MicroZed Industrial IoT Starter Kit

kuzzo — Tue, 26 Nov 2019 17:01:24 GMT

Current Revision posted to Documents by kuzzo on 11/26/2019 5:01:24 PM

The Avnet MicroZed Industrial IoT Starter Kit supports designers’ edge-to-cloud development of Internet-connected solutions and includes all the necessary building blocks for developing a production-ready, IoT-enabled, industrial processing system. The platform is based on Avnet’s MicroZed™ system-on-module (SoM) with Zynq^®-7000 All Programmable SoC from Xilinx and pluggable sensor solutions from Maxim Integrated and ST Microelectronics. The kit integrates the IBM Watson IoT agent on top of a custom-configured, certified image of the Wind River® Pulsar™ Linux operating system. The provided out-of-box example design uses a standard MQTT messaging protocol to communicate with Watson IoT, which enables registered, secure connection to additional cloud services and applications, including the IBM® Watson™ IoT Platform built on IBM Bluemix^®. Bluemix provides a rich palette of composable services to rapidly enhance IoT solutions with cognitive capabilities.

ST Microelectronics Sensor Shield

The X-NUCLEO-IKS01A1 from ST Microelectronics is a motion MEMS and environmental sensor evaluation board system compatible with the Arduino UNO R3 connector layout. It is designed around four discrete sensor solutions from STMicroelectronics, which communicate to the MicroZed via an I2C interface. The sensors include:

LSM6DS0 : MEMS 3D accelerometer (±2/±4/±8 g) + 3D gyroscope (±245/±500/±2000 dps)
LIS3MDL: MEMS 3D magnetometer (±4/ ±8/ ±12/ 16 gauss)
LPS25HB*: MEMS pressure sensor, 260-1260 hPa absolute digital output barometer
HTS221 : capacitive digital relative humidity and temperature
DIL 24-pin socket available for additional MEMS adapters and other sensors (UV index)

Maxim Integrated Thermocouple Sensor

The MAX31855PMB1 peripheral module includes the MAX31855 cold-junction compensated thermocouple-to-digital converter, which performs cold-junction compensation and digitizes the signal from a thermocouple. The module is set up to operate with the included K-type thermocouple. The data is output in a signed 14-bit, SPI-compatible, read-only format. This converter resolves temperatures to 0.25°C, allows readings as high as +1800°C and as low as -270°C, and exhibits thermocouple accuracy of ±2°C for temperatures ranging from -200°C to +700°C for K-type thermocouples.

Converts Output of a K-Type Thermocouple Directly to a Signed 14-Bit Digital Word
Cold-Junction Compensation
14-Bit, 0.25°C Resolution
Detects Thermocouple Shorts to GND or VCC
Detects Open Thermocouple
6-Pin Pmod-Compatible Connector (SPI)

Purchase Products:

MicroZed Industrial IoT Kit

Featured Partners

Starter Kit	Front Angle	Sensor Shield	Thermocouple Sensor	Block Diagram

Documentation

Top ^

Getting Started Guides

MicroZed IIoT Starter Kit Quick Start Guide

MicroZed IIoT Starter Kit Getting Started Guide

Schematics

X-NUCLEO-IKS01A1 Board Schematics

MAX31855PMB1 Data Sheet

Data Sheets

X-NUCLEO-IKS01A1 Data Sheet

Note: Documentation on the MicroZed 7010 and Carrier Card for Arduino can be found under the MicroZed and MicroZed Carrier Card sections of this site.

WHAT'S INCLUDED

7-inch LCD display assembly
- Sharp LQ070Y3LG4A 7-inch WVGA TFT-LCD with LVDS and LED
- Avnet 7-inch Projected Capacitive (PCAP) Touch Overlay
- PCAP Controller Board
- ALI3 Sharp7 Adapter
Zed LCD Interface
Standard DisplayPort to Mini DisplayPort Cable
12V power supply
Mechanical Mounting Enclosure and Stands
Getting Started Instructions

PRODUCT BRIEFS

PB-AES-Z7MB-IIOT-SK-G-V2.pdf

Tags: nonactivemicrozed, avnet_dev, nonactivezedcmty, iot_design, industrial iot starter kit, starter kit