Blog

Evaluating FRDM-KW41Z using NXP Test and Tool Utility

2016-11-28T12:13:04Z

This blog demonstrates on testing the freedom KW41Z board using NXP’s Test and Tool utility software. We are testing the board using MAC2006 FSCI packet error rate. The Test Tool utility is a Windows®︎ based graphical interface that communicates...(read more)

Getting started with demo-apps and executing ecompass application for FRDM-KW41Z NXP Freedom Development Platform

2016-11-21T13:32:52Z

This document shows how to execute the demo-apps for FRDM-KW41ZFRDM-KW41Z that comes along with connectivity software package To proceed further the below are the prerequisites: 1. KDS3.2.0 installed on your computer(You can download lates...(read more)

Getting Started with KSDK and FreeRTOS [Running Freertos_mutex example using FRDM-KW41Z]

2016-11-21T09:31:46Z

Kinetis Software Development Kit (KSDK) 2.0 provides a comprehensive software package with pre-integrated FreeRTOS OS. Freescale provides FreeRTOS OS additions, such as RTOS driver wrappers, RTOS ready FatFs file system, and the implementation of Fre...(read more)

Wireless UART demo using Kinetis BLE android app with FRDM-KW41Z Freedom Board

2016-11-11T12:28:54Z

In my earlier blog i had demonstrated Wireless UART using two KW41Z board for demonstrating wireless uart using BLE.Here in part-2 we will execute with one KW41Z board + the other with Smart phone with Kinetis BLE Toolbox android app. Required:1...(read more)

Running Wireless UART application using Bluetooth®︎ Low Energy with FRDM-KW41Z

2016-11-09T12:59:20Z

This blog describes the Bluetooth®︎ Low Energy Stack enablement for the Freescale Freedom development platform with the Kinetis KW41Z dual wireless mode system-on-chip (SoC). The Software Development Package provides a Bluetooth Low Energy v4.2-compli...(read more)

Running a Hello World demo on FRDM-KW41Z using Kinetis Design Studio IDE

2016-11-06T18:38:27Z

This blog describes the steps required to configure Kinetis Design Studio(KDS IDE to build run and debug example applications The helloworld demo application targeted for the FRDM-K64FFRDM-K64F Freedom hardware platform is used as an example th...(read more)

Part-2: Executing SMAC connectivity demo application using KW41Z freedom board on terminal window

2016-10-24T07:36:58Z

In continuation to Part-1 (Part-1: Getting started with FRDM-KW41Z [executing MKW41Z SMAC based Connectivity Test application]) of SMAC connectivity demo, we will see how to execute the demo application on hyperterminal. Open a putty or tera ter...(read more)

Part-1: Getting started with FRDM-KW41Z [executing MKW41Z SMAC based Connectivity Test application]

2016-10-24T07:34:41Z

This blog introduces to New FRDM-KW41ZFRDM-KW41Z Wireless Microcontrollers(MCU development board and demonstrates the connectivity test application The FRDM-KW41ZFRDM-KW41Z development board is an evaluation environment supporting N...(read more)

Displaying 12-bit ADC value on hyperterminal by connecting a potentiometer and indicating through LED [Implementing 12-bit ADC using KSDK on FRDM-KL28Z freedom board by polling method]

2016-10-04T12:01:06Z

This blog gives an overview on implementing 12-bit ADC by polling method and displaying the digital values over hyper terminal. Corresponding to the digital values the Red Green and Blue LED’s are indicated. For 12-bit resolution ADC the digital...(read more)

Introduction to KSDK Project Generator 2.2 tool and how to create new project using KL28Z [Create a project using KSDK Project Generator and toggling an LED on FRDM-KL28Z NXP Freedom Development Platform]

2016-10-03T01:08:01Z

The KSDK Project Generator requires the user to install an instance of KSDK 1.2.0, 1.3.0 or 2.x before generating new projects. Visit www.nxp.com/ksdk to get the Kinetis SDK. Features of KSDK Project Generator 2.2:The following features are avai...(read more)

Getting Started with FRDM-KL28Z NXP Freedom Development Platform [Running a Bubble demo application using Kinetis Development Studio IDE and its tool chain]

2016-09-19T12:53:35Z

This document introduces new freedom development board FRDM-KL28Z and demonstrates the bubble application And how to import the existing project of Kinetis SDK V2.0(for FRDM-KL28 using the kinetis Design Studio version 3.2.0 implemented using F...(read more)

Kinetis SDK V2.0 configuration generation for FRDM-KL28Z

2016-09-18T17:29:41Z

The below steps are to be followed to start working on New freedom board FRDM-KL28Z using Kinetis Expert system configuration tool. Open the nxp link https://kex.nxp.com/en/welcome Click on Build an SDK as shown and select “New...(read more)

How to set and check the 48-bit BLE MAC Address into KW4xZ/3xZ

2016-08-22T05:45:04Z

The content has been cited from https://community.nxp.com/thread/429919 Below is the summary on how to write and read MAC address for KW40/41 MCUs cited from NXP community https://community.nxp.com/thread/429919 On the BLE Host Stack...(read more)

Executing Wireless messenger Application using KW40Z connectivity software [Demonstrating and executing the cloning of wireless messenger project using FRDM-KW40Z NXP Freedom Development Platform]

2016-08-19T13:13:28Z

This document shows a brief demonstration on executing wireless messenger application using NXP Bluetooth FRDM-KW40Z wireless development board. To proceed further the below are the prerequisites:1. The freedom hardware board i.e FRD...(read more)

Demonstrating Power Measurement tool (PMT) using LPCXpreso on LPC4367 development board

2016-08-07T19:40:33Z

Refer to my earlier blog on working with OM13088-LPC4367 LPCXpresso development board; i am using the same project executable of peripheral timer which blinks LED at every 1 second interrupt for demonstrating the PMT The Power measurement tool e...(read more)