MCF51QE128 Demonstration Board

e14-publisher — Fri, 05 May 2023 15:47:00 GMT

Current Revision posted to Documents by e14-publisher on 5/5/2023 3:47:00 PM

MCF51QE128 Demonstration Board

Manufactured By:NXP

Part Number:DEMOQE128

Buy Now

The DEMOQE128 is a low-cost development system designed for demonstrating, evaluating, and debugging the MC9S08QE128 and MCF51QE128 microcontrollers. The board supports two interchangeable plug-in daughter cards to quickly evaluate the 8-bit S08 and 32-bit ColdFire V1 QE128 microcontrollers.

Embedded Multilink circuitry on the DEMOQE128 board allows the microcontroller on the DEMOQE128 to be powered, programmed, and debugged via USB from the PC. In addition, the demo board contains an on-board logic analyzer and virtual serial port via USB to assist with rapid development.It also supports plug-in RF daughter cards for SMAC and 802.15.4.

Application development is quick and easy using P&E’s Embedded Multilink circuitry and the included software tools and examples. An optional BDM port is provided to allow use of an external BDM interface such as P&E’s Cyclone PRO automated programmer or USB Multilink. The USB Multilink is functionally comparable to the DEMOQE128’s Embedded Multilink circuitry.

Key Applications: Consumer, Industrial, Medical/Health Care, Networking and Connectivity (ZigBee, Modem).

Features

Interchangeable 8-bit S08 and 32-bit ColdFire V1 QE family daughter cards
P&E's USB Embedded Multilink circuitry eliminates the need for external BDM cable
- Allows for debug, programming, and power to board and device
- SCI signals connected to Multilink through jumpers for on-board virtual serial port
- TPM signals connected to Multilink through jumpers for on-board logic analyzer
On-board Logic Analyzer
On-board Virtual Serial Port
Asymmetrically positioned 4 8x2 male connectors for interchangeable daughter cards
RS-232 Serial Port w/ DB9-F Connector
SCI signals connected to P&E’s Embedded Multilink through jumpers
ON/OFF Power Switch w/ LED indicator
A 5VDC to 8VDC power supply input barrel connector
Power Input Selection Jumpers for selecting the input voltage source:
- Power Input from Embedded Multilink to LDO regulator
- Power Input from DC Power Jack to LDO regulator
- Regulated VDD Output at 3.0V
- Regulated VDD Output at 2.1V
- Power Input from Battery
- Power Input from MCU_PORT connector
RESET Push Button and LED indicator w/ Enable
Optional External Crystal Circuitry Layout (not populated)
User Features:
- 3-axis Accelerometer w/Enable
- 8 User LED’s w/ Enable
- 4 User Push Buttons w/ Enable
- 1 Piezzo Buzzer w/ Enable
- IIC Pullups w/ Enable
- 10K Ohm POT w/ Enable
Option Jumpers:
- COM_EN for 1.8V to 4.25V RS232 Transceiver
- TXD_EN for SCI_TXD to Embedded Multilink
- RXD_EN for SCI_RXD to Embedded Multilink
- INPUT_EN for two input channels to Embedded Multilink
Specifications:
- Board Size 3.5 x 4.0
Power Input:
- USB Cable: 5VDC, 500mA max
- DC Power Jack: 2.5/5.5mm barrel connector, 5VDC to 8VDC Center Positive
- Two AAA Battery Cells

Ships With

DEMOQE Base Board with a MC9S08QE128 Daughter Card installed
MCF51QE128 Daughter Card
DVD-Breaking Bit Boundaries:Getting Started With QE128
CodeWarrior for Microcontrollers V6.0 – Special Edition
Device and Board Resources
Device Training
2-cell AAA battery package
USB Cable
Quick Start Guide
NXP Warranty Card

Required Tools

Accessory Tools

Documents

Application Note

AN1208 - Application Note for µC/OS-II and µC/Probe for the Freescale MC9S08 on the DEMOQE Evaluation Board (pdf)

AN1251 - Application Note for µC/OS-II and µC/Probe For the Freescale MCF51QE128 (pdf)

AN3466 - Application Note for Differences Between a Cortex M3 Processor and the MCF51QE128 (pdf)

AN3467- Application Note for Using Processor Expert with Flexis Microcontrollers (pdf)

AN3506 - Application Note for Migration from TI MSP430 to 9S08QE128 or MCF51QE128 Flexis Microcontrollers (pdf)

Data Sheet

Data Sheet for MCF51QE128 Series (pdf)

Data Sheet for MC9S08QE128 Series (pdf)

Product Brief/Fact sheet

Low Power Brochure (pdf)

Product Brief for CodeWarrior Development Studio for Microcontrollers V6.3 (pdf)

Quick Start Guide

Quick Start Guide for DEMOQE128 (pdf)

Getting Started with Freescale Development Tools (pdf)

Reference Manual

Reference Manual for MCF51QE128RM: MCF51QE128 (pdf)

Reference Manual for MC9S08QE128, MC9S08QE96, MC9S08QE64 (pdf)

Downloads

Applications Library

DEMOQE128TOOLKIT - Software Package Tool Kit. (zip)

Schematics/Layout Files

DEMOQE128SCH - DEMOQE128 Schematic (zip)

Tags: MC9S08QE128, primary_platforms, mcu, mcf51qe128, qe128, nxp, development_platforms_kits

MCF51QE128 Demonstration Board

e14-publisher — Thu, 16 Dec 2021 23:19:55 GMT

Revision 3 posted to Documents by e14-publisher on 12/16/2021 11:19:55 PM

MCF51QE128 Demonstration Board

Manufactured By:NXP

Part Number:DEMOQE128

Buy Now

Key Applications: Consumer, Industrial, Medical/Health Care, Networking and Connectivity (ZigBee, Modem).

Features

Interchangeable 8-bit S08 and 32-bit ColdFire V1 QE family daughter cards
P&E's USB Embedded Multilink circuitry eliminates the need for external BDM cable
- Allows for debug, programming, and power to board and device
- SCI signals connected to Multilink through jumpers for on-board virtual serial port
- TPM signals connected to Multilink through jumpers for on-board logic analyzer
On-board Logic Analyzer
On-board Virtual Serial Port
Asymmetrically positioned 4 8x2 male connectors for interchangeable daughter cards
RS-232 Serial Port w/ DB9-F Connector
SCI signals connected to P&E’s Embedded Multilink through jumpers
ON/OFF Power Switch w/ LED indicator
A 5VDC to 8VDC power supply input barrel connector
Power Input Selection Jumpers for selecting the input voltage source:
- Power Input from Embedded Multilink to LDO regulator
- Power Input from DC Power Jack to LDO regulator
- Regulated VDD Output at 3.0V
- Regulated VDD Output at 2.1V
- Power Input from Battery
- Power Input from MCU_PORT connector
RESET Push Button and LED indicator w/ Enable
Optional External Crystal Circuitry Layout (not populated)
User Features:
- 3-axis Accelerometer w/Enable
- 8 User LED’s w/ Enable
- 4 User Push Buttons w/ Enable
- 1 Piezzo Buzzer w/ Enable
- IIC Pullups w/ Enable
- 10K Ohm POT w/ Enable
Option Jumpers:
- COM_EN for 1.8V to 4.25V RS232 Transceiver
- TXD_EN for SCI_TXD to Embedded Multilink
- RXD_EN for SCI_RXD to Embedded Multilink
- INPUT_EN for two input channels to Embedded Multilink
Specifications:
- Board Size 3.5 x 4.0
Power Input:
- USB Cable: 5VDC, 500mA max
- DC Power Jack: 2.5/5.5mm barrel connector, 5VDC to 8VDC Center Positive
- Two AAA Battery Cells

Ships With

DEMOQE Base Board with a MC9S08QE128 Daughter Card installed
MCF51QE128 Daughter Card
DVD-Breaking Bit Boundaries:Getting Started With QE128
CodeWarrior for Microcontrollers V6.0 – Special Edition
Device and Board Resources
Device Training
2-cell AAA battery package
USB Cable
Quick Start Guide
NXP Warranty Card

Required Tools

Accessory Tools

Documents

Application Note

AN1208 - Application Note for µC/OS-II and µC/Probe for the Freescale MC9S08 on the DEMOQE Evaluation Board (pdf)

AN1251 - Application Note for µC/OS-II and µC/Probe For the Freescale MCF51QE128 (pdf)

AN3466 - Application Note for Differences Between a Cortex M3 Processor and the MCF51QE128 (pdf)

AN3467- Application Note for Using Processor Expert with Flexis Microcontrollers (pdf)

AN3506 - Application Note for Migration from TI MSP430 to 9S08QE128 or MCF51QE128 Flexis Microcontrollers (pdf)

Data Sheet

Data Sheet for MCF51QE128 Series (pdf)

Data Sheet for MC9S08QE128 Series (pdf)

Product Brief/Fact sheet

Low Power Brochure (pdf)

Product Brief for CodeWarrior Development Studio for Microcontrollers V6.3 (pdf)

Quick Start Guide

Quick Start Guide for DEMOQE128 (pdf)

Getting Started with Freescale Development Tools (pdf)

Reference Manual

Reference Manual for MCF51QE128RM: MCF51QE128 (pdf)

Reference Manual for MC9S08QE128, MC9S08QE96, MC9S08QE64 (pdf)

Downloads

Applications Library

DEMOQE128TOOLKIT - Software Package Tool Kit. (zip)

Schematics/Layout Files

DEMOQE128SCH - DEMOQE128 Schematic (zip)

Tags: MC9S08QE128, primary_platforms, mcu, mcf51qe128, qe128, nxp, development_platforms_kits

MCF51QE128 Demonstration Board

e14-publisher — Thu, 16 Dec 2021 03:05:02 GMT

Revision 2 posted to Documents by e14-publisher on 12/16/2021 3:05:02 AM

MCF51QE128 Demonstration Board

Manufactured By:NXP

Part Number:DEMOQE128

Buy Now

Key Applications: Consumer, Industrial, Medical/Health Care, Networking and Connectivity (ZigBee, Modem).

Features

Interchangeable 8-bit S08 and 32-bit ColdFire V1 QE family daughter cards
P&E's USB Embedded Multilink circuitry eliminates the need for external BDM cable
- Allows for debug, programming, and power to board and device
- SCI signals connected to Multilink through jumpers for on-board virtual serial port
- TPM signals connected to Multilink through jumpers for on-board logic analyzer
On-board Logic Analyzer
On-board Virtual Serial Port
Asymmetrically positioned 4 8x2 male connectors for interchangeable daughter cards
RS-232 Serial Port w/ DB9-F Connector
SCI signals connected to P&E’s Embedded Multilink through jumpers
ON/OFF Power Switch w/ LED indicator
A 5VDC to 8VDC power supply input barrel connector
Power Input Selection Jumpers for selecting the input voltage source:
- Power Input from Embedded Multilink to LDO regulator
- Power Input from DC Power Jack to LDO regulator
- Regulated VDD Output at 3.0V
- Regulated VDD Output at 2.1V
- Power Input from Battery
- Power Input from MCU_PORT connector
RESET Push Button and LED indicator w/ Enable
Optional External Crystal Circuitry Layout (not populated)
User Features:
- 3-axis Accelerometer w/Enable
- 8 User LED’s w/ Enable
- 4 User Push Buttons w/ Enable
- 1 Piezzo Buzzer w/ Enable
- IIC Pullups w/ Enable
- 10K Ohm POT w/ Enable
Option Jumpers:
- COM_EN for 1.8V to 4.25V RS232 Transceiver
- TXD_EN for SCI_TXD to Embedded Multilink
- RXD_EN for SCI_RXD to Embedded Multilink
- INPUT_EN for two input channels to Embedded Multilink
Specifications:
- Board Size 3.5 x 4.0
Power Input:
- USB Cable: 5VDC, 500mA max
- DC Power Jack: 2.5/5.5mm barrel connector, 5VDC to 8VDC Center Positive
- Two AAA Battery Cells

Ships With

DEMOQE Base Board with a MC9S08QE128 Daughter Card installed
MCF51QE128 Daughter Card
DVD-Breaking Bit Boundaries:Getting Started With QE128
CodeWarrior for Microcontrollers V6.0 – Special Edition
Device and Board Resources
Device Training
2-cell AAA battery package
USB Cable
Quick Start Guide
NXP Warranty Card

Required Tools

Accessory Tools

Documents

Application Note

AN1208 - Application Note for µC/OS-II and µC/Probe for the Freescale MC9S08 on the DEMOQE Evaluation Board (pdf)

AN1251 - Application Note for µC/OS-II and µC/Probe For the Freescale MCF51QE128 (pdf)

AN3466 - Application Note for Differences Between a Cortex M3 Processor and the MCF51QE128 (pdf)

AN3467- Application Note for Using Processor Expert with Flexis Microcontrollers (pdf)

AN3506 - Application Note for Migration from TI MSP430 to 9S08QE128 or MCF51QE128 Flexis Microcontrollers (pdf)

Data Sheet

Data Sheet for MCF51QE128 Series (pdf)

Data Sheet for MC9S08QE128 Series (pdf)

Product Brief/Fact sheet

Low Power Brochure (pdf)

Product Brief for CodeWarrior Development Studio for Microcontrollers V6.3 (pdf)

Quick Start Guide

Quick Start Guide for DEMOQE128 (pdf)

Getting Started with Freescale Development Tools (pdf)

Reference Manual

Reference Manual for MCF51QE128RM: MCF51QE128 (pdf)

Reference Manual for MC9S08QE128, MC9S08QE96, MC9S08QE64 (pdf)

Downloads

Applications Library

DEMOQE128TOOLKIT - Software Package Tool Kit. (zip)

Schematics/Layout Files

DEMOQE128SCH - DEMOQE128 Schematic (zip)

Tags: MC9S08QE128, primary_platforms, mcu, mcf51qe128, qe128, nxp, development_platforms_kits

MCF51QE128 Demonstration Board

e14-publisher — Mon, 18 Oct 2021 20:13:36 GMT

Revision 1 posted to Documents by e14-publisher on 10/18/2021 8:13:36 PM

MCF51QE128 Demonstration Board

Manufactured By:NXP

Part Number:DEMOQE128

Buy Now

Key Applications: Consumer, Industrial, Medical/Health Care, Networking and Connectivity (ZigBee, Modem).

Features

Interchangeable 8-bit S08 and 32-bit ColdFire V1 QE family daughter cards
P&E's USB Embedded Multilink circuitry eliminates the need for external BDM cable
- Allows for debug, programming, and power to board and device
- SCI signals connected to Multilink through jumpers for on-board virtual serial port
- TPM signals connected to Multilink through jumpers for on-board logic analyzer
On-board Logic Analyzer
On-board Virtual Serial Port
Asymmetrically positioned 4 8x2 male connectors for interchangeable daughter cards
RS-232 Serial Port w/ DB9-F Connector
SCI signals connected to P&E’s Embedded Multilink through jumpers
ON/OFF Power Switch w/ LED indicator
A 5VDC to 8VDC power supply input barrel connector
Power Input Selection Jumpers for selecting the input voltage source:
- Power Input from Embedded Multilink to LDO regulator
- Power Input from DC Power Jack to LDO regulator
- Regulated VDD Output at 3.0V
- Regulated VDD Output at 2.1V
- Power Input from Battery
- Power Input from MCU_PORT connector
RESET Push Button and LED indicator w/ Enable
Optional External Crystal Circuitry Layout (not populated)
User Features:
- 3-axis Accelerometer w/Enable
- 8 User LED’s w/ Enable
- 4 User Push Buttons w/ Enable
- 1 Piezzo Buzzer w/ Enable
- IIC Pullups w/ Enable
- 10K Ohm POT w/ Enable
Option Jumpers:
- COM_EN for 1.8V to 4.25V RS232 Transceiver
- TXD_EN for SCI_TXD to Embedded Multilink
- RXD_EN for SCI_RXD to Embedded Multilink
- INPUT_EN for two input channels to Embedded Multilink
Specifications:
- Board Size 3.5 x 4.0
Power Input:
- USB Cable: 5VDC, 500mA max
- DC Power Jack: 2.5/5.5mm barrel connector, 5VDC to 8VDC Center Positive
- Two AAA Battery Cells