USB-Serial (Dual Channel) Development Kit

e14-publisher — Fri, 05 May 2023 15:50:50 GMT

Current Revision posted to Documents by e14-publisher on 5/5/2023 3:50:50 PM

USB-Serial (Dual Channel) Development Kit

Manufactured By:Cypress

Part Number:CYUSBS236

Buy Now

The CYUSBS236 DVK is designed as an easy-to-use kit, showcasing the unique features of Cypress's CY7C65215 USB-Serial bridge controller. This device includes CapSense® , Cypress's leading capacitive touch-sensing technology, and the Battery Charger Detect ion (BCD) feature, which is compliant with the USB Implementers Forum (USB-IF) Battery Charging Specification. This kit includes four EEPROMs to demonstrate I2C and SPI, two RS-232 line-drivers for UART, two CapSense touch buttons, and a Lithium ion (Li ) battery charger circuit. The CY7C65215 device supports bus-powered and self-powered modes and enables efficient system power management with suspend and remote wake-up signals.

CY7C65215 is the first full-speed USB-Serial bridge controller that offers a dual-channel configurable serial interface (UART/I2C/SPI). The controller also features Battery Charging Detection (BCD) and capacitive touch sensing at low suspend-state currents of 5 uA. The controller is offered in a 5x5-mm, features up to 19 pins for GPIO and is available in 32-pin QFN package to meet the dimensional requirements of portable devices. The controller is USB-IF certified with TID# 40860041.

Key Applications: Portable medical devices (like blood-glucose meters), Point-of-sales terminals, Serial Cables (including USB-to-UART and RS232 cables) and many other applications requiring USB connectivity.

Features

USB 2.0-certified, Full-Speed (12 Mbps)
- Supports communication driver class (CDC), personal health care device class (PHDC), and vendor-specific drivers
- BCD compliant with USB Battery Charging Specification, Rev. 1.2 (Peripheral Detect only)
- Integrated USB termination resistors
Two-channel configurable UART interface
- Data rates up to 3 Mbps
- 256 bytes for each transmit and receive buffer
- Data format:
  - 7 to 8 data bits
  - 1 to 2 stop bits
- No parity, even, odd, mark, or space parity
- Supports parity, overrun, and framing errors
- Supports flow control using Clear To Send (CTS), Request To Send (RTS), Data Terminal Ready (DTR), Data Set Ready (DSR)
Two-channel configurable SPI interface
- Master/slave up to 3 MHz
- Data width: 4 bits to 16 bits
- 256 bytes for each transmit and receive buffer
- Supports Motorola, TI, and National Semiconductor SPI modes
Two-channel configurable I2C interface
- Master/slave up to 400 kHz
- 256 bytes each transmit and receive buffer
- Supports multi-master I2C
CapSense
- SmartSense Auto-tuning enabled

Ships With

CYUSBS236 DVK board
Quick start guide
USB standard-A to micro-B cable
Jumper wires
Extra jumpers
5-V power supply adapter
CY7C65215-32LTXI sample silicon chips

Required Tools

Accessory Tools

Documents

Downloads

Design Package

CYUSBS236 USB-Serial (Dual Channel) Development Kit ISO (Create ISO) (iso)

CYUSBS236 USB-Serial (Dual Channel) Development Kit Setup only (Kit Design Files, Documentation) (exe)

Schematics/Layout Files

Schematic file for CYUSBS236 USB-Serial (Dual Channel) Development Kit (pdf)

Simulation Model/CAD Models

IBIS model for CY7C65211, CY7C65213, CY7C65215 Controllers (pdf)

Tags: primary_platforms, usb, mcu, development_platforms_kits, cypress

USB-Serial (Dual Channel) Development Kit

e14-publisher — Thu, 16 Dec 2021 23:23:38 GMT

Revision 3 posted to Documents by e14-publisher on 12/16/2021 11:23:38 PM

USB-Serial (Dual Channel) Development Kit

Manufactured By:Cypress

Part Number:CYUSBS236

Buy Now

Features

USB 2.0-certified, Full-Speed (12 Mbps)
- Supports communication driver class (CDC), personal health care device class (PHDC), and vendor-specific drivers
- BCD compliant with USB Battery Charging Specification, Rev. 1.2 (Peripheral Detect only)
- Integrated USB termination resistors
Two-channel configurable UART interface
- Data rates up to 3 Mbps
- 256 bytes for each transmit and receive buffer
- Data format:
  - 7 to 8 data bits
  - 1 to 2 stop bits
- No parity, even, odd, mark, or space parity
- Supports parity, overrun, and framing errors
- Supports flow control using Clear To Send (CTS), Request To Send (RTS), Data Terminal Ready (DTR), Data Set Ready (DSR)
Two-channel configurable SPI interface
- Master/slave up to 3 MHz
- Data width: 4 bits to 16 bits
- 256 bytes for each transmit and receive buffer
- Supports Motorola, TI, and National Semiconductor SPI modes
Two-channel configurable I2C interface
- Master/slave up to 400 kHz
- 256 bytes each transmit and receive buffer
- Supports multi-master I2C
CapSense
- SmartSense Auto-tuning enabled

Ships With

CYUSBS236 DVK board
Quick start guide
USB standard-A to micro-B cable
Jumper wires
Extra jumpers
5-V power supply adapter
CY7C65215-32LTXI sample silicon chips

Required Tools

Accessory Tools

Documents

Data Sheet

Datasheet for CY7C65215 USB-Serial Dual Channel (UART/I2/C/SPI) Bridge with CapSense and BCD (pdf)

Quick Start Guide

Quick Start Guide for CYUSBS236 USB-Serial (Dual Channel) Development Kit (pdf)

User Manual/Guide

User Guide for CYUSBS236 USB-Serial (Dual Channel) Development Kit (pdf)

Downloads

Design Package

CYUSBS236 USB-Serial (Dual Channel) Development Kit ISO (Create ISO) (iso)

CYUSBS236 USB-Serial (Dual Channel) Development Kit Setup only (Kit Design Files, Documentation) (exe)

Schematics/Layout Files

Schematic file for CYUSBS236 USB-Serial (Dual Channel) Development Kit (pdf)

Simulation Model/CAD Models

IBIS model for CY7C65211, CY7C65213, CY7C65215 Controllers (pdf)

Tags: primary_platforms, usb, mcu, development_platforms_kits, cypress

USB-Serial (Dual Channel) Development Kit

e14-publisher — Thu, 16 Dec 2021 03:10:15 GMT

Revision 2 posted to Documents by e14-publisher on 12/16/2021 3:10:15 AM

USB-Serial (Dual Channel) Development Kit

Manufactured By:Cypress

Part Number:CYUSBS236

Buy Now

Features

USB 2.0-certified, Full-Speed (12 Mbps)
- Supports communication driver class (CDC), personal health care device class (PHDC), and vendor-specific drivers
- BCD compliant with USB Battery Charging Specification, Rev. 1.2 (Peripheral Detect only)
- Integrated USB termination resistors
Two-channel configurable UART interface
- Data rates up to 3 Mbps
- 256 bytes for each transmit and receive buffer
- Data format:
  - 7 to 8 data bits
  - 1 to 2 stop bits
- No parity, even, odd, mark, or space parity
- Supports parity, overrun, and framing errors
- Supports flow control using Clear To Send (CTS), Request To Send (RTS), Data Terminal Ready (DTR), Data Set Ready (DSR)
Two-channel configurable SPI interface
- Master/slave up to 3 MHz
- Data width: 4 bits to 16 bits
- 256 bytes for each transmit and receive buffer
- Supports Motorola, TI, and National Semiconductor SPI modes
Two-channel configurable I2C interface
- Master/slave up to 400 kHz
- 256 bytes each transmit and receive buffer
- Supports multi-master I2C
CapSense
- SmartSense Auto-tuning enabled

Ships With

CYUSBS236 DVK board
Quick start guide
USB standard-A to micro-B cable
Jumper wires
Extra jumpers
5-V power supply adapter
CY7C65215-32LTXI sample silicon chips

Required Tools

Accessory Tools

Documents

Data Sheet

Datasheet for CY7C65215 USB-Serial Dual Channel (UART/I2/C/SPI) Bridge with CapSense and BCD (pdf)

Quick Start Guide

Quick Start Guide for CYUSBS236 USB-Serial (Dual Channel) Development Kit (pdf)

User Manual/Guide

User Guide for CYUSBS236 USB-Serial (Dual Channel) Development Kit (pdf)

Downloads

Design Package

CYUSBS236 USB-Serial (Dual Channel) Development Kit ISO (Create ISO) (iso)

CYUSBS236 USB-Serial (Dual Channel) Development Kit Setup only (Kit Design Files, Documentation) (exe)

Schematics/Layout Files

Schematic file for CYUSBS236 USB-Serial (Dual Channel) Development Kit (pdf)

Simulation Model/CAD Models

IBIS model for CY7C65211, CY7C65213, CY7C65215 Controllers (pdf)

Tags: primary_platforms, usb, mcu, development_platforms_kits, cypress

USB-Serial (Dual Channel) Development Kit

e14-publisher — Mon, 18 Oct 2021 20:16:31 GMT

Revision 1 posted to Documents by e14-publisher on 10/18/2021 8:16:31 PM

USB-Serial (Dual Channel) Development Kit

Manufactured By:Cypress

Part Number:CYUSBS236

Buy Now

Features

USB 2.0-certified, Full-Speed (12 Mbps)
- Supports communication driver class (CDC), personal health care device class (PHDC), and vendor-specific drivers
- BCD compliant with USB Battery Charging Specification, Rev. 1.2 (Peripheral Detect only)
- Integrated USB termination resistors
Two-channel configurable UART interface
- Data rates up to 3 Mbps
- 256 bytes for each transmit and receive buffer
- Data format:
  - 7 to 8 data bits
  - 1 to 2 stop bits
- No parity, even, odd, mark, or space parity
- Supports parity, overrun, and framing errors
- Supports flow control using Clear To Send (CTS), Request To Send (RTS), Data Terminal Ready (DTR), Data Set Ready (DSR)
Two-channel configurable SPI interface
- Master/slave up to 3 MHz
- Data width: 4 bits to 16 bits
- 256 bytes for each transmit and receive buffer
- Supports Motorola, TI, and National Semiconductor SPI modes
Two-channel configurable I2C interface
- Master/slave up to 400 kHz
- 256 bytes each transmit and receive buffer
- Supports multi-master I2C
CapSense
- SmartSense Auto-tuning enabled