ZUBoard 1CG

e14-publisher — Mon, 01 May 2023 20:18:34 GMT

Current Revision posted to Boards by e14-publisher on 5/1/2023 8:18:34 PM

Welcome to ZUBoard 1CG

Flexible and versatile. Great for designing complex experiments for Artificial Intelligence and Machine Learning, and for investigating the AMD-Xilinx Zynq® UltraScale+™ architecture, Vivado and Vitis!

Support Forum

Technical Specification

The ZUBoard 1CG provides the flexibility and versatility for engineers to experiment with and learn the AMD-Xilinx Zynq ® UltraScale+ ™ architecture. The affordable ZU1CG device features 81K programmable logic cells with a Dual-core Arm ® Cortex ®-A53 MPCore ™ and Dual-core Arm Cortex-R5F MPCore, as well as cache and on-chip memory. The board also features 1GB of ISSI LPDDR4 with non-volatile boot options in the 256Mb ISSI QSPI Flash or a microSD card slot. Product Brief (Datasheet)

Microchip PHYs enable both 10/100/1000 Ethernet and USB 2.0 Host. A microUSB port provides on-board JTAG/UART access. Microchip oscillators and ECS crystals provide clocking to the ZU1 device, the on-chip real-time clock, JTAG, and communication interfaces. Power the board through USB-C with a Microchip controller and TDK μPOL ™ power modules. A combination of slide switches, push buttons, mono- and RGB-LEDs allow user interaction with the board. Both temperature and pressure sensors from ST Micro add environmental data to the system. Additionally, all four ZU+ PS GTR transceivers, 18 PS MIO, and 69 PL I/Os are exposed through three Samtec expansion connectors and one Click Board™ sites.

With a Vivado-enabled board definition file and PetaLinux BSP, you will be up and running in no time! Whether you want to explore bare metal, Linux, or Vitis AI accelerators, the ZUBoard 1CG will give you a base foundation to experiment.

Click on the images to enlarge

Top View

Left View

Right View

Left Angle View

Right Angle View

Bottom View

Features

AMD/Xilinx ZU+ MPSoC ZU1CG
- Dual A53 APU and Dual R5 RPU
- 256KB On-chip Memory
- 81,900 FPGA Logic Cells
ISSI 1GB LPDDR4 with on-chip ECC
Boot from ISSI 256Mb QSPI or microSD card
PetaLinux environment available for download
Microchip 10/100/1000 Wired Ethernet PHY and MAC ID EEPROM
Microchip USB 2.0 PHY
Microchip USB-C input power control
Dialog GreenPAK™ on/off controller and power sequencer
TDK μPOL™ power modules
On-board JTAG and UART debug interface
ST Micro Temperature and Pressure Sensors
Battery-backed Real-Time Clock and FPGA Bitstream Security enabled with ECS and Custom Power
3 High Speed Expansions and 1 Click, enabled by Samtec connectors
User RGB and Monochrome LEDs
User Slide Switch and Push Button I/O

Target Applications

Artificial intelligence
Machine learning
Embedded Vision
Embedded processing
Robotics

Kit Includes

ZUBoard 1CG
Quick-start card
Free downloadable AMD-Xilinx Vitis and Vivado ML Standard Edition
Free downloadable PetaLinux BSP and reference designs

Technical Documents

Product Brief

Block Diagram

Tags: avnet, ZUBoard, ZUBoard_1CG

ZUBoard 1CG

e14-publisher — Thu, 16 Mar 2023 20:45:21 GMT

Revision 14 posted to Boards by e14-publisher on 3/16/2023 8:45:21 PM

Welcome to ZUBoard 1CG

Support Forum

Technical Specification

Click on the images to enlarge

Top View

Left View

Right View

Left Angle View

Right Angle View

Bottom View

Features

AMD/Xilinx ZU+ MPSoC ZU1CG
- Dual A53 APU and Dual R5 RPU
- 256KB On-chip Memory
- 81,900 FPGA Logic Cells
ISSI 1GB LPDDR4 with on-chip ECC
Boot from ISSI 256Mb QSPI or microSD card
PetaLinux environment available for download
Microchip 10/100/1000 Wired Ethernet PHY and MAC ID EEPROM
Microchip USB 2.0 PHY
Microchip USB-C input power control
Dialog GreenPAK™ on/off controller and power sequencer
TDK μPOL™ power modules
On-board JTAG and UART debug interface
ST Micro Temperature and Pressure Sensors
Battery-backed Real-Time Clock and FPGA Bitstream Security enabled with ECS and Custom Power
3 High Speed Expansions and 1 Click, enabled by Samtec connectors
User RGB and Monochrome LEDs
User Slide Switch and Push Button I/O

Target Applications

Artificial intelligence
Machine learning
Embedded Vision
Embedded processing
Robotics

Kit Includes

ZUBoard 1CG
Quick-start card
Free downloadable AMD-Xilinx Vitis and Vivado ML Standard Edition
Free downloadable PetaLinux BSP and reference designs

Technical Documents

Product Brief

Block Diagram

Tags: avnet, ZUBoard, ZUBoard_1CG

ZUBoard 1CG

e14-publisher — Thu, 16 Mar 2023 20:24:49 GMT

Revision 13 posted to Boards by e14-publisher on 3/16/2023 8:24:49 PM

Welcome to ZUBoard 1CG

Support Forum

Technical Specification

Click on the images to enlarge

Top View

Left View

Right View

Left Angle View

Right Angle View

Bottom View

Features

AMD/Xilinx ZU+ MPSoC ZU1CG
- Dual A53 APU and Dual R5 RPU
- 256KB On-chip Memory
- 81,900 FPGA Logic Cells
ISSI 1GB LPDDR4 with on-chip ECC
Boot from ISSI 256Mb QSPI or microSD card
PetaLinux environment available for download
Microchip 10/100/1000 Wired Ethernet PHY and MAC ID EEPROM
Microchip USB 2.0 PHY
Microchip USB-C input power control
Dialog GreenPAK™ on/off controller and power sequencer
TDK μPOL™ power modules
On-board JTAG and UART debug interface
ST Micro Temperature and Pressure Sensors
Battery-backed Real-Time Clock and FPGA Bitstream Security enabled with ECS and Custom Power
3 High Speed Expansions and 1 Click, enabled by Samtec connectors
User RGB and Monochrome LEDs
User Slide Switch and Push Button I/O

Target Applications

Artificial intelligence
Machine learning
Embedded Vision
Embedded processing
Robotics

Kit Includes

ZUBoard 1CG
Quick-start card
Free downloadable AMD-Xilinx Vitis and Vivado ML Standard Edition
Free downloadable PetaLinux BSP and reference designs

Technical Documents

Product Brief

Block Diagram

Tags: avnet, ZUBoard, ZUBoard_1CG

ZUBoard 1CG

e14-publisher — Thu, 16 Mar 2023 20:23:16 GMT

Revision 12 posted to Boards by e14-publisher on 3/16/2023 8:23:16 PM

Welcome to ZUBoard 1CG

Support Forum

Technical Specification

Click on the images to enlarge

Top View

Left View

Right View

Left Angle View

Right Angle View

Bottom View

Features

AMD/Xilinx ZU+ MPSoC ZU1CG
- Dual A53 APU and Dual R5 RPU
- 256KB On-chip Memory
- 81,900 FPGA Logic Cells
ISSI 1GB LPDDR4 with on-chip ECC
Boot from ISSI 256Mb QSPI or microSD card
PetaLinux environment available for download
Microchip 10/100/1000 Wired Ethernet PHY and MAC ID EEPROM
Microchip USB 2.0 PHY
Microchip USB-C input power control
Dialog GreenPAK™ on/off controller and power sequencer
TDK μPOL™ power modules
On-board JTAG and UART debug interface
ST Micro Temperature and Pressure Sensors
Battery-backed Real-Time Clock and FPGA Bitstream Security enabled with ECS and Custom Power
3 High Speed Expansions and 1 Click, enabled by Samtec connectors
User RGB and Monochrome LEDs
User Slide Switch and Push Button I/O

Target Applications

Artificial intelligence
Machine learning
Embedded Vision
Embedded processing
Robotics

Kit Includes

ZUBoard 1CG
Quick-start card
Free downloadable AMD-Xilinx Vitis and Vivado ML Standard Edition
Free downloadable PetaLinux BSP and reference designs

Technical Documents

Product Brief

Block Diagram

Tags: avnet, ZUBoard, ZUBoard_1CG

ZUBoard 1CG

e14-publisher — Thu, 16 Mar 2023 20:20:42 GMT

Revision 11 posted to Boards by e14-publisher on 3/16/2023 8:20:42 PM

Welcome to ZUBoard 1CG

Support Forum

Technical Specification

Click on the images to enlarge

Top View

Left View

Right View

Left Angle View

Right Angle View

Bottom View

Features

AMD/Xilinx ZU+ MPSoC ZU1CG
- Dual A53 APU and Dual R5 RPU
- 256KB On-chip Memory
- 81,900 FPGA Logic Cells
ISSI 1GB LPDDR4 with on-chip ECC
Boot from ISSI 256Mb QSPI or microSD card
PetaLinux environment available for download
Microchip 10/100/1000 Wired Ethernet PHY and MAC ID EEPROM
Microchip USB 2.0 PHY
Microchip USB-C input power control
Dialog GreenPAK™ on/off controller and power sequencer
TDK μPOL™ power modules
On-board JTAG and UART debug interface
ST Micro Temperature and Pressure Sensors
Battery-backed Real-Time Clock and FPGA Bitstream Security enabled with ECS and Custom Power
3 High Speed Expansions and 1 Click, enabled by Samtec connectors
User RGB and Monochrome LEDs
User Slide Switch and Push Button I/O

Target Applications

Artificial intelligence
Machine learning
Embedded Vision
Embedded processing
Robotics

Kit Includes

ZUBoard 1CG
Quick-start card
Free downloadable AMD-Xilinx Vitis and Vivado ML Standard Edition
Free downloadable PetaLinux BSP and reference designs

Technical Documents

Product Brief

Block Diagram

Tags: avnet, ZUBoard, ZUBoard_1CG

ZUBoard 1CG

e14-publisher — Thu, 02 Mar 2023 19:29:26 GMT

Revision 10 posted to Boards by e14-publisher on 3/2/2023 7:29:26 PM

Welcome to ZUBoard 1CG

Support Forum

Technical Specification

Click on the images to enlarge

Front View

Board & Charger

Left Angle View

Right Angle View

Features

AMD/Xilinx ZU+ MPSoC ZU1CG
- Dual A53 APU and Dual R5 RPU
- 256KB On-chip Memory
- 81,900 FPGA Logic Cells
ISSI 1GB LPDDR4 with on-chip ECC
Boot from ISSI 256Mb QSPI or microSD card
PetaLinux environment available for download
Microchip 10/100/1000 Wired Ethernet PHY and MAC ID EEPROM
Microchip USB 2.0 PHY
Microchip USB-C input power control
Dialog GreenPAK™ on/off controller and power sequencer
TDK μPOL™ power modules
On-board JTAG and UART debug interface
ST Micro Temperature and Pressure Sensors
Battery-backed Real-Time Clock and FPGA Bitstream Security enabled with ECS and Custom Power
3 High Speed Expansions and 1 Click, enabled by Samtec connectors
User RGB and Monochrome LEDs
User Slide Switch and Push Button I/O

Target Applications

Artificial intelligence
Machine learning
Embedded Vision
Embedded processing
Robotics

Kit Includes

ZUBoard 1CG
Quick-start card
Free downloadable AMD-Xilinx Vitis and Vivado ML Standard Edition
Free downloadable PetaLinux BSP and reference designs

Technical Documents

Product Brief

Block Diagram

Tags: avnet, ZUBoard, ZUBoard_1CG

ZUBoard 1CG

e14-publisher — Fri, 17 Feb 2023 22:00:15 GMT

Revision 9 posted to Boards by e14-publisher on 2/17/2023 10:00:15 PM

Welcome to ZUBoard 1CG

Support Forum

Technical Specification

Click on the images to enlarge

Front View

Board & Charger

Left Angle View

Right Angle View

Features

AMD/Xilinx ZU+ MPSoC ZU1CG
- Dual A53 APU and Dual R5 RPU
- 256KB On-chip Memory
- 81,900 FPGA Logic Cells
ISSI 1GB LPDDR4 with on-chip ECC
Boot from ISSI 256Mb QSPI or microSD card
PetaLinux environment available for download
Microchip 10/100/1000 Wired Ethernet PHY and MAC ID EEPROM
Microchip USB 2.0 PHY
Microchip USB-C input power control
Dialog GreenPAK™ on/off controller and power sequencer
TDK μPOL™ power modules
On-board JTAG and UART debug interface
ST Micro Temperature and Pressure Sensors
Battery-backed Real-Time Clock and FPGA Bitstream Security enabled with ECS and Custom Power
3 High Speed Expansions and 1 Click, enabled by Samtec connectors
User RGB and Monochrome LEDs
User Slide Switch and Push Button I/O

Target Applications

Artificial intelligence
Machine learning
Embedded Vision
Embedded processing
Robotics

Kit Includes

ZUBoard 1CG
Quick-start card
Free downloadable AMD-Xilinx Vitis and Vivado ML Standard Edition
Free downloadable PetaLinux BSP and reference designs

Technical Documents

Product Brief

Block Diagram

Tags: avnet, ZUBoard, ZUBoard_1CG

ZUBoard 1CG

dychen — Thu, 10 Nov 2022 10:16:40 GMT

Revision 8 posted to Boards by dychen on 11/10/2022 10:16:40 AM

Welcome to ZUBoard 1CG

Support Forum

Technical Specification

Microchip PHYs enable both 10/100/1000 Ethernet and USB 2.0 Host. A microUSB port provides on-board JTAG/UART access. Microchip oscillators and ECS crystals provide clocking to the ZU1 device, the on-chip real-time clock, JTAG, and communication interfaces. Power the board through USB-C with a Microchip controller and TDK μPOL ™ power modules. A combination of slide switches, push buttons, mono- and RGB-LEDs allow user interaction with the board. Both temperature and pressure sensors from ST Micro add environmental data to the system. Additionally, all four ZU+ PS GTR transceivers, 18 PS MIO, and 69 PL I/Os are exposed through Samtec expansion connectors with three SYZYGY ® and one Click Board ™ sites.

Click on the images to enlarge

Front View

Board & Charger

Left Angle View

Right Angle View

Features

AMD/Xilinx ZU+ MPSoC ZU1CG
- Dual A53 APU and Dual R5 RPU
- 256KB On-chip Memory
- 81,900 FPGA Logic Cells
ISSI 1GB LPDDR4 with on-chip ECC
Boot from ISSI 256Mb QSPI or microSD card
PetaLinux environment available for download
Microchip 10/100/1000 Wired Ethernet PHY and MAC ID EEPROM
Microchip USB 2.0 PHY
Microchip USB-C input power control
Dialog GreenPAK™ on/off controller and power sequencer
TDK μPOL™ power modules
On-board JTAG and UART debug interface
ST Micro Temperature and Pressure Sensors
Battery-backed Real-Time Clock and FPGA Bitstream Security enabled with ECS and Custom Power
Expansion with 3 SYZYGY and 1 Click, enabled by Samtec connectors
User RGB and Monochrome LEDs
User Slide Switch and Push Button I/O

Target Applications

Artificial intelligence
Machine learning
Embedded Vision
Embedded processing
Robotics

Kit Includes

ZUBoard 1CG
Quick-start card
Free downloadable AMD-Xilinx Vitis and Vivado ML Standard Edition
Free downloadable PetaLinux BSP and reference designs

Technical Documents

Product Brief

Block Diagram

Tags: avnet, ZUBoard, ZUBoard_1CG

ZUBoard 1CG

e14-publisher — Tue, 01 Nov 2022 21:57:11 GMT

Revision 7 posted to Boards by e14-publisher on 11/1/2022 9:57:11 PM

Welcome to ZUBoard 1CG

Support Forum

Technical Specification

Microchip PHYs enable both 10/100/1000 Ethernet and USB 2.0 Host. A microUSB port provides on-board JTAG/UART access. Microchip oscillators and ECS crystals provide clocking to the ZU1 device, the on-chip real-time clock, JTAG, and communication interfaces. Power the board through USB-C with a Microchip controller and TDK μPOL ™ power modules. A combination of slide switches, push buttons, mono- and RGB-LEDs allow user interaction with the board. Both temperature and pressure sensors from ST Micro add environmental data to the system. Additionally, all four ZU+ PS GTR transceivers, 18 PS MIO, and 69 PL I/Os are exposed through Samtec expansion connectors with three SYZYGY ® and one Click Board ™ sites.

Click on the images to enlarge

Front View

Board & Charger

Left Angle View

Right Angle View

Features

AMD/Xilinx ZU+ MPSoC ZU1CG
- Dual A53 APU and Dual R5 RPU
- 256KB On-chip Memory
- 81,900 FPGA Logic Cells
ISSI 1GB LPDDR4 with on-chip ECC
Boot from ISSI 256Mb QSPI or microSD card
PetaLinux environment available for download
Microchip 10/100/1000 Wired Ethernet PHY and MAC ID EEPROM
Microchip USB 2.0 PHY
Microchip USB-C input power control
Dialog GreenPAK™ on/off controller and power sequencer
TDK μPOL™ power modules
On-board JTAG and UART debug interface
ST Micro Temperature and Pressure Sensors
Battery-backed Real-Time Clock and FPGA Bitstream Security enabled with ECS and Custom Power
Expansion with 3 SYZYGY and 1 Click, enabled by Samtec connectors
User RGB and Monochrome LEDs
User Slide Switch and Push Button I/O

Target Applications

Artificial intelligence
Machine learning
Embedded Vision
Embedded processing
Robotics

Kit Includes

ZUBoard 1CG
Quick-start card
Free downloadable AMD-Xilinx Vitis and Vivado ML Standard Edition
Free downloadable PetaLinux BSP and reference designs

Technical Documents

Product Brief

Block Diagram

Tags: avnet, ZUBoard, ZUBoard_1CG

ZUBoard 1CG

e14-publisher — Thu, 27 Oct 2022 15:53:18 GMT

Revision 6 posted to Boards by e14-publisher on 10/27/2022 3:53:18 PM

Welcome to ZUBoard 1CG

Support Forum

Technical Specification

Microchip PHYs enable both 10/100/1000 Ethernet and USB 2.0 Host. A microUSB port provides on-board JTAG/UART access. Microchip oscillators and ECS crystals provide clocking to the ZU1 device, the on-chip real-time clock, JTAG, and communication interfaces. Power the board through USB-C with a Microchip controller and TDK μPOL ™ power modules. A combination of slide switches, push buttons, mono- and RGB-LEDs allow user interaction with the board. Both temperature and pressure sensors from ST Micro add environmental data to the system. Additionally, all four ZU+ PS GTR transceivers, 18 PS MIO, and 69 PL I/Os are exposed through Samtec expansion connectors with three SYZYGY ® and one Click Board ™ sites.

Click on the images to enlarge

Front View

Board & Charger

Left Angle View

Right Angle View

Features

AMD/Xilinx ZU+ MPSoC ZU1CG
- Dual A53 APU and Dual R5 RPU
- 256KB On-chip Memory
- 81,900 FPGA Logic Cells
ISSI 1GB LPDDR4 with on-chip ECC
Boot from ISSI 256Mb QSPI or microSD card
PetaLinux environment available for download
Microchip 10/100/1000 Wired Ethernet PHY and MAC ID EEPROM
Microchip USB 2.0 PHY
Microchip USB-C input power control
Dialog GreenPAK™ on/off controller and power sequencer
TDK μPOL™ power modules
On-board JTAG and UART debug interface
ST Micro Temperature and Pressure Sensors
Battery-backed Real-Time Clock and FPGA Bitstream Security enabled with ECS and Custom Power
Expansion with 3 SYZYGY and 1 Click, enabled by Samtec connectors
User RGB and Monochrome LEDs
User Slide Switch and Push Button I/O

Target Applications

Artificial intelligence
Machine learning
Embedded Vision
Embedded processing
Robotics

Kit Includes

ZUBoard 1CG
Quick-start card
Free downloadable AMD-Xilinx Vitis and Vivado ML Standard Edition
Free downloadable PetaLinux BSP and reference designs

Technical Documents

Product Brief

Block Diagram

Tags: avnet, ZUBoard, ZUBoard_1CG

ZUBoard 1CG

e14-publisher — Thu, 02 Jun 2022 16:42:50 GMT

Revision 5 posted to Boards by e14-publisher on 6/2/2022 4:42:50 PM

Welcome to ZUBoard 1CG

Support Forum

Technical Specification

Microchip PHYs enable both 10/100/1000 Ethernet and USB 2.0 Host. A microUSB port provides on-board JTAG/UART access. Microchip oscillators and ECS crystals provide clocking to the ZU1 device, the on-chip real-time clock, JTAG, and communication interfaces. Power the board through USB-C with a Microchip controller and TDK μPOL ™ power modules. A combination of slide switches, push buttons, mono- and RGB-LEDs allow user interaction with the board. Both temperature and pressure sensors from ST Micro add environmental data to the system. Additionally, all four ZU+ PS GTR transceivers, 18 PS MIO, and 69 PL I/Os are exposed through Samtec expansion connectors with three SYZYGY ® and one Click Board ™ sites.

Click on the images to enlarge

Front View

Board & Charger

Left Angle View

Right Angle View

Features

AMD/Xilinx ZU+ MPSoC ZU1CG
- Dual A53 APU and Dual R5 RPU
- 256KB On-chip Memory
- 81,900 FPGA Logic Cells
ISSI 1GB LPDDR4 with on-chip ECC
Boot from ISSI 256Mb QSPI or microSD card
PetaLinux environment available for download
Microchip 10/100/1000 Wired Ethernet PHY and MAC ID EEPROM
Microchip USB 2.0 PHY
Microchip USB-C input power control
Dialog GreenPAK™ on/off controller and power sequencer
TDK μPOL™ power modules
On-board JTAG and UART debug interface
ST Micro Temperature and Pressure Sensors
Battery-backed Real-Time Clock and FPGA Bitstream Security enabled with ECS and Custom Power
Expansion with 3 SYZYGY and 1 Click, enabled by Samtec connectors
User RGB and Monochrome LEDs
User Slide Switch and Push Button I/O

Target Applications

Artificial intelligence
Machine learning
Embedded Vision
Embedded processing
Robotics

Kit Includes

ZUBoard 1CG
Quick-start card
Free downloadable AMD-Xilinx Vitis and Vivado ML Standard Edition
Free downloadable PetaLinux BSP and reference designs

Technical Documents

Product Brief

Block Diagram

Tags: avnet, ZUBoard, ZUBoard_1CG

ZUBoard 1CG

e14-publisher — Wed, 01 Jun 2022 14:11:35 GMT

Revision 4 posted to Boards by e14-publisher on 6/1/2022 2:11:35 PM

Welcome to ZUBoard 1CG

Support Forum

Technical Specification

Microchip PHYs enable both 10/100/1000 Ethernet and USB 2.0 Host. A microUSB port provides on-board JTAG/UART access. Microchip oscillators and ECS crystals provide clocking to the ZU1 device, the on-chip real-time clock, JTAG, and communication interfaces. Power the board through USB-C with a Microchip controller and TDK μPOL ™ power modules. A combination of slide switches, push buttons, mono- and RGB-LEDs allow user interaction with the board. Both temperature and pressure sensors from ST Micro add environmental data to the system. Additionally, all four ZU+ PS GTR transceivers, 18 PS MIO, and 69 PL I/Os are exposed through Samtec expansion connectors with three SYZYGY ® and one Click Board ™ sites.

Click on the images to enlarge

Front View

Board & Charger

Left Angle View

Right Angle View

Features

AMD/Xilinx ZU+ MPSoC ZU1CG
- Dual A53 APU and Dual R5 RPU
- 256KB On-chip Memory
- 81,900 FPGA Logic Cells
ISSI 1GB LPDDR4 with on-chip ECC
Boot from ISSI 256Mb QSPI or microSD card
PetaLinux environment available for download
Microchip 10/100/1000 Wired Ethernet PHY and MAC ID EEPROM
Microchip USB 2.0 PHY
Microchip USB-C input power control
Dialog GreenPAK™ on/off controller and power sequencer
TDK μPOL™ power modules
On-board JTAG and UART debug interface
ST Micro Temperature and Pressure Sensors
Battery-backed Real-Time Clock and FPGA Bitstream Security enabled with ECS and Custom Power
Expansion with 3 SYZYGY and 1 Click, enabled by Samtec connectors
User RGB and Monochrome LEDs
User Slide Switch and Push Button I/O

Target Applications

Artificial intelligence
Machine learning
Embedded Vision
Embedded processing
Robotics

Kit Includes

ZUBoard 1CG
Quick-start card
Free downloadable AMD-Xilinx Vitis and Vivado ML Standard Edition
Free downloadable PetaLinux BSP and reference designs

Technical Documents

Product Brief

Block Diagram

Tags: avnet, ZUBoard, ZUBoard_1CG

ZUBoard 1CG

c_chil — Fri, 27 May 2022 19:20:17 GMT

Revision 3 posted to Boards by c_chil on 5/27/2022 7:20:17 PM

Welcome to ZUBoard 1CG

Technical Specification

Microchip PHYs enable both 10/100/1000 Ethernet and USB 2.0 Host. A microUSB port provides on-board JTAG/UART access. Microchip oscillators and ECS crystals provide clocking to the ZU1 device, the on-chip real-time clock, JTAG, and communication interfaces. Power the board through USB-C with a Microchip controller and TDK μPOL ™ power modules. A combination of slide switches, push buttons, mono- and RGB-LEDs allow user interaction with the board. Both temperature and pressure sensors from STMicroelectronics add environmental data to the system. Additionally, all four ZU+ PS GTR transceivers, 18 PS MIO, and 69 PL I/Os are exposed through Samtec expansion connectors with three SYZYGY ® and one Click Board ™ sites.

Click on the images to enlarge

Front View

Board & Charger

Left Angle View

Right Angle View

Features

AMD/Xilinx ZU+ MPSoC ZU1CG
- Dual A53 APU and Dual R5 RPU
- 256KB On-chip Memory
- 81,900 FPGA Logic Cells
ISSI 1GB LPDDR4 with on-chip ECC
Boot from ISSI 256Mb QSPI or microSD card
PetaLinux environment available for download
Microchip 10/100/1000 Wired Ethernet PHY and MAC ID EEPROM
Microchip USB 2.0 PHY
Microchip USB-C input power control
Dialog GreenPAK™ on/off controller and power sequencer
TDK μPOL™ power modules
On-board JTAG and UART debug interface
STMicroelectronics Temperature and Pressure Sensors
Battery-backed Real-Time Clock and FPGA Bitstream Security enabled with ECS and Custom Power
Expansion with 3 SYZYGY and 1 Click, enabled by Samtec connectors
User RGB and Monochrome LEDs
User Slide Switch and Push Button I/O

Target Applications

Artificial intelligence
Machine learning
Embedded Vision
Embedded processing
Robotics

Kit Includes

ZUBoard 1CG
Quick-start card
Free downloadable AMD-Xilinx Vitis and Vivado ML Standard Edition
Free downloadable PetaLinux BSP and reference designs

Technical Documents

Product Brief

Block Diagram

Tags: avnet, ZUBoard, ZUBoard_1CG

ZUBoard 1CG

e14-publisher — Fri, 27 May 2022 16:32:51 GMT

Revision 2 posted to Boards by e14-publisher on 5/27/2022 4:32:51 PM

Welcome to ZUBoard 1CG

Technical Specification

Microchip PHYs enable both 10/100/1000 Ethernet and USB 2.0 Host. A microUSB port provides on-board JTAG/UART access. Microchip oscillators and ECS crystals provide clocking to the ZU1 device, the on-chip real-time clock, JTAG, and communication interfaces. Power the board through USB-C with a Microchip controller and TDK μPOL ™ power modules. A combination of slide switches, push buttons, mono- and RGB-LEDs allow user interaction with the board. Both temperature and pressure sensors from ST Micro add environmental data to the system. Additionally, all four ZU+ PS GTR transceivers, 18 PS MIO, and 69 PL I/Os are exposed through Samtec expansion connectors with three SYZYGY ® and one Click Board ™ sites.

Click on the images to enlarge

Front View

Board & Charger

Left Angle View

Right Angle View

Features

AMD/Xilinx ZU+ MPSoC ZU1CG
- Dual A53 APU and Dual R5 RPU
- 256KB On-chip Memory
- 81,900 FPGA Logic Cells
ISSI 1GB LPDDR4 with on-chip ECC
Boot from ISSI 256Mb QSPI or microSD card
PetaLinux environment available for download
Microchip 10/100/1000 Wired Ethernet PHY and MAC ID EEPROM
Microchip USB 2.0 PHY
Microchip USB-C input power control
Dialog GreenPAK™ on/off controller and power sequencer
TDK μPOL™ power modules
On-board JTAG and UART debug interface
ST Micro Temperature and Pressure Sensors
Battery-backed Real-Time Clock and FPGA Bitstream Security enabled with ECS and Custom Power
Expansion with 3 SYZYGY and 1 Click, enabled by Samtec connectors
User RGB and Monochrome LEDs
User Slide Switch and Push Button I/O

Target Applications

Artificial intelligence
Machine learning
Embedded Vision
Embedded processing
Robotics

Kit Includes

ZUBoard 1CG
Quick-start card
Free downloadable AMD-Xilinx Vitis and Vivado ML Standard Edition
Free downloadable PetaLinux BSP and reference designs

Technical Documents

Product Brief

Block Diagram

Tags: avnet, ZUBoard, ZUBoard_1CG

ZUBoard 1CG

e14-publisher — Fri, 27 May 2022 14:59:51 GMT

Revision 1 posted to Boards by e14-publisher on 5/27/2022 2:59:51 PM

Welcome to ZUBoard 1CG

Technical Specification

Microchip PHYs enable both 10/100/1000 Ethernet and USB 2.0 Host. A microUSB port provides on-board JTAG/UART access. Microchip oscillators and ECS crystals provide clocking to the ZU1 device, the on-chip real-time clock, JTAG, and communication interfaces. Power the board through USB-C with a Microchip controller and TDK μPOL ™ power modules. A combination of slide switches, push buttons, mono- and RGB-LEDs allow user interaction with the board. Both temperature and pressure sensors from ST Micro add environmental data to the system. Additionally, all four ZU+ PS GTR transceivers, 18 PS MIO, and 69 PL I/Os are exposed through Samtec expansion connectors with three SYZYGY ® and one Click Board ™ sites.

Click on the images to enlarge

Front View

Board & Charger

Left Angle View

Right Angle View

Features

AMD/Xilinx ZU+ MPSoC ZU1CG
- Dual A53 APU and Dual R5 RPU
- 256KB On-chip Memory
- 81,900 FPGA Logic Cells
ISSI 1GB LPDDR4 with on-chip ECC
Boot from ISSI 256Mb QSPI or microSD card
PetaLinux environment available for download
Microchip 10/100/1000 Wired Ethernet PHY and MAC ID EEPROM
Microchip USB 2.0 PHY
Microchip USB-C input power control
Dialog GreenPAK™ on/off controller and power sequencer
TDK μPOL™ power modules
On-board JTAG and UART debug interface
ST Micro Temperature and Pressure Sensors
Battery-backed Real-Time Clock and FPGA Bitstream Security enabled with ECS and Custom Power
Expansion with 3 SYZYGY and 1 Click, enabled by Samtec connectors
User RGB and Monochrome LEDs
User Slide Switch and Push Button I/O

Target Applications

Artificial intelligence
Machine learning
Embedded Vision
Embedded processing
Robotics