LabVIEW Challenge Blogs - All Comments

RE: Setting up the Raspberry Pi Pico & accessing with Labview

MarAgoto — Wed, 13 Mar 2024 14:46:47 GMT

Great. Thank you!

RE: Winner's Announcement for the LabVIEW and Test Automation Beginner's Course

maxpowerr — Sun, 03 Dec 2023 14:24:13 GMT

Congratulations to the winners, after this competition I became interested in LabVIEW.

RE: Winner's Announcement for the LabVIEW and Test Automation Beginner's Course

Andrew J — Sun, 03 Dec 2023 11:43:07 GMT

Many thanks to the Judges for taking the time to review these projects.

RE: Winner's Announcement for the LabVIEW and Test Automation Beginner's Course

rsjawale24 — Fri, 01 Dec 2023 16:50:00 GMT

Congratulations guys! Amazing projects!

RE: Winner's Announcement for the LabVIEW and Test Automation Beginner's Course

baldengineer — Fri, 01 Dec 2023 15:36:10 GMT

Very cool. What a great set of projects to dive into and understand LabVIEW better!

Excellent job everyone.

RE: Winner's Announcement for the LabVIEW and Test Automation Beginner's Course

flyingbean — Fri, 01 Dec 2023 03:10:47 GMT

Congratulation to andrewj. A lot of essential materials for testing automation framework projects. Congratulations to all the winners and participants. Great learning experiences.

RE: Winner's Announcement for the LabVIEW and Test Automation Beginner's Course

scottiebabe — Thu, 30 Nov 2023 23:37:19 GMT

Awesome projects and great work [mention:acaf6a9338de4eef8f6717d5561ed01d:e9ed411860ed4f2ba0265705b8793d05] with the pico tool.

RE: Winner's Announcement for the LabVIEW and Test Automation Beginner's Course

dougw — Thu, 30 Nov 2023 23:21:18 GMT

Congratulations to the participants. You have gained new skills and made a nice contribution to the content here.

RE: Winner's Announcement for the LabVIEW and Test Automation Beginner's Course

shabaz — Thu, 30 Nov 2023 22:28:45 GMT

Congratulations everyone! Great projects and truly impressive work.

RE: Winner's Announcement for the LabVIEW and Test Automation Beginner's Course

misaz — Thu, 30 Nov 2023 21:15:48 GMT

Congratulations to eveyone. Very nice projects! [emoticon:c4563cd7d5574777a71c318021cbbcc8]

RE: Winner's Announcement for the LabVIEW and Test Automation Beginner's Course

kmikemoo — Thu, 30 Nov 2023 20:42:33 GMT

Congratulations to the winners! Great projects.

RE: Winner's Announcement for the LabVIEW and Test Automation Beginner's Course

DAB — Thu, 30 Nov 2023 20:13:58 GMT

Congratulations to eveyone.

Labview is an amazing piece of software.

RE: Final Project Blog # Air Quality Index (AQI) Test and Automation

swathic — Fri, 10 Nov 2023 06:51:05 GMT

Final Video on LabView and Raspberry PI PICO is done.

RE: PicoLab_EnvMonitor : a learning journey on LabVIEW - Final

flyingbean — Thu, 09 Nov 2023 04:39:22 GMT

I got some feedback from Jan Cumps about the LabVIEW projects I did. I would like to share the updated project: NTC thermal sensor controlled FAN system.

1. I split the VISA resource into two blocks in my previous flow. I did notice that. I knew it would not do good things for the project. However, I did not know why. The overall project still functioned as expected, so I decided to push the split VISA source with two "close" blocks at the final blog. I would like to listen the feedback about that. Jan Cumps did find the non-ideal flow on the LabVIEW projects. Good catch.

Here is the original Jan's comments:

little watch-out: you split the VISA resource to two blocks in your flows, and then end both branches with a Close block.

It's the same single VISA resource, you should only close it once. Either join the two branches at the end, or only continue one and close it.

2. I updated LabVIEW project after Jan's feedback as this:

and

3. Updated NTC short breadboard circuit into a soldering prototype circuit. I like soldering prototype circuits for the bench testing. I did find some time last weekend and updated the NTC thermal sensor circuit with copper paper, SMD resistors/capacitors and 30 gauge wires as below:

The copper paper really helped with overall prototype circuit routing.

Here is the updated NTC/FAN LabVIEW bench testing:

and

It took me two iterations to build the updated NTC thermal sensor circuit with copper paper and SMD parts.

RE: LabVIEW example: create DC inputs with a function generator

Jan Cumps — Wed, 08 Nov 2023 19:00:44 GMT

And this is an example of a test flow using that process:

[View:https://youtu.be/pXX_Shc9aQI:1280:720]