PSoC 1 Low Power Kit based on CY8C24x93 MCU

e14-publisher — Fri, 05 May 2023 15:50:51 GMT

Current Revision posted to Documents by e14-publisher on 5/5/2023 3:50:51 PM

PSoC 1 Low Power Kit based on CY8C24x93 MCU

Manufactured By:Cypress

Part Number:CY8CKIT-PSOC-024LP

Buy Now

The Cypress PSoC 1 Low Power Kit is the latest Arduino hardware compatible shield development kit exclusively available from element14. The PSoC 1 Low Power Kit brings the power of PSoC to life in an ultra low power and low pin count configuration. This exclusive kit features Cypress’s new CY8C24x93 low power PSoC1 and provides users with advanced peripheral options in a low cost, low pin count package.

The PSoC 1 development kit can be both a standalone development kit or integrate and plug into any compatible Arduino development platform, such as the Uno, Due, and Mega boards. Users will develop applications using the PSoC Designer IDE platform.

The CY8C24x93 device is ideal for battery or handheld applications with a 1.1 mA current draw in Active Mode, 1.07 µA in Standby Mode, and 100nA in Deep Sleep Mode operation with the ability to wake up from an interrupt.

Low Power Operation
Supports 1.1 µA Standby Mode and a 100 nA Deep Sleep Mode with the ability to wake up from an interrupt. CY8C24x93 supports a wide operating range allowing full analog and digital operation from 1.71 to 5.5 V.

Lowest Cost PSoC 1 with USB
A Full Speed USB 2.0 part with 32K of Flash and SPI master is available at < $1.00, in high volumes. Connect your legacy systems through a serial bridge using the USB Slave and SPI master.

Intelligent Integration in Small Packages
Choose from packages as small as 3x3 mm2, 16-pin QFN that packs an ADC, 2x Comparators, 3x 16-bit Timers, and SPI / I2C slave for your ultra-portable low-power designs.

Features

Arduino Shield Design
CY8C24x93 device
Thermistor & Humidity Analog Sensors
Potentiometer
4 Segment LCD
IR LED for Remote Control
Powered through USB
Data logging through USB
Onboard Programmer
OCD connections for CY3215 ICE-Cube Programming and Debugging
Accessible open GPIO pins
Push Button (Reset and User Button)
CY8C24x93 device Highlights
- 8-bit Proprietary M8C CPU, Max operating frequency 24MHz
- 8 kB to 32 kB Flash, 2 kB SRAM
- 1.71 to 5.5V Operation
- 1.1 mA Active Mode, 1.07 µA Standby Mode, 100nA Deep Sleep Mode
- Full Speed USB 2.0, 10-bit ADC, 3x 16-bit Timers, 2x Comparators, 8-bit iDAC
Multiple host interfaces enabled through compatible header interfaces:
- Arduino UNO (through I2C, Thermistor and Humidity sensor pins are shared)
- PSoC 4 Pioneer kit (through I2C, Thermistor and Humidity sensor pins are shared)
- PMODs (Type 1, Type 2, Type 5 and Type 6)
- Beaglebone (through GPIOs, I2C and USB)
- Raspberry Pi (through GPIOs and I2C)

The PSoC1 Low Power Kit can also be used as an accessory board through an Arduino footprint compatible header that brings out:

Power & Ground
I2C
SPI
UART
Multiple GPIO

Ships With

PSoC 1 Low Power Kit board
Documentation – Quick Start Guide

Required Tools

Accessory Tools

Documents

Downloads

Sample Code

Sample Code for CY8CKIT-PSOC-024LP PSoC 1 Low Power Kit (zip)

Schematics/Layout Files

Schematic for PSoC1-LPK Development Kit Rev.04 (zip)

Simulation Model/CAD Models

IBIS Models for PSoC 1 CY8C24x93 Family (zip)

FAQs

Which IDE should I use to start developing applications with CY8CKIT-PSOC-024LP?

You should use PSoC Designer 5.4 and later version. It can be dowloaded for free from the below link -
www.cypress.com/go/psocdesigner

Can you please confirm if PSoC Designer 5.4 IDE is compatible with Windows 8 or not?

According to supplier, PSoC Designer 5.4 IDE supports windows 8. Along with windows 8 it is also compatible with earlier versions of windows like Windows XP (SP2 or higher), Vista or Windows 7.

How to update the firmware of onboard PSoC 3 programmer on CY8CKIT-PSOC-024LP?

Please refer page 11 of user manual in the below link. It explains how to upgrade firmware of onboard PSoC 3 programmer.

Link: http://www.element14.com/community/servlet/JiveServlet/downloadBody/65567-102-2-288090/e14_PSoC_1_Low_Power_User_Guide_rev1.0_020414.pdf

Do I have to purchase a C compiler for PSoC Designer?

PSoC Designer provides you an excellent free C compiler from Imagecraft with no code size restrictions or time limits. If you need additional code compression capability you can purchase the Imagecraft Pro Compiler through the Imagecraft web site: www.imagecraft.com

Is there a way to measure current consumption on PSoC in CY8CKIT-PSOC-024LP?

The PSoC 1 Low Power kit provides users with the ability to connect an ammeter or a multimeter to the board and measure current consumption on the PSoC. On the board there is a header with a jumper (CN5). This jumper can be removed and the user can connect the ammeter or multimeter in series to calculate the current consumption.

Tags: cy8c24x93, primary_platforms, mcu, development_platforms_kits, cypress, psoc

PSoC 1 Low Power Kit based on CY8C24x93 MCU

e14-publisher — Thu, 16 Dec 2021 23:23:39 GMT

Revision 3 posted to Documents by e14-publisher on 12/16/2021 11:23:39 PM

PSoC 1 Low Power Kit based on CY8C24x93 MCU

Manufactured By:Cypress

Part Number:CY8CKIT-PSOC-024LP

Buy Now

Features

Arduino Shield Design
CY8C24x93 device
Thermistor & Humidity Analog Sensors
Potentiometer
4 Segment LCD
IR LED for Remote Control
Powered through USB
Data logging through USB
Onboard Programmer
OCD connections for CY3215 ICE-Cube Programming and Debugging
Accessible open GPIO pins
Push Button (Reset and User Button)
CY8C24x93 device Highlights
- 8-bit Proprietary M8C CPU, Max operating frequency 24MHz
- 8 kB to 32 kB Flash, 2 kB SRAM
- 1.71 to 5.5V Operation
- 1.1 mA Active Mode, 1.07 µA Standby Mode, 100nA Deep Sleep Mode
- Full Speed USB 2.0, 10-bit ADC, 3x 16-bit Timers, 2x Comparators, 8-bit iDAC
Multiple host interfaces enabled through compatible header interfaces:
- Arduino UNO (through I2C, Thermistor and Humidity sensor pins are shared)
- PSoC 4 Pioneer kit (through I2C, Thermistor and Humidity sensor pins are shared)
- PMODs (Type 1, Type 2, Type 5 and Type 6)
- Beaglebone (through GPIOs, I2C and USB)
- Raspberry Pi (through GPIOs and I2C)

The PSoC1 Low Power Kit can also be used as an accessory board through an Arduino footprint compatible header that brings out:

Power & Ground
I2C
SPI
UART
Multiple GPIO

Ships With

PSoC 1 Low Power Kit board
Documentation – Quick Start Guide

Required Tools

Accessory Tools

Documents

Data Sheet

Datasheet for CY8C24X93 Low Power PSoC1 (pdf)

Reference Manual

PSoC® CY8C24x93 Family Technical Reference Manual (TRM) (pdf)

User Manual/Guide

User Manual for PSoC1-LPK Development Kit Rev1.0 (pdf)

Downloads

Sample Code

Sample Code for CY8CKIT-PSOC-024LP PSoC 1 Low Power Kit (zip)

Schematics/Layout Files

Schematic for PSoC1-LPK Development Kit Rev.04 (zip)

Simulation Model/CAD Models

IBIS Models for PSoC 1 CY8C24x93 Family (zip)

FAQs

Which IDE should I use to start developing applications with CY8CKIT-PSOC-024LP?

You should use PSoC Designer 5.4 and later version. It can be dowloaded for free from the below link -
www.cypress.com/go/psocdesigner

Can you please confirm if PSoC Designer 5.4 IDE is compatible with Windows 8 or not?

According to supplier, PSoC Designer 5.4 IDE supports windows 8. Along with windows 8 it is also compatible with earlier versions of windows like Windows XP (SP2 or higher), Vista or Windows 7.

How to update the firmware of onboard PSoC 3 programmer on CY8CKIT-PSOC-024LP?

Do I have to purchase a C compiler for PSoC Designer?

Is there a way to measure current consumption on PSoC in CY8CKIT-PSOC-024LP?

Tags: cy8c24x93, primary_platforms, mcu, development_platforms_kits, cypress, psoc

PSoC 1 Low Power Kit based on CY8C24x93 MCU

e14-publisher — Thu, 16 Dec 2021 03:10:16 GMT

Revision 2 posted to Documents by e14-publisher on 12/16/2021 3:10:16 AM

PSoC 1 Low Power Kit based on CY8C24x93 MCU

Manufactured By:Cypress

Part Number:CY8CKIT-PSOC-024LP

Buy Now

Features

Arduino Shield Design
CY8C24x93 device
Thermistor & Humidity Analog Sensors
Potentiometer
4 Segment LCD
IR LED for Remote Control
Powered through USB
Data logging through USB
Onboard Programmer
OCD connections for CY3215 ICE-Cube Programming and Debugging
Accessible open GPIO pins
Push Button (Reset and User Button)
CY8C24x93 device Highlights
- 8-bit Proprietary M8C CPU, Max operating frequency 24MHz
- 8 kB to 32 kB Flash, 2 kB SRAM
- 1.71 to 5.5V Operation
- 1.1 mA Active Mode, 1.07 µA Standby Mode, 100nA Deep Sleep Mode
- Full Speed USB 2.0, 10-bit ADC, 3x 16-bit Timers, 2x Comparators, 8-bit iDAC
Multiple host interfaces enabled through compatible header interfaces:
- Arduino UNO (through I2C, Thermistor and Humidity sensor pins are shared)
- PSoC 4 Pioneer kit (through I2C, Thermistor and Humidity sensor pins are shared)
- PMODs (Type 1, Type 2, Type 5 and Type 6)
- Beaglebone (through GPIOs, I2C and USB)
- Raspberry Pi (through GPIOs and I2C)

The PSoC1 Low Power Kit can also be used as an accessory board through an Arduino footprint compatible header that brings out:

Power & Ground
I2C
SPI
UART
Multiple GPIO

Ships With

PSoC 1 Low Power Kit board
Documentation – Quick Start Guide

Required Tools

Accessory Tools

Documents

Data Sheet

Datasheet for CY8C24X93 Low Power PSoC1 (pdf)

Reference Manual

PSoC® CY8C24x93 Family Technical Reference Manual (TRM) (pdf)

User Manual/Guide

User Manual for PSoC1-LPK Development Kit Rev1.0 (pdf)

Downloads

Sample Code

Sample Code for CY8CKIT-PSOC-024LP PSoC 1 Low Power Kit (zip)

Schematics/Layout Files

Schematic for PSoC1-LPK Development Kit Rev.04 (zip)

Simulation Model/CAD Models

IBIS Models for PSoC 1 CY8C24x93 Family (zip)

FAQs

Which IDE should I use to start developing applications with CY8CKIT-PSOC-024LP?

You should use PSoC Designer 5.4 and later version. It can be dowloaded for free from the below link -
www.cypress.com/go/psocdesigner

Can you please confirm if PSoC Designer 5.4 IDE is compatible with Windows 8 or not?

According to supplier, PSoC Designer 5.4 IDE supports windows 8. Along with windows 8 it is also compatible with earlier versions of windows like Windows XP (SP2 or higher), Vista or Windows 7.

How to update the firmware of onboard PSoC 3 programmer on CY8CKIT-PSOC-024LP?

Do I have to purchase a C compiler for PSoC Designer?

Is there a way to measure current consumption on PSoC in CY8CKIT-PSOC-024LP?

Tags: cy8c24x93, primary_platforms, mcu, development_platforms_kits, cypress, psoc

PSoC 1 Low Power Kit based on CY8C24x93 MCU

e14-publisher — Mon, 18 Oct 2021 20:16:31 GMT

Revision 1 posted to Documents by e14-publisher on 10/18/2021 8:16:31 PM

PSoC 1 Low Power Kit based on CY8C24x93 MCU

Manufactured By:Cypress

Part Number:CY8CKIT-PSOC-024LP

Buy Now

Features

Arduino Shield Design
CY8C24x93 device
Thermistor & Humidity Analog Sensors
Potentiometer
4 Segment LCD
IR LED for Remote Control
Powered through USB
Data logging through USB
Onboard Programmer
OCD connections for CY3215 ICE-Cube Programming and Debugging
Accessible open GPIO pins
Push Button (Reset and User Button)
CY8C24x93 device Highlights
- 8-bit Proprietary M8C CPU, Max operating frequency 24MHz
- 8 kB to 32 kB Flash, 2 kB SRAM
- 1.71 to 5.5V Operation
- 1.1 mA Active Mode, 1.07 µA Standby Mode, 100nA Deep Sleep Mode
- Full Speed USB 2.0, 10-bit ADC, 3x 16-bit Timers, 2x Comparators, 8-bit iDAC
Multiple host interfaces enabled through compatible header interfaces:
- Arduino UNO (through I2C, Thermistor and Humidity sensor pins are shared)
- PSoC 4 Pioneer kit (through I2C, Thermistor and Humidity sensor pins are shared)
- PMODs (Type 1, Type 2, Type 5 and Type 6)
- Beaglebone (through GPIOs, I2C and USB)
- Raspberry Pi (through GPIOs and I2C)

The PSoC1 Low Power Kit can also be used as an accessory board through an Arduino footprint compatible header that brings out:

Power & Ground
I2C
SPI
UART
Multiple GPIO

Ships With

PSoC 1 Low Power Kit board
Documentation – Quick Start Guide

Required Tools

Accessory Tools

Documents

Data Sheet

Datasheet for CY8C24X93 Low Power PSoC1 (pdf)

Reference Manual

PSoC® CY8C24x93 Family Technical Reference Manual (TRM) (pdf)

User Manual/Guide

User Manual for PSoC1-LPK Development Kit Rev1.0 (pdf)

Downloads

Sample Code

Sample Code for CY8CKIT-PSOC-024LP PSoC 1 Low Power Kit (zip)

Schematics/Layout Files

Schematic for PSoC1-LPK Development Kit Rev.04 (zip)

Simulation Model/CAD Models

IBIS Models for PSoC 1 CY8C24x93 Family (zip)

FAQs

Which IDE should I use to start developing applications with CY8CKIT-PSOC-024LP?

You should use PSoC Designer 5.4 and later version. It can be dowloaded for free from the below link -
www.cypress.com/go/psocdesigner

Can you please confirm if PSoC Designer 5.4 IDE is compatible with Windows 8 or not?

According to supplier, PSoC Designer 5.4 IDE supports windows 8. Along with windows 8 it is also compatible with earlier versions of windows like Windows XP (SP2 or higher), Vista or Windows 7.

How to update the firmware of onboard PSoC 3 programmer on CY8CKIT-PSOC-024LP?

Do I have to purchase a C compiler for PSoC Designer?

Is there a way to measure current consumption on PSoC in CY8CKIT-PSOC-024LP?

Tags: cy8c24x93, primary_platforms, mcu, development_platforms_kits, cypress, psoc