Evaluation Kit for AT91SAM9G45

e14-publisher — Fri, 05 May 2023 15:49:17 GMT

Current Revision posted to Documents by e14-publisher on 5/5/2023 3:49:17 PM

Evaluation Kit for AT91SAM9G45

Manufactured By:Embest

Part Number:AT91SAM9G45-EVK

Buy Now

Atmel and element14 together introduce The AT91SAM9G45-EVK evaluation kit, developed by Embest in partnership with Atmel, is a full-featured evaluation board based on Atmel's processor the AT91SAM9G45 which runs at up to 400MHz, with 128 Mbytes DDR2 memory and 256 Mbytes SLC NAND Flash. The board provides a wide range of peripherals, including a high-speed USB host/device port, an Ethernet 10/100 interface, two high-speed SD/MMC slots and a QVGA 320x240 LCD panel with Resistive touch screen.

In addition, the board supports Linux, WinCE and offers plenty of example applications for all three, makes it easy for engineers to develop their project based on this AT91SAM9G45 processor.

The ARM926EJ-S based AT91SAM9G45 features the frequently demanded combination of user interface functionality and high data rate connectivity, including LCD Controller, resistive touch-screen, camera interface, audio, Ethernet 10/100 and high speed USB and SDIO. With the processor running at 400MHz and multiple 100 Mbps data rate peripherals, the AT91SAM9G45-EVK has the performance and bandwidth to the network or local storage media to provide an adequate user experience.

The AT91SAM9G45-EVK supports the latest generation of DDR2 and NAND Flash memory interfaces for program and data storage. An internal 133 MHz multi-layer bus architecture associated with 37 DMA channels, a dual external bus interface and distributed memory including a 64Kbyte SRAM which can be configured as a tightly coupled memory (TCM) sustains the high bandwidth required by the processor and the high speed peripherals. The I/Os support 1.8V or 3.3V operation, and are independently configurable for the memory interface and peripheral I/Os. This feature completely eliminates the need for any external level shifters.

In addition it supports 0.8 ball pitch package for low cost PCB manufacturing. The AT91SAM9G45 power management controller features efficient clock gating and a battery backup section minimizing power consumption in active and standby modes.

Software Features:

There are plenty of software examples provided for you to test and debug this AT91SAM9G45-EVK board, all in source code. These software examples (as follows) can be debugged under the popular Keil MDK (Microcontroller Development Kit) environments and help with your design and development.

WinCE 6.0 OS Mapping, and the FirstBoot and Eboot set up from NAND Flash
Linux 2.6.30 source code and mapping, and the UBoot set up from NAND Flash
Audio output test program
NandFlash read/write test program
NorFlash read/write test program
DDR2 SDRAM read/write test program
DataFlash read/write test program
EEPROM read/write test program
RTT Realtime timer test program
RTC Realtime timer test program
TWI Test program
DMA transfer test program
DBGU Serial interface communication test program
Ethernet test program
USB test program
Micro SD Card Read/Write test program
SD/MMC Card Read/Write test program

Key Applications: Industrial and building control, HVAC, POS terminals, Alarm systems, Printers, Medical Appliances.

Features

Support Linux2.6 and WinCE6.0 OS, with free relevant board support packages (BSPs)
CPU: Atmel AT91SAM9G45 (ARM926EJ-S Core), 400MHz
On-chip memory: 64KB ROM & 64KB SRAM
External memory: 256MBNandFlash, 2MB NorFlash, 4MB DataFlash & two 64MB DDR2 SDRAM
Four UART interfaces
One high-speed USB Host Port
One high-speed Host Device Port
One JTAG Debug Interface
One 10/100 Ethernet interface
One SD/MMC card interface
One Micro SD card interface
One IIS Audio output port
One IIS Audio input port
Two User buttons
One Wake-up button
One Reset button
One User LED
One Power LED
60 I/O Pins User Extension Interface
Power: 5VDC from connector, with back-up battery on board
Working temperature: -10 to 70 Deg C
Dimension: 120 x 90 mm

Ships With

AT91SAM9G45-EVK Board - Target board; CPU: AT91SAM9G45
IDC10 Cable - 10-10pins, 10cm, gap:2.00mm
Mini USB Cable - To supply power to the board or for downloading programs and debug
10/100 Ethernet Cable - Connect to the network
DB9-IDC10 Cable - DB9(F) to IDC(10 pins) cable
20Pins-10Pins JTAG Converter - Connect with 20pins or 10pins JTAG Debug Cables
TFT LCD Panel - 4.3 inch QVGA 480x272 LCD panel with resistive touch screen
Power Adapter - 12V, 1.25A, supply power to the board

Required Tools

Accessory Tools

Documents

Data Sheet

Datasheet for AT91SAM9G45 MCU (pdf)

Reference Manual

Technical Reference Manual for ARM926EJ-S (pdf)

User Manual/Guide

User Manual for AT91SAM9G45-EVK Evaluation Kit (pdf)

User Guide for ATMEL SAM9G45 ARM9 Board (EB-SAM9G45) (pdf)

WinCE User Manual for AT91SAM9G45-EVK Evaluation Kit (pdf)

Linux User Manual for AT91SAM9G45-EVK Evaluation Kit (pdf)

Android User Manual for AT91SAM9G45-EVK Evaluation Kit (pdf)

MDK ARM User Manual for AT91SAM9G45-EVK Evaluation Kit (pdf)

Downloads

FAQs

How do we interface camera to the AT91SAM9G45-EVK Evaluation Kit?

The 'J9' Extended interface is used for the CMOS camera interface.

How do I connect the ARM JTAG Emulator to the AT91SAM9G45-EVK Evaluation Kit?

Using the standard 10-pin JTAG connector on the AT91SAM9G45-EVK ARM9 Board, you can connect with any ARM JTAG Emulator such as ULINK2, Jlink etc.

Do we need to set the Serial Port Receive Settings in the PC?

Yes, in the PC Run HyperTerminal serial communication program, select the serial port used and set the following parameters (to set status: Baud rate (115200), data bits (8 bits), stop bits (1 bit), parity bit (no ), data flow control (no)).

Tags: at91sam9g45, primary_platforms, mcu, development_platforms_kits, embest

Evaluation Kit for AT91SAM9G45

e14-publisher — Thu, 16 Dec 2021 23:22:06 GMT

Revision 3 posted to Documents by e14-publisher on 12/16/2021 11:22:06 PM

Evaluation Kit for AT91SAM9G45

Manufactured By:Embest

Part Number:AT91SAM9G45-EVK

Buy Now

In addition, the board supports Linux, WinCE and offers plenty of example applications for all three, makes it easy for engineers to develop their project based on this AT91SAM9G45 processor.

Software Features:

WinCE 6.0 OS Mapping, and the FirstBoot and Eboot set up from NAND Flash
Linux 2.6.30 source code and mapping, and the UBoot set up from NAND Flash
Audio output test program
NandFlash read/write test program
NorFlash read/write test program
DDR2 SDRAM read/write test program
DataFlash read/write test program
EEPROM read/write test program
RTT Realtime timer test program
RTC Realtime timer test program
TWI Test program
DMA transfer test program
DBGU Serial interface communication test program
Ethernet test program
USB test program
Micro SD Card Read/Write test program
SD/MMC Card Read/Write test program

Key Applications: Industrial and building control, HVAC, POS terminals, Alarm systems, Printers, Medical Appliances.

Features

Support Linux2.6 and WinCE6.0 OS, with free relevant board support packages (BSPs)
CPU: Atmel AT91SAM9G45 (ARM926EJ-S Core), 400MHz
On-chip memory: 64KB ROM & 64KB SRAM
External memory: 256MBNandFlash, 2MB NorFlash, 4MB DataFlash & two 64MB DDR2 SDRAM
Four UART interfaces
One high-speed USB Host Port
One high-speed Host Device Port
One JTAG Debug Interface
One 10/100 Ethernet interface
One SD/MMC card interface
One Micro SD card interface
One IIS Audio output port
One IIS Audio input port
Two User buttons
One Wake-up button
One Reset button
One User LED
One Power LED
60 I/O Pins User Extension Interface
Power: 5VDC from connector, with back-up battery on board
Working temperature: -10 to 70 Deg C
Dimension: 120 x 90 mm

Ships With

AT91SAM9G45-EVK Board - Target board; CPU: AT91SAM9G45
IDC10 Cable - 10-10pins, 10cm, gap:2.00mm
Mini USB Cable - To supply power to the board or for downloading programs and debug
10/100 Ethernet Cable - Connect to the network
DB9-IDC10 Cable - DB9(F) to IDC(10 pins) cable
20Pins-10Pins JTAG Converter - Connect with 20pins or 10pins JTAG Debug Cables
TFT LCD Panel - 4.3 inch QVGA 480x272 LCD panel with resistive touch screen
Power Adapter - 12V, 1.25A, supply power to the board

Required Tools

Accessory Tools

Documents

Data Sheet

Datasheet for AT91SAM9G45 MCU (pdf)

Reference Manual

Technical Reference Manual for ARM926EJ-S (pdf)

User Manual/Guide

User Manual for AT91SAM9G45-EVK Evaluation Kit (pdf)

User Guide for ATMEL SAM9G45 ARM9 Board (EB-SAM9G45) (pdf)

WinCE User Manual for AT91SAM9G45-EVK Evaluation Kit (pdf)

Linux User Manual for AT91SAM9G45-EVK Evaluation Kit (pdf)

Android User Manual for AT91SAM9G45-EVK Evaluation Kit (pdf)

MDK ARM User Manual for AT91SAM9G45-EVK Evaluation Kit (pdf)

Downloads

Applications Library

SAM-BA In-system Programmer Tool v2.11 (for Windows) (zip)

Linux Image (4.3" LCD) for AT91SAM9G45-EVK Evaluation Kit (zip)

Linux Image (7" LCD) for AT91SAM9G45-EVK Evaluation Kit (zip)

Linux Image (10.2" LCD) for AT91SAM9G45-EVK Evaluation Kit (zip)

Android Image (7" LCD) for AT91SAM9G45-EVK Evaluation Kit (zip)

Android Image (4.3" LCD) for AT91SAM9G45-EVK Evaluation Kit (zip)

Sample Code

MDK ARM Source Code for AT91SAM9G45-EVK Evaluation Kit (zip)

WindCE Source Code and Image for AT91SAM9G45-EVK Evaluation Kit (zip)

Schematics/Layout Files

Schematics for AT91SAM9G45-EVK Evaluation Kit (pdf)

FAQs

How do we interface camera to the AT91SAM9G45-EVK Evaluation Kit?

The 'J9' Extended interface is used for the CMOS camera interface.

How do I connect the ARM JTAG Emulator to the AT91SAM9G45-EVK Evaluation Kit?

Using the standard 10-pin JTAG connector on the AT91SAM9G45-EVK ARM9 Board, you can connect with any ARM JTAG Emulator such as ULINK2, Jlink etc.

Do we need to set the Serial Port Receive Settings in the PC?

Tags: at91sam9g45, primary_platforms, mcu, development_platforms_kits, embest

Evaluation Kit for AT91SAM9G45

e14-publisher — Thu, 16 Dec 2021 03:08:31 GMT

Revision 2 posted to Documents by e14-publisher on 12/16/2021 3:08:31 AM

Evaluation Kit for AT91SAM9G45

Manufactured By:Embest

Part Number:AT91SAM9G45-EVK

Buy Now

In addition, the board supports Linux, WinCE and offers plenty of example applications for all three, makes it easy for engineers to develop their project based on this AT91SAM9G45 processor.

Software Features:

WinCE 6.0 OS Mapping, and the FirstBoot and Eboot set up from NAND Flash
Linux 2.6.30 source code and mapping, and the UBoot set up from NAND Flash
Audio output test program
NandFlash read/write test program
NorFlash read/write test program
DDR2 SDRAM read/write test program
DataFlash read/write test program
EEPROM read/write test program
RTT Realtime timer test program
RTC Realtime timer test program
TWI Test program
DMA transfer test program
DBGU Serial interface communication test program
Ethernet test program
USB test program
Micro SD Card Read/Write test program
SD/MMC Card Read/Write test program

Key Applications: Industrial and building control, HVAC, POS terminals, Alarm systems, Printers, Medical Appliances.

Features

Support Linux2.6 and WinCE6.0 OS, with free relevant board support packages (BSPs)
CPU: Atmel AT91SAM9G45 (ARM926EJ-S Core), 400MHz
On-chip memory: 64KB ROM & 64KB SRAM
External memory: 256MBNandFlash, 2MB NorFlash, 4MB DataFlash & two 64MB DDR2 SDRAM
Four UART interfaces
One high-speed USB Host Port
One high-speed Host Device Port
One JTAG Debug Interface
One 10/100 Ethernet interface
One SD/MMC card interface
One Micro SD card interface
One IIS Audio output port
One IIS Audio input port
Two User buttons
One Wake-up button
One Reset button
One User LED
One Power LED
60 I/O Pins User Extension Interface
Power: 5VDC from connector, with back-up battery on board
Working temperature: -10 to 70 Deg C
Dimension: 120 x 90 mm

Ships With

AT91SAM9G45-EVK Board - Target board; CPU: AT91SAM9G45
IDC10 Cable - 10-10pins, 10cm, gap:2.00mm
Mini USB Cable - To supply power to the board or for downloading programs and debug
10/100 Ethernet Cable - Connect to the network
DB9-IDC10 Cable - DB9(F) to IDC(10 pins) cable
20Pins-10Pins JTAG Converter - Connect with 20pins or 10pins JTAG Debug Cables
TFT LCD Panel - 4.3 inch QVGA 480x272 LCD panel with resistive touch screen
Power Adapter - 12V, 1.25A, supply power to the board

Required Tools

Accessory Tools

Documents

Data Sheet

Datasheet for AT91SAM9G45 MCU (pdf)

Reference Manual

Technical Reference Manual for ARM926EJ-S (pdf)

User Manual/Guide

User Manual for AT91SAM9G45-EVK Evaluation Kit (pdf)

User Guide for ATMEL SAM9G45 ARM9 Board (EB-SAM9G45) (pdf)

WinCE User Manual for AT91SAM9G45-EVK Evaluation Kit (pdf)

Linux User Manual for AT91SAM9G45-EVK Evaluation Kit (pdf)

Android User Manual for AT91SAM9G45-EVK Evaluation Kit (pdf)

MDK ARM User Manual for AT91SAM9G45-EVK Evaluation Kit (pdf)

Downloads

Applications Library

SAM-BA In-system Programmer Tool v2.11 (for Windows) (zip)

Linux Image (4.3" LCD) for AT91SAM9G45-EVK Evaluation Kit (zip)

Linux Image (7" LCD) for AT91SAM9G45-EVK Evaluation Kit (zip)

Linux Image (10.2" LCD) for AT91SAM9G45-EVK Evaluation Kit (zip)

Android Image (7" LCD) for AT91SAM9G45-EVK Evaluation Kit (zip)

Android Image (4.3" LCD) for AT91SAM9G45-EVK Evaluation Kit (zip)

Sample Code

MDK ARM Source Code for AT91SAM9G45-EVK Evaluation Kit (zip)

WindCE Source Code and Image for AT91SAM9G45-EVK Evaluation Kit (zip)

Schematics/Layout Files

Schematics for AT91SAM9G45-EVK Evaluation Kit (pdf)

FAQs

How do we interface camera to the AT91SAM9G45-EVK Evaluation Kit?

The 'J9' Extended interface is used for the CMOS camera interface.

How do I connect the ARM JTAG Emulator to the AT91SAM9G45-EVK Evaluation Kit?

Using the standard 10-pin JTAG connector on the AT91SAM9G45-EVK ARM9 Board, you can connect with any ARM JTAG Emulator such as ULINK2, Jlink etc.

Do we need to set the Serial Port Receive Settings in the PC?

Tags: at91sam9g45, primary_platforms, mcu, development_platforms_kits, embest

Evaluation Kit for AT91SAM9G45

e14-publisher — Mon, 18 Oct 2021 20:15:20 GMT

Revision 1 posted to Documents by e14-publisher on 10/18/2021 8:15:20 PM

Evaluation Kit for AT91SAM9G45

Manufactured By:Embest

Part Number:AT91SAM9G45-EVK

Buy Now

In addition, the board supports Linux, WinCE and offers plenty of example applications for all three, makes it easy for engineers to develop their project based on this AT91SAM9G45 processor.

Software Features:

WinCE 6.0 OS Mapping, and the FirstBoot and Eboot set up from NAND Flash
Linux 2.6.30 source code and mapping, and the UBoot set up from NAND Flash
Audio output test program
NandFlash read/write test program
NorFlash read/write test program
DDR2 SDRAM read/write test program
DataFlash read/write test program
EEPROM read/write test program
RTT Realtime timer test program
RTC Realtime timer test program
TWI Test program
DMA transfer test program
DBGU Serial interface communication test program
Ethernet test program
USB test program
Micro SD Card Read/Write test program
SD/MMC Card Read/Write test program

Key Applications: Industrial and building control, HVAC, POS terminals, Alarm systems, Printers, Medical Appliances.

Features

Support Linux2.6 and WinCE6.0 OS, with free relevant board support packages (BSPs)
CPU: Atmel AT91SAM9G45 (ARM926EJ-S Core), 400MHz
On-chip memory: 64KB ROM & 64KB SRAM
External memory: 256MBNandFlash, 2MB NorFlash, 4MB DataFlash & two 64MB DDR2 SDRAM
Four UART interfaces
One high-speed USB Host Port
One high-speed Host Device Port
One JTAG Debug Interface
One 10/100 Ethernet interface
One SD/MMC card interface
One Micro SD card interface
One IIS Audio output port
One IIS Audio input port
Two User buttons
One Wake-up button
One Reset button
One User LED
One Power LED
60 I/O Pins User Extension Interface
Power: 5VDC from connector, with back-up battery on board
Working temperature: -10 to 70 Deg C
Dimension: 120 x 90 mm

Ships With

AT91SAM9G45-EVK Board - Target board; CPU: AT91SAM9G45
IDC10 Cable - 10-10pins, 10cm, gap:2.00mm
Mini USB Cable - To supply power to the board or for downloading programs and debug
10/100 Ethernet Cable - Connect to the network
DB9-IDC10 Cable - DB9(F) to IDC(10 pins) cable
20Pins-10Pins JTAG Converter - Connect with 20pins or 10pins JTAG Debug Cables
TFT LCD Panel - 4.3 inch QVGA 480x272 LCD panel with resistive touch screen
Power Adapter - 12V, 1.25A, supply power to the board