Embedded Display Module based on LPC1857FET256

e14-publisher — Fri, 05 May 2023 15:49:38 GMT

Current Revision posted to Documents by e14-publisher on 5/5/2023 3:49:38 PM

Embedded Display Module based on LPC1857FET256

Manufactured By:Embest

Part Number:EDM1070BR-01

Buy Now

EDM1070BR-01 is an embedded display module based on 32-bit ARM Cortex-M4/M0 Dual Core Microcontroller LPC1857FET256ï¼Œrunning at frequencies of up to 204MHz.

EDM1070xx is an embedded display module designed by Shenzhen Embest Technology and built on LPC4357FET256 ,NXP 32-bit ARM Cortex-M3 MCU (EDM1070BR-01). EDM1070xx is provided along with example applications for all the on-board devices and support to real-time operations systems. It has a variety of expansion interfaces such as UART, CAN, SPI, SGPIO, I2C, GPIO and AD/DA to satisfy different application requirements of users.

MINI1857 is an embedded core module built on LPC1857FET256 - a 32bit ARM Cortex-M3 microcontroller. By using it with an expansion board from Embest (EDM1070xx or EDM1043xx) or other dedicatedly designed boards built according to hardware interfaces of MINI1857, users can implement a quick function trimming so as to realize a shorter time to market.

The LPC1857 are ARM Cortex-M3 based microcontrollers for embedded applications. The ARM Cortex-M3 is a next generation core that offers system enhancements such as low power consumption, enhanced debug features, and a high level of support block integration.

The LPC1857 operate at CPU frequencies of up to 180 MHz. The ARM Cortex-M3 CPU incorporates a 3-stage pipeline and uses a Harvard architecture with separate local instruction and data buses as well as a third bus for peripherals. The ARM Cortex-M3 CPU also includes an internal prefetch unit that supports speculative branching.

The LPC1857 include up to 1 MB of flash and 136 kB of on-chip SRAM, 16 kB of EEPROM memory, a quad SPI Flash Interface (SPIFI), a State Configurable Timer (SCT) subsystem, two High-speed USB controllers, Ethernet, LCD, an external memory controller, and multiple digital and analog peripherals.

Key Applications: instrumentation, intelligent home, medical diagnosis and motor control.

Features

Product features

Based on 32-bit ARM Cortex-M4/M0 Dual Core Microcontroller LPC1857FET256, running at frequencies of up to 204MHz
CPU Internal 1024Kbytes of Flash, 136 Kbytes of SRAM and 16 Kbytes of EEPROM
On board 128MB Nand Flash, 32MB SDRAM, 4MB SPI Flash (reserved), 2Kb EEPROM
7inch (Resolution:800×480) TFT LCD touch screen
Follow EMC, FCC, 3C design standard, performance and index meet related standards
Fruitful expansion communication interfaces:
- 3 x 3 line serial port ,RS232 voltage
- One USB2.0 HS Deriver port, one USB2.0 FS Host port
- One Micro SD card interface
- One 10/100Mbps Ethernet port
- One RS485 port, two CAN 2.0B ports, one SPI bus, 1 I2C bus
Four input and four output I/O interfaces implemented with isolated by optocouplers
Support FatFs_vR0.08a file system (for SD card)
Support uC/OS-II_v2.91 OS & emWin5.18 graphical interfaces
Support LwIP_v1.4.0 protocol stack
Support SPI to serial port module (up to 4 serial ports)
Support 1.3 mega pixel OV9655 Camera module (SGPIO interface)

Hardware

Processor

NXP LPC1857FET256
Integrating hardware a floating-point unit
Integrating a 1024KB Flash, a136 KB SRAM and a 16KB EEPROM
Integrating a LCD controller with support of 24bpp true-color mode and a resolution of up to 1024×768
An USB 2.0 high-speed Host/Device/OTG interface with on-chip PHY and support of DMA transmission
An USB 2.0 high-speed Host/Device interface with on-chip PHY and ULPI which support external high-speed PHY
A 10/100 Mbits Ethernet MAC MII/RMII interface
A four-wire SPI flash interface (SPIFI) with data transfer rate of up to 40Mbps per channel
Two CAN 2.0B, four UART, two I2S, two I2C, two SSP, one SPI buses
Four 32-bit general purpose timer, two standard PWM, one motor control PWM with Quadrature encoder interface
400KHz Two 10-bit ADCs operating at up to 400KHz, one 10-bit DAC operating at up to 400KHz
Serial GPIO interface (SGPIO)
164 general-purpose I/O interfaces
Two watchdog timers

On-Board Memories

128MB NandFlash
32MB SDRAM
2Kb EEPROM
4Mb SPI Flash (spare solder pads)

Communication Interface

Three serial interface implemented with phoenix connectors
UART0: 3-wire serial interface, RS232 level
UART2: 3-wire serial interface, RS232 level
UART3: 3-wire serial interface, RS232 level
One RS485 interface implemented with phoenix connectors
Two CAN2.0B interfaces implemented with phoenix connectors
Two USB interfaces
USB2.0 Device×1, High-speed, 480Mbps
USB2.0 Host×1, Full-speed, 12Mbps
One 10/100Mbps Ethernet interface
One TF card slot
One 20-pin standard JTAG debug interface
Four input and four output I/O interfaces implemented with phoenix connectors and isolated by optocouplers
One 8-channel ADC interface
One DAC interface
One SPIFI interface
One IIC interface
One I2S interface
One high-precision RTC (no battery by default)
Spare interface for external hardware watchdog

Others

7-inch (800*480) TFT LCD, 16bit RGB565 mode, supporting 4-wire resistive touch-screen
One ISP button
One buzzer
One 5V power output interface

Electrical Features

Operating Temperature: 0°C ~ 70°C
Storage Temperature: -40 °C ~ 85 °C
Operating Humidity: 0% ~ 90% (Non-condensing)
Power Supply: DC 9~24V, 150~400mA@12V
Electrical Standards: CE, FCC and CCC
PCB Layers: 6-layer PCB

Ships With

EDM1070BR-01 board (MINI1857 Core Board, 7 inch LCD & TSP)
CD (User manual, Source code and Development tools and etc)
Four hexagonal screws & nuts

Required Tools

Accessory Tools

Documents

Tags: primary_platforms, mcu, development_platforms_kits, embest, lpc1857fet256

Embedded Display Module based on LPC1857FET256

e14-publisher — Thu, 16 Dec 2021 23:22:27 GMT

Revision 3 posted to Documents by e14-publisher on 12/16/2021 11:22:27 PM

Embedded Display Module based on LPC1857FET256

Manufactured By:Embest

Part Number:EDM1070BR-01

Buy Now

EDM1070BR-01 is an embedded display module based on 32-bit ARM Cortex-M4/M0 Dual Core Microcontroller LPC1857FET256ï¼Œrunning at frequencies of up to 204MHz.

Key Applications: instrumentation, intelligent home, medical diagnosis and motor control.

Features

Product features

Based on 32-bit ARM Cortex-M4/M0 Dual Core Microcontroller LPC1857FET256, running at frequencies of up to 204MHz
CPU Internal 1024Kbytes of Flash, 136 Kbytes of SRAM and 16 Kbytes of EEPROM
On board 128MB Nand Flash, 32MB SDRAM, 4MB SPI Flash (reserved), 2Kb EEPROM
7inch (Resolution:800×480) TFT LCD touch screen
Follow EMC, FCC, 3C design standard, performance and index meet related standards
Fruitful expansion communication interfaces:
- 3 x 3 line serial port ,RS232 voltage
- One USB2.0 HS Deriver port, one USB2.0 FS Host port
- One Micro SD card interface
- One 10/100Mbps Ethernet port
- One RS485 port, two CAN 2.0B ports, one SPI bus, 1 I2C bus
Four input and four output I/O interfaces implemented with isolated by optocouplers
Support FatFs_vR0.08a file system (for SD card)
Support uC/OS-II_v2.91 OS & emWin5.18 graphical interfaces
Support LwIP_v1.4.0 protocol stack
Support SPI to serial port module (up to 4 serial ports)
Support 1.3 mega pixel OV9655 Camera module (SGPIO interface)

Hardware

Processor

NXP LPC1857FET256
Integrating hardware a floating-point unit
Integrating a 1024KB Flash, a136 KB SRAM and a 16KB EEPROM
Integrating a LCD controller with support of 24bpp true-color mode and a resolution of up to 1024×768
An USB 2.0 high-speed Host/Device/OTG interface with on-chip PHY and support of DMA transmission
An USB 2.0 high-speed Host/Device interface with on-chip PHY and ULPI which support external high-speed PHY
A 10/100 Mbits Ethernet MAC MII/RMII interface
A four-wire SPI flash interface (SPIFI) with data transfer rate of up to 40Mbps per channel
Two CAN 2.0B, four UART, two I2S, two I2C, two SSP, one SPI buses
Four 32-bit general purpose timer, two standard PWM, one motor control PWM with Quadrature encoder interface
400KHz Two 10-bit ADCs operating at up to 400KHz, one 10-bit DAC operating at up to 400KHz
Serial GPIO interface (SGPIO)
164 general-purpose I/O interfaces
Two watchdog timers

On-Board Memories

128MB NandFlash
32MB SDRAM
2Kb EEPROM
4Mb SPI Flash (spare solder pads)

Communication Interface

Three serial interface implemented with phoenix connectors
UART0: 3-wire serial interface, RS232 level
UART2: 3-wire serial interface, RS232 level
UART3: 3-wire serial interface, RS232 level
One RS485 interface implemented with phoenix connectors
Two CAN2.0B interfaces implemented with phoenix connectors
Two USB interfaces
USB2.0 Device×1, High-speed, 480Mbps
USB2.0 Host×1, Full-speed, 12Mbps
One 10/100Mbps Ethernet interface
One TF card slot
One 20-pin standard JTAG debug interface
Four input and four output I/O interfaces implemented with phoenix connectors and isolated by optocouplers
One 8-channel ADC interface
One DAC interface
One SPIFI interface
One IIC interface
One I2S interface
One high-precision RTC (no battery by default)
Spare interface for external hardware watchdog

Others

7-inch (800*480) TFT LCD, 16bit RGB565 mode, supporting 4-wire resistive touch-screen
One ISP button
One buzzer
One 5V power output interface

Electrical Features

Operating Temperature: 0°C ~ 70°C
Storage Temperature: -40 °C ~ 85 °C
Operating Humidity: 0% ~ 90% (Non-condensing)
Power Supply: DC 9~24V, 150~400mA@12V
Electrical Standards: CE, FCC and CCC
PCB Layers: 6-layer PCB

Ships With

EDM1070BR-01 board (MINI1857 Core Board, 7 inch LCD & TSP)
CD (User manual, Source code and Development tools and etc)
Four hexagonal screws & nuts

Required Tools

Accessory Tools

Documents

Application Note

Application Note (AN11196) for LPC4300 camera interface design using SGPIO (zip)

Application Note (AN11206) for Using SPIFI on LPC1800 and LPC4300 (zip)

Application Note (AN11210 ) for Using SGPIO to emulate an SPI master interface (zip)

Application Note (AN11229) for UUencoding for UART ISP (pdf)

Application Note (AN11275 ) for SGPIO on the LPC4300 (zip)

Application Note (AN11343) for SGPIO camera module design using LPC4300 (zip)

Application Note (AN11351) for Implementing a UART using SGPIO on LPC4300 (zip)

Application Note (AN11508) for SDRAM interface to LPC18xx/43xx EMC (pdf)

Data Sheet

Datasheet for LPC435X/3X/2X/1X 32-bit ARM Cortex-M4/M0 MCU (pdf)

User Manual/Guide

User Guide for EDM1070XX Embedded Display Module (pdf)

User Manual (UM10503) for LPC43xx ARM Cortex-M4/M0 multi-core microcontroller (pdf)

Tags: primary_platforms, mcu, development_platforms_kits, embest, lpc1857fet256

Embedded Display Module based on LPC1857FET256

e14-publisher — Thu, 16 Dec 2021 03:08:57 GMT

Revision 2 posted to Documents by e14-publisher on 12/16/2021 3:08:57 AM

Embedded Display Module based on LPC1857FET256

Manufactured By:Embest

Part Number:EDM1070BR-01

Buy Now

EDM1070BR-01 is an embedded display module based on 32-bit ARM Cortex-M4/M0 Dual Core Microcontroller LPC1857FET256ï¼Œrunning at frequencies of up to 204MHz.

Key Applications: instrumentation, intelligent home, medical diagnosis and motor control.

Features

Product features

Based on 32-bit ARM Cortex-M4/M0 Dual Core Microcontroller LPC1857FET256, running at frequencies of up to 204MHz
CPU Internal 1024Kbytes of Flash, 136 Kbytes of SRAM and 16 Kbytes of EEPROM
On board 128MB Nand Flash, 32MB SDRAM, 4MB SPI Flash (reserved), 2Kb EEPROM
7inch (Resolution:800×480) TFT LCD touch screen
Follow EMC, FCC, 3C design standard, performance and index meet related standards
Fruitful expansion communication interfaces:
- 3 x 3 line serial port ,RS232 voltage
- One USB2.0 HS Deriver port, one USB2.0 FS Host port
- One Micro SD card interface
- One 10/100Mbps Ethernet port
- One RS485 port, two CAN 2.0B ports, one SPI bus, 1 I2C bus
Four input and four output I/O interfaces implemented with isolated by optocouplers
Support FatFs_vR0.08a file system (for SD card)
Support uC/OS-II_v2.91 OS & emWin5.18 graphical interfaces
Support LwIP_v1.4.0 protocol stack
Support SPI to serial port module (up to 4 serial ports)
Support 1.3 mega pixel OV9655 Camera module (SGPIO interface)

Hardware

Processor

NXP LPC1857FET256
Integrating hardware a floating-point unit
Integrating a 1024KB Flash, a136 KB SRAM and a 16KB EEPROM
Integrating a LCD controller with support of 24bpp true-color mode and a resolution of up to 1024×768
An USB 2.0 high-speed Host/Device/OTG interface with on-chip PHY and support of DMA transmission
An USB 2.0 high-speed Host/Device interface with on-chip PHY and ULPI which support external high-speed PHY
A 10/100 Mbits Ethernet MAC MII/RMII interface
A four-wire SPI flash interface (SPIFI) with data transfer rate of up to 40Mbps per channel
Two CAN 2.0B, four UART, two I2S, two I2C, two SSP, one SPI buses
Four 32-bit general purpose timer, two standard PWM, one motor control PWM with Quadrature encoder interface
400KHz Two 10-bit ADCs operating at up to 400KHz, one 10-bit DAC operating at up to 400KHz
Serial GPIO interface (SGPIO)
164 general-purpose I/O interfaces
Two watchdog timers

On-Board Memories

128MB NandFlash
32MB SDRAM
2Kb EEPROM
4Mb SPI Flash (spare solder pads)

Communication Interface

Three serial interface implemented with phoenix connectors
UART0: 3-wire serial interface, RS232 level
UART2: 3-wire serial interface, RS232 level
UART3: 3-wire serial interface, RS232 level
One RS485 interface implemented with phoenix connectors
Two CAN2.0B interfaces implemented with phoenix connectors
Two USB interfaces
USB2.0 Device×1, High-speed, 480Mbps
USB2.0 Host×1, Full-speed, 12Mbps
One 10/100Mbps Ethernet interface
One TF card slot
One 20-pin standard JTAG debug interface
Four input and four output I/O interfaces implemented with phoenix connectors and isolated by optocouplers
One 8-channel ADC interface
One DAC interface
One SPIFI interface
One IIC interface
One I2S interface
One high-precision RTC (no battery by default)
Spare interface for external hardware watchdog

Others

7-inch (800*480) TFT LCD, 16bit RGB565 mode, supporting 4-wire resistive touch-screen
One ISP button
One buzzer
One 5V power output interface

Electrical Features

Operating Temperature: 0°C ~ 70°C
Storage Temperature: -40 °C ~ 85 °C
Operating Humidity: 0% ~ 90% (Non-condensing)
Power Supply: DC 9~24V, 150~400mA@12V
Electrical Standards: CE, FCC and CCC
PCB Layers: 6-layer PCB

Ships With

EDM1070BR-01 board (MINI1857 Core Board, 7 inch LCD & TSP)
CD (User manual, Source code and Development tools and etc)
Four hexagonal screws & nuts

Required Tools

Accessory Tools

Documents

Application Note

Application Note (AN11196) for LPC4300 camera interface design using SGPIO (zip)

Application Note (AN11206) for Using SPIFI on LPC1800 and LPC4300 (zip)

Application Note (AN11210 ) for Using SGPIO to emulate an SPI master interface (zip)

Application Note (AN11229) for UUencoding for UART ISP (pdf)

Application Note (AN11275 ) for SGPIO on the LPC4300 (zip)

Application Note (AN11343) for SGPIO camera module design using LPC4300 (zip)

Application Note (AN11351) for Implementing a UART using SGPIO on LPC4300 (zip)

Application Note (AN11508) for SDRAM interface to LPC18xx/43xx EMC (pdf)

Data Sheet

Datasheet for LPC435X/3X/2X/1X 32-bit ARM Cortex-M4/M0 MCU (pdf)

User Manual/Guide

User Guide for EDM1070XX Embedded Display Module (pdf)

User Manual (UM10503) for LPC43xx ARM Cortex-M4/M0 multi-core microcontroller (pdf)

Tags: primary_platforms, mcu, development_platforms_kits, embest, lpc1857fet256

Embedded Display Module based on LPC1857FET256

e14-publisher — Mon, 18 Oct 2021 20:15:37 GMT

Revision 1 posted to Documents by e14-publisher on 10/18/2021 8:15:37 PM

Embedded Display Module based on LPC1857FET256

Manufactured By:Embest

Part Number:EDM1070BR-01

Buy Now

EDM1070BR-01 is an embedded display module based on 32-bit ARM Cortex-M4/M0 Dual Core Microcontroller LPC1857FET256ï¼Œrunning at frequencies of up to 204MHz.

Key Applications: instrumentation, intelligent home, medical diagnosis and motor control.

Features

Product features

Based on 32-bit ARM Cortex-M4/M0 Dual Core Microcontroller LPC1857FET256, running at frequencies of up to 204MHz
CPU Internal 1024Kbytes of Flash, 136 Kbytes of SRAM and 16 Kbytes of EEPROM
On board 128MB Nand Flash, 32MB SDRAM, 4MB SPI Flash (reserved), 2Kb EEPROM
7inch (Resolution:800×480) TFT LCD touch screen
Follow EMC, FCC, 3C design standard, performance and index meet related standards
Fruitful expansion communication interfaces:
- 3 x 3 line serial port ,RS232 voltage
- One USB2.0 HS Deriver port, one USB2.0 FS Host port
- One Micro SD card interface
- One 10/100Mbps Ethernet port
- One RS485 port, two CAN 2.0B ports, one SPI bus, 1 I2C bus
Four input and four output I/O interfaces implemented with isolated by optocouplers
Support FatFs_vR0.08a file system (for SD card)
Support uC/OS-II_v2.91 OS & emWin5.18 graphical interfaces
Support LwIP_v1.4.0 protocol stack
Support SPI to serial port module (up to 4 serial ports)
Support 1.3 mega pixel OV9655 Camera module (SGPIO interface)

Hardware

Processor

NXP LPC1857FET256
Integrating hardware a floating-point unit
Integrating a 1024KB Flash, a136 KB SRAM and a 16KB EEPROM
Integrating a LCD controller with support of 24bpp true-color mode and a resolution of up to 1024×768
An USB 2.0 high-speed Host/Device/OTG interface with on-chip PHY and support of DMA transmission
An USB 2.0 high-speed Host/Device interface with on-chip PHY and ULPI which support external high-speed PHY
A 10/100 Mbits Ethernet MAC MII/RMII interface
A four-wire SPI flash interface (SPIFI) with data transfer rate of up to 40Mbps per channel
Two CAN 2.0B, four UART, two I2S, two I2C, two SSP, one SPI buses
Four 32-bit general purpose timer, two standard PWM, one motor control PWM with Quadrature encoder interface
400KHz Two 10-bit ADCs operating at up to 400KHz, one 10-bit DAC operating at up to 400KHz
Serial GPIO interface (SGPIO)
164 general-purpose I/O interfaces
Two watchdog timers

On-Board Memories

128MB NandFlash
32MB SDRAM
2Kb EEPROM
4Mb SPI Flash (spare solder pads)

Communication Interface

Three serial interface implemented with phoenix connectors
UART0: 3-wire serial interface, RS232 level
UART2: 3-wire serial interface, RS232 level
UART3: 3-wire serial interface, RS232 level
One RS485 interface implemented with phoenix connectors
Two CAN2.0B interfaces implemented with phoenix connectors
Two USB interfaces
USB2.0 Device×1, High-speed, 480Mbps
USB2.0 Host×1, Full-speed, 12Mbps
One 10/100Mbps Ethernet interface
One TF card slot
One 20-pin standard JTAG debug interface
Four input and four output I/O interfaces implemented with phoenix connectors and isolated by optocouplers
One 8-channel ADC interface
One DAC interface
One SPIFI interface
One IIC interface
One I2S interface
One high-precision RTC (no battery by default)
Spare interface for external hardware watchdog