Evaluation Kit for MC33926, 5.0 A Throttle Control H-Bridge

e14-publisher — Fri, 05 May 2023 15:54:48 GMT

Current Revision posted to Documents by e14-publisher on 5/5/2023 3:54:48 PM

Evaluation Kit for MC33926, 5.0 A Throttle Control H-Bridge

Manufactured By:NXP

Part Number:KIT33926PNBEVBE

Buy Now

The Evaluation Kit features the MC33926, which is a monolithic H-Bridge Power IC designed primarily for automotive electronic throttle control, but is applicable to any low-voltage DC servo motor control application within the current and voltage limits stated in this specification.

The MC33926 is able to control inductive loads with currents up to 5.0 A peak. RMS current capability is subject to the degree of heat sinking provided to the device package. Internal peak-current limiting (regulation) is activated at load currents above 6.5 A ± 1.5 A. Output loads can be pulse width modulated (PWM’ed) at frequencies up to 20 kHz. A load current feedback feature provides a proportional (0.24% of the load current) current output suitable for monitoring by a microcontroller’s A/D input.

A Status Flag output reports under voltage, over current, and over temperature fault conditions. Two independent inputs provide polarity control of two half-bridge totem-pole outputs. Two independent disable inputs are provided to force the H-Bridge outputs to tri-state (high impedance off-state). An invert input changes the IN1 and IN2 inputs to LOW=true logic.

Applications: Electronic Throttle Control (ETC), Exhaust Gas Recirculation (EGR), Turbo Flap Control, Industrial and Medical pumps and motor control

Features

8.0 V to 28 V Continuous Operation (Transient Operation from 5.0 V to 40 V)
225 m? maximum RDS(ON) @ 150°C (each H-Bridge MOSFET)
3.0 V and 5.0 V TTL / CMOS Logic Compatible Inputs
Overcurrent Limiting (Regulation) via Internal Constant-Off-Time PWM
Output Short Circuit Protection (Short to VPWR or Ground)
Temperature-Dependant Current-Limit Threshold Reduction
All Inputs have an Internal Source/Sink to Define the Default (Floating Input) States
Sleep Mode with Current Draw < 50 µA (with Inputs Floating or Set to Match Default Logic States)

Ships With

Assembled and tested evaluation board/module in anti-static bag.
Ribbon cable assembly with 16-pin connector
CD-ROM containing:
- Supporting documentation for featured device (including data sheet and user's guide)
  - Schematic of evaluation board
  - PCB artwork
  - Bill of material for evaluation board
  - Instruction sheet for evaluation board
- SPIGen 5.0.1 software
Warranty card

Required Tools

Accessory Tools

Documents

Application Note

MPC563xM-based Cost Effective Chipset (pdf)

Data Sheet

MC33926, 5.0 A Throttle Control H-Bridge - Data Sheet (pdf)

MC33926FS, Throttle Control H-Bridge Power IC (pdf)

User Manual/Guide

KIT33926EKEVBE, Evaluation Board - User Guide (pdf)

Downloads

Configuration Tool

KIT33926 SPIGEN Configuration File

Schematics/Layout Files

Gerber files for the KIT33926PNBEVBE Evaluation Board (zip)

Tags: MC33926, dc_motor_control, dc motor control, motor_control, analog_demo_boards, nxp, Throttle Control H-Bridge

Evaluation Kit for MC33926, 5.0 A Throttle Control H-Bridge

e14-publisher — Thu, 16 Dec 2021 23:27:26 GMT

Revision 3 posted to Documents by e14-publisher on 12/16/2021 11:27:26 PM

Evaluation Kit for MC33926, 5.0 A Throttle Control H-Bridge

Manufactured By:NXP

Part Number:KIT33926PNBEVBE

Buy Now

Applications: Electronic Throttle Control (ETC), Exhaust Gas Recirculation (EGR), Turbo Flap Control, Industrial and Medical pumps and motor control

Features

8.0 V to 28 V Continuous Operation (Transient Operation from 5.0 V to 40 V)
225 m? maximum RDS(ON) @ 150°C (each H-Bridge MOSFET)
3.0 V and 5.0 V TTL / CMOS Logic Compatible Inputs
Overcurrent Limiting (Regulation) via Internal Constant-Off-Time PWM
Output Short Circuit Protection (Short to VPWR or Ground)
Temperature-Dependant Current-Limit Threshold Reduction
All Inputs have an Internal Source/Sink to Define the Default (Floating Input) States
Sleep Mode with Current Draw < 50 µA (with Inputs Floating or Set to Match Default Logic States)

Ships With

Assembled and tested evaluation board/module in anti-static bag.
Ribbon cable assembly with 16-pin connector
CD-ROM containing:
- Supporting documentation for featured device (including data sheet and user's guide)
  - Schematic of evaluation board
  - PCB artwork
  - Bill of material for evaluation board
  - Instruction sheet for evaluation board
- SPIGen 5.0.1 software
Warranty card

Required Tools

Accessory Tools

Documents

Application Note

MPC563xM-based Cost Effective Chipset (pdf)

Data Sheet

MC33926, 5.0 A Throttle Control H-Bridge - Data Sheet (pdf)

MC33926FS, Throttle Control H-Bridge Power IC (pdf)

User Manual/Guide

KIT33926EKEVBE, Evaluation Board - User Guide (pdf)

Downloads

Configuration Tool

KIT33926 SPIGEN Configuration File

Schematics/Layout Files

Gerber files for the KIT33926PNBEVBE Evaluation Board (zip)

Tags: MC33926, dc_motor_control, dc motor control, motor_control, analog_demo_boards, nxp, Throttle Control H-Bridge

Evaluation Kit for MC33926, 5.0 A Throttle Control H-Bridge

e14-publisher — Thu, 16 Dec 2021 03:14:22 GMT

Revision 2 posted to Documents by e14-publisher on 12/16/2021 3:14:22 AM

Evaluation Kit for MC33926, 5.0 A Throttle Control H-Bridge

Manufactured By:NXP

Part Number:KIT33926PNBEVBE

Buy Now

Applications: Electronic Throttle Control (ETC), Exhaust Gas Recirculation (EGR), Turbo Flap Control, Industrial and Medical pumps and motor control

Features

8.0 V to 28 V Continuous Operation (Transient Operation from 5.0 V to 40 V)
225 m? maximum RDS(ON) @ 150°C (each H-Bridge MOSFET)
3.0 V and 5.0 V TTL / CMOS Logic Compatible Inputs
Overcurrent Limiting (Regulation) via Internal Constant-Off-Time PWM
Output Short Circuit Protection (Short to VPWR or Ground)
Temperature-Dependant Current-Limit Threshold Reduction
All Inputs have an Internal Source/Sink to Define the Default (Floating Input) States
Sleep Mode with Current Draw < 50 µA (with Inputs Floating or Set to Match Default Logic States)

Ships With

Assembled and tested evaluation board/module in anti-static bag.
Ribbon cable assembly with 16-pin connector
CD-ROM containing:
- Supporting documentation for featured device (including data sheet and user's guide)
  - Schematic of evaluation board
  - PCB artwork
  - Bill of material for evaluation board
  - Instruction sheet for evaluation board
- SPIGen 5.0.1 software
Warranty card

Required Tools

Accessory Tools

Documents

Application Note

MPC563xM-based Cost Effective Chipset (pdf)

Data Sheet

MC33926, 5.0 A Throttle Control H-Bridge - Data Sheet (pdf)

MC33926FS, Throttle Control H-Bridge Power IC (pdf)

User Manual/Guide

KIT33926EKEVBE, Evaluation Board - User Guide (pdf)

Downloads

Configuration Tool

KIT33926 SPIGEN Configuration File

Schematics/Layout Files

Gerber files for the KIT33926PNBEVBE Evaluation Board (zip)

Tags: MC33926, dc_motor_control, dc motor control, motor_control, analog_demo_boards, nxp, Throttle Control H-Bridge

Evaluation Kit for MC33926, 5.0 A Throttle Control H-Bridge

e14-publisher — Mon, 18 Oct 2021 20:19:34 GMT

Revision 1 posted to Documents by e14-publisher on 10/18/2021 8:19:34 PM

Evaluation Kit for MC33926, 5.0 A Throttle Control H-Bridge

Manufactured By:NXP

Part Number:KIT33926PNBEVBE

Buy Now

Applications: Electronic Throttle Control (ETC), Exhaust Gas Recirculation (EGR), Turbo Flap Control, Industrial and Medical pumps and motor control

Features

8.0 V to 28 V Continuous Operation (Transient Operation from 5.0 V to 40 V)
225 m? maximum RDS(ON) @ 150°C (each H-Bridge MOSFET)
3.0 V and 5.0 V TTL / CMOS Logic Compatible Inputs
Overcurrent Limiting (Regulation) via Internal Constant-Off-Time PWM
Output Short Circuit Protection (Short to VPWR or Ground)
Temperature-Dependant Current-Limit Threshold Reduction
All Inputs have an Internal Source/Sink to Define the Default (Floating Input) States
Sleep Mode with Current Draw < 50 µA (with Inputs Floating or Set to Match Default Logic States)

Ships With

Assembled and tested evaluation board/module in anti-static bag.
Ribbon cable assembly with 16-pin connector
CD-ROM containing:
- Supporting documentation for featured device (including data sheet and user's guide)
  - Schematic of evaluation board
  - PCB artwork
  - Bill of material for evaluation board
  - Instruction sheet for evaluation board
- SPIGen 5.0.1 software
Warranty card