Microstick for 3V PIC24F K-series

e14-publisher — Fri, 05 May 2023 15:47:49 GMT

Current Revision posted to Documents by e14-publisher on 5/5/2023 3:47:49 PM

Microstick for 3V PIC24F K-series

Manufactured By:Microchip

Part Number:DM240013-1

Buy Now

The Microchip's Microstick (DM240013-1) for 3V PIC24F K-series is a flexible USB powered development platform. It’s the perfect solution for those looking to get started with Microchip’s lowest cost 16-bit microcontroller families – PIC24F “KL” and “KA” – for extremely cost sensitive consumer. The Microstick for 3V PIC24 K Series (DM240013-1) Devices is designed to provide an easy-to-use, economical development environment for 16-bit microcontrollers. The board includes an integrated debugger/programmer, a socket for the target microcontroller chip and pins that facilitate insertion into a prototyping board for extremely flexible development.

Hardware Design

The Microstick for 3V PIC24 K Series (DM240013-1) Devices is USB bus-powered. An on-board MCP1727 LDO regulator provides 3.3 VDC output from the USB bus power. Turning power on/off to the target application is controlled by the MPLAB IDE via the FPF2102 load switch. The FPF2102 load switch automatically shuts down power to the target if the current exceeds a trip point of 200 mA to 400 mA. This may help protect the host PC USB port from accidental shorting of power supply pins in the target application circuit. The Microstick may be plugged into a prototyping board to develop external application circuitry with the PIC® MCU. On the bottom side of the board, three rows of pins are provided, labeled P1, P2 and P3.

Using the 16-Bit XLP Development Board

In the skinny DIP layout configuration (rows, P1 and P2, are populated), the Microstick may be plugged into Microchip’s “16-Bit XLP Development Board”. The 16-Bit XLP Development Board provides several external buttons, LEDs, peripherals and sensors that can be used to quickly evaluate the device without spending time wiring a breadboard. The 16-Bit XLP Development Board may come with a USB-to-Serial or RS-232 serial port wired to the PIC microcontroller’s U2TX/U2RX pins. To avoid conflict with the on-board serial port circuitry, slide S3 of the Microstick to the PGEC3/PGED3 setting (move the switch lever towards the DIP socket).

The MPLAB® Integrated Development Environment (IDE) should be installed prior to using the Microstick for 3V PIC24 K Series Devices. This board is designed to run with MPLAB IDE Version 8.80 or later.

Key Applications: Medical and Industrial applications.

Features

Low Cost
Compatible with Microchip’s popular 16-bit XLP Development Board (DM240311)
Integrated Programmer / Debugger – No External Debugger Required
USB Powered – Ease of Use, No External Power Supply Required
Supports 3V PIC24 K-series MCUs (28-pin SPDIP)
Integrated USB programmer/debugger – no external debugger required
On-board user and power LEDs
Socket for flexible, easy device replacement
MPLAB IDE Support - free, integrated tool set
DUT Socket – Flexible, Easy Device Swapping
Works Stand-alone or Plugged into a Prototyping Board
Easy Access to all Device Signals for Probing
Smaller than a Stick of Gum at 20mm x 69mm – Easily Portable
On Board User and Power LEDs
Reset Button
Free Demo Code

Ships With

Microstick for 3V PIC24F K-series Board
USB Cable
Two 1x14 Header Pins for Proto Board Use or Plugging into Microchip’s 16-bit XLP Development Board
One PIC24F16KL402
One PIC24F16KA102

Required Tools

Accessory Tools

Documents

Downloads

Applications Library

Software Code for PIC24F16KA102 Microstick Demo Kit (Part 1/2) (zip)

Software Code for PIC24F16KA102 Microstick Demo Kit (Part 2/2) (zip)

Tags: microchip, pic24f, primary_platforms, mcu, development_platforms_kits, microstick

Microstick for 3V PIC24F K-series

e14-publisher — Thu, 16 Dec 2021 23:20:41 GMT

Revision 3 posted to Documents by e14-publisher on 12/16/2021 11:20:41 PM

Microstick for 3V PIC24F K-series

Manufactured By:Microchip

Part Number:DM240013-1

Buy Now

Hardware Design

Using the 16-Bit XLP Development Board

Key Applications: Medical and Industrial applications.

Features

Low Cost
Compatible with Microchip’s popular 16-bit XLP Development Board (DM240311)
Integrated Programmer / Debugger – No External Debugger Required
USB Powered – Ease of Use, No External Power Supply Required
Supports 3V PIC24 K-series MCUs (28-pin SPDIP)
Integrated USB programmer/debugger – no external debugger required
On-board user and power LEDs
Socket for flexible, easy device replacement
MPLAB IDE Support - free, integrated tool set
DUT Socket – Flexible, Easy Device Swapping
Works Stand-alone or Plugged into a Prototyping Board
Easy Access to all Device Signals for Probing
Smaller than a Stick of Gum at 20mm x 69mm – Easily Portable
On Board User and Power LEDs
Reset Button
Free Demo Code

Ships With

Microstick for 3V PIC24F K-series Board
USB Cable
Two 1x14 Header Pins for Proto Board Use or Plugging into Microchip’s 16-bit XLP Development Board
One PIC24F16KL402
One PIC24F16KA102

Required Tools

Accessory Tools

Documents

Application Note

Application Note for Data Encryption Routines for PIC24 and dsPIC Devices (pdf)

Application Note for Run-Time Calibration of Watch Crystals (pdf)

Application Note for A Serial Bootloader for PIC24F Devices (pdf)

Application Note for Class B Safety Software Library for PIC MCUs and dsPIC DSCs (pdf)

Application Note for Low-Power Design Guide (pdf)

Product Brief/Fact sheet

Product Brief for PIC24F KL Microcontroller Family (pdf)

Selection Guide

Selection Guide for 16-bit Embedded Control Solutions (pdf)

Selection Guide for PIC24 Microcontroller Family (pdf)

Downloads

Applications Library

Software Code for PIC24F16KA102 Microstick Demo Kit (Part 1/2) (zip)

Software Code for PIC24F16KA102 Microstick Demo Kit (Part 2/2) (zip)

Tags: microchip, pic24f, primary_platforms, mcu, development_platforms_kits, microstick

Microstick for 3V PIC24F K-series

e14-publisher — Thu, 16 Dec 2021 03:05:58 GMT

Revision 2 posted to Documents by e14-publisher on 12/16/2021 3:05:58 AM

Microstick for 3V PIC24F K-series

Manufactured By:Microchip

Part Number:DM240013-1

Buy Now

Hardware Design

Using the 16-Bit XLP Development Board

Key Applications: Medical and Industrial applications.

Features

Low Cost
Compatible with Microchip’s popular 16-bit XLP Development Board (DM240311)
Integrated Programmer / Debugger – No External Debugger Required
USB Powered – Ease of Use, No External Power Supply Required
Supports 3V PIC24 K-series MCUs (28-pin SPDIP)
Integrated USB programmer/debugger – no external debugger required
On-board user and power LEDs
Socket for flexible, easy device replacement
MPLAB IDE Support - free, integrated tool set
DUT Socket – Flexible, Easy Device Swapping
Works Stand-alone or Plugged into a Prototyping Board
Easy Access to all Device Signals for Probing
Smaller than a Stick of Gum at 20mm x 69mm – Easily Portable
On Board User and Power LEDs
Reset Button
Free Demo Code

Ships With

Microstick for 3V PIC24F K-series Board
USB Cable
Two 1x14 Header Pins for Proto Board Use or Plugging into Microchip’s 16-bit XLP Development Board
One PIC24F16KL402
One PIC24F16KA102

Required Tools

Accessory Tools

Documents

Application Note

Application Note for Data Encryption Routines for PIC24 and dsPIC Devices (pdf)

Application Note for Run-Time Calibration of Watch Crystals (pdf)

Application Note for A Serial Bootloader for PIC24F Devices (pdf)

Application Note for Class B Safety Software Library for PIC MCUs and dsPIC DSCs (pdf)

Application Note for Low-Power Design Guide (pdf)

Product Brief/Fact sheet

Product Brief for PIC24F KL Microcontroller Family (pdf)

Selection Guide

Selection Guide for 16-bit Embedded Control Solutions (pdf)

Selection Guide for PIC24 Microcontroller Family (pdf)

Downloads

Applications Library

Software Code for PIC24F16KA102 Microstick Demo Kit (Part 1/2) (zip)

Software Code for PIC24F16KA102 Microstick Demo Kit (Part 2/2) (zip)

Tags: microchip, pic24f, primary_platforms, mcu, development_platforms_kits, microstick

Microstick for 3V PIC24F K-series

e14-publisher — Mon, 18 Oct 2021 20:14:09 GMT

Revision 1 posted to Documents by e14-publisher on 10/18/2021 8:14:09 PM

Microstick for 3V PIC24F K-series

Manufactured By:Microchip

Part Number:DM240013-1

Buy Now

Hardware Design

Using the 16-Bit XLP Development Board

Key Applications: Medical and Industrial applications.

Features

Low Cost
Compatible with Microchip’s popular 16-bit XLP Development Board (DM240311)
Integrated Programmer / Debugger – No External Debugger Required
USB Powered – Ease of Use, No External Power Supply Required
Supports 3V PIC24 K-series MCUs (28-pin SPDIP)
Integrated USB programmer/debugger – no external debugger required
On-board user and power LEDs
Socket for flexible, easy device replacement
MPLAB IDE Support - free, integrated tool set
DUT Socket – Flexible, Easy Device Swapping
Works Stand-alone or Plugged into a Prototyping Board
Easy Access to all Device Signals for Probing
Smaller than a Stick of Gum at 20mm x 69mm – Easily Portable
On Board User and Power LEDs
Reset Button
Free Demo Code

Ships With

Microstick for 3V PIC24F K-series Board
USB Cable
Two 1x14 Header Pins for Proto Board Use or Plugging into Microchip’s 16-bit XLP Development Board
One PIC24F16KL402
One PIC24F16KA102

Required Tools

Accessory Tools

Documents

Application Note

Application Note for Data Encryption Routines for PIC24 and dsPIC Devices (pdf)

Application Note for Run-Time Calibration of Watch Crystals (pdf)

Application Note for A Serial Bootloader for PIC24F Devices (pdf)

Application Note for Class B Safety Software Library for PIC MCUs and dsPIC DSCs (pdf)

Application Note for Low-Power Design Guide (pdf)

Product Brief/Fact sheet

Product Brief for PIC24F KL Microcontroller Family (pdf)

Selection Guide

Selection Guide for 16-bit Embedded Control Solutions (pdf)

Selection Guide for PIC24 Microcontroller Family (pdf)

Downloads

Applications Library

Software Code for PIC24F16KA102 Microstick Demo Kit (Part 1/2) (zip)

Software Code for PIC24F16KA102 Microstick Demo Kit (Part 2/2) (zip)

Tags: microchip, pic24f, primary_platforms, mcu, development_platforms_kits, microstick