dsPICDEM MCLV-2 Development Board

e14-publisher — Fri, 05 May 2023 15:50:45 GMT

Current Revision posted to Documents by e14-publisher on 5/5/2023 3:50:45 PM

dsPICDEM MCLV-2 Development Board

Manufactured By:Microchip

Part Number:DM330021-2

Buy Now

The dsPICDEMTM MCLV-2 Development Board provides a cost-effective method of evaluating and developing sensored or sensorless Brushless DC (BLDC) and permanent magnet synchronous motor control applications. The board supports Microchip’s 28-pin SOIC and 100-pin Plug-In-Modules with dsPIC33E or dsPIC33F Digital Signal Controllers. The board supports the use of the internal, on chip OpAmps found on certain dsPIC devices or the external OpAmps found on the MCLV-2 board.

A dsPIC33EP256MC506 Internal OpAmp PIM (MA330031) is included. The board is capable of controlling motors rated up to 48V and 15 Amps, with multiple communication channels such as USB, CAN, LIN and RS-232.

The dsPICDEMTM MCLV-2 Development Board is targeted to control a Brushless DC (BLDC) motor or Permanent Magnet Synchronous Motor (PMSM) in sensor or sensorless operation. This flexible and cost-effective board can be configured in different ways for use with Microchip’s specialized motor control digital signal controllers.

The dsPICDEMTM MCLV-2 Development Board supports the dsPIC33E or dsPIC33F motor control device family. It offers a mounting option to connect either a 28-pin SOIC device or a generic 100-pin Plug-In Module (PIM).

Note: The MCLV-2(DM330021-2) replaces the previous MCLV (DM330021) and is fully backwards compatible with the previous MCLV(DM330021) and all motor control PIMs

Features

Motor Control Interfaces:
- Three-phase inverter bridge with a power rating of 48V/15A
- Ability to use internal OpAmps found on certain dsPIC33E devices or external OpAmps on the MCLV-2 board for current sensing
- Hall sensors/quadrature encoder interface for sensored motor control
- Phase voltage feedback for sensorless BLDC operation
- DC bus current sense resistor for single shunt vector control
- Phase current sense resistor for dual shunt vector control
- Overcurrent protection
- Input/output control switches
- Potentiometer
- LED indicator for PWM outputs

Power Supply Connectors:
- Auxiliary power tab “fast-on” connectors for the controller and power stage
- 24V power input connector for the controller
- Dedicated power input connector for the power stage
Communication Interfaces:
- CAN interface port
- LIN interface port
- UART communication via USB
- UART communication via RS-232
Programming Interfaces:
- ICSP™ connector for programming a dsPIC DSC device
- RJ11 connector for programming a dsPIC DSC device
- ICSP connector for programming the PIC18LF2450 USB to UART bridge

Full Backwards Compatibility with MCLV

Ships With

dsPICDEM MCLV-2 Development Board
dsPIC33EP256MC506 Internal OpAmp PIM
Matrix board to configure the MCLV-2 for internal, on chip OpAmp use
Matrix board to configure the MCLV-2 for external, on board OpAmp use

Required Tools

Accessory Tools

Documents

Application Note

Application Note (AN957) For Sensored BLDC Motor Control Using dsPIC30F2010 (pdf)

Application Note (AN1017) on Sinusoidal Control of PMSM Motors with dsPIC30F / dsPIC33F/ dsPIC33E DSC (pdf)

Application Note (AN1078) on Sensorless Field Oriented Control of a PMSM (pdf)

Application Note (AN1160) For Sensorless BLDC Control with Back-EMF Filtering Using a Majority Function (pdf)

Application Note (AN1292) For Sensorless Field Oriented Control (FOC) for a Permanent Magnet Synchronous Motor (PMSM)Using a PLL Estimator and Field Weakening (FW) (pdf)

Data Sheet

Datasheet For AC300020 24V 3-Phase Brushless DC Motor (pdf)

Datasheet For AC300022 24V 3-Phase Brushless DC Motor with Encoder (pdf)

Product Brief/Fact sheet

Motor Control and Drive Brochure (pdf)

Information Sheet For dsPIC33FJ256MC710 100-pin to 100-pin TQFP Plug-In Module (PIM) (pdf)

Product Brief For ETN 33 (pdf)

Quick Start Guide

Quick Guide to Microchip Development Tools (pdf)

User Manual/Guide

User Guide For dsPICDEM MCLV Development Board (pdf)

User Guide Real-Time Data Monitor (pdf)

User Guide For Real Time Data Monitor (pdf)

User Guide For dsPICDEM MCLV-2 (DM330021-2) Development Board (pdf)

Downloads

Drivers

Updated USB Driver for win2k, xp, vista (zip)

Tags: microchip, primary_platforms, dspicdem, mcu, MCLV-2, development_platforms_kits

dsPICDEM MCLV-2 Development Board

e14-publisher — Thu, 16 Dec 2021 23:23:32 GMT

Revision 3 posted to Documents by e14-publisher on 12/16/2021 11:23:32 PM

dsPICDEM MCLV-2 Development Board

Manufactured By:Microchip

Part Number:DM330021-2

Buy Now

Note: The MCLV-2(DM330021-2) replaces the previous MCLV (DM330021) and is fully backwards compatible with the previous MCLV(DM330021) and all motor control PIMs

Features

Motor Control Interfaces:
- Three-phase inverter bridge with a power rating of 48V/15A
- Ability to use internal OpAmps found on certain dsPIC33E devices or external OpAmps on the MCLV-2 board for current sensing
- Hall sensors/quadrature encoder interface for sensored motor control
- Phase voltage feedback for sensorless BLDC operation
- DC bus current sense resistor for single shunt vector control
- Phase current sense resistor for dual shunt vector control
- Overcurrent protection
- Input/output control switches
- Potentiometer
- LED indicator for PWM outputs

Power Supply Connectors:
- Auxiliary power tab “fast-on” connectors for the controller and power stage
- 24V power input connector for the controller
- Dedicated power input connector for the power stage
Communication Interfaces:
- CAN interface port
- LIN interface port
- UART communication via USB
- UART communication via RS-232
Programming Interfaces:
- ICSP™ connector for programming a dsPIC DSC device
- RJ11 connector for programming a dsPIC DSC device
- ICSP connector for programming the PIC18LF2450 USB to UART bridge

Full Backwards Compatibility with MCLV

Ships With

dsPICDEM MCLV-2 Development Board
dsPIC33EP256MC506 Internal OpAmp PIM
Matrix board to configure the MCLV-2 for internal, on chip OpAmp use
Matrix board to configure the MCLV-2 for external, on board OpAmp use

Required Tools

Accessory Tools

Documents

Application Note

Application Note (AN957) For Sensored BLDC Motor Control Using dsPIC30F2010 (pdf)

Application Note (AN1017) on Sinusoidal Control of PMSM Motors with dsPIC30F / dsPIC33F/ dsPIC33E DSC (pdf)

Application Note (AN1078) on Sensorless Field Oriented Control of a PMSM (pdf)

Application Note (AN1160) For Sensorless BLDC Control with Back-EMF Filtering Using a Majority Function (pdf)

Application Note (AN1292) For Sensorless Field Oriented Control (FOC) for a Permanent Magnet Synchronous Motor (PMSM)Using a PLL Estimator and Field Weakening (FW) (pdf)

Data Sheet

Datasheet For AC300020 24V 3-Phase Brushless DC Motor (pdf)

Datasheet For AC300022 24V 3-Phase Brushless DC Motor with Encoder (pdf)

Product Brief/Fact sheet

Motor Control and Drive Brochure (pdf)

Information Sheet For dsPIC33FJ256MC710 100-pin to 100-pin TQFP Plug-In Module (PIM) (pdf)

Product Brief For ETN 33 (pdf)

Quick Start Guide

Quick Guide to Microchip Development Tools (pdf)

User Manual/Guide

User Guide For dsPICDEM MCLV Development Board (pdf)

User Guide Real-Time Data Monitor (pdf)

User Guide For Real Time Data Monitor (pdf)

User Guide For dsPICDEM MCLV-2 (DM330021-2) Development Board (pdf)

Downloads

Drivers

Updated USB Driver for win2k, xp, vista (zip)

Tags: microchip, primary_platforms, dspicdem, mcu, MCLV-2, development_platforms_kits

dsPICDEM MCLV-2 Development Board

e14-publisher — Thu, 16 Dec 2021 03:10:09 GMT

Revision 2 posted to Documents by e14-publisher on 12/16/2021 3:10:09 AM

dsPICDEM MCLV-2 Development Board

Manufactured By:Microchip

Part Number:DM330021-2

Buy Now

Note: The MCLV-2(DM330021-2) replaces the previous MCLV (DM330021) and is fully backwards compatible with the previous MCLV(DM330021) and all motor control PIMs

Features

Motor Control Interfaces:
- Three-phase inverter bridge with a power rating of 48V/15A
- Ability to use internal OpAmps found on certain dsPIC33E devices or external OpAmps on the MCLV-2 board for current sensing
- Hall sensors/quadrature encoder interface for sensored motor control
- Phase voltage feedback for sensorless BLDC operation
- DC bus current sense resistor for single shunt vector control
- Phase current sense resistor for dual shunt vector control
- Overcurrent protection
- Input/output control switches
- Potentiometer
- LED indicator for PWM outputs

Power Supply Connectors:
- Auxiliary power tab “fast-on” connectors for the controller and power stage
- 24V power input connector for the controller
- Dedicated power input connector for the power stage
Communication Interfaces:
- CAN interface port
- LIN interface port
- UART communication via USB
- UART communication via RS-232
Programming Interfaces:
- ICSP™ connector for programming a dsPIC DSC device
- RJ11 connector for programming a dsPIC DSC device
- ICSP connector for programming the PIC18LF2450 USB to UART bridge

Full Backwards Compatibility with MCLV

Ships With

dsPICDEM MCLV-2 Development Board
dsPIC33EP256MC506 Internal OpAmp PIM
Matrix board to configure the MCLV-2 for internal, on chip OpAmp use
Matrix board to configure the MCLV-2 for external, on board OpAmp use

Required Tools

Accessory Tools

Documents

Application Note

Application Note (AN957) For Sensored BLDC Motor Control Using dsPIC30F2010 (pdf)

Application Note (AN1017) on Sinusoidal Control of PMSM Motors with dsPIC30F / dsPIC33F/ dsPIC33E DSC (pdf)

Application Note (AN1078) on Sensorless Field Oriented Control of a PMSM (pdf)

Application Note (AN1160) For Sensorless BLDC Control with Back-EMF Filtering Using a Majority Function (pdf)

Application Note (AN1292) For Sensorless Field Oriented Control (FOC) for a Permanent Magnet Synchronous Motor (PMSM)Using a PLL Estimator and Field Weakening (FW) (pdf)

Data Sheet

Datasheet For AC300020 24V 3-Phase Brushless DC Motor (pdf)

Datasheet For AC300022 24V 3-Phase Brushless DC Motor with Encoder (pdf)

Product Brief/Fact sheet

Motor Control and Drive Brochure (pdf)

Information Sheet For dsPIC33FJ256MC710 100-pin to 100-pin TQFP Plug-In Module (PIM) (pdf)

Product Brief For ETN 33 (pdf)

Quick Start Guide

Quick Guide to Microchip Development Tools (pdf)

User Manual/Guide

User Guide For dsPICDEM MCLV Development Board (pdf)

User Guide Real-Time Data Monitor (pdf)

User Guide For Real Time Data Monitor (pdf)

User Guide For dsPICDEM MCLV-2 (DM330021-2) Development Board (pdf)

Downloads

Drivers

Updated USB Driver for win2k, xp, vista (zip)

Tags: microchip, primary_platforms, dspicdem, mcu, MCLV-2, development_platforms_kits

dsPICDEM MCLV-2 Development Board

e14-publisher — Mon, 18 Oct 2021 20:16:26 GMT

Revision 1 posted to Documents by e14-publisher on 10/18/2021 8:16:26 PM

dsPICDEM MCLV-2 Development Board

Manufactured By:Microchip

Part Number:DM330021-2

Buy Now

Note: The MCLV-2(DM330021-2) replaces the previous MCLV (DM330021) and is fully backwards compatible with the previous MCLV(DM330021) and all motor control PIMs

Features

Motor Control Interfaces:
- Three-phase inverter bridge with a power rating of 48V/15A
- Ability to use internal OpAmps found on certain dsPIC33E devices or external OpAmps on the MCLV-2 board for current sensing
- Hall sensors/quadrature encoder interface for sensored motor control
- Phase voltage feedback for sensorless BLDC operation
- DC bus current sense resistor for single shunt vector control
- Phase current sense resistor for dual shunt vector control
- Overcurrent protection
- Input/output control switches
- Potentiometer
- LED indicator for PWM outputs

Power Supply Connectors:
- Auxiliary power tab “fast-on” connectors for the controller and power stage
- 24V power input connector for the controller
- Dedicated power input connector for the power stage
Communication Interfaces:
- CAN interface port
- LIN interface port
- UART communication via USB
- UART communication via RS-232
Programming Interfaces:
- ICSP™ connector for programming a dsPIC DSC device
- RJ11 connector for programming a dsPIC DSC device
- ICSP connector for programming the PIC18LF2450 USB to UART bridge