Labview Blogs - All Comments

RE: Automate Measuring the Analogue Front-end of Data Acquisition Board for Pi Pico - Pt. 1: test setup

Jan Cumps — Wed, 08 Nov 2023 18:28:01 GMT

Voila

[View:https://youtu.be/pXX_Shc9aQI:640:360]

RE: Automate Measuring the Analogue Front-end of Data Acquisition Board for Pi Pico - Pt. 2: control function generator

DAB — Tue, 07 Nov 2023 20:46:32 GMT

Good work Jan, testing as it should be done.

RE: Automate Measuring the Analogue Front-end of Data Acquisition Board for Pi Pico - Pt. 1: test setup

DAB — Tue, 07 Nov 2023 20:43:34 GMT

Looks like a good set up.

This was the type of testing LabVIEW was made for.

RE: Automate Measuring the Analogue Front-end of Data Acquisition Board for Pi Pico - Pt. 2: control function generator

Jan Cumps — Tue, 07 Nov 2023 18:50:25 GMT

Step 3 pre-tested

[View:/cfs-file/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-a60e5317-271c-4b14-9ff6-a5b93eee45c5/20231107_5F00_194632.mp4:640:360]

1 5V supply power

2 3.3V supply power

3 AIN_1 test voltage input

4 AIN1_P opamp U1D out output

5 AIN1_N opamp U1B out virtual ground

RE: Automate Measuring the Analogue Front-end of Data Acquisition Board for Pi Pico - Pt. 2: control function generator

shabaz — Sun, 05 Nov 2023 18:58:29 GMT

Impressive! It's easy to forget that a function generator can be used as a configurable voltage source like this. Nice to see all the programmableness with LabView being used to create the testbed!

RE: Automate Measuring the Analogue Front-end of Data Acquisition Board for Pi Pico - Pt. 1: test setup

Jan Cumps — Sun, 05 Nov 2023 18:03:56 GMT

[mention:a60e5317271c4b149ff6a5b93eee45c5:f7d226abd59f475c9d224a79e3f0ec07]

RE: Automate Measuring the Analogue Front-end of Data Acquisition Board for Pi Pico - Pt. 1: test setup

Jan Cumps — Sun, 05 Nov 2023 16:36:09 GMT

First part done:

[View:/cfs-file/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-2ca98898-77b7-4659-9517-8871f7807783/20231105_5F00_172752.mp4:640:360]

RE: Automate Measuring the Analogue Front-end of Data Acquisition Board for Pi Pico - Pt. 1: test setup

scottiebabe — Sun, 05 Nov 2023 15:40:22 GMT

EEVBlog tech tip [emoticon:9b06bfad0e6a482e801e5eb8fd9025d6]

RE: Lesson 5 - How Arrays Work in LabVIEW

gordonmx — Mon, 11 Sep 2023 05:18:55 GMT

A little harder, but 5 down, 5 to go

RE: Lesson 4 - How Sub VIs Work in LabVIEW

gordonmx — Mon, 11 Sep 2023 05:07:18 GMT

4 down, 6 to go

RE: Lesson 10 - LabVIEW and the Raspberry Pi Pico Using the SCPI labTool

cbohra00627 — Sun, 10 Sep 2023 12:36:48 GMT

This was a nice series of tutorials. Enjoyed the quizzes too!

RE: Lesson 2 - How Dataflow Programming Works in LabVIEW

gordonmx — Thu, 07 Sep 2023 19:54:19 GMT

2 down, 8 to go

RE: Lesson 1 - Introduction to the LabVIEW Programming Environment

gordonmx — Thu, 07 Sep 2023 19:53:32 GMT

One down, 9 to go

RE: Lesson 10 - LabVIEW and the Raspberry Pi Pico Using the SCPI labTool

Jan Cumps — Tue, 22 Aug 2023 16:49:05 GMT

You can find the 2 downloads we are using in the video, at the end of the detailed discussion that Randall mentions. In the Downloads section.
You will also find the documentation of the LabVIEW driver components there, and the SCPI commands reference.
If you use the driver, there's no need to learn the Pico SCPI labTool SCPI commands. The Virtual Instrument (VI) blocks will handle that for you.

Example: read a Pico analogue input:

RE: Lesson 10 - LabVIEW and the Raspberry Pi Pico Using the SCPI labTool

shabaz — Mon, 21 Aug 2023 19:00:54 GMT

One would struggle to say "Candyman" much more than 150 times, compared to how long it takes to create and use the Pico SCPI labTool with LabVIEW..

This was in real-time, no steps shortened.

It takes longer to make coffee!