PowerQUICC Industrial Development MPU Module

e14-publisher — Fri, 05 May 2023 15:47:31 GMT

Current Revision posted to Documents by e14-publisher on 5/5/2023 3:47:31 PM

PowerQUICC Industrial Development MPU Module

Manufactured By:NXP

Part Number:TWR-MPC8309

Buy Now

The TWR-MPC8309 is a development board for the MPC8309 PowerQUICC® Industrial Development MPU. Using the Tower System with MQX support allows a smooth migration path from NXP MCUs to this 835DMIPS Power Architecture® processor featuring an industrial protocol off-load engine which can remove the need for an external protocol FPGA/ASIC.The TWR-MPC8309 operates as a standalone debug tool and can also be combined and used as part of the modular Tower System development platform.

The MPC8309 PowerQUICC II Pro is a member of the MPC830x family of cost-effective network communication processors that meet the requirements of multi-protocol control applications. It provides better CPU performance, additional functionality and faster interfaces than current PowerQUICC II processors while addressing important time to market, price, power consumption and board real estate requirements.

The versatile MPC8309 processor delivers up to 835 DMIPS of processing power at less than 1.6W and features 233 MHz QUICC Engine technology for protocol offloading.NXP’s QUICC Engine technology can support a wide range of Ethernet and fieldbus-based industrial networking protocols, virtually eliminating the need for an expensive FPGA/ASIC, thereby reducing design complexity and system bill of material (BOM) cost while leaving the CPU available for application processing.

Key Applications:

Connectivity: PROFIBUS, IEEE® 1588
Industrial : Programmable Logic Control (PLC), Process Control, Temperature Control, Input-Output Control (I/O Control), Fieldbus-to-Ethernet Gateway, Single Board Computer
Networking : Gateway (Router), Ethernet Converter (Bridge), Industrial Hub, Branch Access Gateway, Low-End Base Station I/O Cards, Low-End Gateway, Base Station and Other Infrastructure Equipments, Test and Measurement, Controllers for DSLAM and Other Infrastructure Equipment

Features

MPC8309 PowerQUICC II Pro processor
- 835 DMIPS, sub-1.6W operation
- 417 MHz e300c processor, built on Power Architecture® technology
- 233 MHz QUICC Engine technology
- 16 KB L1 instruction cache and 16 KB L1 data cache
- DDR2 controller (32/16-bit with ECC support)
- 3x 10/100 Base-T Ethernet
- 4x CAN 2.0B
- PCI 2.3, USB 2.0, SD/SDIO, I2C, SPI, DUART
Configurations
- Stand-alone RDB development board
- SoM over primary elevator connector
- Rapid prototyping with Tower System peripheral modules
Memory
- 128 MB DDR2 memory
- 32 MB NOR flash memory
Connectivity and features
- NXP silicon, including a 32-bit MCU, digital accelerometer and audio CODEC
- Dual RJ45 Ethernet ports
- Dual RS485 fieldbus ports
- IEEE® 1588 with VCXO fine granularity clock tuning
- RS232 port
- High-Speed USB 2.0 OTG port
- Host: Expansion through external hub (e.g. 3G/4G, ZigBee®, Wi-Fi®, NAS, keyboard, mouse)
- Device to external USB host system (board power source)
- Stereo audio and microphone jack for audio interface
- Full-size SD/SDIO expansion port (e.g.storage, Wi-Fi, Bluetooth®, GPS, camera)
- Mini PCI expansion port (e.g. 802.11n Wi-Fi)
Debug interfaces
- Full-Speed USB 2.0 (board power source, console)
- JTAG/COP debug header
Package/expansion
- Connector supporting MPC830x-TLCD: 3.2” QVGA LCD touch screen with 12-key capacitive touch pad
- Access to MPC8309 and MCU signals over primary elevator connector
- Linux® and MQX™ BSP software included
- Reference design (schematics, layout and BOM available)
- Printed quick start guide and DVD with software and documentation
Certification: FCC class B and CE

Ships With

TWR-MPC8309 board with a MPC8309 32-bit MCU
Necessary cables
Quick Start Guide document

Required Tools

Accessory Tools

Documents

Downloads

Applications Library

Software Code for Virtual COM support for the TWR-MPC8309 using the on board (zip)

Bill of Materials

BOM file for TWR-MPC8309 Tower Module (xls)

Schematics/Layout Files

Schematics file for TWR-MPC8309 Tower Module (pdf)

Gerber file for TWR-MPC8309 Tower Module (zip)

Tags: primary_platforms, mcu, nxp, development_platforms_kits, powerquicc

PowerQUICC Industrial Development MPU Module

e14-publisher — Thu, 16 Dec 2021 23:20:22 GMT

Revision 3 posted to Documents by e14-publisher on 12/16/2021 11:20:22 PM

PowerQUICC Industrial Development MPU Module

Manufactured By:NXP

Part Number:TWR-MPC8309

Buy Now

Key Applications:

Connectivity: PROFIBUS, IEEE® 1588
Industrial : Programmable Logic Control (PLC), Process Control, Temperature Control, Input-Output Control (I/O Control), Fieldbus-to-Ethernet Gateway, Single Board Computer
Networking : Gateway (Router), Ethernet Converter (Bridge), Industrial Hub, Branch Access Gateway, Low-End Base Station I/O Cards, Low-End Gateway, Base Station and Other Infrastructure Equipments, Test and Measurement, Controllers for DSLAM and Other Infrastructure Equipment

Features

MPC8309 PowerQUICC II Pro processor
- 835 DMIPS, sub-1.6W operation
- 417 MHz e300c processor, built on Power Architecture® technology
- 233 MHz QUICC Engine technology
- 16 KB L1 instruction cache and 16 KB L1 data cache
- DDR2 controller (32/16-bit with ECC support)
- 3x 10/100 Base-T Ethernet
- 4x CAN 2.0B
- PCI 2.3, USB 2.0, SD/SDIO, I2C, SPI, DUART
Configurations
- Stand-alone RDB development board
- SoM over primary elevator connector
- Rapid prototyping with Tower System peripheral modules
Memory
- 128 MB DDR2 memory
- 32 MB NOR flash memory
Connectivity and features
- NXP silicon, including a 32-bit MCU, digital accelerometer and audio CODEC
- Dual RJ45 Ethernet ports
- Dual RS485 fieldbus ports
- IEEE® 1588 with VCXO fine granularity clock tuning
- RS232 port
- High-Speed USB 2.0 OTG port
- Host: Expansion through external hub (e.g. 3G/4G, ZigBee®, Wi-Fi®, NAS, keyboard, mouse)
- Device to external USB host system (board power source)
- Stereo audio and microphone jack for audio interface
- Full-size SD/SDIO expansion port (e.g.storage, Wi-Fi, Bluetooth®, GPS, camera)
- Mini PCI expansion port (e.g. 802.11n Wi-Fi)
Debug interfaces
- Full-Speed USB 2.0 (board power source, console)
- JTAG/COP debug header
Package/expansion
- Connector supporting MPC830x-TLCD: 3.2” QVGA LCD touch screen with 12-key capacitive touch pad
- Access to MPC8309 and MCU signals over primary elevator connector
- Linux® and MQX™ BSP software included
- Reference design (schematics, layout and BOM available)
- Printed quick start guide and DVD with software and documentation
Certification: FCC class B and CE

Ships With

TWR-MPC8309 board with a MPC8309 32-bit MCU
Necessary cables
Quick Start Guide document

Required Tools

Accessory Tools

Documents

Product Brief/Fact sheet

Product Brief for TWR-MPC8309 Industrial Networking Development Platform (pdf)

Product Brief for New Form Factor for Power Architecture Technology in Industrial Applications (pdf)

Product Brief for Power Architecture edition of Beyond Bits (pdf)

Quick Start Guide

Quick Start Guide for TWR-MPC8309 Tower Module (pdf)

User Manual/Guide

User Manual for CSP Custom Product Capabilities and MPC830x Portfolio (pdf)

Downloads

Applications Library

Software Code for Virtual COM support for the TWR-MPC8309 using the on board (zip)

Bill of Materials

BOM file for TWR-MPC8309 Tower Module (xls)

Schematics/Layout Files

Schematics file for TWR-MPC8309 Tower Module (pdf)

Gerber file for TWR-MPC8309 Tower Module (zip)

Tags: primary_platforms, mcu, nxp, development_platforms_kits, powerquicc

PowerQUICC Industrial Development MPU Module

e14-publisher — Thu, 16 Dec 2021 03:05:37 GMT

Revision 2 posted to Documents by e14-publisher on 12/16/2021 3:05:37 AM

PowerQUICC Industrial Development MPU Module

Manufactured By:NXP

Part Number:TWR-MPC8309

Buy Now

Key Applications:

Connectivity: PROFIBUS, IEEE® 1588
Industrial : Programmable Logic Control (PLC), Process Control, Temperature Control, Input-Output Control (I/O Control), Fieldbus-to-Ethernet Gateway, Single Board Computer
Networking : Gateway (Router), Ethernet Converter (Bridge), Industrial Hub, Branch Access Gateway, Low-End Base Station I/O Cards, Low-End Gateway, Base Station and Other Infrastructure Equipments, Test and Measurement, Controllers for DSLAM and Other Infrastructure Equipment

Features

MPC8309 PowerQUICC II Pro processor
- 835 DMIPS, sub-1.6W operation
- 417 MHz e300c processor, built on Power Architecture® technology
- 233 MHz QUICC Engine technology
- 16 KB L1 instruction cache and 16 KB L1 data cache
- DDR2 controller (32/16-bit with ECC support)
- 3x 10/100 Base-T Ethernet
- 4x CAN 2.0B
- PCI 2.3, USB 2.0, SD/SDIO, I2C, SPI, DUART
Configurations
- Stand-alone RDB development board
- SoM over primary elevator connector
- Rapid prototyping with Tower System peripheral modules
Memory
- 128 MB DDR2 memory
- 32 MB NOR flash memory
Connectivity and features
- NXP silicon, including a 32-bit MCU, digital accelerometer and audio CODEC
- Dual RJ45 Ethernet ports
- Dual RS485 fieldbus ports
- IEEE® 1588 with VCXO fine granularity clock tuning
- RS232 port
- High-Speed USB 2.0 OTG port
- Host: Expansion through external hub (e.g. 3G/4G, ZigBee®, Wi-Fi®, NAS, keyboard, mouse)
- Device to external USB host system (board power source)
- Stereo audio and microphone jack for audio interface
- Full-size SD/SDIO expansion port (e.g.storage, Wi-Fi, Bluetooth®, GPS, camera)
- Mini PCI expansion port (e.g. 802.11n Wi-Fi)
Debug interfaces
- Full-Speed USB 2.0 (board power source, console)
- JTAG/COP debug header
Package/expansion
- Connector supporting MPC830x-TLCD: 3.2” QVGA LCD touch screen with 12-key capacitive touch pad
- Access to MPC8309 and MCU signals over primary elevator connector
- Linux® and MQX™ BSP software included
- Reference design (schematics, layout and BOM available)
- Printed quick start guide and DVD with software and documentation
Certification: FCC class B and CE

Ships With

TWR-MPC8309 board with a MPC8309 32-bit MCU
Necessary cables
Quick Start Guide document

Required Tools

Accessory Tools

Documents

Product Brief/Fact sheet

Product Brief for TWR-MPC8309 Industrial Networking Development Platform (pdf)

Product Brief for New Form Factor for Power Architecture Technology in Industrial Applications (pdf)

Product Brief for Power Architecture edition of Beyond Bits (pdf)

Quick Start Guide

Quick Start Guide for TWR-MPC8309 Tower Module (pdf)

User Manual/Guide

User Manual for CSP Custom Product Capabilities and MPC830x Portfolio (pdf)

Downloads

Applications Library

Software Code for Virtual COM support for the TWR-MPC8309 using the on board (zip)

Bill of Materials

BOM file for TWR-MPC8309 Tower Module (xls)

Schematics/Layout Files

Schematics file for TWR-MPC8309 Tower Module (pdf)

Gerber file for TWR-MPC8309 Tower Module (zip)

Tags: primary_platforms, mcu, nxp, development_platforms_kits, powerquicc

PowerQUICC Industrial Development MPU Module

e14-publisher — Mon, 18 Oct 2021 20:13:56 GMT

Revision 1 posted to Documents by e14-publisher on 10/18/2021 8:13:56 PM

PowerQUICC Industrial Development MPU Module

Manufactured By:NXP

Part Number:TWR-MPC8309

Buy Now

Key Applications:

Connectivity: PROFIBUS, IEEE® 1588
Industrial : Programmable Logic Control (PLC), Process Control, Temperature Control, Input-Output Control (I/O Control), Fieldbus-to-Ethernet Gateway, Single Board Computer
Networking : Gateway (Router), Ethernet Converter (Bridge), Industrial Hub, Branch Access Gateway, Low-End Base Station I/O Cards, Low-End Gateway, Base Station and Other Infrastructure Equipments, Test and Measurement, Controllers for DSLAM and Other Infrastructure Equipment

Features

MPC8309 PowerQUICC II Pro processor
- 835 DMIPS, sub-1.6W operation
- 417 MHz e300c processor, built on Power Architecture® technology
- 233 MHz QUICC Engine technology
- 16 KB L1 instruction cache and 16 KB L1 data cache
- DDR2 controller (32/16-bit with ECC support)
- 3x 10/100 Base-T Ethernet
- 4x CAN 2.0B
- PCI 2.3, USB 2.0, SD/SDIO, I2C, SPI, DUART
Configurations
- Stand-alone RDB development board
- SoM over primary elevator connector
- Rapid prototyping with Tower System peripheral modules
Memory
- 128 MB DDR2 memory
- 32 MB NOR flash memory
Connectivity and features
- NXP silicon, including a 32-bit MCU, digital accelerometer and audio CODEC
- Dual RJ45 Ethernet ports
- Dual RS485 fieldbus ports
- IEEE® 1588 with VCXO fine granularity clock tuning
- RS232 port
- High-Speed USB 2.0 OTG port
- Host: Expansion through external hub (e.g. 3G/4G, ZigBee®, Wi-Fi®, NAS, keyboard, mouse)
- Device to external USB host system (board power source)
- Stereo audio and microphone jack for audio interface
- Full-size SD/SDIO expansion port (e.g.storage, Wi-Fi, Bluetooth®, GPS, camera)
- Mini PCI expansion port (e.g. 802.11n Wi-Fi)
Debug interfaces
- Full-Speed USB 2.0 (board power source, console)
- JTAG/COP debug header
Package/expansion
- Connector supporting MPC830x-TLCD: 3.2” QVGA LCD touch screen with 12-key capacitive touch pad
- Access to MPC8309 and MCU signals over primary elevator connector
- Linux® and MQX™ BSP software included
- Reference design (schematics, layout and BOM available)
- Printed quick start guide and DVD with software and documentation
Certification: FCC class B and CE