Quality HAT

In addition to the ZMOD4410 sensor, the HAT incorporates a Renesas HS3001 Precision Relative Humidity and Temperature Sensor, along with software-controlled status LEDs.

Click on the images to enlarge

Top View

Block Diagram

Target Applications

Smart home appliances
Smart thermostats
Smart speakers
Smart fans
Smoke alarms
Vacuum cleaners
Garage openers
Security systems
HVAC
Air purifiers
Building automation

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT for Raspberry Pi is intended for professionals developing applications for monitoring and reporting Outdoor Air Quality (OAQ) based on gases present.

Target Applications

Air monitoring for nitrogen dioxide and ozone
Detect unhealthy conditions in outdoor air
Personal air quality monitors
Smart City instrumentation
Automation based on AQI (HCAV systems, building air purification systems)

Air Quality HATS

Benefits

Convenient Raspberry Pi HAT form factor for evaluation, development and quick prototyping of products that monitor air quality
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspberry Pi OS test / validation application
Licensed downloadable compiled code offered by Renesas.

Software Downloads

To validate the Renesas ZMOD HAT’s operation with a Raspberry Pi, Avnet provides a pre-compiled test application built with algorithm libraries which runs under the Raspberry Pi operating system (formerly Raspbian).
- Download the “out of the box” test/validation application.
Algorithm libraries developed by Renesas are required to operate the sensors. These algorithm libraries are not included with the HAT but are available directly from Renesas subject to the terms and conditions of Renesas’ Software License Agreement. An application for the Software License Agreement, along with the procedure to download the algorithms and related confidential data, is available here.
- Download Renesas’ Software License Agreement and procedure to download the ZMOD algorithm libraries and related confidential data.

Reference Designs

Software Downloads

ZMOD4410 - Software License Agreement and ZMOD algorithm libraries (html)

Technical Documents

General

ZMOD4410 Hat Block Diagram

Product Brief/Fact Sheet

ZMOD4410 Product Brief

ZMOD4510 Product Brief

Avnet Boards MPU/MCU Solutions Guide

Quick Start Guide

6002-QSC-AES-RHSEN-ZMOD44-G-v2

Schematics

ZMOD4410 Hat Schematic

Tags: iaq, zmod4510, covid, indoor air quality, cv19, raspberry pi, renesas, indoor_air_quality, tvoc, ECO2, hat, zmod4410, zmod, cv-19

Renesas Air Quality HATs

e14-publisher — Mon, 15 Aug 2022 19:01:36 GMT

Revision 20 posted to Boards by e14-publisher on 8/15/2022 7:01:36 PM

Welcome to Renesas Air Quality HATs

Support Forum

Technical Specification

ZMOD4410 | ZMOD4510

Avnet's Renesas ZMOD4410 Indoor Air Quality HAT

In addition to the ZMOD4410 sensor, the HAT incorporates a Renesas HS3001 Precision Relative Humidity and Temperature Sensor, along with software-controlled status LEDs.

Click on the images to enlarge

Top View

Block Diagram

Target Applications

Smart home appliances
Smart thermostats
Smart speakers
Smart fans
Smoke alarms
Vacuum cleaners
Garage openers
Security systems
HVAC
Air purifiers
Building automation

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT for Raspberry Pi is intended for professionals developing applications for monitoring and reporting Outdoor Air Quality (OAQ) based on gases present.

Target Applications

Air monitoring for nitrogen dioxide and ozone
Detect unhealthy conditions in outdoor air
Personal air quality monitors
Smart City instrumentation
Automation based on AQI (HCAV systems, building air purification systems)

Air Quality HATS

Benefits

Convenient Raspberry Pi HAT form factor for evaluation, development and quick prototyping of products that monitor air quality
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspberry Pi OS test / validation application
Licensed downloadable compiled code offered by Renesas.

Software Downloads

To validate the Renesas ZMOD HAT’s operation with a Raspberry Pi, Avnet provides a pre-compiled test application built with algorithm libraries which runs under the Raspberry Pi operating system (formerly Raspbian).
- Download the “out of the box” test/validation application.
Algorithm libraries developed by Renesas are required to operate the sensors. These algorithm libraries are not included with the HAT but are available directly from Renesas subject to the terms and conditions of Renesas’ Software License Agreement. An application for the Software License Agreement, along with the procedure to download the algorithms and related confidential data, is available here.
- Download Renesas’ Software License Agreement and procedure to download the ZMOD algorithm libraries and related confidential data.

Reference Designs

Software Downloads

ZMOD4410 - Software License Agreement and ZMOD algorithm libraries (html)

Technical Documents

General

ZMOD4410 Hat Block Diagram

Product Brief/Fact Sheet

ZMOD4410 Product Brief

ZMOD4510 Product Brief

Avnet Boards MPU/MCU Solutions Guide

Quick Start Guide

6002-QSC-AES-RHSEN-ZMOD44-G-v2

Schematics

ZMOD4410 Hat Schematic

Tags: iaq, zmod4510, covid, indoor air quality, cv19, raspberry pi, renesas, indoor_air_quality, tvoc, ECO2, hat, zmod4410, zmod, cv-19

Renesas Air Quality HATs

e14-publisher — Tue, 12 Jul 2022 17:05:32 GMT

Revision 19 posted to Boards by e14-publisher on 7/12/2022 5:05:32 PM

Welcome to Renesas Air Quality HATs

Technical Specification

ZMOD4410 | ZMOD4510

Avnet's Renesas ZMOD4410 Indoor Air Quality HAT

In addition to the ZMOD4410 sensor, the HAT incorporates a Renesas HS3001 Precision Relative Humidity and Temperature Sensor, along with software-controlled status LEDs.

Click on the images to enlarge

Top View

Block Diagram

Target Applications

Smart home appliances
Smart thermostats
Smart speakers
Smart fans
Smoke alarms
Vacuum cleaners
Garage openers
Security systems
HVAC
Air purifiers
Building automation

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT for Raspberry Pi is intended for professionals developing applications for monitoring and reporting Outdoor Air Quality (OAQ) based on gases present.

Target Applications

Air monitoring for nitrogen dioxide and ozone
Detect unhealthy conditions in outdoor air
Personal air quality monitors
Smart City instrumentation
Automation based on AQI (HCAV systems, building air purification systems)

Air Quality HATS

Benefits

Convenient Raspberry Pi HAT form factor for evaluation, development and quick prototyping of products that monitor air quality
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspberry Pi OS test / validation application
Licensed downloadable compiled code offered by Renesas.

Software Downloads

To validate the Renesas ZMOD HAT’s operation with a Raspberry Pi, Avnet provides a pre-compiled test application built with algorithm libraries which runs under the Raspberry Pi operating system (formerly Raspbian).
- Download the “out of the box” test/validation application.
Algorithm libraries developed by Renesas are required to operate the sensors. These algorithm libraries are not included with the HAT but are available directly from Renesas subject to the terms and conditions of Renesas’ Software License Agreement. An application for the Software License Agreement, along with the procedure to download the algorithms and related confidential data, is available here.
- Download Renesas’ Software License Agreement and procedure to download the ZMOD algorithm libraries and related confidential data.

Reference Designs

Software Downloads

ZMOD4410 - Software License Agreement and ZMOD algorithm libraries (html)

Technical Documents

General

ZMOD4410 Hat Block Diagram

Product Brief/Fact Sheet

ZMOD4410 Product Brief

ZMOD4510 Product Brief

Avnet Boards MPU/MCU Solutions Guide

Quick Start Guide

6002-QSC-AES-RHSEN-ZMOD44-G-v2

Schematics

ZMOD4410 Hat Schematic

Tags: iaq, zmod4510, covid, indoor air quality, cv19, raspberry pi, renesas, indoor_air_quality, tvoc, ECO2, hat, zmod4410, zmod, cv-19

Renesas Air Quality HATs

e14-publisher — Tue, 12 Jul 2022 17:05:00 GMT

Revision 18 posted to Boards by e14-publisher on 7/12/2022 5:05:00 PM

Welcome to Renesas Air Quality HATs

Technical Specification

ZMOD4410 | ZMOD4510

Avnet's Renesas ZMOD4410 Indoor Air Quality HAT

In addition to the ZMOD4410 sensor, the HAT incorporates a Renesas HS3001 Precision Relative Humidity and Temperature Sensor, along with software-controlled status LEDs.

Click on the images to enlarge

Top View

Block Diagram

Target Applications

Smart home appliances
Smart thermostats
Smart speakers
Smart fans
Smoke alarms
Vacuum cleaners
Garage openers
Security systems
HVAC
Air purifiers
Building automation

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT for Raspberry Pi is intended for professionals developing applications for monitoring and reporting Outdoor Air Quality (OAQ) based on gases present.

Target Applications

Air monitoring for nitrogen dioxide and ozone
Detect unhealthy conditions in outdoor air
Personal air quality monitors
Smart City instrumentation
Automation based on AQI (HCAV systems, building air purification systems)

Air Quality HATS

Benefits

Convenient Raspberry Pi HAT form factor for evaluation, development and quick prototyping of products that monitor air quality
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspberry Pi OS test / validation application
Licensed downloadable compiled code offered by Renesas.

Software Downloads

To validate the Renesas ZMOD HAT’s operation with a Raspberry Pi, Avnet provides a pre-compiled test application built with algorithm libraries which runs under the Raspberry Pi operating system (formerly Raspbian).
- Download the “out of the box” test/validation application.
Algorithm libraries developed by Renesas are required to operate the sensors. These algorithm libraries are not included with the HAT but are available directly from Renesas subject to the terms and conditions of Renesas’ Software License Agreement. An application for the Software License Agreement, along with the procedure to download the algorithms and related confidential data, is available here.
- Download Renesas’ Software License Agreement and procedure to download the ZMOD algorithm libraries and related confidential data.

Reference Designs

Software Downloads

ZMOD4410 - Software License Agreement and ZMOD algorithm libraries (html)

Technical Documents

General

ZMOD4410 Hat Block Diagram

Product Brief/Fact Sheet

ZMOD4410 Product Brief

Avnet Boards MPU/MCU Solutions Guide

ZMOD4510 Product Brief

Quick Start Guide

6002-QSC-AES-RHSEN-ZMOD44-G-v2

Schematics

ZMOD4410 Hat Schematic

Tags: iaq, zmod4510, covid, indoor air quality, cv19, raspberry pi, renesas, indoor_air_quality, tvoc, ECO2, hat, zmod4410, zmod, cv-19

Renesas Air Quality HATs

e14-publisher — Tue, 12 Jul 2022 16:59:45 GMT

Revision 17 posted to Boards by e14-publisher on 7/12/2022 4:59:45 PM

Welcome to Renesas Air Quality HATs

Technical Specification

ZMOD4410 | ZMOD4510

Avnet's Renesas ZMOD4410 Indoor Air Quality HAT

In addition to the ZMOD4410 sensor, the HAT incorporates a Renesas HS3001 Precision Relative Humidity and Temperature Sensor, along with software-controlled status LEDs.

Click on the images to enlarge

Top View

Block Diagram

Target Applications

Smart home appliances
Smart thermostats
Smart speakers
Smart fans
Smoke alarms
Vacuum cleaners
Garage openers
Security systems
HVAC
Air purifiers
Building automation

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT for Raspberry Pi is intended for professionals developing applications for monitoring and reporting Outdoor Air Quality (OAQ) based on gases present.

Target Applications

Air monitoring for nitrogen dioxide and ozone
Detect unhealthy conditions in outdoor air
Personal air quality monitors
Smart City instrumentation
Automation based on AQI (HCAV systems, building air purification systems)

Air Quality HATS

Benefits

Convenient Raspberry Pi HAT form factor for evaluation, development and quick prototyping of products that monitor air quality
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspberry Pi OS test / validation application
Licensed downloadable compiled code offered by Renesas.

Software Downloads

To validate the Renesas ZMOD HAT’s operation with a Raspberry Pi, Avnet provides a pre-compiled test application built with algorithm libraries which runs under the Raspberry Pi operating system (formerly Raspbian).
- Download the “out of the box” test/validation application.
Algorithm libraries developed by Renesas are required to operate the sensors. These algorithm libraries are not included with the HAT but are available directly from Renesas subject to the terms and conditions of Renesas’ Software License Agreement. An application for the Software License Agreement, along with the procedure to download the algorithms and related confidential data, is available here.
- Download Renesas’ Software License Agreement and procedure to download the ZMOD algorithm libraries and related confidential data.

Reference Designs

Software Downloads

ZMOD4410 - Software License Agreement and ZMOD algorithm libraries (html)

Technical Documents

General

ZMOD4410 Hat Block Diagram

Product Brief/Fact Sheet

ZMOD4410 Product Brief

Avnet Boards MPU/MCU Solutions Guide

Quick Start Guide

6002-QSC-AES-RHSEN-ZMOD44-G-v2

Schematics

ZMOD4410 Hat Schematic

Tags: iaq, zmod4510, covid, indoor air quality, cv19, raspberry pi, renesas, indoor_air_quality, tvoc, ECO2, hat, zmod4410, zmod, cv-19

Renesas Air Quality HATs

e14-publisher — Tue, 12 Jul 2022 16:57:47 GMT

Revision 16 posted to Boards by e14-publisher on 7/12/2022 4:57:47 PM

Welcome to Renesas Air Quality HATs

Technical Specification

ZMOD4410 | ZMOD4510

Avnet's Renesas ZMOD4410 Indoor Air Quality HAT

In addition to the ZMOD4410 sensor, the HAT incorporates a Renesas HS3001 Precision Relative Humidity and Temperature Sensor, along with software-controlled status LEDs.

Click on the images to enlarge

Top View

Block Diagram

Target Applications

Smart home appliances
Smart thermostats
Smart speakers
Smart fans
Smoke alarms
Vacuum cleaners
Garage openers
Security systems
HVAC
Air purifiers
Building automation

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT for Raspberry Pi is intended for professionals developing applications for monitoring and reporting Outdoor Air Quality (OAQ) based on gases present.

Target Applications

Air monitoring for nitrogen dioxide and ozone
Detect unhealthy conditions in outdoor air
Personal air quality monitors
Smart City instrumentation
Automation based on AQI (HCAV systems, building air purification systems)

Air Quality HATS

Benefits

Convenient Raspberry Pi HAT form factor for evaluation, development and quick prototyping of products that monitor air quality
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspberry Pi OS test / validation application
Licensed downloadable compiled code offered by Renesas.

Software Downloads

To validate the Renesas ZMOD HAT’s operation with a Raspberry Pi, Avnet provides a pre-compiled test application built with algorithm libraries which runs under the Raspberry Pi operating system (formerly Raspbian).
- Download the “out of the box” test/validation application.
Algorithm libraries developed by Renesas are required to operate the sensors. These algorithm libraries are not included with the HAT but are available directly from Renesas subject to the terms and conditions of Renesas’ Software License Agreement. An application for the Software License Agreement, along with the procedure to download the algorithms and related confidential data, is available here.
- Download Renesas’ Software License Agreement and procedure to download the ZMOD algorithm libraries and related confidential data.

Reference Designs

Software Downloads

ZMOD4410 - Software License Agreement and ZMOD algorithm libraries (html)

Technical Documents

General

ZMOD4410 Hat Block Diagram

Product Brief/Fact Sheet

P22 800 Renesas ZMOD4410 Product Brief al Product Brief

Avnet Boards MPU/MCU Solutions Guide

Quick Start Guide

6002-QSC-AES-RHSEN-ZMOD44-G-v2

Schematics

ZMOD4410 Hat Schematic

Tags: iaq, zmod4510, covid, indoor air quality, cv19, raspberry pi, renesas, indoor_air_quality, tvoc, ECO2, hat, zmod4410, zmod, cv-19

Renesas Air Quality HATs

e14-publisher — Tue, 12 Jul 2022 16:57:15 GMT

Revision 15 posted to Boards by e14-publisher on 7/12/2022 4:57:15 PM

Welcome to Renesas Air Quality HATs

Technical Specification

ZMOD4410 | ZMOD4510

Avnet's Renesas ZMOD4410 Indoor Air Quality HAT

In addition to the ZMOD4410 sensor, the HAT incorporates a Renesas HS3001 Precision Relative Humidity and Temperature Sensor, along with software-controlled status LEDs.

Click on the images to enlarge

Top View

Block Diagram

Target Applications

Smart home appliances
Smart thermostats
Smart speakers
Smart fans
Smoke alarms
Vacuum cleaners
Garage openers
Security systems
HVAC
Air purifiers
Building automation

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT for Raspberry Pi is intended for professionals developing applications for monitoring and reporting Outdoor Air Quality (OAQ) based on gases present.

Target Applications

Air monitoring for nitrogen dioxide and ozone
Detect unhealthy conditions in outdoor air
Personal air quality monitors
Smart City instrumentation
Automation based on AQI (HCAV systems, building air purification systems)

Air Quality HATS

Benefits

Convenient Raspberry Pi HAT form factor for evaluation, development and quick prototyping of products that monitor air quality
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspberry Pi OS test / validation application
Licensed downloadable compiled code offered by Renesas.

Software Downloads

To validate the Renesas ZMOD HAT’s operation with a Raspberry Pi, Avnet provides a pre-compiled test application built with algorithm libraries which runs under the Raspberry Pi operating system (formerly Raspbian).
- Download the “out of the box” test/validation application.
Algorithm libraries developed by Renesas are required to operate the sensors. These algorithm libraries are not included with the HAT but are available directly from Renesas subject to the terms and conditions of Renesas’ Software License Agreement. An application for the Software License Agreement, along with the procedure to download the algorithms and related confidential data, is available here.
- Download Renesas’ Software License Agreement and procedure to download the ZMOD algorithm libraries and related confidential data.

Reference Designs

Software Downloads

ZMOD4410 - Software License Agreement and ZMOD algorithm libraries (html)

Technical Documents

General

ZMOD4410 Hat Block Diagram

Product Brief/Fact Sheet

P22 800 Renesas ZMOD4410 Product Brief al Product Brief

Avnet Boards MPU/MCU Solutions Guide

Quick Start Guide

6002-QSC-AES-RHSEN-ZMOD44-G-v2

Schematics

ZMOD4410 Hat Schematic

Tags: iaq, zmod4510, covid, indoor air quality, cv19, raspberry pi, renesas, indoor_air_quality, tvoc, ECO2, hat, zmod4410, zmod, cv-19

Renesas Air Quality HATs

e14-publisher — Thu, 27 Jan 2022 16:09:35 GMT

Revision 14 posted to Boards by e14-publisher on 1/27/2022 4:09:35 PM

Welcome to Renesas Air Quality HATs

Technical Specification

ZMOD4410 | ZMOD4510

Avnet's Renesas ZMOD4410 Indoor Air Quality HAT

In addition to the ZMOD4410 sensor, the HAT incorporates a Renesas HS3001 Precision Relative Humidity and Temperature Sensor, along with software-controlled status LEDs.

Click on the images to enlarge

Top View

Block Diagram

Target Applications

Smart home appliances
Smart thermostats
Smart speakers
Smart fans
Smoke alarms
Vacuum cleaners
Garage openers
Security systems
HVAC
Air purifiers
Building automation

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT for Raspberry Pi is intended for professionals developing applications for monitoring and reporting Outdoor Air Quality (OAQ) based on gases present.

Target Applications

Air monitoring for nitrogen dioxide and ozone
Detect unhealthy conditions in outdoor air
Personal air quality monitors
Smart City instrumentation
Automation based on AQI (HCAV systems, building air purification systems)

Air Quality HATS

Benefits

Convenient Raspberry Pi HAT form factor for evaluation, development and quick prototyping of products that monitor air quality
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspberry Pi OS test / validation application
Licensed downloadable compiled code offered by Renesas.

Software Downloads

To validate the Renesas ZMOD HAT’s operation with a Raspberry Pi, Avnet provides a pre-compiled test application built with algorithm libraries which runs under the Raspberry Pi operating system (formerly Raspbian).
- Download the “out of the box” test/validation application.
Algorithm libraries developed by Renesas are required to operate the sensors. These algorithm libraries are not included with the HAT but are available directly from Renesas subject to the terms and conditions of Renesas’ Software License Agreement. An application for the Software License Agreement, along with the procedure to download the algorithms and related confidential data, is available here.
- Download Renesas’ Software License Agreement and procedure to download the ZMOD algorithm libraries and related confidential data.

Reference Designs

Software Downloads

ZMOD4410 - Software License Agreement and ZMOD algorithm libraries (html)

Technical Documents

General

ZMOD4410 Hat Block Diagram

Product Brief/Fact Sheet

5388-PB-AES-RENESAS-Pi-HAT-V1-v3a (pdf

Avnet Boards MPU/MCU Solutions Guide

Quick Start Guide

6002-QSC-AES-RHSEN-ZMOD44-G-v2

Schematics

ZMOD4410 Hat Schematic

Tags: iaq, zmod4510, covid, indoor air quality, cv19, raspberry pi, renesas, indoor_air_quality, tvoc, ECO2, hat, zmod4410, zmod, cv-19

Renesas Air Quality HATs

e14-publisher — Wed, 26 Jan 2022 22:16:58 GMT

Revision 13 posted to Boards by e14-publisher on 1/26/2022 10:16:58 PM

Welcome to Renesas Air Quality HATs

Technical Specification

ZMOD4410 | ZMOD4510

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT for Raspberry Pi is intended for professionals developing applications for monitoring and reporting Outdoor Air Quality (OAQ) based on gases present.

Target Applications

Air monitoring for nitrogen dioxide and ozone
Detect unhealthy conditions in outdoor air
Personal air quality monitors
Smart City instrumentation
Automation based on AQI (HCAV systems, building air purification systems)

Avnet's Renesas ZMOD4410 Indoor Air Quality HAT

In addition to the ZMOD4410 sensor, the HAT incorporates a Renesas HS3001 Precision Relative Humidity and Temperature Sensor, along with software-controlled status LEDs.

Click on the images to enlarge

Top View

Block Diagram

Target Applications

Smart home appliances
Smart thermostats
Smart speakers
Smart fans
Smoke alarms
Vacuum cleaners
Garage openers
Security systems
HVAC
Air purifiers
Building automation

Air Quality HATS

Benefits

Convenient Raspberry Pi HAT form factor for evaluation, development and quick prototyping of products that monitor air quality
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspberry Pi OS test / validation application
Licensed downloadable compiled code offered by Renesas.

Software Downloads

To validate the Renesas ZMOD HAT’s operation with a Raspberry Pi, Avnet provides a pre-compiled test application built with algorithm libraries which runs under the Raspberry Pi operating system (formerly Raspbian).
- Download the “out of the box” test/validation application.
Algorithm libraries developed by Renesas are required to operate the sensors. These algorithm libraries are not included with the HAT but are available directly from Renesas subject to the terms and conditions of Renesas’ Software License Agreement. An application for the Software License Agreement, along with the procedure to download the algorithms and related confidential data, is available here.
- Download Renesas’ Software License Agreement and procedure to download the ZMOD algorithm libraries and related confidential data.

Reference Designs

Software Downloads

ZMOD4410 - Software License Agreement and ZMOD algorithm libraries (html)

Technical Documents

General

ZMOD4410 Hat Block Diagram

Product Brief/Fact Sheet

5388-PB-AES-RENESAS-Pi-HAT-V1-v3a (pdf

Avnet Boards MPU/MCU Solutions Guide

Quick Start Guide

6002-QSC-AES-RHSEN-ZMOD44-G-v2

Schematics

ZMOD4410 Hat Schematic

Tags: iaq, zmod4510, covid, indoor air quality, cv19, raspberry pi, renesas, indoor_air_quality, tvoc, ECO2, hat, zmod4410, zmod, cv-19

Renesas Air Quality HATs

e14-publisher — Wed, 26 Jan 2022 22:15:11 GMT

Revision 12 posted to Boards by e14-publisher on 1/26/2022 10:15:11 PM

Welcome to Renesas Air Quality HATs

Technical Specification

ZMOD4410 | ZMOD4510

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT

Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT for Raspberry Pi is intended for professionals developing applications for monitoring and reporting Outdoor Air Quality (OAQ) based on gases present.

Target Applications

Air monitoring for nitrogen dioxide and ozone
Detect unhealthy conditions in outdoor air
Personal air quality monitors
Smart City instrumentation
Automation based on AQI (HCAV systems, building air purification systems)

Avnet's Renesas ZMOD4410 Indoor Air Quality HAT

In addition to the ZMOD4410 sensor, the HAT incorporates a Renesas HS3001 Precision Relative Humidity and Temperature Sensor, along with software-controlled status LEDs.

Click on the images to enlarge

Top View

Block Diagram

Target Applications

Smart home appliances
Smart thermostats
Smart speakers
Smart fans
Smoke alarms
Vacuum cleaners
Garage openers
Security systems
HVAC
Air purifiers
Building automation

Air Quality HATS

Benefits

Convenient Raspberry Pi HAT form factor for evaluation, development and quick prototyping of products that monitor air quality
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspberry Pi OS test / validation application
Licensed downloadable compiled code offered by Renesas.

Software Downloads

To validate the Renesas ZMOD HAT’s operation with a Raspberry Pi, Avnet provides a pre-compiled test application built with algorithm libraries which runs under the Raspberry Pi operating system (formerly Raspbian).
- Download the “out of the box” test/validation application.
Algorithm libraries developed by Renesas are required to operate the sensors. These algorithm libraries are not included with the HAT but are available directly from Renesas subject to the terms and conditions of Renesas’ Software License Agreement. An application for the Software License Agreement, along with the procedure to download the algorithms and related confidential data, is available here.
- Download Renesas’ Software License Agreement and procedure to download the ZMOD algorithm libraries and related confidential data.

Features

Convenient Raspberry Pi Hat form factor for evaluation, development and quick-prototyping of products that monitor Indoor Air Quality
Detects a wide range of TVOC, from parts-per-billion to parts-per-million and provides eCO2 levels
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspbian application
Renesas offers licensed downloadable compiled code, enabling a product road map of indoor air measurement innovation

Reference Designs

Software Downloads

ZMOD4410 - Software License Agreement and ZMOD algorithm libraries (html)

Technical Documents

General

ZMOD4410 Hat Block Diagram

Product Brief/Fact Sheet

5388-PB-AES-RENESAS-Pi-HAT-V1-v3a (pdf

Avnet Boards MPU/MCU Solutions Guide

Quick Start Guide

6002-QSC-AES-RHSEN-ZMOD44-G-v2

Schematics

ZMOD4410 Hat Schematic

Tags: iaq, zmod4510, covid, indoor air quality, cv19, raspberry pi, renesas, indoor_air_quality, tvoc, ECO2, hat, zmod4410, zmod, cv-19

Renesas Air Quality HATs

e14-publisher — Wed, 26 Jan 2022 22:00:53 GMT

Revision 11 posted to Boards by e14-publisher on 1/26/2022 10:00:53 PM

Welcome to Renesas Air Quality HATs

Technical Specification

Avnet's Renesas ZMOD4410 Indoor Air Quality HAT for Raspberry Pi is an evaluation, development and quick-prototyping tool intended for professionals developing a wide variety of mains-powered and battery-powered products with indoor air quality monitoring capability. The HAT features an on-board calibrated ZMOD4410 sensor that measures the concentrations of Total Volatile Organic Compounds (TVOC) and can estimate carbon dioxide (eCO2) levels. These are important indicators for monitoring indoor air quality. All sensors are electrically and chemically (gas) tested with calibration data stored in the ZMOD4410’s built-in nonvolatile memory.

In addition to the ZMOD4410 sensor, the HAT incorporates a Renesas HS3001 Precision Relative Humidity and Temperature Sensor, along with software-controlled status LEDs.

Please note that algorithm libraries developed by Renesas are required to operate the ZMOD4410 sensor and convert its data into TVOC and eCO2 measurements. These algorithm libraries are not included with the HAT, but are available directly from Renesas subject to the terms and conditions of Renesas’ Software License Agreement. An application for the ZMOD4410 Software License Agreement, along with the procedure to download the algorithms and related confidential data, is available here.

To validate the HAT’s operation and begin measuring TVOC and eCO2 “out of the box” with a Raspberry Pi solution, Avnet provides a pre-compiled test application built with those algorithm libraries that runs under the Raspberry Pi operating system (formerly Raspbian).

Click on the images to enlarge

Top View

Block Diagram

Benefits

Convenient Raspberry Pi HAT form factor for evaluation, development and quick prototyping of products that monitor air quality
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspberry Pi OS test / validation application
Licensed downloadable compiled code offered by Renesas.

Software Downloads

To validate the Renesas ZMOD HAT’s operation with a Raspberry Pi, Avnet provides a pre-compiled test application built with algorithm libraries which runs under the Raspberry Pi operating system (formerly Raspbian).
- Download the “out of the box” test/validation application.
Algorithm libraries developed by Renesas are required to operate the sensors. These algorithm libraries are not included with the HAT but are available directly from Renesas subject to the terms and conditions of Renesas’ Software License Agreement. An application for the Software License Agreement, along with the procedure to download the algorithms and related confidential data, is available here.
- Download Renesas’ Software License Agreement and procedure to download the ZMOD algorithm libraries and related confidential data.

Features

Convenient Raspberry Pi Hat form factor for evaluation, development and quick-prototyping of products that monitor Indoor Air Quality
Detects a wide range of TVOC, from parts-per-billion to parts-per-million and provides eCO2 levels
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspbian application
Renesas offers licensed downloadable compiled code, enabling a product road map of indoor air measurement innovation

Target Applications

Smart home appliances
Smart thermostats
Smart speakers
Smart fans
Smoke alarms
Vacuum cleaners
Garage openers
Security systems
HVAC
Air purifiers
Building automation

Reference Designs

Software Downloads

ZMOD4410 - Software License Agreement and ZMOD algorithm libraries (html)

Technical Documents

General

ZMOD4410 Hat Block Diagram

Product Brief/Fact Sheet

5388-PB-AES-RENESAS-Pi-HAT-V1-v3a (pdf

Avnet Boards MPU/MCU Solutions Guide

Quick Start Guide

6002-QSC-AES-RHSEN-ZMOD44-G-v2

Schematics

ZMOD4410 Hat Schematic

Tags: iaq, zmod4510, covid, indoor air quality, cv19, raspberry pi, renesas, indoor_air_quality, tvoc, ECO2, hat, zmod4410, zmod, cv-19

Renesas Air Quality HATs

e14-publisher — Wed, 26 Jan 2022 21:56:03 GMT

Revision 10 posted to Boards by e14-publisher on 1/26/2022 9:56:03 PM

Welcome to Renesas Air Quality HATs

Technical Specification

In addition to the ZMOD4410 sensor, the HAT incorporates a Renesas HS3001 Precision Relative Humidity and Temperature Sensor, along with software-controlled status LEDs.

Click on the images to enlarge

Top View

Block Diagram

Benefits

Convenient Raspberry Pi HAT form factor for evaluation, development and quick prototyping of products that monitor air quality
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspberry Pi OS test / validation application
Licensed downloadable compiled code offered by Renesas.

Features

Convenient Raspberry Pi Hat form factor for evaluation, development and quick-prototyping of products that monitor Indoor Air Quality
Detects a wide range of TVOC, from parts-per-billion to parts-per-million and provides eCO2 levels
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspbian application
Renesas offers licensed downloadable compiled code, enabling a product road map of indoor air measurement innovation

Target Applications

Smart home appliances
Smart thermostats
Smart speakers
Smart fans
Smoke alarms
Vacuum cleaners
Garage openers
Security systems
HVAC
Air purifiers
Building automation

Reference Designs

Software Downloads

ZMOD4410 - Software License Agreement and ZMOD algorithm libraries (html)

Technical Documents

General

ZMOD4410 Hat Block Diagram

Product Brief/Fact Sheet

5388-PB-AES-RENESAS-Pi-HAT-V1-v3a (pdf

Avnet Boards MPU/MCU Solutions Guide

Quick Start Guide

6002-QSC-AES-RHSEN-ZMOD44-G-v2

Schematics

ZMOD4410 Hat Schematic

Tags: iaq, zmod4510, covid, indoor air quality, cv19, raspberry pi, renesas, indoor_air_quality, tvoc, ECO2, hat, zmod4410, zmod, cv-19

ZMOD4410 Indoor Air Quality HAT

e14-publisher — Thu, 16 Dec 2021 20:10:45 GMT

Revision 9 posted to Boards by e14-publisher on 12/16/2021 8:10:45 PM

Welcome to ZMOD4410 Indoor Air Quality HAT

Avnet's Renesas ZOMD4410 is an indoor air quality development tool for the Raspberry Pi.

Technical Specification

In addition to the ZMOD4410 sensor, the HAT incorporates a Renesas HS3001 Precision Relative Humidity and Temperature Sensor, along with software-controlled status LEDs.

Click on the images to enlarge

Top View

Block Diagram

Benefits

Convenient Raspberry Pi HAT form factor for evaluation, development and quick prototyping of products that monitor indoor air quality
Detects a wide range of TVOC, from parts-per-billion to parts-per-million and provides eCO2 levels
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output

Features

Convenient Raspberry Pi Hat form factor for evaluation, development and quick-prototyping of products that monitor Indoor Air Quality
Detects a wide range of TVOC, from parts-per-billion to parts-per-million and provides eCO2 levels
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspbian application
Renesas offers licensed downloadable compiled code, enabling a product road map of indoor air measurement innovation

Target Applications

Smart home appliances
Smart thermostats
Smart speakers
Smart fans
Smoke alarms
Vacuum cleaners
Garage openers
Security systems
HVAC
Air purifiers
Building automation

Reference Designs

Software Downloads

ZMOD4410 - Software License Agreement and ZMOD algorithm libraries (html)

Technical Documents

General

ZMOD4410 Hat Block Diagram

Product Brief/Fact Sheet

5388-PB-AES-RENESAS-Pi-HAT-V1-v3a (pdf

Avnet Boards MPU/MCU Solutions Guide

Quick Start Guide

6002-QSC-AES-RHSEN-ZMOD44-G-v2

Schematics

ZMOD4410 Hat Schematic

Tags: iaq, covid, indoor air quality, cv19, raspberry pi, renesas, indoor_air_quality, tvoc, ECO2, hat, zmod4410, zmod, cv-19

ZMOD4410 Indoor Air Quality HAT

e14-publisher — Thu, 16 Dec 2021 03:30:03 GMT

Revision 8 posted to Boards by e14-publisher on 12/16/2021 3:30:03 AM

Welcome to ZMOD4410 Indoor Air Quality HAT

Avnet's Renesas ZOMD4410 is an indoor air quality development tool for the Raspberry Pi.

Technical Specification

In addition to the ZMOD4410 sensor, the HAT incorporates a Renesas HS3001 Precision Relative Humidity and Temperature Sensor, along with software-controlled status LEDs.

Click on the images to enlarge

Top View

Block Diagram

Benefits

Convenient Raspberry Pi HAT form factor for evaluation, development and quick prototyping of products that monitor indoor air quality
Detects a wide range of TVOC, from parts-per-billion to parts-per-million and provides eCO2 levels
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output

Features

Convenient Raspberry Pi Hat form factor for evaluation, development and quick-prototyping of products that monitor Indoor Air Quality
Detects a wide range of TVOC, from parts-per-billion to parts-per-million and provides eCO2 levels
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspbian application
Renesas offers licensed downloadable compiled code, enabling a product road map of indoor air measurement innovation

Target Applications

Smart home appliances
Smart thermostats
Smart speakers
Smart fans
Smoke alarms
Vacuum cleaners
Garage openers
Security systems
HVAC
Air purifiers
Building automation

Reference Designs

Software Downloads

ZMOD4410 - Software License Agreement and ZMOD algorithm libraries (html)

Technical Documents

General

ZMOD4410 Hat Block Diagram

Product Brief/Fact Sheet

5388-PB-AES-RENESAS-Pi-HAT-V1-v3a (pdf

Avnet Boards MPU/MCU Solutions Guide

Quick Start Guide

6002-QSC-AES-RHSEN-ZMOD44-G-v2

Schematics

ZMOD4410 Hat Schematic

Tags: iaq, covid, indoor air quality, cv19, raspberry pi, renesas, indoor_air_quality, tvoc, ECO2, hat, zmod4410, zmod, cv-19

ZMOD4410 Indoor Air Quality HAT

e14-publisher — Mon, 01 Nov 2021 17:07:34 GMT

Revision 7 posted to Boards by e14-publisher on 11/1/2021 5:07:34 PM

Welcome to ZMOD4410 Indoor Air Quality HAT

Avnet's Renesas ZOMD4410 is an indoor air quality development tool for the Raspberry Pi.

Technical Specification

In addition to the ZMOD4410 sensor, the HAT incorporates a Renesas HS3001 Precision Relative Humidity and Temperature Sensor, along with software-controlled status LEDs.

Click on the images to enlarge

Top View

Block Diagram

Benefits

Convenient Raspberry Pi HAT form factor for evaluation, development and quick prototyping of products that monitor indoor air quality
Detects a wide range of TVOC, from parts-per-billion to parts-per-million and provides eCO2 levels
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output

Features

Convenient Raspberry Pi Hat form factor for evaluation, development and quick-prototyping of products that monitor Indoor Air Quality
Detects a wide range of TVOC, from parts-per-billion to parts-per-million and provides eCO2 levels
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspbian application
Renesas offers licensed downloadable compiled code, enabling a product road map of indoor air measurement innovation

Target Applications

Smart home appliances
Smart thermostats
Smart speakers
Smart fans
Smoke alarms
Vacuum cleaners
Garage openers
Security systems
HVAC
Air purifiers
Building automation

Reference Designs

Software Downloads

ZMOD4410 - Software License Agreement and ZMOD algorithm libraries (html)

Technical Documents

General

ZMOD4410 Hat Block Diagram

Product Brief/Fact Sheet

5388-PB-AES-RENESAS-Pi-HAT-V1-v3a (pdf

Avnet Boards MPU/MCU Solutions Guide

Quick Start Guide

6002-QSC-AES-RHSEN-ZMOD44-G-v2

Schematics

ZMOD4410 Hat Schematic

Tags: iaq, covid, indoor air quality, cv19, raspberry pi, renesas, indoor_air_quality, tvoc, ECO2, hat, zmod4410, zmod, cv-19

ZMOD4410 Indoor Air Quality HAT

e14-publisher — Thu, 28 Oct 2021 17:29:37 GMT

Revision 6 posted to Boards by e14-publisher on 10/28/2021 5:29:37 PM

Welcome to ZMOD4410 Indoor Air Quality HAT

Avnet's Renesas ZOMD4410 is an indoor air quality development tool for the Raspberry Pi.

Support Forum

-->

Technical Specification

In addition to the ZMOD4410 sensor, the HAT incorporates a Renesas HS3001 Precision Relative Humidity and Temperature Sensor, along with software-controlled status LEDs.

Click on the images to enlarge

Top View

Block Diagram

Benefits

Convenient Raspberry Pi HAT form factor for evaluation, development and quick prototyping of products that monitor indoor air quality
Detects a wide range of TVOC, from parts-per-billion to parts-per-million and provides eCO2 levels
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output

Features

Convenient Raspberry Pi Hat form factor for evaluation, development and quick-prototyping of products that monitor Indoor Air Quality
Detects a wide range of TVOC, from parts-per-billion to parts-per-million and provides eCO2 levels
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspbian application
Renesas offers licensed downloadable compiled code, enabling a product road map of indoor air measurement innovation

Target Applications

Smart home appliances
Smart thermostats
Smart speakers
Smart fans
Smoke alarms
Vacuum cleaners
Garage openers
Security systems
HVAC
Air purifiers
Building automation

Reference Designs

Software Downloads

ZMOD4410 - Software License Agreement and ZMOD algorithm libraries (html)

Technical Documents

General

ZMOD4410 Hat Block Diagram

Product Brief/Fact Sheet

5388-PB-AES-RENESAS-Pi-HAT-V1-v3a (pdf

Avnet Boards MPU/MCU Solutions Guide

Quick Start Guide

6002-QSC-AES-RHSEN-ZMOD44-G-v2

Schematics

ZMOD4410 Hat Schematic

Tags: iaq, covid, indoor air quality, cv19, raspberry pi, renesas, indoor_air_quality, tvoc, ECO2, hat, zmod4410, zmod, cv-19

Renesas ZMOD4410 Indoor Air Quality HAT

e14-publisher — Tue, 26 Oct 2021 19:38:40 GMT

Revision 5 posted to Boards by e14-publisher on 10/26/2021 7:38:40 PM

Welcome to Renesas ZMOD4410 Indoor Air Quality HAT

Avnet's Renesas ZOMD4410 is an indoor air quality development tool for the Raspberry Pi.

Support Forum

Technical Specification

In addition to the ZMOD4410 sensor, the HAT incorporates a Renesas HS3001 Precision Relative Humidity and Temperature Sensor, along with software-controlled status LEDs.

Click on the images to enlarge

Top View

Block Diagram

Benefits

Convenient Raspberry Pi HAT form factor for evaluation, development and quick prototyping of products that monitor indoor air quality
Detects a wide range of TVOC, from parts-per-billion to parts-per-million and provides eCO2 levels
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output

Features

Convenient Raspberry Pi Hat form factor for evaluation, development and quick-prototyping of products that monitor Indoor Air Quality
Detects a wide range of TVOC, from parts-per-billion to parts-per-million and provides eCO2 levels
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspbian application
Renesas offers licensed downloadable compiled code, enabling a product road map of indoor air measurement innovation

Target Applications

Smart home appliances
Smart thermostats
Smart speakers
Smart fans
Smoke alarms
Vacuum cleaners
Garage openers
Security systems
HVAC
Air purifiers
Building automation

Reference Designs

Software Downloads

ZMOD4410 - Software License Agreement and ZMOD algorithm libraries (html)

Technical Documents

General

ZMOD4410 Hat Block Diagram

Product Brief/Fact Sheet

5388-PB-AES-RENESAS-Pi-HAT-V1-v3a (pdf

Avnet Boards MPU/MCU Solutions Guide

Quick Start Guide

6002-QSC-AES-RHSEN-ZMOD44-G-v2

Schematics

ZMOD4410 Hat Schematic

Tags: iaq, covid, indoor air quality, cv19, raspberry pi, renesas, indoor_air_quality, tvoc, ECO2, hat, zmod4410, zmod, cv-19

Renesas ZMOD4410 Indoor Air Quality HAT

e14-publisher — Tue, 26 Oct 2021 16:36:03 GMT

Revision 4 posted to Boards by e14-publisher on 10/26/2021 4:36:03 PM

Welcome to Renesas ZMOD4410 Indoor Air Quality HAT

Avnet's Renesas ZOMD4410 is an indoor air quality development tool for the Raspberry Pi.

Support Forum

Technical Specification

In addition to the ZMOD4410 sensor, the HAT incorporates a Renesas HS3001 Precision Relative Humidity and Temperature Sensor, along with software-controlled status LEDs.

Benefits:

Convenient Raspberry Pi HAT form factor for evaluation, development and quick prototyping of products that monitor indoor air quality
Detects a wide range of TVOC, from parts-per-billion to parts-per-million and provides eCO2 levels
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output

Applications:

Smart home appliances
Smart thermostats
Smart speakers
Smart fans
Smoke alarms
Vacuum cleaners
Garage openers
Security systems
HVAC
Air purifiers
Building automation

Features

Convenient Raspberry Pi Hat form factor for evaluation, development and quick-prototyping of products that monitor Indoor Air Quality
Detects a wide range of TVOC, from parts-per-billion to parts-per-million and provides eCO2 levels
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspbian application
Renesas offers licensed downloadable compiled code, enabling a product road map of indoor air measurement innovation

Reference Designs

Software Downloads

ZMOD4410 - Software License Agreement and ZMOD algorithm libraries (html)

Technical Documents

General

ZMOD4410 Hat Block Diagram

Product Brief/Fact Sheet

5388-PB-AES-RENESAS-Pi-HAT-V1-v3a (pdf

Avnet Boards MPU/MCU Solutions Guide

Quick Start Guide

6002-QSC-AES-RHSEN-ZMOD44-G-v2

Schematics

ZMOD4410 Hat Schematic

Tags: iaq, covid, indoor air quality, cv19, raspberry pi, renesas, indoor_air_quality, tvoc, ECO2, hat, zmod4410, zmod, cv-19

Renesas ZMOD4410 Indoor Air Quality HAT

e14-publisher — Fri, 22 Oct 2021 20:14:39 GMT

Revision 3 posted to Boards by e14-publisher on 10/22/2021 8:14:39 PM

Welcome to Renesas ZMOD4410 Indoor Air Quality HAT

Avnet's Renesas ZOMD4410 is an indoor air quality development tool for the Raspberry Pi.

Support Forum

Technical Specification

In addition to the ZMOD4410 sensor, the HAT incorporates a Renesas HS3001 Precision Relative Humidity and Temperature Sensor, along with software-controlled status LEDs.

Benefits:

Convenient Raspberry Pi HAT form factor for evaluation, development and quick prototyping of products that monitor indoor air quality
Detects a wide range of TVOC, from parts-per-billion to parts-per-million and provides eCO2 levels
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output

Applications:

Smart home appliances
Smart thermostats
Smart speakers
Smart fans
Smoke alarms
Vacuum cleaners
Garage openers
Security systems
HVAC
Air purifiers
Building automation

Features

Convenient Raspberry Pi Hat form factor for evaluation, development and quick-prototyping of products that monitor Indoor Air Quality
Detects a wide range of TVOC, from parts-per-billion to parts-per-million and provides eCO2 levels
Sensors are chemically tested and factory calibrated
On-board user-adjustable power supply option and current measurement connection points
Configurable alarm/interrupt output
Supplied with pre-compiled Raspbian application
Renesas offers licensed downloadable compiled code, enabling a product road map of indoor air measurement innovation

Reference Designs

Software Downloads

ZMOD4410 - Software License Agreement and ZMOD algorithm libraries (html)

Technical Documents

General

ZMOD4410 Hat Block Diagram

Product Brief/Fact Sheet

5388-PB-AES-RENESAS-Pi-HAT-V1-v3a (pdf

Avnet Boards MPU/MCU Solutions Guide

Quick Start Guide

6002-QSC-AES-RHSEN-ZMOD44-G-v2

Schematics

ZMOD4410 Hat Schematic

Tags: iaq, covid, indoor air quality, cv19, raspberry pi, renesas, indoor_air_quality, tvoc, ECO2, hat, zmod4410, zmod, cv-19