https://community.element14.com/products/devtools/product-pages/Development Tool Product Pages published from our CMSen-USTelligent Community 12https://community.element14.com/products/devtools/product-pages/w/documents/21441/chipkit-piTue, 02 Dec 2025 18:25:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:e0dab33f-e186-4952-a1ee-3c7fe4d518eae14-publisherChipkit Pi Manufactured By: Embest Part Number: CHIPKIT PI Buy Now The chipKIT™ Pi is the latest Arduino™ compatible chipKIT™ platform from Microchip and element14 specially designed for Raspberry Pi. It features a 32-bit PIC32MX2xx microcontroller in a prototyping-friendly, low pin count SPDIP package. The PIC32’s performance, memory and integrated peripherals allow users to create applications including touch sensing, audio processing and advanced control. The board is supported by the free chipKIT™ Multi-Platform IDE (MPIDE) that can be hosted on the Raspberry Pi and allows users to create, compile and program Arduino sketch-based chipKIT™ applications within the Raspberry Pi operating system. This software development was completed by voumnteers from the chipKIT™ and Arduino communities. chipKIT™ Pi is the world’s first to enable the development of 3.3V Arduino compatible applications for the Raspberry Pi using a 32-bit, high-performance PIC32 MCU in a prototyping-friendly package. Because the Raspberry Pi’s processor is a 3.3V chip, its digital I/O and communications (I2C™, UART, SPI) pins require 3.3V. Hence the existing prototyping-friendly Arduino boards, which are all based on 5V 8-bit MCUs, require users to create or purchase additional components to translate the voltages. The chipKIT™ Pi can interface directly to the Raspberry Pi I/O Expansion header without any additional components, reducing both cost and design complexity. The chipKIT™ development platform is an open-source hardware and software solution intended for beginners and users with little or no knowledge of embedded controllers wanting to explore embedded applications. The chipKIT™ environment advances the art of open-source, physical computing by expanding support to more chip platforms and introducing new, high-performance libraries. It combines low-cost hardware with free software that is fast, powerful, and extendable. Key Applications: Touch sensing, audio processing and advanced control. Features Designed exclusively for the Raspberry Pi and Arduino ecosystems Features a Microchip 32-bit PIC32 microcontroller (MCU) in a prototyping-friendly, low pin count SPDIP package Supports the chipKIT™ Multi-Platform IDE (MPIDE) MPIDE is open source and compatible with the Arduino programming language and development environment Allows users to create, compile and program Arduino sketch-based chipKIT™ applications within the Raspberry Pi operating system Enables the development of 3.3V Arduino compatible applications for the Raspberry Pi using PIC32 MCU Ships With chipKIT Pi Board Only Required Tools Accessory Tools Documents General Safety Instruction for chipKIT Pi (pdf) Quick Start Guide Quick Start Guide for ChipKit Pi (pdf) Downloads Image Package Raspbian microSD Image with ChipKit Pi MPIDE (7z) SDK ChipKit Pi MPIDE Raspbian armhf (zip) Schematics/Layout Files Schematic File for ChipKit Pi (pdf) Training Video Training Video on ChipKit Pichipkitprimary_platformsmcudevelopment_platforms_kitsembesthttps://community.element14.com/products/devtools/product-pages/w/documentsTue, 02 Dec 2025 18:25:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:b50c3e73-af68-4512-991d-f7439f22d626Product Detail Documentshttps://community.element14.com/products/devtools/product-pages/w/documents/71962/infineon-s-psoc-4100t-plus-prototyping-kitFri, 29 Aug 2025 12:50:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:acfae5c3-80e5-424a-9212-9775db40ac92e14-publisherInfineon's PSOC ™ 4100T Plus Prototyping Kit Manufactured By: Infineon Technologies Part Number: CY8CPROTO-041TP Buy Now Description The PSOC™ 4100T Plus Prototyping Kit for PSOC™ 4100T Plus MCU (CY8CPROTO-041TP ) is powered with Infineon's 5th Gen CAPSENSE™ technology. The PSOC™ 4100T Plus MCU offers advanced sensing capabilities and enables enhanced HMI and system control in a single chip. The kit offers a complete, out-of-the-box experience, allowing users to explore and assess the capabilities of Infineon’s 5th-generation CAPSENSE™ and Multi-Sense technology. The kit enables developers to create and test applications that leverage self/mutual capacitance sensing technologies. As part of this road test, we are also looking for testers to leverage interchangeable expansion cards found in a separate PSOC 4000T kit while road testing the new PSOC 4100T Plus prototyping kit. You will receive 2 kits, one for the product being reviewed (CY8CPROTO-041TP), and a separate kit (CY8CPROTO-040T-MS) which will include the relevant expansion cards, including: a hover touch board, liquid level sensing board, and some metal touch boards. You will use these expansion cards to attach to your PSOC 4100T Plus prototyping kit (CY8CPROTO-041TP) for expanded testing of hover, metal and liquid level sensing. In the Modus Toolbox, CY8CPROTO-041TP based example codes are available for these expansion boards, for easier plug and play. Features CY8C4147AZQ-T495 MCU ALS sensor-based ADC measurements Self capacitive trackpad Mutual capacitive trackpad Self capacitive touch button capacitive touch button Proximity sensor Expandable connector for custom board User input button User LEDs with PWM capabilites Type-C USB connection ModusToobox™ BSP support Benefits Easy to use prototyping kit Expandable connector Easy evaluation of CAPSENSE™ Expandable for inductive sensing Expandable for liquid level sensing Expandable for CAPSENSE™ Hover Touch Access to multiple I/Os CY8CPROTO-041TP Kit Contents Prototyping Board CY8C4147AZQ-T495 Quick Start Guide 3mm Add-On Overlay Kit page: https://www.infineon.com/evaluation-board/CY8CPROTO-041TP#documents CY8CPROTO-040T-MS Kit Contents Prototyping Board (CY8CPROTO-040T-MS) – NOTE: this board will NOT be used in this road test, but we encourage you to engage with it separately! Hover Touch board (expansion board can be used) Liquid Level sensing board (expansion board can be used) Metal Touch boards (expansion board can be used) Ships With Infineon's PSOC™ 4100T Plus Prototyping Kit Required Tools Accessory Tools Documents Data Sheet PSOC 4100T Plus product page Getting Started ModusToolbox Set Up ModusToolbox Software Release Notes Product Brief/Fact sheet Product BriefRoadTestinfineonproduct reviewe14-infineonCY8CPROTO-041TPEngineer reviewroadtest reviewmcuPower engineerdevelopment_platforms_kitshttps://community.element14.com/products/devtools/product-pages/w/documents/71958/the-weller-micro-soldering-kit-and-filtration-unitThu, 21 Aug 2025 12:12:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:f454420c-423a-42a5-9888-9affd36a9cc7e14-publisherThe Weller Micro Soldering Kit and Filtration Unit Manufactured By: Weller Part Number: T0053448699 Buy Now The T0053448699 is a 1-channel, 95W, 230V micro soldering kit. With extremely fast heat-up and recovery times, it handles all tasks effortlessly. No more juggling tools or compromising performance – just reliable versatility and unmatched value Filtration Unit Description The FT91026699 is a ZeroSmog Guard 2 Kit2 ALFA dual-user filtration unit kit. Breathe easily while working with the Weller Zero Smog Guard, the quietest filtration unit on the market. This superior unit keeps your workspace clean, quiet, and refreshed. Its compact design fits conveniently under the operator's bench, ensuring it doesn't take up valuable space. The Weller Zero Smog Guard prioritizes your health, allowing you to focus on your tasks without worrying about air quality. Enhance your work environment and protect your well-being with this efficient and reliable fume extraction solution. Let Weller Zero Smog Guard help you maintain a healthier, more comfortable workspace all day long. It provides superior air quality through high-efficiency filtration of soldering particles and gases with a large filtering surface (H13 HEPA particle filter, activated carbon, and potassium permanganate). Features Micro Soldering Kit Graphical backlit LCD display Lock function, offset stackable units Connectable to ZeroSmog fume extraction unit Extremely short heating time of 5sec ESD safe Dimension of soldering station is L x W x H (mm) 150 x 130 x 101 Contents ZeroSmog Guard 2 (230V), 1 x main filter (HEPA H13 and activated carbon + potassium permanganate), 5 x prefilters, 2 x ALFA nozzle, 2 x hose 0F10, 2 x WFVsShut-off valve, 2 x 3m flexible hose Filtration Unit Clean & healthy air, superior experience, ESD safe Lowest noise level on the market ensures a healthy, pleasant, and comfortable working environment Saves space with a compact, under-the-bench design ideal for dual-user use Powerful extraction, maximum control 200m³/h maximum capacity, 2250Pa/V maximum vacuum less than 55dBA noise level (distance 1m) 142W (220-240V) power, (220-240V) 50/60Hz voltage Low maintenance, easy-to-reach on/off switch Quiet lowest noise level on the market Dimension L x W x H is 270 x 336 x 435mm Contents ZeroSmog Guard 2 (230V), 1 x main filter (HEPA H13 and activated carbon + potassium permanganate), 5 x prefilters, 2 x ALFA nozzle, 2 x hose 0F10, 2 x WFVsShut-off valve, 2 x 3m flexible hose. Ships With Weller Micro Soldering Kit and Filtration Unit Required Tools Accessory Tools Documents Data Sheet Micro Soldering Kit Datasheet Filtration Unit DatasheetMicro soldering kitRoadTestwellerproduct reviewEngineer reviewmcuFiltration Unitdevelopment_platforms_kitshttps://community.element14.com/products/devtools/product-pages/w/documents/71952/adi-voyager-4-wireless-vibration-eval-kit-with-edge-aiWed, 23 Jul 2025 12:27:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:45ae15b5-35c0-4bbe-abb2-d3e562899004e14-publisherADI Voyager 4 Wireless Vibration Eval Kit with Edge AI Manufactured By: Analog Devices Part Number: EV-CBM-VOYAGER4-1Z Buy Now The Voyager4 uses triaxial, digital-out, MEMS sensors, including the ADXL382 and ADXL367. The design also includes the MAX32666 BLE and MAX78000 AI microcontrollers. Flexible and PCB area-efficient PMIC power devices have been added as load switches for enhanced wireless sensor power savings. A BLE 5.3 Adapter with Antenna is included in every Voyager4 kit. Voyager4 uses BLE which makes it compatible with any PC with a Bluetooth Radio, but to ensure optimal performance and range, using the adapter when communicating with Voyager4 is recommended. Modes of Operation The solution operates in two modes: Data Collection/Streaming mode – In this mode, the data is sent to the Host PC for AI model development. Normal Operation/AI mode – In this mode, the anomaly alert is sent to the Host PC and user can decide to gather more ADXL382 data. Features The MEMS-based Wireless Vibration Monitoring Platform is a complete evaluation solution that includes: Intelligent, smarter, and secure decisions at the EDGE Decision making at the edge reduces network overhead and improves battery life Mechanical mounting and measurement capability up to 8 kHz bandwidth 3-axis ultra-low power, ultra-low noise MEMS accelerometer technology Ultra-low power microcontroller and robust low power Bluetooth Low Energy (BLE) technology Capabilities The Voyager4 enables users to do the following: Develop and deploy artificial intelligence at the EDGE Rapidly deploy a wireless solution to a machine or test setup Evaluate ADI MEMS sensor technology for vibration monitoring Evaluate ADI BLE technology for industrial wireless sensing Accelerate asset monitoring and solution development Evaluate and develop EDGE AI solutions for industrial condition-based monitoring Ships With Voyager 4 Wireless Vibration Eval Kit Required Tools Accessory ToolsRoadTestproduct reviewadie14-voyagerEngineer reviewEV-CBM-VOYAGER4-1Zanalog devicesmcudevelopment_platforms_kitsanalog_deviceshttps://community.element14.com/products/devtools/product-pages/w/documents/71951/the-nordic-thingy-91-xWed, 23 Jul 2025 12:03:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:37cd3562-7582-4f64-9eed-3e845e3de039e14-publisherThe Nordic Thingy:91 X Manufactured By: Nordic Semiconductor Part Number: THINGY91X Buy Now The Nordic Thingy:91 X is a versatile prototyping platform designed for the development of cellular IoT applications. It is built around the nRF9151 System-in-Package (SiP) which supports LTE-M, NB-IoT, GNSS, and NR+, making it suitable for global use. This platform is particularly ideal for asset-tracking applications due to its capability to utilize multiple location tracking methods including cellular, Wi-Fi, and GNSS in conjunction with nRF Cloud Location Services. The device is also equipped with a comprehensive array of sensors that monitor environmental conditions and movement, enhancing its utility in various IoT applications. To facilitate development and customization, the Nordic Thingy:91 X includes expansion options through a debug board connector and an expansion board connector compatible with Qwiic, STEMMA QT, and Grove systems. User interaction is enabled via two programmable buttons and visual feedback is provided through RGB LEDs. Connectivity features include a USB interface powered by the nRF5340 System-on-Chip (SoC), which also supports Bluetooth Low Energy (LE) for specific use cases. Additionally, the nRF7002 Wi-Fi companion IC enhances Wi-Fi location capabilities, complementing the robust connectivity options provided by the dual antennas for LTE and GNSS. The device is designed to be immediately operational with minimal setup, as it comes bundled with SIM cards from Onomondo and Wireless Logic, preloaded with data. This allows for an easy connection to the nRF Cloud right out of the box. Power management is efficiently handled by the nPM6001 and nPM1300 PMICs, with the latter also providing battery charging and fuel gauging functionalities. The included 1350 mAh Li-Po battery supports extended field testing, making the transition from prototype to field deployment smoother. The Nordic Thingy:91 X utilizes nRF Cloud, an IoT-optimized cloud service that integrates seamlessly with the device. It supports nRF Cloud Location Services, which offer efficient location data computation. The device’s firmware, developed using the nRF Connect SDK, is open source and can be customized to meet specific needs. It facilitates secure data transmission from Thingy:91 X to nRF Cloud, where it can be accessed through a user-friendly interface. The nRF Connect SDK provides a comprehensive toolkit for developers working with Nordic Semiconductor devices. It includes the Zephyr RTOS, various samples, networking protocols, libraries, and hardware drivers, all essential for cellular IoT development. This SDK is crucial for leveraging the full capabilities of the Nordic Thingy:91 X in developing cutting-edge IoT solutions Ships With Prototyping board nRF9151, 1350mAh rechargeable Li-polymer battery. Required Tools Accessory Tools Documents Data Sheet Nordic Thingy:91 X DatasheetThingy91XRoadTestproduct reviewEngineer reviewnordicroadtest reviewnordic semiconductormcudevelopment_platforms_kitse14-nordichttps://community.element14.com/products/devtools/product-pages/w/documents/71943/arduino-giga-display-bundleTue, 22 Jul 2025 08:59:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:890601ce-181c-4b45-8e76-e01ce12b57fbe14-publisherArduino GIGA Display Bundle Manufactured By: Arduino Part Number: ASX00039 Buy Now Introducing the Arduino GIGA R1 WiFi and GIGA Display Shield Bundle, a dynamic duo that empowers makers, gamers, artists, and tech enthusiasts to take their projects to new heights. Arduino GIGA R1 WiFi : The Arduino GIGA R1 WiFi is a game-changer for those with big ideas on a budget. Tailored for ambitious makers, this board levels the playing field by packing advanced features into an accessible component. With the same form factor as the popular Mega and Due, the GIGA R1 WiFi is the perfect choice for individuals ready to step up their tech game. Explore its capabilities and unleash your creativity, whether you're into gaming, sound design, or any tech-driven pursuit. The GIGA R1 WiFi opens doors for innovation, making advanced features easily accessible. Arduino GIGA Display Shield: Complementing the GIGA R1 WiFi is the Arduino GIGA Display Shield—a revolutionary touch screen solution that effortlessly deploys graphic interfaces to your projects. This shield features a digital microphone, 6-axis IMU, and Arducam® connector, providing a comprehensive toolset for creating handheld devices or interactive dashboards with ease. Take advantage of the seamless integration between the GIGA R1 WiFi and the Display Shield to bring your visions to life. Whether you're building interactive art installations, smart devices, or innovative gadgets, the GIGA Display Shield adds a new dimension to your projects. Unleash Creativity, Seamlessly: Combine the power of the Arduino GIGA R1 WiFi and GIGA Display Shield to unlock a realm of possibilities. This bundle is your ticket to a world where innovation knows no bounds, offering advanced features within reach for creators ready to turn their dreams into reality. Ships With GIGA Display Shield Required Tools Accessory Tools Documents Data Sheet Datasheet Arduino GIGA Display Shield Datasheet Arduino GIGA R1 WiFi Schematics Schematics Arduino GIGA Display Shield Schematics Arduino GIGA R1 WiFiRoadTestproduct reviewbx00063ASX00039roadtest reviewaEngineer reviewArduino GIGA Display Bundlee14-arduinoarduino giga r1 wifimcudevelopment_platforms_kitsarduinohttps://community.element14.com/products/devtools/product-pages/w/documents/71928/nxp-frdm-development-boardThu, 19 Jun 2025 09:38:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:7c3ef1ec-725b-4fe9-a44a-1dcb56804216e14-publisherNXP FRDM Development Board Manufactured By: NXP Part Number: FRDM-MCXN947 Buy Now The FRDM-MCXN947 is a FRDM development board for MCX N94/N54 MCUs. It is a compact and scalable development boards for rapid prototyping of MCX N94 and N54 MCUs. It offers industry standard headers for easy access to the MCU’s I/Os, integrated open-standard serial interfaces, external flash memory and an on-board MCU-Link debugger. Features MCX-N947 dual Arm cortex® -M33 cores at 150MHz each with optimized performance efficiency Up to 2MB dual-bank flash with optional full ECC RAM, External flash Accelerators: neural processing unit, PowerQuad, smart DMA etc HS USB Type-C connectors, SPI/I²C/UART connector, WIFI connector, CAN-FD transceiver On-board MCU-Link debugger with CMSIS-DAP, JTAG/SWD connector P3T1755 I3C/I²C temperature sensor RGB user LED, plus reset, ISP, wakeup buttons Ships With FRDM-MCXN947 board Quick start guide USB cable Type-C Required Tools Accessory Tools Documents Data Sheet Datasheet User Manual/Guide User ManualRoadTestproduct reviewMCX SeriesEngineer reviewnxpFRDM-MCXN947roadtest reviewmicrocontrollermcunxpdevelopment_platforms_kitsNXP-e14FRDM development boardhttps://community.element14.com/products/devtools/product-pages/w/documents/22004/frdm-keazxx-development-boardMon, 16 Jun 2025 14:55:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:930168e4-4cc5-4555-9cc5-443ad261e37ce14-publisherFRDM-KEAZxx Development Board Manufactured By: NXP FRDM-KEA128 Freedom Board supporting CAN and LIN Communication FRDM-KEAZ128Q80 Buy Now FRDM-KEA64 Freedom Board supporting CAN and LIN Communication FRDM-KEAZ64Q64 Buy Now FRDM-KEA32 Freedom Board supporting LIN Communication FRDM-KEAZN32Q64 Buy Now Rapidly develop & prototype your Ultra-Reliable applications The Freedom development platform is a small, cost effective evaluation and development system for quick application prototyping and demonstration of Ultra-Reliable Industrial and Automotive Microcontroller (MCU) families. Each platform offers an easy-to-use mass-storage device mode flash programmer, virtual serial port and classic programming and run-control capabilities. Available as: KEAZ128, KEAZ64 and KEAZ32 The Freedom development platform is a small, cost effective evaluation and development system for quick application prototyping and demonstration of Ultra-Reliable Industrial and Automotive Microcontroller (MCU) families. Each platform offers an easy-to-use mass-storage device mode flash programmer, virtual serial port and classic programming and run-control capabilities. Features Supports KEAZ128, KEAZ64 and KEAZN32 MCUs KEA is 5V, qualified to Automotive Grade 1 and -40 to 125 °C Small form factor size supports up to 6” x 4” Platform supports scalability up to 176 pins Arduino™ UNO footprint-compatible with expansion “shield” support Integrated open-standard serial and debug adapter (OpenSDA) with support for several industry-standard debug interfaces Easy access to the MCU I/O header pins for prototyping On-chip connectivity for CAN, LIN, UART/SCI and SPI Potentiometer for precise voltage and analog measurement RGB LED Two push-button switches (SW2 and SW3) Flexible power supply options microUSB or external 12V power supply Similar hardware across ARM®, S12 and Power Architecture®architecture based MCUs Ships With Freedom board USB Cable URL to online Quick Start Guide (QSG) Complimentary IDE Software KDS and S32 Design Studio Required Tools Accessory Tools Documents Data Sheet KEA128 Sub-Family Data Sheet (pdf) Product Brief/Fact sheet Freedom FRDM-KEA Development Platform Factsheet (pdf) Quick Start Guide Quick Start Guide (QSG) for FRDM-KEAZ128, FRDM-KEAZ64 and FRDM-KEAZN32 (pdf) User Manual/Guide Software Installation Guide for S32 Design Studio IDE (S32DS): FRDM-KEAZ128Q80, FRDM-KEAZ64Q64 and FRDM-KEAZN32Q64 (pdf) Downloads Bill of Materials FRDM-KEAZ128Q80 BOM file (zip) Design Package LIN2.x and SAE J2602 Stack Package for KEA, S08/S12 Platforms 4.5.4 (zip) Drivers EEPROM Emulation Driver for KEA128 and KEA8 (exe) MSCAN Driver for Kinetis EA Devices (zip) Quickstart Package FRDM-KEA Quick Start Package (zip) Schematics/Layout Files FRDM-KEAZ128Q80 Schematic file (zip)KEAZ128Q80primary_platformsfrdm-keamcunxpdevelopment_platforms_kitsfreedom platformhttps://community.element14.com/products/devtools/product-pages/w/documents/71918/adi-trinamic-motor-drive-kitThu, 15 May 2025 10:24:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:a0d480ce-d50d-47da-8268-da99f90e1074e14-publisherADI Trinamic Motor Drive kit Manufactured By: Analog Devices Part Number: TMC9660-3PH-EVKIT Buy Now TMC9660-3PH-EVKIT Evaluation Kit, TMC9660, Smart Gate Driver, Motor Controller TMC9660-3PH-EVKIT is a set of one MCU board, Landungsbruecke, one Eselsbruecke, and one TMC9660-3PH-EVAL driver board. It allows for a quick and simple start within only minutes to make your motor turn, while still providing full access to all registers and full functionality and diagnostics. The TMC9660-3PH-EVKIT is part of the ADI Trinamic evaluation board system. It is a 70V/10A permanent magnet synchronous motor (PMSM)/brushless DC (BLDC) evaluation kit that allows evaluation of the TMC9660, which is a highly integrated monolithic motor controller and gate driver IC for three-phase BLDC motors, two-phase bipolar stepper motors, and DC motors. The TMC9660-3PH-EVAL focuses on the usage of three-phase BLDC motors with the possibility to use ABN encoders or digital Hall sensors as position feedback mechanisms. Additionally, the board allows simultaneous control of a brake chopper and an electromechanical brake through the otherwise unused fourth half-bridge. Features Three-phase PMSM/BLDC motors and DC motors up to 10A RMS coil current (20A peak) 8V to 70V DC single-supply voltage range Field-oriented controller (FOC) in hardware Position, velocity, and torque controller in hardware Brake chopper and electromechanical brake outputs SPI and UART interfaces for communication with a main controller Ships With Evaluation Board TMC9660 PC Interface Board Bridge Connection Board Required Tools Accessory Tools Documents Data Sheet DatasheetRoadTestproduct reviewtrinamic motor controlEngineer reviewroadtest reviewanalog devicesmcuE14-ADIdevelopment_platforms_kitsTMC9660-3PH-EV KITanalog_deviceshttps://community.element14.com/products/devtools/product-pages/w/documents/71908/stwinbx1-development-kitMon, 07 Apr 2025 13:45:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:01b2cc7b-8733-42ce-8486-771c6e75366de14-publisherSTWINBX1 Development Kit Manufactured By: STMicroelectronics Part Number: STEVAL-STWINBX1 Buy Now The STWIN.box (STEVAL-STWINBX1) is a development kit and reference design that simplifies prototyping and testing of industrial sensing applications in IoT applications such as condition monitoring and predictive maintenance. It is an evolution of the original STWIN kit (STEVAL-STWINKT1B) and features a higher mechanical accuracy in the measurement of vibrations, an improved robustness, an updated BoM to reflect the latest and best-in-class MCU and industrial sensors, and an easy-to-use interface for external add-ons. The many on-board industrial-grade sensors and the ultra-low power MCU enable applications that feature: ultra-low power, 9 DoF motion sensing, wide-bandwidth vibration analysis, audio and ultrasound acoustic inspection, very precise local temperature, and environmental monitoring. A rich set of software packages is available in source code. Optimized firmware libraries and a complete companion cloud application help to speed up the design cycle to develop end-to-end solutions. The kit supports a broad range of connectivity options, including the built-in RS485 transceiver, BLE, Wi-Fi, and NFC. The STWIN.box also includes a 34-pin expansion connector for small form factor daughter boards associated with the STM32 family, such as the STEVAL-C34KAT1 vibrometer and temperature sensors expansion board. The STWIN.box is suitable for field trials, demonstrations, and PoC for industrial IoT applications that use ST software and third-party software. Features Multisensing wireless platform for vibration monitoring and ultrasound detection Built around STWIN.box core system board with processing, sensing, connectivity, and expansion capabilities Ultra-low power Arm® Cortex®-M33 with FPU and TrustZone at 160 MHz, 2048kBytes Flash memory (STM32U585AI) MicroSD card slot for standalone data logging applications On-board Bluetooth® low energy v5.0 wireless technology (BlueNRG-M2), Wi-Fi (EMW3080) and NFC (ST25DV04K) Option to implement authentication and brand protection secure solution with STSAFE-A110 Wide range of industrial IoT sensors Expandable via a 34-pin FPC connector Ships With STWIN.box core system 480mAh LiPo battery Adapter for the ST-LINK debugger Plastic case Adapter board for DIL 24 sensors Flexible cable Required Tools Accessory Tools Documents Data Sheet Datasheet Quick Start Guide Quick Start Guide User Manual/Guide User Manualpredictive maintenanceRoadTestindustry 4.0product reviewAutomation engineerEngineer reviewindustrial sensingstmSTEVAL-STWINBX1E14-STMicroelectronicsmcustmicroelectronicsiotcondition monitoringdevelopment_platforms_kitshttps://community.element14.com/products/devtools/product-pages/w/documents/71903/psoc-control-c3m5-system-motor-control-kitMon, 24 Mar 2025 13:09:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:cd3864a8-97ee-48e2-b686-a56b0feeda15e14-publisherPSOC ™ Control C3M5 System Motor Control Kit Manufactured By: Infineon Technologies Part Number: KIT_PSC3M5_MC1 Buy Now The PSOC Tm Control C3M5 motor control card is an evaluation board designed to help engineers in developing PSOC Tm Control C3 based motor control solutions in combination with suitable power stage evaluation boards featuring the MADK connector (M1/M3/M5). The board features an isolated onboard debugger for programming and debugging over a USB interface. It also features a USB VCOM functionality using the same USB connection used for the debugger. Features PSOC Control C3M5 PSC3M5FDS2AFQ1 Connection to MADK boards (M1, M3, M5) On-board debugger (SEGGER J-Link LITE) 2 User LED - User-controlled LED 2 Debug LED & Aux LED - Debugger LEDs DB42S03 or DB42M03 Brushless DC motor 24V/1A AC/DC power adapter Benefits Out-of-the-box configuration Sensorless FOC motor control Can be configured to run two motors Code examples to shorten development Modular setup to adapt new power boards Ships With KIT_PSC3M5_CC2 motor control card Drive adapter card KITMOTORDC250W24VTOBO1 power board USB Type-A to USB Type-C cable Nanotec DB42S03 or DB42M03 24 V BLDC motor 24 V/1 A AC/DC power adapter Quick start guide Required Tools Accessory Tools Documents Getting Started Guide Quick Start Guide Press Release Release Notes User Manual/Guide User GuideRoadTestinfineonKIT_PSC3M5_MC1Infineon-e14Engineer reviewroadtest reviewmcuPower engineerdevelopment_platforms_kitsPSOC Control C3M5 System Motor Control Kithttps://community.element14.com/products/devtools/product-pages/w/documents/71887/rohm-logicoa-buck-converterMon, 27 Jan 2025 14:12:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:43cfe074-3dc0-44f6-87f1-d6f5fe6dc7b2e14-publisherROHM LogiCoA ™ BUCK Converter Manufactured By: ROHM Semiconductor Part Number: LOGICOA001-EVK-001 Buy Now LogiCoA001-EVK-001 is a reference design for a BUCK converter that uses ROHM's analog-digital fusion control technology LogiCoA Tm , which includes a microcontroller ML62Q2035 suitable for LogiCoA Tm , a 100V gate driver BD2320EFJ-LA, LDO BD950N1WG-C, BD900N1WG-C, operational amplifier BU7481SG, and shunt resistor LTR100LJZPFSR020. Design data, sample software, and an operating system for power supply control are available for this reference design, as well as a reference board. We hope that you will have a chance to experience the analog-digital fusion controlLogiCoA Tm and make use of it in your future power supply device development. LogiCoA Tm Power is a solution adopting analog-digital hybrid control to a switching power supply. This user’s guide will provide the steps necessary to operate the evaluation board of LogiCoA Tm Power Solution Synchronous buck DCDC converter, LogiCoA001-EVK-001. Bill of materials, operating procedures and application data are included. LogiCoA Tm is the brand granted to the design philosophy of integrating digital elements to maximize the performance of analog circuitry. By fusing the merits of analog circuits with digital control, it brings out the full potential of circuit topology and contributes to higher efficiency of power utilization. ROHM thinks that this LogiCoA Tm can be applied not only to the power supply field but also to the overall power solution as. We are looking at future applications for products and solutions. Features Microcontrollers for Power Supply Control (LogiCoA Tm Microcontroller): LogiCoA Tm Microcontrollers are suitable ones for power supply control with those analog-digital hybrid control is adopted and ML62Q2033/2035 and ML62Q2043/2045 are released. On this EVK, the ML62Q2035 is mounted. Operating System for Power Supply Control Microcontroller RMOS (Real time Micro Operating System). RMOS is a multi-task and real-time operating system developed to control switching power supplies and operates on ML62Q20xx group. Power Supply Application: Power Supply Applications are application circuits correspond to each power supply topology. On this EVK external components such as LDO, gate driver, operational amplifier, MOSFET inductor and so on are mounted as an application circuit of synchronous buck converter. Required Tools Accessory Tools Documents Application Note App Note: Analog-Digital Hybrid Power Supply Synchronous Buck DCDC Converter Operating Instructions App Note: Analog-Digital Hybrid Control Innovating Switching Power Supply Design App Note: Operating System for Switching Power Control MCU "RMOS" App Note: Serial communication of RMOS and GUI developing manual Reference Design Layout Schematics Schematic User Manual/Guide User GuideRoadTestproduct reviewEngineer reviewrohmroadtest reviewmcuLOGICOA001-EVK-001evaluation boardrohm_semiconductordevelopment_platforms_kitsrohm semiconductorhttps://community.element14.com/products/devtools/product-pages/w/documents/71886/arduino-nano-matterMon, 27 Jan 2025 13:37:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:d4059a48-f70f-4973-a182-2ea8335069fbe14-publisherArduino Nano Matter Manufactured By: Arduino Part Number: ABX00112 Buy Now Nano Matter merges Arduino’s signature ease of use with with the powerful Silicon Labs® MGM240S, wrapping the best of two worlds into one of the smallest form factors currently on the market. Experimenting with Matter-compatible devices has never been easier! With Nano Matter, makers – at all levels of expertise – can leverage the popular Matter IoT connectivity standard to build interactive solutions, upgrade previous Nano-based projects to fully function as smart home devices, and even experiment with protocols like Zigbee® and OpenThread. Benefits Matter-ready for quick prototyping, thanks to hardware support and a user-friendly software layer. Based on the MGM240SD22VNA from Silicon Labs, a 32-bit Arm® Cortex®-M33. Secure VaultTm technology: enjoy industry-leading, state-of-the art security from Silicon Labs against escalating IoT threats. Multiprotocol connectivity enables 802.15.4 (Thread) and Bluetooth® Low Energy Nano-family compact size and pinout. Debugging over USB via SWD interface: no external debugging probe needed! Low energy consumption, designed for battery powered IoT devices. Features Microprocessor: MGM240SD22VNA (32-bit Arm® Cortex®-M33 with DSP instruction and FPU) Connectivity: 802.15.4 (Thread), Bluetooth® Low Energy 5.3, Bluetooth® Mesh, Matter-ready Smart Home Connectivity Memory: 1536 kB Flash, 256 kB RAM USB Connector: USB-C® Security: Secure VaultTm High Debugging: Over USB UART: 2 I2C: 2 SPI: 2 Digital I/O: 22 Analog Inputs: 20 (12 bits resolution) DAC: 4 (8-12 bits resolution) PWM pins: 22 (A maximum of 5 pins simultaneously) External interrupts: Available within all Digital pins User Interface: On-board RGB LED, User pushbutton Circuit operating voltage: 3.3 V Input Voltage (VIN): 5 V Source Current per I/O Pin: 40 mA Sink Current per I/O Pin: 28 mA Clock Speed: 78 MHz Antenna On-board: 2.4 GHz Ships With Nano Matter Development Board MGM240SD22VNA Required Tools Accessory Tools Documents Data Sheet DatasheetRoadTestproduct reviewroadtest reviewshome automationEngineer reviewroadtest reviewABX00112InteroperabilitymcuNano MatterMultiprotocoldevelopment_platforms_kitsarduinohttps://community.element14.com/products/devtools/product-pages/w/documents/27859/avnet-dual-camera-high-speed-i-o-moduleMon, 23 Dec 2024 15:46:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:b644845c-9af2-42e9-8cf2-830e36fb2ee5e14-publisherAvnet Dual Camera High Speed I/O Module Manufactured By: Avnet Part Number: AES-ACC-DUALCAM-G Buy Now This high speed I/O module features two Rayprus IAS-compatible imaging modules based on imaging sensors from onsemi. These MIPI sensor modules interface to an AP1302 imaging coprocessor. This kit simplifies the complex process of developing with imaging sensors. MIPI-CSI2 is widely used in the consumer industry for high-speed communications from host processor to image sensors, but many image sensor modules have varying connector formats which can lead to difficulties with experimenting with different camera modules. The Imager Access System (IAS) image sensor module format from ON Semiconductor helps solve this problem and enables the following: Ease of Design-In: OEMs do not have to source lens or explore module vendors Decreases time to market by enabling low-touch design Prior imaging system expertise is not required since IAS is a plug-and-play solution The purpose of the IAS standard is to help any end-product or board designer to gain access to all image sensor modules that are compatible within the IAS standard. Required Tools Accessory Tools Documents Product Brief/Fact sheet Product Briefavnetvideo_encoderhigh speed ioaudio_videoZUBoardanalog_demo_boardsdual camera