MaaXBoard 8ULP

cstanton — Fri, 20 Dec 2024 15:41:43 GMT

Current Revision posted to Boards by cstanton on 12/20/2024 3:41:43 PM

Welcome to MaaXBoard 8ULP

MaaXBoard 8ULP features the NXP i.MX 8ULP processor to achieve ultra-low power, EdgeLock® secured intelligent edge applications.

To purchase the Starter Kit Click Here.
To purchase this board Click Here.

Support Forum

Technical Specification

The i.MX 8ULP device is architected with 3 separate processing domains: The application domain includes two Arm® Cortex®-A35 (800 MHz) cores plus 3D/2D GPUs for GUI-enabled Linux applications. The Real Time domain includes an Arm Cortex-M33 (216 MHz) core, plus Fusion DSP (200 MHz) core for low-power audio/voice use cases. Product Brief (Datasheet)

The LPAV domain (Low Power Audio Video) has a HiFi 4 DSP (475 MHz) core to support advanced audio, ML and sensor applications. The S400 Security Enclave and Power Manager also utilize RISC-V cores.

The 8ULP processor has on-chip shared RAM (768 KB), while the board is well resourced with power-efficient 32bit wide LPDDR4X DDR (2GB), Octal PSRAM (8 MB), plus eMMC 5.1 flash (32 GB) and Octal SPI NOR flash (4 MB) memory devices.

Audio applications are supported via onboard audio codec, digital microphone and stereo headphone jack I/O. Power is sourced via a USB-C connector and is managed via NXP's PCA9460B PMIC on the SOM plus three additional voltage regulators.

MaaXBoard 8ULP is engineered as two PCBs, a small SOM (43mm x 36mm) connected via 2x100-pin connectors to a baseboard (BB) in compact Raspberry Pi form-factor, which supports a versatile set of I/O interfaces. These include 10/100 Ethernet (with IEEE1588 support), two USB 2.0 host interfaces and a USB 2.0 device interface, MIPI DSI display and MIPI CSI camera interfaces, a Pi-HAT compatible 40-pin header, MikroE Click 16-pin header plus ADC/DAC 6-pin header.

A unique aspect of this board is it’s debug subsystem which supports remote USB access to three UARTs, 16bit I/O expander-based remote control and monitoring, plus integrated SWD/JTAG (or external header) debugger interface.

The back of the board has an M.2 module connector for easy addition of 801.11ac Wi-Fi and Bluetooth 5.1 wireless connectivity.

Click on the images to enlarge

Left Angle View

Right Angle View

Bottom View

Left Bottom View

Top View SOM

Front View SOM

SOM Dimensions

Left Angle SOM

Features

NXP i.MX 8ULP Processor
- 2x Arm Cortex A35 (800 MHz)
- 1x Arm Cortex M33 (216 MHz)
- 1x HiFi 4 DSP (475 MHz)
- 1x Fusion DSP (200 MHz)
- 1x 3D/2D-GPU (317 MHz)
Memory
- 768 KB shared RAM (8ULP on-chip)
- 2 GB LPDDR4X (32-bit)
- 32 GB eMMC memory
- 8 MB Octal SPI PSRAM
- 4 MB Octal SPI NOR Flash
Communications and User Interfaces
- 1G Ethernet port (RJ45)
- 801.11ac Wi-Fi and BT5 (optional)
- U.FL External Antenna (optional)
- 2x USB 2.0 Host and 1x USB 2.0 Device
- MIPI DSI LCD interface
- MIPI-CSI Camera Interface
- Audio Codec, DMIC and Stereo Jack I/O
- 1x User RGB LED and 3x Button Switches
Expansion, Power, Mechanical
- 40-pin Pi-HAT expansion header
- 16-pin MikroE Click Shuttle header
- 6-pin WTB Header (ADC in, DAC out)
- 10-pin JTAG/SWD debugger header
- USB-Type C connector 5V power input
- Operating Temperature: 0~70°C
- 85mm x 56mm form factor

Target Applications

Edge-AI Applications
Machine Learning
Secure Entry Access-Control Systems
Inventory and Asset Monitoring
- MaaXBoard 8ULP Single Board Computer
- Quick Start Instruction Card

Kit Includes

MaaXBoard 8ULP Single Board Computer
Quick Start Instruction Card

Technical Documents

Product Brief/Fact Sheet

Product Brief Starter Kit

Product Brief SOM

Block Diagram

Tags: avnet, maaxboard, MaaXBoard_8ULP

MaaXBoard 8ULP

e14-publisher — Wed, 13 Mar 2024 16:20:25 GMT

Revision 29 posted to Boards by e14-publisher on 3/13/2024 4:20:25 PM

Welcome to MaaXBoard 8ULP

MaaXBoard 8ULP features the NXP i.MX 8ULP processor to achieve ultra-low power, EdgeLock® secured intelligent edge applications.

To purchase the Starter Kit Click Here.
To purchase this board Click Here.

Support Forum

Technical Specification

The LPAV domain (Low Power Audio Video) has a HiFi 4 DSP (475 MHz) core to support advanced audio, ML and sensor applications. The S400 Security Enclave and Power Manager also utilize RISC-V cores.

The back of the board has an M.2 module connector for easy addition of 801.11ac Wi-Fi and Bluetooth 5.1 wireless connectivity.

Click on the images to enlarge

Left Angle View

Right Angle View

Bottom View

Left Bottom View

Top View SOM

Front View SOM

SOM Dimensions

Left Angle SOM

Features

NXP i.MX 8ULP Processor
- 2x Arm Cortex A35 (800 MHz)
- 1x Arm Cortex M33 (216 MHz)
- 1x HiFi 4 DSP (475 MHz)
- 1x Fusion DSP (200 MHz)
- 1x 3D/2D-GPU (317 MHz)
Memory
- 768 KB shared RAM (8ULP on-chip)
- 2 GB LPDDR4X (32-bit)
- 32 GB eMMC memory
- 8 MB Octal SPI PSRAM
- 4 MB Octal SPI NOR Flash
Communications and User Interfaces
- 1G Ethernet port (RJ45)
- 801.11ac Wi-Fi and BT5 (optional)
- U.FL External Antenna (optional)
- 2x USB 2.0 Host and 1x USB 2.0 Device
- MIPI DSI LCD interface
- MIPI-CSI Camera Interface
- Audio Codec, DMIC and Stereo Jack I/O
- 1x User RGB LED and 3x Button Switches
Expansion, Power, Mechanical
- 40-pin Pi-HAT expansion header
- 16-pin MikroE Click Shuttle header
- 6-pin WTB Header (ADC in, DAC out)
- 10-pin JTAG/SWD debugger header
- USB-Type C connector 5V power input
- Operating Temperature: 0~70°C
- 85mm x 56mm form factor

Target Applications

Edge-AI Applications
Machine Learning
Secure Entry Access-Control Systems
Inventory and Asset Monitoring
- MaaXBoard 8ULP Single Board Computer
- Quick Start Instruction Card

Kit Includes

MaaXBoard 8ULP Single Board Computer
Quick Start Instruction Card

Technical Documents

Product Brief/Fact Sheet

Product Brief Starter Kit

Product Brief SOM

Block Diagram

Tags: avnet, maaxboard, MaaXBoard_8ULP

MaaXBoard 8ULP

e14-publisher — Thu, 22 Feb 2024 22:19:04 GMT

Revision 28 posted to Boards by e14-publisher on 2/22/2024 10:19:04 PM

Welcome to MaaXBoard 8ULP

MaaXBoard 8ULP features the NXP i.MX 8ULP processor to achieve ultra-low power, EdgeLock® secured intelligent edge applications.

To purchase the Starter Kit Click Here.
To purchase this board Click Here.

Support Forum

Technical Specification

The LPAV domain (Low Power Audio Video) has a HiFi 4 DSP (475 MHz) core to support advanced audio, ML and sensor applications. The S400 Security Enclave and Power Manager also utilize RISC-V cores.

The back of the board has an M.2 module connector for easy addition of 801.11ac Wi-Fi and Bluetooth 5.1 wireless connectivity.

Click on the images to enlarge

Left Angle View

Right Angle View

Bottom View

Left Bottom View

Top View SOM

Front View SOM

SOM Dimensions

Left Angle SOM

Features

NXP i.MX 8ULP Processor
- 2x Arm Cortex A35 (800 MHz)
- 1x Arm Cortex M33 (216 MHz)
- 1x HiFi 4 DSP (475 MHz)
- 1x Fusion DSP (200 MHz)
- 1x 3D/2D-GPU (317 MHz)
Memory
- 768 KB shared RAM (8ULP on-chip)
- 2 GB LPDDR4X (32-bit)
- 32 GB eMMC memory
- 8 MB Octal SPI PSRAM
- 4 MB Octal SPI NOR Flash
Communications and User Interfaces
- 1G Ethernet port (RJ45)
- 801.11ac Wi-Fi and BT5 (optional)
- U.FL External Antenna (optional)
- 2x USB 2.0 Host and 1x USB 2.0 Device
- MIPI DSI LCD interface
- MIPI-CSI Camera Interface
- Audio Codec, DMIC and Stereo Jack I/O
- 1x User RGB LED and 3x Button Switches
Expansion, Power, Mechanical
- 40-pin Pi-HAT expansion header
- 16-pin MikroE Click Shuttle header
- 6-pin WTB Header (ADC in, DAC out)
- 10-pin JTAG/SWD debugger header
- USB-Type C connector 5V power input
- Operating Temperature: 0~70°C
- 85mm x 56mm form factor

Target Applications

Edge-AI Applications
Machine Learning
Secure Entry Access-Control Systems
Inventory and Asset Monitoring
- MaaXBoard 8ULP Single Board Computer
- Quick Start Instruction Card

Kit Includes

MaaXBoard 8ULP Single Board Computer
Quick Start Instruction Card

Technical Documents

Product Brief/Fact Sheet

Product Brief Starter Kit

Product Brief SOM

Block Diagram

Tags: avnet, maaxboard, MaaXBoard_8ULP

MaaXBoard 8ULP

e14-publisher — Thu, 22 Feb 2024 19:53:56 GMT

Revision 27 posted to Boards by e14-publisher on 2/22/2024 7:53:56 PM

Welcome to MaaXBoard 8ULP

MaaXBoard 8ULP features the NXP i.MX 8ULP processor to achieve ultra-low power, EdgeLock® secured intelligent edge applications.

To purchase the Starter Kit Click Here.
To purchase this board Click Here.

Support Forum

Technical Specification

The LPAV domain (Low Power Audio Video) has a HiFi 4 DSP (475 MHz) core to support advanced audio, ML and sensor applications. The S400 Security Enclave and Power Manager also utilize RISC-V cores.

MaaXBoard 8ULP is engineered as two PCBs, a small SOM (43mm x 36mm) connected via 2x100-pin connectors to a baseboard (BB) in compact Raspberry Pi form-factor, which supports a versatile set of I/O interfaces. These include 10/100 Ethernet (with IEE1588 support), two USB 2.0 host interfaces and a USB 2.0 device interface, MIPI DSI display and MIPI CSI camera interfaces, a Pi-HAT compatible 40-pin header, MikroE Click 16-pin header plus ADC/DAC 6-pin header.

The back of the board has an M.2 module connector for easy addition of 801.11ac Wi-Fi and Bluetooth 5.1 wireless connectivity.

Click on the images to enlarge

Left Angle View

Right Angle View

Bottom View

Left Bottom View

Top View SOM

Front View SOM

SOM Dimensions

Left Angle SOM

Features

NXP i.MX 8ULP Processor
- 2x Arm Cortex A35 (800 MHz)
- 1x Arm Cortex M33 (216 MHz)
- 1x HiFi 4 DSP (475 MHz)
- 1x Fusion DSP (200 MHz)
- 1x 3D/2D-GPU (317 MHz)
Memory
- 768 KB shared RAM (8ULP on-chip)
- 2 GB LPDDR4X (32-bit)
- 32 GB eMMC memory
- 8 MB Octal SPI PSRAM
- 4 MB Octal SPI NOR Flash
Communications and User Interfaces
- 1G Ethernet port (RJ45)
- 801.11ac Wi-Fi and BT5 (optional)
- U.FL External Antenna (optional)
- 2x USB 2.0 Host and 1x USB 2.0 Device
- MIPI DSI LCD interface
- MIPI-CSI Camera Interface
- Audio Codec, DMIC and Stereo Jack I/O
- 1x User RGB LED and 3x Button Switches
Expansion, Power, Mechanical
- 40-pin Pi-HAT expansion header
- 16-pin MikroE Click Shuttle header
- 6-pin WTB Header (ADC in, DAC out)
- 10-pin JTAG/SWD debugger header
- USB-Type C connector 5V power input
- Operating Temperature: 0~70°C
- 85mm x 56mm form factor

Target Applications

Edge-AI Applications
Machine Learning
Secure Entry Access-Control Systems
Inventory and Asset Monitoring
- MaaXBoard 8ULP Single Board Computer
- Quick Start Instruction Card

Kit Includes

MaaXBoard 8ULP Single Board Computer
Quick Start Instruction Card

Technical Documents

Product Brief/Fact Sheet

Product Brief Starter Kit

Product Brief SOM

Block Diagram

Tags: avnet, maaxboard, MaaXBoard_8ULP

MaaXBoard 8ULP

e14-publisher — Thu, 22 Feb 2024 19:53:15 GMT

Revision 26 posted to Boards by e14-publisher on 2/22/2024 7:53:15 PM

Welcome to MaaXBoard 8ULP

MaaXBoard 8ULP features the NXP i.MX 8ULP processor to achieve ultra-low power, EdgeLock® secured intelligent edge applications.

To purchase the Starter Kit Click Here.
To purchase this board Click Here.

Support Forum

Technical Specification

The LPAV domain (Low Power Audio Video) has a HiFi 4 DSP (475 MHz) core to support advanced audio, ML and sensor applications. The S400 Security Enclave and Power Manager also utilize RISC-V cores. < Product Brief (Datasheet) /p>

MaaXBoard 8ULP is engineered as two PCBs, a small SOM (43mm x 36mm) connected via 2x100-pin connectors to a baseboard (BB) in compact Raspberry Pi form-factor, which supports a versatile set of I/O interfaces. These include 10/100 Ethernet (with IEE1588 support), two USB 2.0 host interfaces and a USB 2.0 device interface, MIPI DSI display and MIPI CSI camera interfaces, a Pi-HAT compatible 40-pin header, MikroE Click 16-pin header plus ADC/DAC 6-pin header.

The back of the board has an M.2 module connector for easy addition of 801.11ac Wi-Fi and Bluetooth 5.1 wireless connectivity.

Click on the images to enlarge

Left Angle View

Right Angle View

Bottom View

Left Bottom View

Top View SOM

Front View SOM

SOM Dimensions

Left Angle SOM

Features

NXP i.MX 8ULP Processor
- 2x Arm Cortex A35 (800 MHz)
- 1x Arm Cortex M33 (216 MHz)
- 1x HiFi 4 DSP (475 MHz)
- 1x Fusion DSP (200 MHz)
- 1x 3D/2D-GPU (317 MHz)
Memory
- 768 KB shared RAM (8ULP on-chip)
- 2 GB LPDDR4X (32-bit)
- 32 GB eMMC memory
- 8 MB Octal SPI PSRAM
- 4 MB Octal SPI NOR Flash
Communications and User Interfaces
- 1G Ethernet port (RJ45)
- 801.11ac Wi-Fi and BT5 (optional)
- U.FL External Antenna (optional)
- 2x USB 2.0 Host and 1x USB 2.0 Device
- MIPI DSI LCD interface
- MIPI-CSI Camera Interface
- Audio Codec, DMIC and Stereo Jack I/O
- 1x User RGB LED and 3x Button Switches
Expansion, Power, Mechanical
- 40-pin Pi-HAT expansion header
- 16-pin MikroE Click Shuttle header
- 6-pin WTB Header (ADC in, DAC out)
- 10-pin JTAG/SWD debugger header
- USB-Type C connector 5V power input
- Operating Temperature: 0~70°C
- 85mm x 56mm form factor

Target Applications

Edge-AI Applications
Machine Learning
Secure Entry Access-Control Systems
Inventory and Asset Monitoring
- MaaXBoard 8ULP Single Board Computer
- Quick Start Instruction Card

Kit Includes

MaaXBoard 8ULP Single Board Computer
Quick Start Instruction Card

Technical Documents

Product Brief/Fact Sheet

Product Brief Starter Kit

Product Brief SOM

Block Diagram

Tags: avnet, maaxboard, MaaXBoard_8ULP

MaaXBoard 8ULP

e14-publisher — Thu, 22 Feb 2024 14:50:44 GMT

Revision 25 posted to Boards by e14-publisher on 2/22/2024 2:50:44 PM

Welcome to MaaXBoard 8ULP

MaaXBoard 8ULP features the NXP i.MX 8ULP processor to achieve ultra-low power, EdgeLock® secured intelligent edge applications.

To purchase the Starter Kit Click Here.
To purchase this board Click Here.

Support Forum

Technical Specification

MaaXBoard 8ULP features the NXP i.MX 8ULP processor to achieve ultra-low power, EdgeLock® secured intelligent edge applications. Product Brief (Datasheet)

The LPAV domain (Low Power Audio Video) has a HiFi 4 DSP (475 MHz) core to support advanced audio, ML and sensor applications. The S400 Security Enclave and Power Manager also utilize RISC-V cores.

MaaXBoard 8ULP is engineered as two PCBs, a small SOM (43mm x 36mm) connected via 2x100-pin connectors to a baseboard (BB) in compact Raspberry Pi form-factor, which supports a versatile set of I/O interfaces. These include 10/100 Ethernet (with IEE1588 support), two USB 2.0 host interfaces and a USB 2.0 device interface, MIPI DSI display and MIPI CSI camera interfaces, a Pi-HAT compatible 40-pin header, MikroE Click 16-pin header plus ADC/DAC 6-pin header.

The back of the board has an M.2 module connector for easy addition of 801.11ac Wi-Fi and Bluetooth 5.1 wireless connectivity.

Click on the images to enlarge

Left Angle View

Right Angle View

Bottom View

Left Bottom View

Top View SOM

Front View SOM

SOM Dimensions

Left Angle SOM

Features

NXP i.MX 8ULP Processor
- 2x Arm Cortex A35 (800 MHz)
- 1x Arm Cortex M33 (216 MHz)
- 1x HiFi 4 DSP (475 MHz)
- 1x Fusion DSP (200 MHz)
- 1x 3D/2D-GPU (317 MHz)
Memory
- 768 KB shared RAM (8ULP on-chip)
- 2 GB LPDDR4X (32-bit)
- 32 GB eMMC memory
- 8 MB Octal SPI PSRAM
- 4 MB Octal SPI NOR Flash
Communications and User Interfaces
- 1G Ethernet port (RJ45)
- 801.11ac Wi-Fi and BT5 (optional)
- U.FL External Antenna (optional)
- 2x USB 2.0 Host and 1x USB 2.0 Device
- MIPI DSI LCD interface
- MIPI-CSI Camera Interface
- Audio Codec, DMIC and Stereo Jack I/O
- 1x User RGB LED and 3x Button Switches
Expansion, Power, Mechanical
- 40-pin Pi-HAT expansion header
- 16-pin MikroE Click Shuttle header
- 6-pin WTB Header (ADC in, DAC out)
- 10-pin JTAG/SWD debugger header
- USB-Type C connector 5V power input
- Operating Temperature: 0~70°C
- 85mm x 56mm form factor

Target Applications

Edge-AI Applications
Machine Learning
Secure Entry Access-Control Systems
Inventory and Asset Monitoring
- MaaXBoard 8ULP Single Board Computer
- Quick Start Instruction Card

Kit Includes

MaaXBoard 8ULP Single Board Computer
Quick Start Instruction Card

Technical Documents

Product Brief/Fact Sheet

Product Brief Starter Kit

Product Brief SOM

Block Diagram

Tags: avnet, maaxboard, MaaXBoard_8ULP

MaaXBoard 8ULP

e14-publisher — Mon, 29 Jan 2024 22:27:24 GMT

Revision 24 posted to Boards by e14-publisher on 1/29/2024 10:27:24 PM

Welcome to MaaXBoard 8ULP

MaaXBoard 8ULP features the NXP i.MX 8ULP processor to achieve ultra-low power, EdgeLock® secured intelligent edge applications.

To purchase the Starter Kit Click Here.
To purchase this board Click Here.

Support Forum

Technical Specification

The LPAV domain (Low Power Audio Video) has a HiFi 4 DSP (475 MHz) core to support advanced audio, ML and sensor applications. The S400 Security Enclave and Power Manager also utilize RISC-V cores.

MaaXBoard 8ULP is engineered as two PCBs, a small SOM (43mm x 36mm) connected via 2x100-pin connectors to a baseboard (BB) in compact Raspberry Pi form-factor, which supports a versatile set of I/O interfaces. These include Gigabit Ethernet, two USB 2.0 host interfaces, plus separate USB 2.0 device interface, MIPI DSI display and MIPI CSI camera interfaces, a Pi-HAT compatible 40-pin header, MikroE Click 16-pin header plus ADC/DAC 6-pin header.

The back of the board has an M.2 module connector for easy addition of 801.11ac Wi-Fi and Bluetooth 5.1 wireless connectivity.

Click on the images to enlarge

Left Angle View

Right Angle View

Bottom View

Left Bottom View

Top View SOM

Front View SOM

SOM Dimensions

Left Angle SOM

Features

NXP i.MX 8ULP Processor
- 2x Arm Cortex A35 (800 MHz)
- 1x Arm Cortex M33 (216 MHz)
- 1x HiFi 4 DSP (475 MHz)
- 1x Fusion DSP (200 MHz)
- 1x 3D/2D-GPU (317 MHz)
Memory
- 768 KB shared RAM (8ULP on-chip)
- 2 GB LPDDR4X (32-bit)
- 32 GB eMMC memory
- 8 MB Octal SPI PSRAM
- 4 MB Octal SPI NOR Flash
Communications and User Interfaces
- 1G Ethernet port (RJ45)
- 801.11ac Wi-Fi and BT5 (optional)
- U.FL External Antenna (optional)
- 2x USB 2.0 Host and 1x USB 2.0 Device
- MIPI DSI LCD interface
- MIPI-CSI Camera Interface
- Audio Codec, DMIC and Stereo Jack I/O
- 1x User RGB LED and 3x Button Switches
Expansion, Power, Mechanical
- 40-pin Pi-HAT expansion header
- 16-pin MikroE Click Shuttle header
- 6-pin WTB Header (ADC in, DAC out)
- 10-pin JTAG/SWD debugger header
- USB-Type C connector 5V power input
- Operating Temperature: 0~70°C
- 85mm x 56mm form factor

Target Applications

Edge-AI Applications
Machine Learning
Secure Entry Access-Control Systems
Inventory and Asset Monitoring
- MaaXBoard 8ULP Single Board Computer
- Quick Start Instruction Card

Kit Includes

MaaXBoard 8ULP Single Board Computer
Quick Start Instruction Card

Technical Documents

Product Brief/Fact Sheet

Product Brief Starter Kit

Product Brief SOM

Block Diagram

Tags: avnet, maaxboard, MaaXBoard_8ULP

MaaXBoard 8ULP

e14-publisher — Mon, 29 Jan 2024 22:18:14 GMT

Revision 23 posted to Boards by e14-publisher on 1/29/2024 10:18:14 PM

Welcome to MaaXBoard 8ULP

MaaXBoard 8ULP features the NXP i.MX 8ULP processor to achieve ultra-low power, EdgeLock® secured intelligent edge applications.

To purchase the Starter Kit Click Here.
To purchase this board Click Here.

Support Forum

Technical Specification

The LPAV domain (Low Power Audio Video) has a HiFi 4 DSP (475 MHz) core to support advanced audio, ML and sensor applications. The S400 Security Enclave and Power Manager also utilize RISC-V cores.

MaaXBoard 8ULP is engineered as two PCBs, a small SOM (43mm x 36mm) connected via 2x100-pin connectors to a baseboard (BB) in compact Raspberry Pi form-factor, which supports a versatile set of I/O interfaces. These include Gigabit Ethernet, two USB 2.0 host interfaces, plus separate USB 2.0 device interface, MIPI DSI display and MIPI CSI camera interfaces, a Pi-HAT compatible 40-pin header, MikroE Click 16-pin header plus ADC/DAC 6-pin header.

The back of the board has an M.2 module connector for easy addition of 801.11ac Wi-Fi and Bluetooth 5.1 wireless connectivity.

Click on the images to enlarge

Left Angle View

Right Angle View

Bottom View

Left Bottom View

Top View SOM

Front View SOM

SOM Dimensions

Left Angle View SOM

Features

NXP i.MX 8ULP Processor
- 2x Arm Cortex A35 (800 MHz)
- 1x Arm Cortex M33 (216 MHz)
- 1x HiFi 4 DSP (475 MHz)
- 1x Fusion DSP (200 MHz)
- 1x 3D/2D-GPU (317 MHz)
Memory
- 768 KB shared RAM (8ULP on-chip)
- 2 GB LPDDR4X (32-bit)
- 32 GB eMMC memory
- 8 MB Octal SPI PSRAM
- 4 MB Octal SPI NOR Flash
Communications and User Interfaces
- 1G Ethernet port (RJ45)
- 801.11ac Wi-Fi and BT5 (optional)
- U.FL External Antenna (optional)
- 2x USB 2.0 Host and 1x USB 2.0 Device
- MIPI DSI LCD interface
- MIPI-CSI Camera Interface
- Audio Codec, DMIC and Stereo Jack I/O
- 1x User RGB LED and 3x Button Switches
Expansion, Power, Mechanical
- 40-pin Pi-HAT expansion header
- 16-pin MikroE Click Shuttle header
- 6-pin WTB Header (ADC in, DAC out)
- 10-pin JTAG/SWD debugger header
- USB-Type C connector 5V power input
- Operating Temperature: 0~70°C
- 85mm x 56mm form factor

Target Applications

Edge-AI Applications
Machine Learning
Secure Entry Access-Control Systems
Inventory and Asset Monitoring
- MaaXBoard 8ULP Single Board Computer
- Quick Start Instruction Card

Kit Includes

MaaXBoard 8ULP Single Board Computer
Quick Start Instruction Card

Technical Documents

Product Brief/Fact Sheet

Product Brief Starter Kit

Product Brief SOM

Block Diagram

Tags: avnet, maaxboard, MaaXBoard_8ULP

MaaXBoard 8ULP

e14-publisher — Mon, 29 Jan 2024 17:41:17 GMT

Revision 22 posted to Boards by e14-publisher on 1/29/2024 5:41:17 PM

Welcome to MaaXBoard 8ULP

MaaXBoard 8ULP features the NXP i.MX 8ULP processor to achieve ultra-low power, EdgeLock® secured intelligent edge applications.

To purchase the Starter Kit Click Here.

To purchase this board Click Here.

Support Forum

Technical Specification

The LPAV domain (Low Power Audio Video) has a HiFi 4 DSP (475 MHz) core to support advanced audio, ML and sensor applications. The S400 Security Enclave and Power Manager also utilize RISC-V cores.

MaaXBoard 8ULP is engineered as two PCBs, a small SOM (43mm x 36mm) connected via 2x100-pin connectors to a baseboard (BB) in compact Raspberry Pi form-factor, which supports a versatile set of I/O interfaces. These include Gigabit Ethernet, two USB 2.0 host interfaces, plus separate USB 2.0 device interface, MIPI DSI display and MIPI CSI camera interfaces, a Pi-HAT compatible 40-pin header, MikroE Click 16-pin header plus ADC/DAC 6-pin header.

The back of the board has an M.2 module connector for easy addition of 801.11ac Wi-Fi and Bluetooth 5.1 wireless connectivity.

Click on the images to enlarge

Left Angle View

Right Angle View

Bottom View

Left Bottom View

Features

NXP i.MX 8ULP Processor
- 2x Arm Cortex A35 (800 MHz)
- 1x Arm Cortex M33 (216 MHz)
- 1x HiFi 4 DSP (475 MHz)
- 1x Fusion DSP (200 MHz)
- 1x 3D/2D-GPU (317 MHz)
Memory
- 768 KB shared RAM (8ULP on-chip)
- 2 GB LPDDR4X (32-bit)
- 32 GB eMMC memory
- 8 MB Octal SPI PSRAM
- 4 MB Octal SPI NOR Flash
Communications and User Interfaces
- 1G Ethernet port (RJ45)
- 801.11ac Wi-Fi and BT5 (optional)
- U.FL External Antenna (optional)
- 2x USB 2.0 Host and 1x USB 2.0 Device
- MIPI DSI LCD interface
- MIPI-CSI Camera Interface
- Audio Codec, DMIC and Stereo Jack I/O
- 1x User RGB LED and 3x Button Switches
Expansion, Power, Mechanical
- 40-pin Pi-HAT expansion header
- 16-pin MikroE Click Shuttle header
- 6-pin WTB Header (ADC in, DAC out)
- 10-pin JTAG/SWD debugger header
- USB-Type C connector 5V power input
- Operating Temperature: 0~70°C
- 85mm x 56mm form factor

Target Applications

Edge-AI Applications
Machine Learning
Secure Entry Access-Control Systems
Inventory and Asset Monitoring
- MaaXBoard 8ULP Single Board Computer
- Quick Start Instruction Card

Kit Includes

MaaXBoard 8ULP Single Board Computer
Quick Start Instruction Card

Technical Documents

Product Brief/Fact Sheet

Product Brief Starter Kit

Product Brief SOM

Block Diagram

Tags: avnet, maaxboard, MaaXBoard_8ULP

MaaXBoard 8ULP

e14-publisher — Mon, 29 Jan 2024 17:37:33 GMT

Revision 21 posted to Boards by e14-publisher on 1/29/2024 5:37:33 PM

Welcome to MaaXBoard 8ULP

MaaXBoard 8ULP features the NXP i.MX 8ULP processor to achieve ultra-low power, EdgeLock® secured intelligent edge applications.

To purchase the Starter Kit Click Here.

To purchase this board Click Here.

Support Forum

Technical Specification

The LPAV domain (Low Power Audio Video) has a HiFi 4 DSP (475 MHz) core to support advanced audio, ML and sensor applications. The S400 Security Enclave and Power Manager also utilize RISC-V cores.

MaaXBoard 8ULP is engineered as two PCBs, a small SOM (43mm x 36mm) connected via 2x100-pin connectors to a baseboard (BB) in compact Raspberry Pi form-factor, which supports a versatile set of I/O interfaces. These include Gigabit Ethernet, two USB 2.0 host interfaces, plus separate USB 2.0 device interface, MIPI DSI display and MIPI CSI camera interfaces, a Pi-HAT compatible 40-pin header, MikroE Click 16-pin header plus ADC/DAC 6-pin header.

The back of the board has an M.2 module connector for easy addition of 801.11ac Wi-Fi and Bluetooth 5.1 wireless connectivity.

Click on the images to enlarge

Left Angle View

Right Angle View

Bottom View

Left Bottom View

Features

NXP i.MX 8ULP Processor
- 2x Arm Cortex A35 (800 MHz)
- 1x Arm Cortex M33 (216 MHz)
- 1x HiFi 4 DSP (475 MHz)
- 1x Fusion DSP (200 MHz)
- 1x 3D/2D-GPU (317 MHz)
Memory
- 768 KB shared RAM (8ULP on-chip)
- 2 GB LPDDR4X (32-bit)
- 32 GB eMMC memory
- 8 MB Octal SPI PSRAM
- 4 MB Octal SPI NOR Flash
Communications and User Interfaces
- 1G Ethernet port (RJ45)
- 801.11ac Wi-Fi and BT5 (optional)
- U.FL External Antenna (optional)
- 2x USB 2.0 Host and 1x USB 2.0 Device
- MIPI DSI LCD interface
- MIPI-CSI Camera Interface
- Audio Codec, DMIC and Stereo Jack I/O
- 1x User RGB LED and 3x Button Switches
Expansion, Power, Mechanical
- 40-pin Pi-HAT expansion header
- 16-pin MikroE Click Shuttle header
- 6-pin WTB Header (ADC in, DAC out)
- 10-pin JTAG/SWD debugger header
- USB-Type C connector 5V power input
- Operating Temperature: 0~70°C
- 85mm x 56mm form factor

Target Applications

Edge-AI Applications
Machine Learning
Secure Entry Access-Control Systems
Inventory and Asset Monitoring
- MaaXBoard 8ULP Single Board Computer
- Quick Start Instruction Card

Kit Includes

MaaXBoard 8ULP Single Board Computer
Quick Start Instruction Card

Technical Documents

Product Brief/Fact Sheet

Product Brief

Block Diagram

Tags: avnet, maaxboard, MaaXBoard_8ULP

MaaXBoard 8ULP

e14-publisher — Mon, 29 Jan 2024 17:22:02 GMT

Revision 20 posted to Boards by e14-publisher on 1/29/2024 5:22:02 PM

Welcome to MaaXBoard 8ULP

MaaXBoard 8ULP features the NXP i.MX 8ULP processor to achieve ultra-low power, EdgeLock® secured intelligent edge applications.

To purchase the Starter Kit Click Here.

To purchase this board Click Here.

Support Forum

Technical Specification

The LPAV domain (Low Power Audio Video) has a HiFi 4 DSP (475 MHz) core to support advanced audio, ML and sensor applications. The S400 Security Enclave and Power Manager also utilize RISC-V cores.

MaaXBoard 8ULP is engineered as two PCBs, a small SOM (43mm x 36mm) connected via 2x100-pin connectors to a baseboard (BB) in compact Raspberry Pi form-factor, which supports a versatile set of I/O interfaces. These include Gigabit Ethernet, two USB 2.0 host interfaces, plus separate USB 2.0 device interface, MIPI DSI display and MIPI CSI camera interfaces, a Pi-HAT compatible 40-pin header, MikroE Click 16-pin header plus ADC/DAC 6-pin header.

The back of the board has an M.2 module connector for easy addition of 801.11ac Wi-Fi and Bluetooth 5.1 wireless connectivity.

Click on the images to enlarge

Left Angle View

Right Angle View

Bottom View

Left Bottom View

Features

NXP i.MX 8ULP Processor
- 2x Arm Cortex A35 (800 MHz)
- 1x Arm Cortex M33 (216 MHz)
- 1x HiFi 4 DSP (475 MHz)
- 1x Fusion DSP (200 MHz)
- 1x 3D/2D-GPU (317 MHz)
Memory
- 768 KB shared RAM (8ULP on-chip)
- 2 GB LPDDR4X (32-bit)
- 32 GB eMMC memory
- 8 MB Octal SPI PSRAM
- 4 MB Octal SPI NOR Flash
Communications and User Interfaces
- 1G Ethernet port (RJ45)
- 801.11ac Wi-Fi and BT5 (optional)
- U.FL External Antenna (optional)
- 2x USB 2.0 Host and 1x USB 2.0 Device
- MIPI DSI LCD interface
- MIPI-CSI Camera Interface
- Audio Codec, DMIC and Stereo Jack I/O
- 1x User RGB LED and 3x Button Switches
Expansion, Power, Mechanical
- 40-pin Pi-HAT expansion header
- 16-pin MikroE Click Shuttle header
- 6-pin WTB Header (ADC in, DAC out)
- 10-pin JTAG/SWD debugger header
- USB-Type C connector 5V power input
- Operating Temperature: 0~70°C
- 85mm x 56mm form factor

Target Applications

Edge-AI Applications
Machine Learning
Secure Entry Access-Control Systems
Inventory and Asset Monitoring
- MaaXBoard 8ULP Single Board Computer
- Quick Start Instruction Card

Kit Includes

MaaXBoard 8ULP Single Board Computer
Quick Start Instruction Card

Technical Documents

Product Brief/Fact Sheet

Product Brief

Block Diagram

Tags: avnet, maaxboard, MaaXBoard_8ULP

MaaXBoard 8ULP

e14-publisher — Mon, 29 Jan 2024 17:21:29 GMT

Revision 19 posted to Boards by e14-publisher on 1/29/2024 5:21:29 PM

Welcome to MaaXBoard 8ULP

MaaXBoard 8ULP features the NXP i.MX 8ULP processor to achieve ultra-low power, EdgeLock® secured intelligent edge applications.

To purchase the Starter Kit Click Here .

To purchase this board Click Here.

Support Forum

Technical Specification

The LPAV domain (Low Power Audio Video) has a HiFi 4 DSP (475 MHz) core to support advanced audio, ML and sensor applications. The S400 Security Enclave and Power Manager also utilize RISC-V cores.

MaaXBoard 8ULP is engineered as two PCBs, a small SOM (43mm x 36mm) connected via 2x100-pin connectors to a baseboard (BB) in compact Raspberry Pi form-factor, which supports a versatile set of I/O interfaces. These include Gigabit Ethernet, two USB 2.0 host interfaces, plus separate USB 2.0 device interface, MIPI DSI display and MIPI CSI camera interfaces, a Pi-HAT compatible 40-pin header, MikroE Click 16-pin header plus ADC/DAC 6-pin header.

The back of the board has an M.2 module connector for easy addition of 801.11ac Wi-Fi and Bluetooth 5.1 wireless connectivity.

Click on the images to enlarge

Left Angle View

Right Angle View

Bottom View

Left Bottom View

Features

NXP i.MX 8ULP Processor
- 2x Arm Cortex A35 (800 MHz)
- 1x Arm Cortex M33 (216 MHz)
- 1x HiFi 4 DSP (475 MHz)
- 1x Fusion DSP (200 MHz)
- 1x 3D/2D-GPU (317 MHz)
Memory
- 768 KB shared RAM (8ULP on-chip)
- 2 GB LPDDR4X (32-bit)
- 32 GB eMMC memory
- 8 MB Octal SPI PSRAM
- 4 MB Octal SPI NOR Flash
Communications and User Interfaces
- 1G Ethernet port (RJ45)
- 801.11ac Wi-Fi and BT5 (optional)
- U.FL External Antenna (optional)
- 2x USB 2.0 Host and 1x USB 2.0 Device
- MIPI DSI LCD interface
- MIPI-CSI Camera Interface
- Audio Codec, DMIC and Stereo Jack I/O
- 1x User RGB LED and 3x Button Switches
Expansion, Power, Mechanical
- 40-pin Pi-HAT expansion header
- 16-pin MikroE Click Shuttle header
- 6-pin WTB Header (ADC in, DAC out)
- 10-pin JTAG/SWD debugger header
- USB-Type C connector 5V power input
- Operating Temperature: 0~70°C
- 85mm x 56mm form factor

Target Applications

Edge-AI Applications
Machine Learning
Secure Entry Access-Control Systems
Inventory and Asset Monitoring
- MaaXBoard 8ULP Single Board Computer
- Quick Start Instruction Card

Kit Includes

MaaXBoard 8ULP Single Board Computer
Quick Start Instruction Card

Technical Documents

Product Brief/Fact Sheet

Product Brief

Block Diagram

Tags: avnet, maaxboard, MaaXBoard_8ULP

MaaXBoard 8ULP

e14-publisher — Thu, 11 Jan 2024 22:03:44 GMT

Revision 18 posted to Boards by e14-publisher on 1/11/2024 10:03:44 PM

Welcome to MaaXBoard 8ULP

MaaXBoard 8ULP features the NXP i.MX 8ULP processor to achieve ultra-low power, EdgeLock® secured intelligent edge applications. To purchase this board Click Here.

Support Forum

Technical Specification

The LPAV domain (Low Power Audio Video) has a HiFi 4 DSP (475 MHz) core to support advanced audio, ML and sensor applications. The S400 Security Enclave and Power Manager also utilize RISC-V cores.

MaaXBoard 8ULP is engineered as two PCBs, a small SOM (43mm x 36mm) connected via 2x100-pin connectors to a baseboard (BB) in compact Raspberry Pi form-factor, which supports a versatile set of I/O interfaces. These include Gigabit Ethernet, two USB 2.0 host interfaces, plus separate USB 2.0 device interface, MIPI DSI display and MIPI CSI camera interfaces, a Pi-HAT compatible 40-pin header, MikroE Click 16-pin header plus ADC/DAC 6-pin header.

The back of the board has an M.2 module connector for easy addition of 801.11ac Wi-Fi and Bluetooth 5.1 wireless connectivity.

Click on the images to enlarge

Left Angle View

Right Angle View

Bottom View

Left Bottom View

Features

NXP i.MX 8ULP Processor
- 2x Arm Cortex A35 (800 MHz)
- 1x Arm Cortex M33 (216 MHz)
- 1x HiFi 4 DSP (475 MHz)
- 1x Fusion DSP (200 MHz)
- 1x 3D/2D-GPU (317 MHz)
Memory
- 768 KB shared RAM (8ULP on-chip)
- 2 GB LPDDR4X (32-bit)
- 32 GB eMMC memory
- 8 MB Octal SPI PSRAM
- 4 MB Octal SPI NOR Flash
Communications and User Interfaces
- 1G Ethernet port (RJ45)
- 801.11ac Wi-Fi and BT5 (optional)
- U.FL External Antenna (optional)
- 2x USB 2.0 Host and 1x USB 2.0 Device
- MIPI DSI LCD interface
- MIPI-CSI Camera Interface
- Audio Codec, DMIC and Stereo Jack I/O
- 1x User RGB LED and 3x Button Switches
Expansion, Power, Mechanical
- 40-pin Pi-HAT expansion header
- 16-pin MikroE Click Shuttle header
- 6-pin WTB Header (ADC in, DAC out)
- 10-pin JTAG/SWD debugger header
- USB-Type C connector 5V power input
- Operating Temperature: 0~70°C
- 85mm x 56mm form factor

Target Applications

Edge-AI Applications
Machine Learning
Secure Entry Access-Control Systems
Inventory and Asset Monitoring
- MaaXBoard 8ULP Single Board Computer
- Quick Start Instruction Card

Kit Includes

MaaXBoard 8ULP Single Board Computer
Quick Start Instruction Card

Technical Documents

Product Brief/Fact Sheet

Product Brief

Block Diagram

Tags: avnet, maaxboard, MaaXBoard_8ULP

MaaXBoard 8ULP

e14-publisher — Thu, 11 Jan 2024 22:00:38 GMT

Revision 17 posted to Boards by e14-publisher on 1/11/2024 10:00:38 PM

Welcome to MaaXBoard 8ULP

MaaXBoard 8ULP features the NXP i.MX 8ULP processor to achieve ultra-low power, EdgeLock® secured intelligent edge applications. To purchase this board Click Here.

Support Forum

Technical Specification

The LPAV domain (Low Power Audio Video) has a HiFi 4 DSP (475 MHz) core to support advanced audio, ML and sensor applications. The S400 Security Enclave and Power Manager also utilize RISC-V cores.

MaaXBoard 8ULP is engineered as two PCBs, a small SOM (43mm x 36mm) connected via 2x100-pin connectors to a baseboard (BB) in compact Raspberry Pi form-factor, which supports a versatile set of I/O interfaces. These include Gigabit Ethernet, two USB 2.0 host interfaces, plus separate USB 2.0 device interface, MIPI DSI display and MIPI CSI camera interfaces, a Pi-HAT compatible 40-pin header, MikroE Click 16-pin header plus ADC/DAC 6-pin header.

The back of the board has an M.2 module connector for easy addition of 801.11ac Wi-Fi and Bluetooth 5.1 wireless connectivity.

Click on the images to enlarge

Left Angle View

Right Angle View

Bottom View

Left Bottom View

Features

NXP i.MX 8ULP Processor
- 2x Arm Cortex A35 (800 MHz)
- 1x Arm Cortex M33 (216 MHz)
- 1x HiFi 4 DSP (475 MHz)
- 1x Fusion DSP (200 MHz)
- 1x 3D/2D-GPU (317 MHz)
Memory
- 768 KB shared RAM (8ULP on-chip)
- 2 GB LPDDR4X (32-bit)
- 32 GB eMMC memory
- 8 MB Octal SPI PSRAM
- 4 MB Octal SPI NOR Flash
Communications and User Interfaces
- 1G Ethernet port (RJ45)
- 801.11ac Wi-Fi and BT5 (optional)
- U.FL External Antenna (optional)
- 2x USB 2.0 Host and 1x USB 2.0 Device
- MIPI DSI LCD interface
- MIPI-CSI Camera Interface
- Audio Codec, DMIC and Stereo Jack I/O
- 1x User RGB LED and 3x Button Switches
Expansion, Power, Mechanical
- 40-pin Pi-HAT expansion header
- 16-pin MikroE Click Shuttle header
- 6-pin WTB Header (ADC in, DAC out)
- 10-pin JTAG/SWD debugger header
- USB-Type C connector 5V power input
- Operating Temperature: 0~70°C
- 85mm x 56mm form factor

Target Applications

Edge-AI Applications
Machine Learning
Secure Entry Access-Control Systems
Inventory and Asset Monitoring
- MaaXBoard 8ULP Single Board Computer
- Quick Start Instruction Card

Kit Includes

MaaXBoard 8ULP Single Board Computer
Quick Start Instruction Card

Technical Documents

Product Brief/Fact Sheet

Product Brief

Block Diagram

Tags: avnet, maaxboard, MaaXBoard_8ULP

MaaXBoard 8ULP

e14-publisher — Thu, 11 Jan 2024 21:59:38 GMT

Revision 16 posted to Boards by e14-publisher on 1/11/2024 9:59:38 PM

Welcome to MaaXBoard 8ULP

MaaXBoard 8ULP features the NXP i.MX 8ULP processor to achieve ultra-low power, EdgeLock® secured intelligent edge applications. To purchase this board Click here.

Support Forum

Technical Specification

The LPAV domain (Low Power Audio Video) has a HiFi 4 DSP (475 MHz) core to support advanced audio, ML and sensor applications. The S400 Security Enclave and Power Manager also utilize RISC-V cores.

MaaXBoard 8ULP is engineered as two PCBs, a small SOM (43mm x 36mm) connected via 2x100-pin connectors to a baseboard (BB) in compact Raspberry Pi form-factor, which supports a versatile set of I/O interfaces. These include Gigabit Ethernet, two USB 2.0 host interfaces, plus separate USB 2.0 device interface, MIPI DSI display and MIPI CSI camera interfaces, a Pi-HAT compatible 40-pin header, MikroE Click 16-pin header plus ADC/DAC 6-pin header.

The back of the board has an M.2 module connector for easy addition of 801.11ac Wi-Fi and Bluetooth 5.1 wireless connectivity.

Click on the images to enlarge

Left Angle View

Right Angle View

Bottom View

Left Bottom View

Features

NXP i.MX 8ULP Processor
- 2x Arm Cortex A35 (800 MHz)
- 1x Arm Cortex M33 (216 MHz)
- 1x HiFi 4 DSP (475 MHz)
- 1x Fusion DSP (200 MHz)
- 1x 3D/2D-GPU (317 MHz)
Memory
- 768 KB shared RAM (8ULP on-chip)
- 2 GB LPDDR4X (32-bit)
- 32 GB eMMC memory
- 8 MB Octal SPI PSRAM
- 4 MB Octal SPI NOR Flash
Communications and User Interfaces
- 1G Ethernet port (RJ45)
- 801.11ac Wi-Fi and BT5 (optional)
- U.FL External Antenna (optional)
- 2x USB 2.0 Host and 1x USB 2.0 Device
- MIPI DSI LCD interface
- MIPI-CSI Camera Interface
- Audio Codec, DMIC and Stereo Jack I/O
- 1x User RGB LED and 3x Button Switches
Expansion, Power, Mechanical
- 40-pin Pi-HAT expansion header
- 16-pin MikroE Click Shuttle header
- 6-pin WTB Header (ADC in, DAC out)
- 10-pin JTAG/SWD debugger header
- USB-Type C connector 5V power input
- Operating Temperature: 0~70°C
- 85mm x 56mm form factor

Target Applications

Edge-AI Applications
Machine Learning
Secure Entry Access-Control Systems
Inventory and Asset Monitoring
- MaaXBoard 8ULP Single Board Computer
- Quick Start Instruction Card

Kit Includes

MaaXBoard 8ULP Single Board Computer
Quick Start Instruction Card

Technical Documents

Product Brief/Fact Sheet

Product Brief

Block Diagram

Tags: avnet, maaxboard, MaaXBoard_8ULP

MaaXBoard 8ULP

e14-publisher — Thu, 11 Jan 2024 21:53:54 GMT

Revision 15 posted to Boards by e14-publisher on 1/11/2024 9:53:54 PM

Welcome to MaaXBoard 8ULP

MaaXBoard 8ULP features the NXP i.MX 8ULP processor to achieve ultra-low power, EdgeLock® secured intelligent edge applications.

Support Forum

Technical Specification

The LPAV domain (Low Power Audio Video) has a HiFi 4 DSP (475 MHz) core to support advanced audio, ML and sensor applications. The S400 Security Enclave and Power Manager also utilize RISC-V cores.

MaaXBoard 8ULP is engineered as two PCBs, a small SOM (43mm x 36mm) connected via 2x100-pin connectors to a baseboard (BB) in compact Raspberry Pi form-factor, which supports a versatile set of I/O interfaces. These include Gigabit Ethernet, two USB 2.0 host interfaces, plus separate USB 2.0 device interface, MIPI DSI display and MIPI CSI camera interfaces, a Pi-HAT compatible 40-pin header, MikroE Click 16-pin header plus ADC/DAC 6-pin header.

The back of the board has an M.2 module connector for easy addition of 801.11ac Wi-Fi and Bluetooth 5.1 wireless connectivity.

Click on the images to enlarge

Left Angle View

Right Angle View

Bottom View

Left Bottom View

Features

NXP i.MX 8ULP Processor
- 2x Arm Cortex A35 (800 MHz)
- 1x Arm Cortex M33 (216 MHz)
- 1x HiFi 4 DSP (475 MHz)
- 1x Fusion DSP (200 MHz)
- 1x 3D/2D-GPU (317 MHz)
Memory
- 768 KB shared RAM (8ULP on-chip)
- 2 GB LPDDR4X (32-bit)
- 32 GB eMMC memory
- 8 MB Octal SPI PSRAM
- 4 MB Octal SPI NOR Flash
Communications and User Interfaces
- 1G Ethernet port (RJ45)
- 801.11ac Wi-Fi and BT5 (optional)
- U.FL External Antenna (optional)
- 2x USB 2.0 Host and 1x USB 2.0 Device
- MIPI DSI LCD interface
- MIPI-CSI Camera Interface
- Audio Codec, DMIC and Stereo Jack I/O
- 1x User RGB LED and 3x Button Switches
Expansion, Power, Mechanical
- 40-pin Pi-HAT expansion header
- 16-pin MikroE Click Shuttle header
- 6-pin WTB Header (ADC in, DAC out)
- 10-pin JTAG/SWD debugger header
- USB-Type C connector 5V power input
- Operating Temperature: 0~70°C
- 85mm x 56mm form factor

Target Applications

Edge-AI Applications
Machine Learning
Secure Entry Access-Control Systems
Inventory and Asset Monitoring
- MaaXBoard 8ULP Single Board Computer
- Quick Start Instruction Card

Kit Includes

MaaXBoard 8ULP Single Board Computer
Quick Start Instruction Card

Technical Documents

Product Brief/Fact Sheet

Product Brief

Block Diagram

Tags: avnet, maaxboard, MaaXBoard_8ULP

MaaXBoard 8ULP

e14-publisher — Thu, 11 Jan 2024 21:53:07 GMT

Revision 14 posted to Boards by e14-publisher on 1/11/2024 9:53:07 PM

Welcome to MaaXBoard 8ULP

MaaXBoard 8ULP features the NXP i.MX 8ULP processor to achieve ultra-low power, EdgeLock® secured intelligent edge applications.

Support Forum

Technical Specification

The LPAV domain (Low Power Audio Video) has a HiFi 4 DSP (475 MHz) core to support advanced audio, ML and sensor applications. The S400 Security Enclave and Power Manager also utilize RISC-V cores.

MaaXBoard 8ULP is engineered as two PCBs, a small SOM (43mm x 36mm) connected via 2x100-pin connectors to a baseboard (BB) in compact Raspberry Pi form-factor, which supports a versatile set of I/O interfaces. These include Gigabit Ethernet, two USB 2.0 host interfaces, plus separate USB 2.0 device interface, MIPI DSI display and MIPI CSI camera interfaces, a Pi-HAT compatible 40-pin header, MikroE Click 16-pin header plus ADC/DAC 6-pin header.

The back of the board has an M.2 module connector for easy addition of 801.11ac Wi-Fi and Bluetooth 5.1 wireless connectivity.

Click on the images to enlarge

Left Angle View

Right Angle View

Bottom View

Left Bottom View

Features

NXP i.MX 8ULP Processor
- 2x Arm Cortex A35 (800 MHz)
- 1x Arm Cortex M33 (216 MHz)
- 1x HiFi 4 DSP (475 MHz)
- 1x Fusion DSP (200 MHz)
- 1x 3D/2D-GPU (317 MHz)
Memory
- 768 KB shared RAM (8ULP on-chip)
- 2 GB LPDDR4X (32-bit)
- 32 GB eMMC memory
- 8 MB Octal SPI PSRAM
- 4 MB Octal SPI NOR Flash
Communications and User Interfaces
- 1G Ethernet port (RJ45)
- 801.11ac Wi-Fi and BT5 (optional)
- U.FL External Antenna (optional)
- 2x USB 2.0 Host and 1x USB 2.0 Device
- MIPI DSI LCD interface
- MIPI-CSI Camera Interface
- Audio Codec, DMIC and Stereo Jack I/O
- 1x User RGB LED and 3x Button Switches
Expansion, Power, Mechanical
- 40-pin Pi-HAT expansion header
- 16-pin MikroE Click Shuttle header
- 6-pin WTB Header (ADC in, DAC out)
- 10-pin JTAG/SWD debugger header
- USB-Type C connector 5V power input
- Operating Temperature: 0~70°C
- 85mm x 56mm form factor

Target Applications

Edge-AI Applications
Machine Learning
Secure Entry Access-Control Systems
Inventory and Asset Monitoring
- MaaXBoard 8ULP Single Board Computer
- Quick Start Instruction Card

Kit Includes

MaaXBoard 8ULP Single Board Computer
Quick Start Instruction Card

Technical Documents

Product Brief/Fact Sheet

Product Brief

Block Diagram

Tags: avnet, maaxboard, MaaXBoard_8ULP

MaaXBoard 8ULP

e14-publisher — Thu, 11 Jan 2024 21:52:17 GMT

Revision 13 posted to Boards by e14-publisher on 1/11/2024 9:52:17 PM

Welcome to MaaXBoard 8ULP

MaaXBoard 8ULP features the NXP i.MX 8ULP processor to achieve ultra-low power, EdgeLock® secured intelligent edge applications.

Support Forum

Technical Specification

The LPAV domain (Low Power Audio Video) has a HiFi 4 DSP (475 MHz) core to support advanced audio, ML and sensor applications. The S400 Security Enclave and Power Manager also utilize RISC-V cores.

MaaXBoard 8ULP is engineered as two PCBs, a small SOM (43mm x 36mm) connected via 2x100-pin connectors to a baseboard (BB) in compact Raspberry Pi form-factor, which supports a versatile set of I/O interfaces. These include Gigabit Ethernet, two USB 2.0 host interfaces, plus separate USB 2.0 device interface, MIPI DSI display and MIPI CSI camera interfaces, a Pi-HAT compatible 40-pin header, MikroE Click 16-pin header plus ADC/DAC 6-pin header.

The back of the board has an M.2 module connector for easy addition of 801.11ac Wi-Fi and Bluetooth 5.1 wireless connectivity.

Click on the images to enlarge

Left Angle View

Right Angle View

Bottom View

Left Bottom View

Features

NXP i.MX 8ULP Processor
- 2x Arm Cortex A35 (800 MHz)
- 1x Arm Cortex M33 (216 MHz)
- 1x HiFi 4 DSP (475 MHz)
- 1x Fusion DSP (200 MHz)
- 1x 3D/2D-GPU (317 MHz)
Memory
- 768 KB shared RAM (8ULP on-chip)
- 2 GB LPDDR4X (32-bit)
- 32 GB eMMC memory
- 8 MB Octal SPI PSRAM
- 4 MB Octal SPI NOR Flash
Communications and User Interfaces
- 1G Ethernet port (RJ45)
- 801.11ac Wi-Fi and BT5 (optional)
- U.FL External Antenna (optional)
- 2x USB 2.0 Host and 1x USB 2.0 Device
- MIPI DSI LCD interface
- MIPI-CSI Camera Interface
- Audio Codec, DMIC and Stereo Jack I/O
- 1x User RGB LED and 3x Button Switches
Expansion, Power, Mechanical
- 40-pin Pi-HAT expansion header
- 16-pin MikroE Click Shuttle header
- 6-pin WTB Header (ADC in, DAC out)
- 10-pin JTAG/SWD debugger header
- USB-Type C connector 5V power input
- Operating Temperature: 0~70°C
- 85mm x 56mm form factor

Target Applications

Edge-AI Applications
Machine Learning
Secure Entry Access-Control Systems
Inventory and Asset Monitoring
- MaaXBoard 8ULP Single Board Computer
- Quick Start Instruction Card

Kit Includes

MaaXBoard 8ULP Single Board Computer
Quick Start Instruction Card

Technical Documents

Product Brief/Fact Sheet

Product Brief

Block Diagram

Tags: avnet, maaxboard, MaaXBoard_8ULP

MaaXBoard 8ULP

e14-publisher — Thu, 11 Jan 2024 21:50:39 GMT

Revision 12 posted to Boards by e14-publisher on 1/11/2024 9:50:39 PM

Welcome to MaaXBoard 8ULP

MaaXBoard 8ULP features the NXP i.MX 8ULP processor to achieve ultra-low power, EdgeLock® secured intelligent edge applications.

Support Forum

Technical Specification

The LPAV domain (Low Power Audio Video) has a HiFi 4 DSP (475 MHz) core to support advanced audio, ML and sensor applications. The S400 Security Enclave and Power Manager also utilize RISC-V cores.

MaaXBoard 8ULP is engineered as two PCBs, a small SOM (43mm x 36mm) connected via 2x100-pin connectors to a baseboard (BB) in compact Raspberry Pi form-factor, which supports a versatile set of I/O interfaces. These include Gigabit Ethernet, two USB 2.0 host interfaces, plus separate USB 2.0 device interface, MIPI DSI display and MIPI CSI camera interfaces, a Pi-HAT compatible 40-pin header, MikroE Click 16-pin header plus ADC/DAC 6-pin header.

The back of the board has an M.2 module connector for easy addition of 801.11ac Wi-Fi and Bluetooth 5.1 wireless connectivity.

Click on the images to enlarge

Left Angle View

Right Angle View

Bottom View

Left Bottom View

Features

NXP i.MX 8ULP Processor
- 2x Arm Cortex A35 (800 MHz)
- 1x Arm Cortex M33 (216 MHz)
- 1x HiFi 4 DSP (475 MHz)
- 1x Fusion DSP (200 MHz)
- 1x 3D/2D-GPU (317 MHz)
Memory
- 768 KB shared RAM (8ULP on-chip)
- 2 GB LPDDR4X (32-bit)
- 32 GB eMMC memory
- 8 MB Octal SPI PSRAM
- 4 MB Octal SPI NOR Flash
Communications and User Interfaces
- 1G Ethernet port (RJ45)
- 801.11ac Wi-Fi and BT5 (optional)
- U.FL External Antenna (optional)
- 2x USB 2.0 Host and 1x USB 2.0 Device
- MIPI DSI LCD interface
- MIPI-CSI Camera Interface
- Audio Codec, DMIC and Stereo Jack I/O
- 1x User RGB LED and 3x Button Switches
Expansion, Power, Mechanical
- 40-pin Pi-HAT expansion header
- 16-pin MikroE Click Shuttle header
- 6-pin WTB Header (ADC in, DAC out)
- 10-pin JTAG/SWD debugger header
- USB-Type C connector 5V power input
- Operating Temperature: 0~70°C
- 85mm x 56mm form factor

Target Applications

Edge-AI Applications
Machine Learning
Secure Entry Access-Control Systems
Inventory and Asset Monitoring
- MaaXBoard 8ULP Single Board Computer
- Quick Start Instruction Card

Kit Includes

MaaXBoard 8ULP Single Board Computer
Quick Start Instruction Card

Technical Documents

Product Brief/Fact Sheet

Product Brief

Block Diagram

Tags: avnet, maaxboard, MaaXBoard_8ULP

MaaXBoard 8ULP

e14-publisher — Wed, 13 Sep 2023 20:36:03 GMT

Revision 11 posted to Boards by e14-publisher on 9/13/2023 8:36:03 PM

Welcome to MaaXBoard 8ULP

MaaXBoard 8ULP features the NXP i.MX 8ULP processor to achieve ultra-low power, EdgeLock® secured intelligent edge applications.

Support Forum

Technical Specification

The LPAV domain (Low Power Audio Video) has a HiFi 4 DSP (475 MHz) core to support advanced audio, ML and sensor applications. The S400 Security Enclave and Power Manager also utilize RISC-V cores.

MaaXBoard 8ULP is engineered as two PCBs, a small SOM (43mm x 36mm) connected via 2x100-pin connectors to a baseboard (BB) in compact Raspberry Pi form-factor, which supports a versatile set of I/O interfaces. These include Gigabit Ethernet, two USB 2.0 host interfaces, plus separate USB 2.0 device interface, MIPI DSI display and MIPI CSI camera interfaces, a Pi-HAT compatible 40-pin header, MikroE Click 16-pin header plus ADC/DAC 6-pin header.

The back of the board has an M.2 module connector for easy addition of 801.11ac Wi-Fi and Bluetooth 5.1 wireless connectivity.

Click on the images to enlarge

Left Angle View

Right Angle View

Bottom View

Left Bottom View

Features

NXP i.MX 8ULP Processor
- 2x Arm Cortex A35 (800 MHz)
- 1x Arm Cortex M33 (216 MHz)
- 1x HiFi 4 DSP (475 MHz)
- 1x Fusion DSP (200 MHz)
- 1x 3D/2D-GPU (317 MHz)
Memory
- 768 KB shared RAM (8ULP on-chip)
- 2 GB LPDDR4X (32-bit)
- 32 GB eMMC memory
- 8 MB Octal SPI PSRAM
- 4 MB Octal SPI NOR Flash
Communications and User Interfaces
- 1G Ethernet port (RJ45)
- 801.11ac Wi-Fi and BT5 (optional)
- U.FL External Antenna (optional)
- 2x USB 2.0 Host and 1x USB 2.0 Device
- MIPI DSI LCD interface
- MIPI-CSI Camera Interface
- Audio Codec, DMIC and Stereo Jack I/O
- 1x User RGB LED and 3x Button Switches
Expansion, Power, Mechanical
- 40-pin Pi-HAT expansion header
- 16-pin MikroE Click Shuttle header
- 6-pin WTB Header (ADC in, DAC out)
- 10-pin JTAG/SWD debugger header
- USB-Type C connector 5V power input
- Operating Temperature: 0~70°C
- 85mm x 56mm form factor

Target Applications

Edge-AI Applications
Machine Learning
Secure Entry Access-Control Systems
Inventory and Asset Monitoring
- MaaXBoard 8ULP Single Board Computer
- Quick Start Instruction Card

Kit Includes

MaaXBoard 8ULP Single Board Computer
Quick Start Instruction Card

Technical Documents

Product Brief/Fact Sheet

Product Brief

Block Diagram

Tags: avnet, maaxboard, MaaXBoard_8ULP

MaaXBoard 8ULP

e14-publisher — Fri, 10 Feb 2023 11:23:11 GMT

Revision 10 posted to Boards by e14-publisher on 2/10/2023 11:23:11 AM

Welcome to MaaXBoard 8ULP

MaaXBoard 8ULP features the NXP i.MX 8ULP processor to achieve ultra-low power, EdgeLock® secured intelligent edge applications.

Support Forum

Technical Specification

The i.MX 8ULP device is architected with 3 separate processing domains: The application domain includes two Arm® Cortex®-A35 (1 GHz) cores plus 3D/2D GPUs for GUI-enabled Linux applications. The Real Time domain includes an Arm Cortex-M33 (216 MHz) core, plus Fusion DSP (200 MHz) core for low-power audio/voice use cases. Product Brief (Datasheet)

The LPAV domain (Low Power Audio Video) has a HiFi 4 DSP (600 MHz) core to support advanced audio, ML and sensor applications. The S400 Security Enclave and Power Manager also utilize RISC-V cores.

MaaXBoard 8ULP is engineered as two PCBs, a small SOM (43mm x 36mm) connected via 2x100-pin connectors to a baseboard (BB) in compact Raspberry Pi form-factor, which supports a versatile set of I/O interfaces. These include Gigabit Ethernet, two USB 2.0 host interfaces, plus separate USB 2.0 device interface, MIPI DSI display and MIPI CSI camera interfaces, a Pi-HAT compatible 40-pin header, MikroE Click 16-pin header plus ADC/DAC 6-pin header.

The back of the board has an M.2 module connector for easy addition of 801.11ac Wi-Fi and Bluetooth 5.1 wireless connectivity.

Click on the images to enlarge

Left Angle View

Right Angle View

Bottom View

Left Bottom View

Features

NXP i.MX 8ULP Processor
- 2x Arm Cortex A35 (1.0 GHz)
- 1x Arm Cortex M33 (216 MHz)
- 1x HiFi 4 DSP (600 MHz)
- 1x Fusion DSP (200 MHz)
- 1x 3D/2D-GPU (317 MHz)
Memory
- 768 KB shared RAM (8ULP on-chip)
- 2 GB LPDDR4X (32-bit)
- 32 GB eMMC memory
- 8 MB Octal SPI PSRAM
- 4 MB Octal SPI NOR Flash
Communications and User Interfaces
- 1G Ethernet port (RJ45)
- 801.11ac Wi-Fi and BT5 (optional)
- U.FL External Antenna (optional)
- 2x USB 2.0 Host and 1x USB 2.0 Device
- MIPI DSI LCD interface
- MIPI-CSI Camera Interface
- Audio Codec, DMIC and Stereo Jack I/O
- 1x User RGB LED and 3x Button Switches
Expansion, Power, Mechanical
- 40-pin Pi-HAT expansion header
- 16-pin MikroE Click Shuttle header
- 6-pin WTB Header (ADC in, DAC out)
- 10-pin JTAG/SWD debugger header
- USB-Type C connector 5V power input
- Operating Temperature: 0~70°C
- 85mm x 56mm form factor

Target Applications

Edge-AI Applications
Machine Learning
Secure Entry Access-Control Systems
Inventory and Asset Monitoring
- MaaXBoard 8ULP Single Board Computer
- Quick Start Instruction Card

Kit Includes

MaaXBoard 8ULP Single Board Computer
Quick Start Instruction Card

Technical Documents

Product Brief/Fact Sheet

Product Brief

Block Diagram

Tags: avnet, maaxboard, MaaXBoard_8ULP