Documents

PCN 21006 Product Change Notification - New eMMC device qualified

bhfletcher — Thu, 30 Jun 2022 23:36:24 GMT

Current Revision posted to Documents by bhfletcher on 6/30/2022 11:36:24 PM

This change was necessary due to the mature Lifecycle and availability of the original Micron MTFC8GAKAJCN-4M IT part.
The Western Digital SDINBDG4-8G-XI1 is a drop-in equivalent part that has been validated as a replacement for the Micron part.

community.element14.com/.../Product-Change-Notification-PCN-21006-_2800_PZ-eMMC_2900_.pdf

Tags: PCN21006, Western Digital, picozed, emmc

Ultra96 with Pynq and AWS Greengrass

kuzzo — Wed, 06 Oct 2021 22:13:12 GMT

Current Revision posted to Documents by kuzzo on 10/6/2021 10:13:12 PM

Ultra96 with Pynq and AWS Greengrass The Ultra96 is a development board built around the Xilinx Zynq UltraScale+ MPSoC to the Linaro96Boards specification. It includes dual-core ARM A53s, dual-core ARM R5s, 2GB of LPDDR4 memory, and an integrated FPGA fabric. The platform integrates with the PYNQ (Python + Zynq) framework and AWS Greengrass allowing for Python based IoT Edge applications to run in conjunction with high-speed deterministic applications on the heterogenous MPSoC compute platform.

Documentation and Supporting Information

Top

PRODUCT BRIEFS

5354-pb-ultra96-v3b.pdf

Tags: pynq framework, nonactiveultra96, greengrass, nonactivezedcmty, ultra96, pynq

Time-Sensitive Networking (TSN) Hardware Evaluation Kit

kuzzo — Wed, 06 Oct 2021 22:10:19 GMT

Current Revision posted to Documents by kuzzo on 10/6/2021 10:10:19 PM

An integrated, high-assurance industrial networking platform that meets the latest TSN standards.

Available TSN reference design (Coming Soon)

The Industrial Networking TSN Hardware Evaluation Kit (AES-ZU-TSN-SK-G) is built upon a platform consisting of the following off-the-shelf hardware:

2 x Avnet UltraZed board SOM w/ UltraScale+ FPGA (AES-ZU3EG-1-SOM-I-G)
2 x UltraZed-EG PCIe Carrier Card (AES-ZU-PCIECC-G)
2 x Avnet Networking FMC (AES-FMC-NETW1-G)
TSN Subsystem for 100M/1G 3 port Bridged Endpoint or Standalone Endpoint Solution (EF-DI-1GTSN-BRG-EPT-PROJ)

Click image to enlarge

Top	Angle	Side	Angle

PRODUCT BRIEFS

Coming Soon

Tags: time sensitive, time-sensitive, tsn, zedboard, networking, time-sensitive networking

Cybersecurity Concept Design

kuzzo — Wed, 06 Oct 2021 22:10:19 GMT

Current Revision posted to Documents by kuzzo on 10/6/2021 10:10:19 PM

The system is comprised of advanced hardware and software built on the Avnet UltraZed-EG^TM system-on-module (SOM), designed to be flexible and rugged for industrial IoT and small-form-factor IoT devices. The hardware plus software combination includes Mocana’s security software operating on the Xilinx Zynq® Ultrascale+^TM MPSoC, leveraging the capabilities of Infineon’s OPTIGA^TM TPM (Trusted Platform Module) 2.0 security chip.

The joint solution is comprised of secure hardware and software technologies that can be embedded into IoT and IIoT devices, including:

Avnet UltraZed-EG^TM system on module (SOM)
High-performance board-level circuit that integrates a system function in a single module.
Infineon OPTIGA^TM TPM 2.0 PMOD
Peripheral module comprised of a secure chip that generates hardware and software keys based on Trusted Computing Group (TCG) standards.
Mocana IoT Security Platform
Comprehensive cybersecurity software solution that integrates with embedded applications to handle authentication, certificate management, device and data integrity, confidentiality, and encryption and control.

To purchase the hardware needed for this concept design please visit the following component pages:

Avnet UltraZed board SOM w/ UltraScale+ FPGA

Buy Now (AES-ZU3EG-1-SOM-I-G)

Avnet UltraZed-EG SOM PCIe Carrier Card

Buy Now (AES-ZU-PCIECC-G)

Avnet Infineon TPM v2.0 Peripheral Module

Buy Now (AES-PMOD-TPM20-SLB9670-G)

UltraZed-EG w/Mocana	UltraZed-PCIe Carrier Card w/TPM Pmod	w/Pmod Powered

PRODUCT BRIEFS

not available

Tags: zedboard, avnet, ultrazed-eg, infineon optiga, cyber security, cybersecurity, mocanac iot

PicoZed Obsolete-Products

kuzzo — Wed, 06 Oct 2021 21:40:30 GMT

Current Revision posted to Documents by kuzzo on 10/6/2021 9:40:30 PM

The PicoZed family has products that are no longer in inventory but from here you can still access the product information and documents by using the links below.

Obsolete-Products

PicoZed FMC Carrier Card v1

PicoZed Smart Vision Development Kit

PicoZed Embedded Vision Kit

Pico AZTEK Transceiver Evaluation Kit

What's Included

Product Documentation
Design Resources
Schematics
Bill of Materials
Getting Started Cards

MicroZed Obsolete-Products

kuzzo — Wed, 06 Oct 2021 21:40:08 GMT

Current Revision posted to Documents by kuzzo on 10/6/2021 9:40:08 PM

The MicroZed family has products that are no longer in inventory but from here you can still access the product information and documents.

Obsolete-Products

MicroZed Industrial Iot Starter Kit

MicroZed Industry 4.0 Ethernet Kit

MicroZed Embedded Vision Kit

WiLink 8 Adapter

What's Included

Product Documentation
Design Resources
Schematics
Bill of Materials
Getting Started Cards

Tags: microzed

TDNext 1.26Mpixel Pmod Camera Kit

kuzzo — Wed, 06 Oct 2021 21:38:45 GMT

Current Revision posted to Documents by kuzzo on 10/6/2021 9:38:45 PM

The TDNext 1.26Mpixel Pmod Camera Kit allows the low cost, production-ready TDM114 camera module to be populated on Avnet’s Pmod enabled Xilinx development kits. The camera kit features ON Semiconductor’s MT9M114, a 1/6-inch 1.26Mpixel CMOS digital image sensor with an active-pixel array of 1296 (H) × 976 (V). It includes sophisticated camera functions such as auto exposure control, auto white balance, black level control, flicker avoidance, and defect correction. Designed for low light performance, the MT9M114 produces extraordinarily clear, sharp digital pictures.

Buy Now

TDNext Pmod adapter - block diagram

TDNext 1.26Mpixel Pmod Camera Kit - angle view

TDM114 camera module - front view

TDM114 camera module - side view

TDNext Pmod adapter - back view

TDNext Pmod adapter - front view

TDNext Pmod adapter - angle view

Technical Specifications

Specification	Description
SOC	XC7Z010-1CLG400 or XC7Z020-1CLG400
MEMORY	1 GB of DDR3 SDRAM 128 Mb of QSPI Flash Micro SD card interface
COMMUNICATIONS	10/100/1000 Ethernet USB 2.0
USER I/O (VIA DUAL BOARD-TO-BOARD CONNECTORS	100 User I/O (50 per connector) UConfigurable as up to 48 LVDS pairs or 100 single-ended I/O
OTHER	UART accessible via compatible Pmod JTAG configuration port PS JTAG pins accessible via board-to-board connectors 33.33 MHz oscillator User LED and push switch

Feature List:

TDNext dual 2x6 PMod adapter
TDM114 camera module, including:
- ON Semiconductor 1/6’’ MT9M114 color image sensor
- 720P30 resolution (1296 x 976 @ 30fps)
- 8/10 bits CMOS parallel Interface
- HFOV 90°
- IR cut filter for daylight illumination

Target Applications:

Security and Surveillance
Scanning
Drones and Robot Vision
Medical Imaging
Wearables
Automotive

What's Included

Quick Start Card
Hardware
- TDNext dual 2x6 Pmod adapter
- TDNext TDM114 camera module
Downloadable Documentation and Reference Designs

Product Briefs

5338-PB-AES-PMOD-TDM114-G-V1d.pdf

Documentation

Quick Start Card

PMOD-TDM114 Quick Start Card

Getting Started Guide

PMOD-TDM114 Getting Started Guide v1.0.zip

Schematics

PMOD-TDNEXT Schematics Rev 1.0

Mechanical Drawings

PMOD-TDNEXT Mechanical Rev 1.0

Bill of Materials

PMOD-TDNEXT BOM Rev 1.0

Layout (PMOD-TDNEXT)

PMOD-TDNEXT Net Length Report Rev 1.0

Reference Designs

MJPEG Video Streaming over Wi-Fi on MiniZed using the TDNext Pmod

TDNext Pmod Demo Version 1.0

Reference and Example Designs

ZedBoard TDM114 Reference Design

Tags: microzed, tdnext, camera kit

Documents

migration.user — Fri, 01 Oct 2021 18:07:55 GMT

Current Revision posted to Documents by migration.user on 10/1/2021 6:07:55 PM

UltraZed-EV Carrier Card

kuzzo — Thu, 22 Jul 2021 15:36:19 GMT

Current Revision posted to Documents by kuzzo on 7/22/2021 3:36:19 PM

Documentation Reference Designs

The UltraZed-EV Carrier Card supports the UltraZed-EV™ System-on-Module (SOM), providing easy access to the full 152 user I/O, 26 PS MIO, 4 PS GTR transceivers, and 16 GTH transceivers available from the UltraZed-EV SOM via three Micro Headers. Two 200-pin Micro Headers on the carrier card mate with the UltraZed-EV SOM, connecting 152 of the UltraZed-EV Programmable Logic (PL) I/O along with 16 GTH transceivers to FMC HPC slot, LVDS Touch Panel interface, SFP+ interface, HDMI In/Out, 3G-SDI In/Out, push button switches, DIP switches, LEDs, Xilinx SYSMON, clock generators, and 2 Digilent Pmod™ compatible interfaces.

The UltraZed-EV Carrier Card also uses a 120-pin Micro Header to gain access to the UltraZed-EV SOM Processing System (PS) MIO and GTR transceiver pins as well as USB 2.0 and Gigabit Ethernet interfaces. The UltraZed-EV SOM PS MIO and GTR pins are used on the UltraZed-EV Carrier Card to implement the microSD card, PMOD, USB 2.0/3.0, Gigabit Ethernet, SATA host, Display Port, PCIe Root Port, dual USB-UART, user LED and switch, and MAC Address device interfaces. The UltraZed-EV Carrier Card also provides several power rails to the UltraZed- EV SOM including the 12V main input voltage, user selectable bank voltages for the PL I/O (VCCOs), and the necessary voltages for the GTR and GTH transceivers. The UltraZed-EV Carrier Card is a great vehicle for validating the UltraZed-EV SOM and provides an excellent starting point for creating your own UltraZed-EV custom carrier card.

First shipments of the UltraZed-EV Carrier Card will be included in the UltraZed-EV Starter Kit, with delivery expected mid-summer 2018.

Top	Back	Front	Angle	Angle

Documentation

Top ^

Hardware Guides

UltraZed EV Carrier Card Hardware User Guide

UltraZed EV Getting Started Guide

Schematics

PRJ-US3CAR-1-01-02-Schematic-Prints

Bill of Materials

PRJ-US3CAR-1-01-0-Marketing-BOM

Layout

PBA-US3CAR-1-01-02-PDF3D

Board Definition Files

Installing-Board-Definition-Files

UltraZed EV Carrier Card FAT

UltraZed EV Carrier Card FAT

Step File

PBA-US3CAR_1-01-02

UltraZed-EV PCIe Root Complex Test Tutorial PetaLinux 2017.4

UltraZed-EV PCIe Root Complex Test Tutorial PetaLinux 2017.4.zip

Net List

Installing-Board-Definition-Files

Mechanical

PRJ-US3CAR-1-01-02-Mechanical-Drawing

Reference Designs

Top ^

SDSoC Baremetal Platform - Xilinx Matrix Multiply Example

SDSoC_Platform_v2018

SDSoC_Platform_v2018.3

SDSoC PetaLinux Platform - Xilinx Matrix Multiply Example

UltraZed-EV SDSoC Platform v2018.2

UltraZed-EV Master User Constraint List

UltraZed-EV-CC-Master-XDC_0.zip

UltraZed-EV Ethernet Performance Test Tutorial
Zynq UltraScale+ Measure networking performance when using an embedded operating system on the Avnet UltraZed-EV SOM + EV Carrier development board.

UltraZed-EV-RD_Ethernet_Performance_Test.zip

UltraZed-EV SATA Performance Test Tutorial
Description: Zynq UltraScale+ SATA drive read/write performance tests on the Avnet UltraZed-EV SOM + EV Carrier development board.

UltraZed-EV-RD-SATA_Performance.zip

Out-of-Box Designs Ultrazed-EV Carrier Card
This is the software and hardware platform, boot files, Linux kernel and RAMdisk that are provided on the pre-installed SD card.

uz7ev_evcc_sd_oob_2017_4_bsp.zip

PetaLinux Board Support Packages
Compressed PetaLinux BSPs for Avnet Zynq system platforms.

UltraZed-EV Carrier Card - PetaLinux 2020+ BSP (Sharepoint site)

UltraZed-EV Carrier Card – PetaLinux 2018.2 Standard BS

UltraZed-EV Carrier Card – PetaLinux 2018.2 Enhanced BSP

UltraZed-EV Carrier Card – PetaLinux 2017.4 Standard BSP

Vitis PetaLinux Platform

UltraZed-EV Carrier Card - Vitis Platform 2020+ (Sharepoint site)

Vitis PetaLinux Platform PreBuilt Example

UltraZed-EV Carrier Card - Vitis PetaLinux Platform 2020+ Vector Add (Sharepoint site)

Development Using Ubuntu Desktop Linux
These tutorials provide a means to integrate several different technologies on a single platform. Using the Avnet target boards, we have the power of ARM processors, combined with the unrivaled flexibility of Xilinx programmable logic to implement custom hardware systems. We use a Linux kernel as the foundation operating system running on the processor cores which enables a very large ecosystem of software to be run on our development kits. Virtual machines can provide a very convenient Ubuntu development environment for building the hardware platform and cross-compiling software to target the Processing System.

VirtualBox and Linux VM Installation Guide v2020+ (Sharepoint site)

VirtualBox and Linux VM Installation Guide v2016.4

VirtualBox and Linux VM Installation Guide v2017.1

VirtualBox and Linux VM Installation Guide v2017.2

VirtualBox and Linux VM Installation Guide v2018.2

VirtualBox and Linux VM Installation Guide v2018.3

WHAT'S INCLUDED

UltraZed-EV Carrier Card
12V AC/DC Power Supply
Quick Start Card
microUSB Cable
UltraZed-EV SOM Mounting Hardware
microSD Card 8GB
RJ45 Cable

PRODUCT BRIEFS

5342-pb-ultrazed-ev-carrier-card-v1.pdf

Tags: ultrazed-ev, ultrazed

UltraZed-EG PCIe Carrier Card

jwilcox — Thu, 11 Mar 2021 19:13:42 GMT

Current Revision posted to Documents by jwilcox on 3/11/2021 7:13:42 PM

Buy NowBuy Now

Documentation Reference Designs View Video

The UltraZed PCIe Carrier Card supports the UltraZed-EG™ System-on-Module (SOM), providing easy access to the full 180 user I/O, 26 PS MIO, and 4 PS GTR transceivers available from the UltraZed-EG SOM via three Micro Headers. Two 140-pin Micro Headers on the carrier card mate with the UltraZed-EG SOM, connecting 180 of the UltraZed-EG Programmable Logic (PL) I/O to 2 Digilent Pmod™ compatible interfaces, FMC LPC slot, LVDS Touch Panel interface, push button switches, DIP switches, LEDs, Xilinx SYSMON, and clock oscillator.

The UltraZed PCIe Carrier Card also uses a 100-pin Micro Header to gain access to the UltraZed-EG SOM Processing System (PS) MIO and GTR transceiver pins as well as USB 2.0 and Gigabit Ethernet interfaces. The UltraZed-EG SOM PS MIO and GTR pins are used on the PCIe Carrier Card to implement the microSD card, PMOD, USB 2.0/3.0, Gigabit Ethernet, SATA host, Display Port, PCIe Endpoint interface, dual USB-UART, user LED and switch, and MAC Address device interfaces.

The PCIe Carrier Card also provides several power rails to the UltraZed-EG SOM including the 12V main input voltage, user selectable bank voltages for the PL I/O (VCCOs), and the necessary voltages for the GTR transceivers. The PCIe Carrier Card is a great vehicle for validating the UltraZed-EG SOM and provides an excellent starting point for creating your own UltraZed-EG custom carrier card.

Related Products

SOM: The UltraZed-EG SOM is a highly flexible, rugged, System-On-Module (SOM) based on the Xilinx Zynq® UltraScale+™ MPSoC. Designed in a small form factor, the UltraZed-EG SOM packages all the necessary functions such as system memory, Ethernet, USB, and configuration memory needed for an embedded processing system. The UltraZed-EG provides easy access to 180 user I/O pins, 26 PS MIO pins, and 4 high-speed PS GTR transceivers along with 4 GTR reference clock inputs through three I/O connectors on the backside of the module. Available with the Zynq UltraScale+ MPSoC XCZU3EG-SFVA625 device, the UltraZed-EG SOM enables designers to build high-performance systems with confidence and ease. By simply plugging the off-the-shelf UltraZed-EG SOM into an application specific carrier card such as the Avnet IO Carrier Card, system bring-up and debug time can be cut in half, while overall system cost can be reduced by 20% or more verses a standard chip-down design.

Front	Back	w/SOM

Documentation

Top ^

Hardware Guides

UltraZed-EG PCIe Carrier Card User Guide

UltraZed-EG PCIe Carrier Card Getting Started Guide

Schematics

PRJ-US1CAR-1-01-07-Schematic-Print.PDF

Bill of Materials

PRJ-US1CAR-1-01-07-Marketing-BOM.pdf

Quick Start Card

AES-ZU-PCIECC-G-QSC-UltraZedPCle-CarrierCard-v1b.pdf

Mechanical

AES-ZU-PCIECC-G-Mechanical-v1.pdf

Board Definition Files

UltraZed-EG SOM and Carrier Cards -- Vivado 2016.2 Board Definition Files

UltraZed-EG SOM and Carrier Cards -- Vivado 2016.4 Board Definition Files

UltraZed-EG SOM and Carrier Cards -- Vivado 2017.2 and later Board Definition Files

Reference Designs

Top ^

SDSoC Baremetal Platform - Xilinx Matrix Multiply Example

SDSoC_Platform_v2018.2

SDSoC_Platform_v2018.3

SDSoC_Platform_v2019.1

UltraZed PCIe Carrier Card + FMC Network + lwIP

FMC_Network_lwIP_2018.2

Reference and Example Designs

UltraZed PCIe Carrier Card - SATA Performance Test Tutorial - PetaLinux 2017.4

Tutorial Files

UltraZed PCIe Carrier Card Tutorial – Vivado 2016.4

Out-of-Box Designs

UltraZed PCIe Carrier Card - In System QSPI and eMMC Programming

UltraZed PCIe Carrier Card - Out of Box Design

PetaLinux Board Support Package

UltraZed-EG PCIe Carrier Card - PetaLinux 2020+ BSP (Sharepoint site)

UltraZed-EG PCIe Carrier Card - PetaLinux 2019.1 Enhanced BSP

UltraZed-EG PCIe Carrier Card - PetaLinux 2018.2 Standard BSP

UltraZed-EG PCIe Carrier Card - PetaLinux 2018.2 Enhanced BSP

UltraZed-EG PCIe Carrier Card - PetaLinux 2017.4 Standard BSP

UltraZed-EG PCIe Carrier Card - PetaLinux 2017.4 Enhanced BSP

UltraZed PCIe Carrier Card - PetaLinux 2017.2 Compressed BSP

UltraZed PCIe Carrier Card - PetaLinux 2016.2 Compressed BSP

Vitis PetaLinux Platform

UltraZed-EG PCIe Carrier Card - Vitis Platform 2020+ (Sharepoint site)

Vitis PetaLinux Platform PreBuilt Example

UltraZed-EG PCIe Carrier Card - Vitis PetaLinux Platform 2020+ Vector Add (Sharepoint site)

Development Using Ubuntu Desktop Linux

VirtualBox and Linux VM Installation Guide v2016.4

VirtualBox and Linux VM Installation Guide v2017.1

VirtualBox and Linux VM Installation Guide v2017.2

VirtualBox and Linux VM Installation Guide v2018.2

VirtualBox and Linux VM Installation Guide v2018.3

VirtualBox and Linux VM Installation Guide v2019.1

Video

Top ^

Introduction to UltraZed-EG Starter Kit and SOM - Part 1

www.youtube.com/watch

In-depth with UltraZed-EG Starter Kit and SOM - Part 2

www.youtube.com/watch

Introduction to UltraZed EG System On Module - Part 3

www.youtube.com/watch

WHAT'S INCLUDED

UltraZed-EG PCIe Carrier Card
12V AC/DC Power Supply
Quick Getting Started Card
microUSB Cable (x2)
UltraZed-EG SOM Mounting Hardware
RJ45 Cable
PCIe bracket microSD Card (8GB)
ATX-to-6P Mini-Fit adapter

PRODUCT BRIEFS

5081-PB-AES-ZU-PCIECC-G-V2d.pdf

Tags: ultrazed, ultrazed-eg

Ultra96 USB-to-JTAG/UART Pod

kuzzo — Tue, 10 Nov 2020 16:53:44 GMT

Current Revision posted to Documents by kuzzo on 11/10/2020 4:53:44 PM

Ultra96 USB-to-JTAG/UART Pod

*WARNING -- Be cautious with ESD protection when using this board with Ultra96. The Ultra96 has exposed pins on the UART and JTAG headers. Be careful not to touch these pins or the circuits on the Pod when plugging the boards together.

The Ultra96 USB-to-JTAG/UART Pod is an inexpensive and convenient way to add both USB-to-UART and Xilinx USB-to-JTAG capability. With a single microUSB connection to the host, this pod provides the transceivers to communicate with both the UART and JTAG headers on Ultra96. This then allows engineers to access a serial terminal and Xilinx JTAG tools for communication, debugging, and simulation.

Features

microUSB high-speed USB 2.0 connection
Female UART header compatible with the Ultra96 UART male header
Female JTAG header compatible with the Ultra96 JTAG male header

Target Applications

Serial communication via host terminal
Xilinx JTAG tools

Documentation

Top View	Back View	Side View	Angle View	Ports

Documentation

Top ^

Getting Started Guide

Ultra96 USB-to- JTAG/UART Pod Getting Started Guide

Mechanical Drawing

Ultra96 USB-to- JTAG/UART Pod Step Model

Buy Now

WHAT'S INCLUDED

Ultra96 USB-to-JTAG/UART Pod
Quick Start Instructions

PRODUCT BRIEFS

U96 USB-to-JTAG/UART Pod - PB

Ultra96 and PYNQ Framework

kuzzo — Mon, 06 Apr 2020 16:28:27 GMT

Current Revision posted to Documents by kuzzo on 4/6/2020 4:28:27 PM

The Ultra96 is a development board built around the Xilinx Zynq UltraScale+ MPSoC to the Linaro96Boards specification. It includes quad-core ARM A53s, dual-core ARM R5s, 2GB of LPDDR4 memory and tightly-coupled 16nm UltraScale+ FPGA fabric. The platform integrates with the PYNQ (Python + Zynq) framework allowing for Python based applications to run in conjunction with high-speed deterministic applications on the heterogenous MPSoC compute platform.

Top

If you are not already familiar with PYNQ or who it is for, start with this page to learn more:

More about PYNQ

Getting Started Documentation

PYNQ Quick Start Guide for Ultra96

Supporting Information for Rebuilding PYNQ from Source

Xilinx GitHub for PYNQ

Avnet GitHub for Ultra96

Blog Tutorials

Hackster.io Blog: Adam Taylor - Ultra96 and PYNQ

Linaro 96Boards Blog: Sahaj Sarup - Trying Out PYNQ on the Ultra96

Video Tutorials

Video: Setting Up PYNQ On Ultra96

SD Card Images for Ultra96-V2 Board:

PYNQ v2.5 SD Card Image for Ultra96-V2 v2019.1 tools

PYNQ v2.4 SD Card Image for Ultra96-V2 v2018.3 tools

SD Card Images for Ultra96-V1 Board:

PYNQ v2.5 SD Card Image for Ultra96-V1 v2019.1 tools

PYNQ v2.4 SD Card Image for Ultra96-V1 v2018.3 tools

PYNQ v2.3 SD Card Image for Ultra96-V1 v2018.2 tools

PYNQ Community Project Highlights for Ultra96

https://github.com/sfox14/pynq-ekf

QNN - Quantised Neural Network

BNN - Binarised Neural Network

PYNQ Computer Vision

PRODUCT BRIEFS

5365-pb-ultra96-v2-v10b

Tags: pynq framework, nonactiveultra96, nonactivezedcmty, ultra96, pynq

MicroZed IIoT Bundle with Amazon FreeRTOS

kuzzo — Tue, 26 Nov 2019 21:50:15 GMT

Current Revision posted to Documents by kuzzo on 11/26/2019 9:50:15 PM

The MicroZed Industrial IoT Bundle is a development system built around the Xilinx Zynq-7000 All Programmable SoC. It includes dual-core ARM A9s, 1GB of DDR3 memory, 10/100/1000 Ethernet, and integrated FPGA fabric. The platform integrates with Amazon FreeRTOS to provide a powerful heterogenous Industrial IoT platform capable of executing mixed criticality applications such as complex motor control in the FPGA and IoT connectivity via the processing subsystem.

Documentation and Design Files

Getting Started Guide for the Microzed with Amazon FreeRTOS

Top

Key Features

STMicroelectronics Sensor Shield includes
- LSM6DS0: MEMS 3D accelerometer (±2/±4/±8 g) + 3D gyroscope (±245/±500/±2000 dps)
- LIS3MDL: MEMS 3D magnetometer (±4/ ±8/ ±12/ 16 gauss)
- LPS25HB*: MEMS pressure sensor, 260-1260 hPa absolute digital output barometer
- HTS221: capacitive digital relative humidity and temperature
- DIL 24-pin socket available for additional MEMS adapters and other sensors (UV index)
Maxim Integrated Thermocouple Sensor
- Converts Output of a K-Type Thermocouple Directly to a Signed 14-Bit Digital Word
- Cold-Junction Compensation
- 14-Bit, 0.25°C Resolution
- Detects Thermocouple Shorts to GND or VCC
- Detects Open Thermocouple
- 6-Pin Pmod-Compatible Connector (SPI)
Production ready, MidcroZed 7010 SOM
- Based on Xilinx Zynq-7000 SoC
- Dual ARM© Cortex™-A9 processing system
- FPGA logic
Expandable development platform
- R3 Arduino-compatible shield expansion slot
- Two 2x6 peripheral module expansion slots
- Additional user header providing access to SPI, I2C, UART, and GPIO on MicroZe
Pluggable sensor options
- ST Microelectronics motion MEMS and environmental sensor shield
- Connects to shield site
- Six I2C based sensor solutions
- 3-axis accelerometer + 3-axis gyroscope
- 3-axis magnetometer
- Humidity and temperature
- Pressure
Connectivity
- 10/100/1000 Ethernet Port
- Optional WILINK8 WiFi/BLE add-on

PRODUCT BRIEFS

5071-PB-AES-Z7MB-IIOT-SK-G-V2c.pdf

Tags: nonactivemicrozed, nonactivezedcmty, freertos, amazon

MMP Baseboard II (EOL)

kuzzo — Tue, 26 Nov 2019 21:36:11 GMT

Current Revision posted to Documents by kuzzo on 11/26/2019 9:36:11 PM

Documentation Technical Specifications

EOL NOTICE: This product is no longer available

Please read the End-of-Life notice for this product

The Mini-Module Plus Baseboard II provides the necessary power, user switches, LEDs, USB-RS232 port, PCIe Gen 2 x4 connector, SFP connector, DisplayPort output connector, FMC LPC slot, micro SD card connector, and two PMOD connectors. The Baseboard II supports one MMP FPGA/SoC module slot and a MMP power module slot. The Digilent JTAG-SMT1 module is included on the baseboard to enable the download of configuration data to the FPGA directly or to program the BPI Flash with the FPGA configuration file.

Front w/power module	Front	Angle	Block Diagram

Documentation

Top ^

Bill of Materials

BOM-MMBB2.pdf

Mechanical Drawings

MMP_BB2_MechanicalDrawing_RevB.pdf

Hardware Guides

5278-Mini-Module-Plus-BB2-UG-RevC-V1.pdf

Schematics

PicoZed SDR FMC Carrier Schematic Rev B.pdf

Technical Specifications

Top ^

Specification	Description
INTERFACES	DisplayPort output One Mini-Module Plus Slot PCIe x4 edge connector One SFP socket Micro SD card interface Five user LEDs One 8-position DIP switch RS232-USB port Four user push-button switches One general-purpose MGT via SMA connectors
EXPANSION SLOTS	One FMC LPC slot (2.5 or 3.3 V VADJ) Two PMOD headers
CLOCKS	Programmable LVDS clock source (MGT reference clock input) Programmable LVCMOS clock source
DEBUG PROGRAMMING	Digilent JTAG-SMT1 module PC4 JTAG header
POWER	Power module connector

WHAT'S INCLUDED

Avnet Mini-Module Plus Baseboard II
Power, USB, and Ethernet Cables
- 12 V power supply (US/UK/Euro AC cords)
- (2) Two USB A-mini-B cables
- Ethernet cable

PRODUCT BRIEFS

PB-AES-Z7PZSDR-AD9361-DEV-G-V1.pdf

Tags: zedboard, nonactivezedcmty, nonactivezedboard, 10 inch display kit

Zynq MMP (EOL)

kuzzo — Tue, 26 Nov 2019 21:35:43 GMT

Current Revision posted to Documents by kuzzo on 11/26/2019 9:35:43 PM

Documentation Technical Specifications

EOL NOTICE: This product is no longer available

Please read the End-of-Life notice for this product

The Xilinx Zynq®-7000 All Programmable SoC Mini-Module Plus is a small system-on-a-module (SOM), containing all the necessary functions and interfaces for a Zynq-7000 All Programmable SoC system. For development purposes, the module can be combined with the Mini-Module Plus Baseboard II and a Mini-Module Plus Power Supply to provide an out-of-box development system ready for prototyping. The modular concept also allows the same Zynq-7000 All Programmable SoC to be placed on a user created baseboard, thereby simplifying the user’s baseboard design and reducing the development risk.

Front	Bottom	Angle	Block Diagram

Documentation

Top ^

Hardware Guides

7Z7045 Mini Module Plus Users Guide v1.1

Zynq Mini Module Plus Rev B Errata

Zynq Mini Module Plus JX Pinout Table

Schematics

Zynq – 7000 AP SoCMini-Module Plus –Schematic

Mechanical Drawings

Zynq MMP Mechanical Drawing

Zynq MMP 3D Model

Programmable Logic Master User Constraints

Master XDC File

Master User Constraints File

Board Definition Files

Zynq Mini-Module Plus Board Definition Files Vivado 2014.1

Zynq Mini-Module Plus Board Definition Files Vivado 2014.2

Zynq Mini-Module Plus Board Definition Files Vivado 2015.1

Zynq Mini-Module Plus Board Definition Files Vivado 2015.3 or later

Bill of Materials (BOM)

Zynq_Z045_MMP_RevB_BOM

Mini-Module PLUS platform End of Life Notification

MMP EOL Notification

Errata and Product Change Notices

Avnet SOMs with Kingston DDR3 Errata

PCN16002 - Zynq DDR3 Memory Update

Technical Specifications

Top ^

Specification	Description
ZYNQ PROCESSOR	Dual ARM® Cortex™-A9 MPCore™ Up to 800 MHz operation NEON™ Processing / FPU Engines
MEMORY	1 GB DDR3 memory 256 Mb Quad SPI Flash 128MB parallel Flash (PL side) Micro SD card cage 4 GB micro SD Card Included
CONNECTIVITY	10/100/1000 Ethernet USB USB 2.0 port USB UART
OTHER PERIPHERALS	Real-time clock 8KB I2C EEPROM
USER I/O	132 User I/O via module connectors 8 GTX transceivers via module connectors
CLOCKS	Programmable GTX clock 200 MHz LVDS oscillator
DEBUG/PROGRAMMING	JTAG via module connectors PJTAG header
DIMENSIONS	Length: 4.0 inches Width: 2.25 inches
CERTIFICATION	CE and RoHS certified

WHAT'S INCLUDED

Zynq-7000 All Programmable SoC Mini-Module Plus
- Zynq-7000 AP SoC XC7Z045-1FFG900 or XC7Z100-2FFG900 device
Xilinx Vivado® Design Edition software license voucher (device locked to 7Z045 or 7Z100)
- Bundled with the Zynq-7000 SoC All Programmable Mini-Module Plus

PRODUCT BRIEFS

PB-AES-Z7PZSDR-AD9361-DEV-G-V1.pdf

Tags: zedboard, nonactivezedcmty, nonactivezedboard, 10 inch display kit

10-inch Zed Touch Display Kit

kuzzo — Tue, 26 Nov 2019 21:34:47 GMT

Current Revision posted to Documents by kuzzo on 11/26/2019 9:34:47 PM

Documentation Reference Designs Technical Specifications

Avnet’s 10-inch Touch Display Kit demonstrates a complete embedded display system, allowing for video output to an integrated 10-inch LVDS display with the benefits of projected capacitive touch technology. The kit combines a 1280 x 800 WXGA TFT-LCD display with a PCAP touch sensor overlay, I2C touch controller, LED backlight supply, haptic feedback driver, 3-axis accelerometer and all the necessary cables for connecting to a development board. The touch display easily connects to the ZedBoard™, MicroZed™ with compatible carrier, PicoZed™ with compatible carrier, or Zynq® Mini-ITX through the standard DisplayPort cable and adapter cards included with the kit.

Kit Box	Kit Back	Kit Front

Documentation

Top ^

Getting Started Guides

Welcome Letter

Quick Start Instructions

Getting Started Guide

Quick Start SD Image V1

Schematics

ALI3 Ampire10 Adapter Schematics Rev A (AES-ALI3-AMPIRE10-G Adapter)

Zed LCD Interface Schematics Rev 1

Bill of Materials

ALI3 Ampire10 Adapter BOM Rev A (AES-ALI3-AMPIRE10-G Adapter)

Zed LCD Interface BOM Rev 1

Reference Designs

Top ^

10-inch Display Panel Controller Standalone Tutorials for PicoZed FMC Carrier Card V2

Vivado 2015.2 Version

10-inch Display Panel Controller Standalone Tutorials for MicroZed Embedded Vision Carrier

Vivado 2015.2 Version

10-inch Display Panel Controller Standalone Tutorials for MicroZed FMC Carrier Card

Vivado 2015.2 Version

10-inch Display Panel Controller Standalone Tutorials for MicroZed I/O Carrier Card

Vivado 2015.2 Version

10-inch Display Panel Controller Standalone Tutorials for Mini-ITX

Vivado 2015.2 Version

10-inch Display Panel Controller Standalone Tutorials for ZedBoard

Vivado 2015.2 Version

Technical Specifications

Top ^

Specification	Description
DEMONSTRATES A COMPLETE EMBEDDED DISPLAY SYSTEM	Output to integrated 10” WXGA display Provides benefits of integrated PCAP touch solution
10-INCH LCD TOUCH DISPLAY ASSEMBLY	Ampire LVDS 10.1 inch WXGA TFT-LCD with LED backlight Integrated Projected Capacitive (PCAP) touch overlay Integrated PCAP controller flex tail Samsung Linear Resonant Actuator (LRA) for haptics
TOUCH OVERLAY CAPABILITIES	Single finger touch Water droplet rejection Laxex glove and light duty glove operation Touch controller tuned for 4 mm glass panel thickness

WHAT'S INCLUDED

10-inch LCD display assembly
- Ampire LVDS 10.1 inch WXGA TFT-LCD with LED backlight
- Integrated Projected Capacitive (PCAP) touch overlay
- Integrated PCAP controller flex tail
- Samsung Linear Resonant Actuator (LRA) for haptics
Zed LCD Interface Board
Standard DisplayPort to Mini DisplayPort Cable
12V power supply
Getting Started Instructions

PRODUCT BRIEFS

AES-ALI3-AMPIRE10-G-PB-10inTouch-v3a.pdf

Tags: zedboard, nonactivezedcmty, nonactivezedboard, 10 inch display kit

7-inch Zed Touch Display Kit

kuzzo — Tue, 26 Nov 2019 21:30:51 GMT

Current Revision posted to Documents by kuzzo on 11/26/2019 9:30:51 PM

Documentation Reference Designs Technical Specifications View Video

The 7-inch Zed Touch Display Kit provides engineers with everything needed to develop products with interactive GUIs and touchscreen capabilities. The kit combines an 800 x 480 WVGA TFT-LCD display with an industrial projective capacitive touch sensor, I2C-based touch controller, LED backlight supply and all the necessary cables. The touch display easily connects to the ZedBoard™, MicroZed™ with compatible carrier, PicoZed™ with compatible carrier, or Zynq® Mini-ITX through the standard DisplayPort cable and adapter cards included with the kit. The projected capacitive touch overlay provides enhanced touch ruggedness which is suitable for outdoor or industrial environments.

Part Change Notification: Part Number: AES-ALI2-ZED-G has been replaced by AES-ALI3-ZED-G.

Features:

Output to integrated 7” WVGA display
Provides benefits of Avnet PCAP touch solution
Touch overlay capabilities
Single finger touch
Up to 6 mm glass panel thickness
Suitable for high humidity environment
Supports industrial requirements
Water rejection and immunity

Enhanced Features:

More tightly integrated touch solution where the projected capacitive (PCAP) touch controller is now integrated with the ITO sensor.
New mechanical mounting enclosure couples the display, touch overlay, and adapter board into a more rugged assembly than the previous generation kit. Mechanical 3D model for this enclosure is available to customers as a potential starting point or reference for their own product enclosure design.
Migration to more compact Mini DisplayPort connector format for display adapter boards. -Updated reference design tutorials available for download from ZedBoard.org community website.

Kit	Overlay and Controller	ALI3 Sharp 7 (on LCD assembly)	Zed LCD Interface

Documentation

Top ^

Getting Started Guides

Welcome Letter

Quick Start Instructions

Getting Started Guide

Quick Start SD Image V4d

Schematics

ALI3 Sharp7 Adapter Schematics Rev 2 (AES-ALI3-ZED-G Adapter)

ALI3 Sharp7 Adapter Schematics Rev 1 (AES-ALI2-ZED-G Adapter)

Zed LCD Interface Schematics Rev 1

Bill of Materials

ALI3 Sharp7 Adapter BOM Rev 2 (AES-ALI3-ZED-G Adapter)

ALI3 Sharp7 Adapter BOM Rev 1 (AES-ALI2-ZED-G Adapter)

Zed LCD Interface BOM Rev 1

White Paper

Making Industrial Touch A Reality

Reference Designs

Top ^

Display Panel Controller Standalone Tutorials for PicoZed FMC Carrier Card V2

Vivado 2015.2 Version

Display Panel Controller Standalone Tutorials for MicroZed Embedded Vision Carrier

Vivado 2015.2 Version

Vivado 2014.4 Version

Display Panel Controller Standalone Tutorials for MicroZed FMC Carrier Card

Vivado 2015.2 Version

Vivado 2014.4 Version

Vivado 2013.3 Version

Display Panel Controller Standalone Tutorials for MicroZed I/O Carrier Card

Vivado 2015.2 Version

Vivado 2014.4 Version

Vivado 2013.3 Version

ISE 14.6 Version

ISE 14.4 Version

Display Panel Controller Standalone Tutorials for Mini-ITX

Vivado 2015.2 Version

Vivado 2014.4 Version

Display Panel Controller Standalone Tutorials for ZedBoard

Vivado 2015.2 Version

Vivado 2014.4 Version

Vivado 2013.3 Version

ISE 14.6 Version

ISE 14.4 Version

Display Panel Ubuntu Tutorial for MicroZed I/O Carrier Card

ISE 14.4 Version

Display Panel Ubuntu Tutorial for ZedBoard

ISE 14.4 Version

Technical Specifications

Top ^

Specification	Description
LCD (on LCD ASSEMBLY)	7” WVGA TFT-LCD 800x480 resolution LVDS interface 350 nits brightness 400:1 contrast LED backlight
ALI3 SHARP7 ADAPTER (on LCD ASSEMBLY)	One DisplayPort Connector One PCAP Controller Connector One LCD Connector One DC Power Jack Power LEDs
AVNET PCAP TOUCH OVERLAY AND PCAP CONTROLLER BOARD (on LCD ASSEMBLY)	7” ITO Sensor Cypress PCAP Controller Attached to LCD and 3mm Plexiglas
ZED LCD INTERFACE	Two Digilent PmodTM Compatible Headers One DisplayPort connector Status LEDs
POWER AND CABLING	12V DC Input @ 3.0A (max) Power Supply Standard DisplayPort Cable MicroUSB Cable

Video

Top ^

Introduction to 7” Zed Touch Display Kit

Introduction to 7" Zed Touch Display Kit from Avnet on Vimeo.

WHAT'S INCLUDED

7-inch LCD display assembly
- Sharp LQ070Y3LG4A 7-inch WVGA TFT-LCD with LVDS and LED
- Avnet 7-inch Projected Capacitive (PCAP) Touch Overlay
- PCAP Controller Board
- ALI3 Sharp7 Adapter
Zed LCD Interface
Standard DisplayPort to Mini DisplayPort Cable
12V power supply
Mechanical Mounting Enclosure and Stands
Getting Started Instructions

PRODUCT BRIEFS

PB-AES-AES-ALI3-ZED-G-v3.pdf

Tags: zedboard, nonactivezedcmty, nonactivezedboard, 7 inch touch display kit, kit

Aaware Far Field Voice Development Kit

kuzzo — Tue, 26 Nov 2019 21:26:31 GMT

Current Revision posted to Documents by kuzzo on 11/26/2019 9:26:31 PM

Documentation

The Aaware far field voice development platform provides a complete single-chip voice and sound capture solution focused on applications where strong interfering sources and high ambient noise are present. The platform consists of a 13-microphone array shield and a custom Avnet MiniZed™ 7010 processing board based on the Xilinx® Zynq®-7000 All Programmable SoC.

The Aaware sound capture algorithms include source localization, proprietary spatial/spectral/temporal source separation, and noise suppression to deliver low distortion audio of acoustic sources in the sound field. Up to 16 microphone arrays are supported, including non-uniform 1D and 2D arrays in end-fire or broad-side configurations. 1D and 2D source localization is supported depending on array choice. The Aaware sound capture algorithms are accelerated in FPGA hardware, optimizing performance, software footprint, cost, and power.

The AEV13MZ platform also integrates Sensory’ Inc. multi-wake word for robust voice assistant applications in the presence of strong direct or ambient noise with low distortion, allowing for better integration with third party speech and natural language technologies. The Aaware technology is always on, captures the speaker as they move, and cancels multiple noise sources without needing the reference audio, making it a very flexible fit for any product that anticipates strong interfering noise sources.

AEV13-MZ Features:

Complete and Easy to Integrate Solution

- - Includes Complete Linux (Ubuntu) Development Environment
  - ALSA based audio API
  - Single Chip Xilinx Zynq Processing Solution
  - oday’s Multi-Chip Solutions = DSP + SoC

Robustness

- - Removes Interference Without Reference
  - Strong Ambient Noise Rejection
  - Multi-channel AEC Support
  - Localize Weaker Source Within Stronger Interference
  - Source Localization Passed to Downstream Applications

Scalability

- - Up to 13 Microphone Array Support
  - Multi-Zynq Device Size Choices
  - Single, Dual or Quad Core

Flexibility

- - 1D/2D Non-uniform Microphone Array Support
  - Single or Multi-Wake Word Support
  - Cloud or Embedded Voice Service Support

Target Applications

- - Digital Voice Assistants
  - Smart Home
  - Robotics
  - Automotive
  - Surveillance
  - Industrial IoT

Top	Bottom	Shield & MiniZed	Block Diagram

Documentation

Top ^

Quick Start Guides

Aaware AEV13MZ Quick Start Guide v1

Bill of Materials (BOM)

Aaware Shield Bill of Materials v3b

Mechanical Drawings

Aaware Shield Mechanical v3

Schematics

Aaware Shield Schematics v3

WHAT'S INCLUDED

Microphone Array Shield
MiniZed (7010)
Quick Start Guide
Aaware reference design
Micro-USB cable

PRODUCT BRIEFS

Aaware-Product Brief-AEV13MZ_v2.pdf

Tags: zedboard, voice processing, nonactivezedcmty, nonactivezedboard, aaware, kit

ZedBoard Intelligent Drives Kit II

kuzzo — Tue, 26 Nov 2019 21:20:53 GMT

Current Revision posted to Documents by kuzzo on 11/26/2019 9:20:53 PM

Documentation Technical Specifications

Combining the Xilinx Zynq®-7000 All Programmable SoC ARM® dual-core Cortex™-A9 + 28 nm programmable logic with the latest generation Analog Devices high-precision data converters and digital isolation, this kit enables high performance motor control and industrial networking connectivity. A brushless DC motor control reference design featuring Analog Devices Linux framework provides an ideal infrastructure for quickly adding custom control algorithms. Model-Based Design for Zynq is supported using Simulink®, Embedded Coder®, and HDL Coder™ from MathWorks.

Support from Simulink®

Linux Reference Design

Analog Devices Linux Motor Drive Reference Design Wiki

Kit II Box Set	Kit Unboxed	Block Diagram

Documentation

Top ^

Getting Started Guides

Getting Started Guide

Quick Start

Welcome Letter

Technical Specifications

Top ^

Specification	Description
FEATURES	Analog Devices AD-FMCMOTCON2-EBZ high performance servo module Drive 2 BLDC / PMSM / Brushed DC / Stepper motors up to 48 V @ 20 A AD7403/5 Isolated 20 MHz Σ-Δ modulators for precise voltage and current measurement ADuM5000/7640 power and digital signal isolation ADuM5230 Isolated Half-Bridge Driver for High Frequency Switching Integrated over-current and reverse-voltage protection Dual Gigabit IEEE1588 Ethernet PHYs for high speed industrial communication Isolated Xilinx XADC interface Sensored or sensoreless position measurement Encoder support includes BISS, EnDAT, Hall Sensor, and resolver
TARGET APPLICATIONS	Industrial servos and drives Manufacturing, assembly, and automation Medical diagnostic Surgical assist robotics Video surveillance and machine vision Power efficient drives for transportation

Specification

Description

FEATURES

Analog Devices AD-FMCMOTCON2-EBZ high performance servo module
Drive 2 BLDC / PMSM / Brushed DC / Stepper motors up to 48 V @ 20 A
AD7403/5 Isolated 20 MHz Σ-Δ modulators for precise voltage and current measurement
ADuM5000/7640 power and digital signal isolation ADuM5230 Isolated Half-Bridge Driver for High Frequency Switching
Integrated over-current and reverse-voltage protection
Dual Gigabit IEEE1588 Ethernet PHYs for high speed industrial communication
Isolated Xilinx XADC interface
Sensored or sensoreless position measurement
Encoder support includes BISS, EnDAT, Hall Sensor, and resolver

TARGET APPLICATIONS

Industrial servos and drives
Manufacturing, assembly, and automation
Medical diagnostic
Surgical assist robotics
Video surveillance and machine vision
Power efficient drives for transportation

WHAT'S INCLUDED

Avnet ZedBoard Z7020
Xilinx Vivado™ Design Edition voucher
Analog Devices AD-FMCMOTCON2-EBZ Module
Brushless DC motor: 24V, 4000 RPM, Hall Sensors and 1250 CPR indexed encoder
8 GB SD card programmed with application
Ethernet cable
HDMI cable
Micro USB cable
12V ZedBoard power supply
24V AD-FMCMOTCON2-EBZ power supply
Linux drivers, applications software, HDL source, reference designs, full schematics and Gerbers
MathWorks Motor Control Design Package (optional, North America only)
Dynamometer dynamically adjustable load system (optional)

PRODUCT BRIEFS

PB-AES-ZIDK2-ADI-G-V1.pdf

Tags: zedboard, nonactivezedcmty, nonactivezedboard, intelligent drive kit 2

ZedBoard SDR II Evaluation Kit

kuzzo — Tue, 26 Nov 2019 21:19:43 GMT

Current Revision posted to Documents by kuzzo on 11/26/2019 9:19:43 PM

Documentation Technical Specifications

Zynq-7000® All Programmable SoC / AD9361 Software-Defined Radio Evaluation Kit

Combining ZedBoard with the Analog Devices AD-FMCOMMS2-EBZ FMC module, which features the Analog Devices AD9361 integrated RF Agile Transceiver, this kit enables a broad range of transceiver applications for wireless communications. Tuned to a narrower RF range in the 2400 – 2500 MHz region, the kit is ideal for the RF engineer seeking optimized system performance meeting datasheet specifications in a defined range of RF spectrum.

AD-FMCOMMS2-EBZ	ZedBoard Connected	Block Diagram

Documentation

Top ^

Getting Started Guides

SDR II Getting Started Guide

Technical Specifications

Top ^

Specification	Description
ZYNQ PROCESSOR	Dual ARM® Cortex™-A9 MPCore™ Up to 667 MHz operation NEON™ Processing / FPU Engines
MEMEORY	Industrial servos and drives
CONNECTIVITY	10/100/1000 Ethernet USB OTG (Host mode) USB UART
AUDIO	24-bit stereo audio CODEC Stereo line in/out Headphone Microphone input
ANALOG DEVICES AD9361 RF AGILE TRANSCEIVER	RF 2 × 2 transceiver with integrated 12-bit DACs and ADCs Supports TDD and FDD operation Tunable channel bandwidth: <200 kHz to 56 MHz RX gain control Real-time monitor and control signals for manual gain Independent automatic gain control
RF BAND	Factory-tuned for optimal performance at 2400 – 2500 MHz User-modifiable to other RF center-frequencies from 70 MHz to 6.0 GHz
SYNCHRONIZATION	Supports MIMO radio, with less than 1 sample sync on both ADC and DAC
INCLUDES	Schematics, layout, BOM, HDL, Linux drivers and application software
3RD-PARTY SUPPORT	Optional MathWorks Design Package for communication systems * * Available in North America only

WHAT'S INCLUDED

ZedBoard (with power supply and cables)
Analog Devices AD-FMCOMMS2-EBZ
(4) Pulse LTE blade antennas
Xilinx Vivado® Design Edition (device-locked to Z7020)
8 GB SD Card
Getting started card
Downloadable documentation and reference designs
MathWorks Motor Control Design Package (optional)”

PRODUCT BRIEFS

PB-AES-ZSDR2-ADI-G-V1.pdf

Tags: zedboard, sdr 2, evaluation kit, nonactivezedcmty, nonactivezedboard, sdr ii