/products/devtools/kinetiskl2freedomboard/b/blog/posts/blog-frdm-kl25z-update-sdaAs I mentioned last time, one of the features I like packaged with the FRDM-KL25Z release is the OpenSDA serial debugger from Pemicro ( www.pemicro.com/opensda ). The application creates a virtual USB drive on your PC where you can drag and drop ...en-USTelligent Community 12https://community.element14.com/products/devtools/kinetiskl2freedomboard/b/blog/posts/blog-frdm-kl25z-update-sdaTue, 30 Oct 2012 09:50:22 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:bb560dd7-382f-43cc-8d94-efb8f89c49e9FreescaleTools_and_Software1<p>Hello Gordon</p><p>&nbsp;</p><p>Thank you for your review of the OpenSDA Mass Storage Device mode from the FRDM-KL25Z</p><p><br />Just to clarify the point concerning the reprogramming of a new bin file. </p><p>The board you have received for the preview roadtest prior to the launch is a preproduction version, but the final version that customers have received can be reprogrammed without it was necessarry to disconnect/reconnect the USB.</p><p>&nbsp;</p><p>When you disconnect/reconnect the USB, the firmware previously uploaded in the MKL25Z128VLK4 restarts (and you can overwrite it by draging&#39;n dropping a new bin file in the explorer, if you are still in OpenSDA MSD mode)</p><img src="https://community.element14.com/aggbug?PostID=15063&AppID=73&AppType=Weblog&ContentType=0" width="1" height="1">