MPC563xM StarterTRAK Development Kit

e14-publisher — Fri, 05 May 2023 15:47:19 GMT

Current Revision posted to Documents by e14-publisher on 5/5/2023 3:47:19 PM

MPC563xM StarterTRAK Development Kit

Manufactured By:NXP

Part Number:TRK-MPC5634M

Buy Now

The NXP's TRK-MPC5634M board is part of the NXP StarterTRAK series, a development platform that enables rapid prototyping and tool re-use. Take your design to the next level and begin constructing with your StarterTRAK system today.

The TRK-MPC5634M is a low-cost development system supporting NXP MPC5634M microcontrollers in 144LQFP packages. The Embedded OSJTAG circuitry on the TRK-MPC5634M board allows the processor on the board to be debugged and programmed via USB from a PC. In addition, the demo board can be powered using the USB bus.

The TRK-MPC5634M is a demonstration and development system for NXP’s MPC5634M microcontrollers in 144LQFP packages. Application development is quick and easy using Embedded OSJTAG. An optional 14-pin JTAG port is provided to allow the use of an external Qorivva MPC55xx/56xx interface such as P&E’s USB Multilink or Cyclone MAX automated programmer.

P&E’s USB Multilink provides faster communication speeds and can be used to debug both the TRK-MPC5634M and the user’s own targets. The DEMO board’s Embedded OSJTAG is intended to function with the onboard processor only. It cannot be used to communicate with other devices.

The Qorivva MPC5634M family of 32-bit microcontrollers (MCUs) are feature-rich devices suitable for powertrain applications such as motorcycles, automotive 4 cylinder engine control and hybrid electric motors. These scalable Power Architecture® devices are supported by an enablement ecosystem that includes software drivers, operating systems and configuration code to help you quickly implement your designs.

Key Applications: Automotive powertrain and precision timed industrial applications

Features

MPC5634M Microcontroller in a 144LQFP package
On-board JTAG connection via open source OSBDM circuit using the MPC9S08JM microcontroller
MCZ3390S5EK system basis chip with advanced power management and integrated CAN transceiver
CAN & LIN Interface
Analog Interface with potentiometer
High- efficiency LEDs
SCI & SPI serial communication interface
Access to MCU pins with standard headers
On-board Virtual Serial Port
ON/OFF Power Switch w/ LED indicator
A 9VDC to 12VDC power supply input barrel connector
Power Input Selection Jumpers for selecting the input voltage source:
- Power Input from USB Connector
- Power Input from DC Power Jack
  - NXP MC3390x
Jumper to select BAM source:
- From internal memory
- From CAN
- From LIN Flex
RESET Push Button and LED indicator w/ enable
User Features:
- 4 User Push Buttons w/ enable and pull-up & pull-down options
- 4 DIL switches w/ enable and pull-up & pull-down options
- 10K Ohm POT connected to an ADC input channel w/ enable
- 1 photocell w/ enable
- 4 User LED’s w/ enable
- 1 RS232 interface w/ enable (DB9 and transceiver footprint only)
- 1 CAN interface w/ enable to high-speed CAN transceiver with DB9 CAN connector
- 2 LIN channels w/ enable sharing one LIN transceiver with two standard LIN connectors
- 4 distinct GND test points
Specifications:
- Board Size 4.7” x 4.3”
- Power Input:
  - USB Cable: 5VDC, 500mA max
  - DC Power Jack: 2.1/5.5mm barrel connector, 9VDC to 12VDC Center Positive

Ships With

TRK–MPC5634M Board
TRK–MPC5634M DVD–ROM (includes CodeWarrior software)
USB A–to–B Cable
NXP Warranty Card

Required Tools

Accessory Tools

Documents

User Manual/Guide

User Manual for TRK-MPC5634M Dev Kit (pdf)

Downloads

Applications Library

Software Code for Using eTPU2 and eQADC for PWM Control on the MPC563xM (zip)

Software Code for Qorivva Simple Cookbook (zip)

Schematics/Layout Files

Schematics File for TRK-MPC5634M Dev Kit (pdf)

Tags: primary_platforms, startertrak, mcu, nxp, development_platforms_kits

MPC563xM StarterTRAK Development Kit

e14-publisher — Thu, 16 Dec 2021 23:20:11 GMT

Revision 3 posted to Documents by e14-publisher on 12/16/2021 11:20:11 PM

MPC563xM StarterTRAK Development Kit

Manufactured By:NXP

Part Number:TRK-MPC5634M

Buy Now

Key Applications: Automotive powertrain and precision timed industrial applications

Features

MPC5634M Microcontroller in a 144LQFP package
On-board JTAG connection via open source OSBDM circuit using the MPC9S08JM microcontroller
MCZ3390S5EK system basis chip with advanced power management and integrated CAN transceiver
CAN & LIN Interface
Analog Interface with potentiometer
High- efficiency LEDs
SCI & SPI serial communication interface
Access to MCU pins with standard headers
On-board Virtual Serial Port
ON/OFF Power Switch w/ LED indicator
A 9VDC to 12VDC power supply input barrel connector
Power Input Selection Jumpers for selecting the input voltage source:
- Power Input from USB Connector
- Power Input from DC Power Jack
  - NXP MC3390x
Jumper to select BAM source:
- From internal memory
- From CAN
- From LIN Flex
RESET Push Button and LED indicator w/ enable
User Features:
- 4 User Push Buttons w/ enable and pull-up & pull-down options
- 4 DIL switches w/ enable and pull-up & pull-down options
- 10K Ohm POT connected to an ADC input channel w/ enable
- 1 photocell w/ enable
- 4 User LED’s w/ enable
- 1 RS232 interface w/ enable (DB9 and transceiver footprint only)
- 1 CAN interface w/ enable to high-speed CAN transceiver with DB9 CAN connector
- 2 LIN channels w/ enable sharing one LIN transceiver with two standard LIN connectors
- 4 distinct GND test points
Specifications:
- Board Size 4.7” x 4.3”
- Power Input:
  - USB Cable: 5VDC, 500mA max
  - DC Power Jack: 2.1/5.5mm barrel connector, 9VDC to 12VDC Center Positive

Ships With

TRK–MPC5634M Board
TRK–MPC5634M DVD–ROM (includes CodeWarrior software)
USB A–to–B Cable
NXP Warranty Card

Required Tools

Accessory Tools

Documents

Application Note

Application Note for Using eTPU2 and eQADC for PWM Control on the MPC563xM (pdf)

Application Note for Qorivva Simple Cookbook (pdf)

Application Note for Initialization and Optimization Program for MPC563xM (pdf)

Data Sheet

Datasheet for MPC5634M Microcontroller (pdf)

Product Brief/Fact sheet

Product Brief for Qorivva MPC563xM Family (pdf)

Quick Start Guide

Quick Start Guide for TRK-MPC5634M Dev Kit (pdf)

User Manual/Guide

User Manual for TRK-MPC5634M Dev Kit (pdf)

Downloads

Applications Library

Software Code for Using eTPU2 and eQADC for PWM Control on the MPC563xM (zip)

Software Code for Qorivva Simple Cookbook (zip)

Schematics/Layout Files

Schematics File for TRK-MPC5634M Dev Kit (pdf)

Tags: primary_platforms, startertrak, mcu, nxp, development_platforms_kits

MPC563xM StarterTRAK Development Kit

e14-publisher — Thu, 16 Dec 2021 03:05:22 GMT

Revision 2 posted to Documents by e14-publisher on 12/16/2021 3:05:22 AM

MPC563xM StarterTRAK Development Kit

Manufactured By:NXP

Part Number:TRK-MPC5634M

Buy Now

Key Applications: Automotive powertrain and precision timed industrial applications

Features

MPC5634M Microcontroller in a 144LQFP package
On-board JTAG connection via open source OSBDM circuit using the MPC9S08JM microcontroller
MCZ3390S5EK system basis chip with advanced power management and integrated CAN transceiver
CAN & LIN Interface
Analog Interface with potentiometer
High- efficiency LEDs
SCI & SPI serial communication interface
Access to MCU pins with standard headers
On-board Virtual Serial Port
ON/OFF Power Switch w/ LED indicator
A 9VDC to 12VDC power supply input barrel connector
Power Input Selection Jumpers for selecting the input voltage source:
- Power Input from USB Connector
- Power Input from DC Power Jack
  - NXP MC3390x
Jumper to select BAM source:
- From internal memory
- From CAN
- From LIN Flex
RESET Push Button and LED indicator w/ enable
User Features:
- 4 User Push Buttons w/ enable and pull-up & pull-down options
- 4 DIL switches w/ enable and pull-up & pull-down options
- 10K Ohm POT connected to an ADC input channel w/ enable
- 1 photocell w/ enable
- 4 User LED’s w/ enable
- 1 RS232 interface w/ enable (DB9 and transceiver footprint only)
- 1 CAN interface w/ enable to high-speed CAN transceiver with DB9 CAN connector
- 2 LIN channels w/ enable sharing one LIN transceiver with two standard LIN connectors
- 4 distinct GND test points
Specifications:
- Board Size 4.7” x 4.3”
- Power Input:
  - USB Cable: 5VDC, 500mA max
  - DC Power Jack: 2.1/5.5mm barrel connector, 9VDC to 12VDC Center Positive

Ships With

TRK–MPC5634M Board
TRK–MPC5634M DVD–ROM (includes CodeWarrior software)
USB A–to–B Cable
NXP Warranty Card

Required Tools

Accessory Tools

Documents

Application Note

Application Note for Using eTPU2 and eQADC for PWM Control on the MPC563xM (pdf)

Application Note for Qorivva Simple Cookbook (pdf)

Application Note for Initialization and Optimization Program for MPC563xM (pdf)

Data Sheet

Datasheet for MPC5634M Microcontroller (pdf)

Product Brief/Fact sheet

Product Brief for Qorivva MPC563xM Family (pdf)

Quick Start Guide

Quick Start Guide for TRK-MPC5634M Dev Kit (pdf)

User Manual/Guide

User Manual for TRK-MPC5634M Dev Kit (pdf)

Downloads

Applications Library

Software Code for Using eTPU2 and eQADC for PWM Control on the MPC563xM (zip)

Software Code for Qorivva Simple Cookbook (zip)

Schematics/Layout Files

Schematics File for TRK-MPC5634M Dev Kit (pdf)

Tags: primary_platforms, startertrak, mcu, nxp, development_platforms_kits

MPC563xM StarterTRAK Development Kit

e14-publisher — Mon, 18 Oct 2021 20:13:47 GMT

Revision 1 posted to Documents by e14-publisher on 10/18/2021 8:13:47 PM

MPC563xM StarterTRAK Development Kit

Manufactured By:NXP

Part Number:TRK-MPC5634M

Buy Now

Key Applications: Automotive powertrain and precision timed industrial applications

Features

MPC5634M Microcontroller in a 144LQFP package
On-board JTAG connection via open source OSBDM circuit using the MPC9S08JM microcontroller
MCZ3390S5EK system basis chip with advanced power management and integrated CAN transceiver
CAN & LIN Interface
Analog Interface with potentiometer
High- efficiency LEDs
SCI & SPI serial communication interface
Access to MCU pins with standard headers
On-board Virtual Serial Port
ON/OFF Power Switch w/ LED indicator
A 9VDC to 12VDC power supply input barrel connector
Power Input Selection Jumpers for selecting the input voltage source:
- Power Input from USB Connector
- Power Input from DC Power Jack
  - NXP MC3390x
Jumper to select BAM source:
- From internal memory
- From CAN
- From LIN Flex
RESET Push Button and LED indicator w/ enable
User Features:
- 4 User Push Buttons w/ enable and pull-up & pull-down options
- 4 DIL switches w/ enable and pull-up & pull-down options
- 10K Ohm POT connected to an ADC input channel w/ enable
- 1 photocell w/ enable
- 4 User LED’s w/ enable
- 1 RS232 interface w/ enable (DB9 and transceiver footprint only)
- 1 CAN interface w/ enable to high-speed CAN transceiver with DB9 CAN connector
- 2 LIN channels w/ enable sharing one LIN transceiver with two standard LIN connectors
- 4 distinct GND test points
Specifications:
- Board Size 4.7” x 4.3”
- Power Input:
  - USB Cable: 5VDC, 500mA max
  - DC Power Jack: 2.1/5.5mm barrel connector, 9VDC to 12VDC Center Positive