https://community.element14.com/products/devtools/ni-labview/Watch tutorials, videos, and technical articles, and collaborate with experts on ni's LabView , supporting test, measurement, and control, as well as giving users easy access to hardware and data insights.en-USTelligent Community 12https://community.element14.com/products/devtools/ni-labview/w/quizFri, 31 May 2024 21:22:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:ecbb1b58-6a5d-4e31-99ea-51b92c80da78Quizhttps://community.element14.com/products/devtools/ni-labview/w/quizFri, 31 May 2024 14:39:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:e6982887-b378-45a4-bd7e-f278898e9800pchanhttps://community.element14.com/products/devtools/ni-labview/f/forum/54607/avnet-accelerometer-4030-002-120/221365Fri, 10 May 2024 22:48:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:7d799b75-8983-4a6d-9fa9-13ae6a3167c0dougwThis sensor has analog outputs. Labview has all kinds of analog input capability. On the 2 g range the output is 1g per volt with 0.6 mV rms noise. So you would hit the noise floor at about 0.1 milli-g. To read this low (0.6 mV) Labview would need an A/D with about 14 bit resolution and accuracy.https://community.element14.com/products/devtools/ni-labview/f/forum/54607/avnet-accelerometer-4030-002-120Fri, 10 May 2024 20:19:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:2addce61-1420-405e-b141-d3158d30572djimmy_almacIs this avnet accelerometer (part number: 4030-002-120) compatible with labview? Also, how do I determine the minimum reading it is capable of?accelerometerhttps://community.element14.com/products/devtools/ni-labview/f/forum/54377/labview-community-edition-2024-q1-releasedWed, 21 Feb 2024 19:03:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:41686a4e-cb90-4063-8dd3-af19e7e48d7aJan CumpsDownloadable from https://www.ni.com/en/support/downloads/software-products/download.labview.html#521715 You need an NI account. And use the same account to download and activate. If you have an existing community license, and activation fails, you may need to extend it here: https://www.ni.com/myni/products/en/labview