Kinetis KL25Z Freedom Platform with Wifi Shield Kit

e14-publisher — Fri, 05 May 2023 15:55:37 GMT

Current Revision posted to Documents by e14-publisher on 5/5/2023 3:55:37 PM

Kinetis KL25Z Freedom Platform with Wifi Shield Kit

Manufactured By:NXP

Part Number:FRDMKL25Z-WIFI-BUNDLE

Buy Now

The FRDM-KL25Z Freedom development platform is a set of software and hardware tools for evaluation and development. This platform is a small, low-power, cost-efficient evaluation and development system for quick application prototyping and demonstration based on the Kinetis L series, the industry's first microcontrollers built on the ARM Cortex-M0 processor.

The development platform combines an industry-standard form factor with a rich set of third-party expansion board options. Using this platform to speed development, applications such as small appliances, gaming accessories, portable medical systems, audio systems, smart meters, lighting and power control, can now leverage 32-bit capabilities and the scalability needed to expand future product lines, all at 8- and 16-bit price and power consumption levels.

The Arduino WiFi Shield connects your Arduino to the internet wirelessly. Connect it to your wireless network by following a few simple instructions to start controlling your world through the internet. As always with Arduino, every element of the platform – hardware, software and documentation – is freely available and open-source. This means you can learn exactly how it's made and use its design as the starting point for your own circuits.

The WiFi Shield communicates with Arduino using the SPI bus (through the ICSP header), so is compatible with any of the boards that have this type of bus. This version of WiFi shield have an integrated antenna on the PCB, what you have to do is just connect the shield to the Arduino.

Features

Features of Kinetis KL25Z Freedom Platform:

KL25Z128VLK4-Cortex-M0 MCU with:
- 128kB flash, 16kB SRAM
- Up to 48MHz operation
- USB full-speed controller
OpenSDA-sophisticated USB debug interface
Tri-color LED
Capacitive touch “slider”
NXP MMA8451Q accelerometer
Flexible power supply options
- Power from either on-board USB connector
- Coin cell battery holder (optional population option)
- 5V to 9Vvin from optional IO header
- 5V provided to optional IO header
- 3.3V to or from optional IO header
Reset button
Expansion IO form factor accepts peripherals designed for Arduino™-compatible hardware

Features of Arduino Wifi Shield:

Requires an Arduino board (not included)
Operating voltage 5V (supplied from the Arduino Board)
Connection via: 802.11b/g networks
Encryption types: WEP and WPA2 Personal
Connection with Arduino on SPI port
on-board micro SD slot
ICSP headers
FTDI connection for serial debugging of WiFi shield
Mini-USB for updating WiFi shield firmware

Ships With

One Samtec Socket, 2.54mm, 1 × 6 Pos (SSW-106-01-T-S)
Two Samtec Socket, 2.54mm, 1 × 8 Pos (SSW-108-01-T-S)
One Samtec Socket, 2.54mm, 1 × 10 Pos (SSW-110-01-T-S)
Three Samtec Header, 2.54mm, THT VERT, 2 Pos (TSW-102-07-T-S)
One Multicomp Mini USB cable (SPC20060)
One Freedom Platform (FRDM-KL25Z)
One Arduino Wifi Shield

Required Tools

Accessory Tools

Documents

Application Note

AN4637 - Integrating Touch Sensing Software on Kinetis L using GPIO method (pdf)

AN4631 - Using Asynchronous DMA features of Kinetis L Series (pdf)

Data Sheet

KL25 Sub-Family Datasheet (pdf)

Product Brief/Fact sheet

Freedom Development Platform - Fact Sheet (pdf)

Kinetis KL2x MCU Family - Fact Sheet (pdf)

User Manual/Guide

User Manual for FRDM-KL25Z (zip)

Evaluation Basic Kit Kinetis KL25Z Freedom Platform and Arduino Wifi Shield (pdf)

User Guide for OpenSDA (pdf)

Downloads

Applications Library

WiFi shield firmware and library at github (zip)

Design Package

Arduino Wifi Shield reference Design (zip)

FRDM-KL25Z - Printed Circuit Board bill of materials and design files (zip)

Interfacing To Other Systems

Kinetis Interface Tool (Login required) (zip)

Quickstart Package

Quick start package for FRDM-KL25Z (zip)

Schematics/Layout Files

Arduino Wifi Shield Schematic (pdf)

Schematics for FRDM-KL25Z (pdf)

Tags: kinetis, primary_platforms, mcu, nxp, development_platforms_kits, arduino, freedom platform, kl25z

Kinetis KL25Z Freedom Platform with Wifi Shield Kit

e14-publisher — Thu, 16 Dec 2021 23:28:14 GMT

Revision 3 posted to Documents by e14-publisher on 12/16/2021 11:28:14 PM

Kinetis KL25Z Freedom Platform with Wifi Shield Kit

Manufactured By:NXP

Part Number:FRDMKL25Z-WIFI-BUNDLE

Buy Now

Features

Features of Kinetis KL25Z Freedom Platform:

KL25Z128VLK4-Cortex-M0 MCU with:
- 128kB flash, 16kB SRAM
- Up to 48MHz operation
- USB full-speed controller
OpenSDA-sophisticated USB debug interface
Tri-color LED
Capacitive touch “slider”
NXP MMA8451Q accelerometer
Flexible power supply options
- Power from either on-board USB connector
- Coin cell battery holder (optional population option)
- 5V to 9Vvin from optional IO header
- 5V provided to optional IO header
- 3.3V to or from optional IO header
Reset button
Expansion IO form factor accepts peripherals designed for Arduino™-compatible hardware

Features of Arduino Wifi Shield:

Requires an Arduino board (not included)
Operating voltage 5V (supplied from the Arduino Board)
Connection via: 802.11b/g networks
Encryption types: WEP and WPA2 Personal
Connection with Arduino on SPI port
on-board micro SD slot
ICSP headers
FTDI connection for serial debugging of WiFi shield
Mini-USB for updating WiFi shield firmware

Ships With

One Samtec Socket, 2.54mm, 1 × 6 Pos (SSW-106-01-T-S)
Two Samtec Socket, 2.54mm, 1 × 8 Pos (SSW-108-01-T-S)
One Samtec Socket, 2.54mm, 1 × 10 Pos (SSW-110-01-T-S)
Three Samtec Header, 2.54mm, THT VERT, 2 Pos (TSW-102-07-T-S)
One Multicomp Mini USB cable (SPC20060)
One Freedom Platform (FRDM-KL25Z)
One Arduino Wifi Shield

Required Tools

Accessory Tools

Documents

Application Note

AN4637 - Integrating Touch Sensing Software on Kinetis L using GPIO method (pdf)

AN4631 - Using Asynchronous DMA features of Kinetis L Series (pdf)

Data Sheet

KL25 Sub-Family Datasheet (pdf)

Product Brief/Fact sheet

Freedom Development Platform - Fact Sheet (pdf)

Kinetis KL2x MCU Family - Fact Sheet (pdf)

User Manual/Guide

User Manual for FRDM-KL25Z (zip)

Evaluation Basic Kit Kinetis KL25Z Freedom Platform and Arduino Wifi Shield (pdf)

User Guide for OpenSDA (pdf)

Downloads

Applications Library

WiFi shield firmware and library at github (zip)

Design Package

Arduino Wifi Shield reference Design (zip)

FRDM-KL25Z - Printed Circuit Board bill of materials and design files (zip)

Interfacing To Other Systems

Kinetis Interface Tool (Login required) (zip)

Quickstart Package

Quick start package for FRDM-KL25Z (zip)

Schematics/Layout Files

Arduino Wifi Shield Schematic (pdf)

Schematics for FRDM-KL25Z (pdf)

Tags: kinetis, primary_platforms, mcu, nxp, development_platforms_kits, arduino, freedom platform, kl25z

Kinetis KL25Z Freedom Platform with Wifi Shield Kit

e14-publisher — Thu, 16 Dec 2021 03:15:17 GMT

Revision 2 posted to Documents by e14-publisher on 12/16/2021 3:15:17 AM

Kinetis KL25Z Freedom Platform with Wifi Shield Kit

Manufactured By:NXP

Part Number:FRDMKL25Z-WIFI-BUNDLE

Buy Now

Features

Features of Kinetis KL25Z Freedom Platform:

KL25Z128VLK4-Cortex-M0 MCU with:
- 128kB flash, 16kB SRAM
- Up to 48MHz operation
- USB full-speed controller
OpenSDA-sophisticated USB debug interface
Tri-color LED
Capacitive touch “slider”
NXP MMA8451Q accelerometer
Flexible power supply options
- Power from either on-board USB connector
- Coin cell battery holder (optional population option)
- 5V to 9Vvin from optional IO header
- 5V provided to optional IO header
- 3.3V to or from optional IO header
Reset button
Expansion IO form factor accepts peripherals designed for Arduino™-compatible hardware

Features of Arduino Wifi Shield:

Requires an Arduino board (not included)
Operating voltage 5V (supplied from the Arduino Board)
Connection via: 802.11b/g networks
Encryption types: WEP and WPA2 Personal
Connection with Arduino on SPI port
on-board micro SD slot
ICSP headers
FTDI connection for serial debugging of WiFi shield
Mini-USB for updating WiFi shield firmware

Ships With

One Samtec Socket, 2.54mm, 1 × 6 Pos (SSW-106-01-T-S)
Two Samtec Socket, 2.54mm, 1 × 8 Pos (SSW-108-01-T-S)
One Samtec Socket, 2.54mm, 1 × 10 Pos (SSW-110-01-T-S)
Three Samtec Header, 2.54mm, THT VERT, 2 Pos (TSW-102-07-T-S)
One Multicomp Mini USB cable (SPC20060)
One Freedom Platform (FRDM-KL25Z)
One Arduino Wifi Shield

Required Tools

Accessory Tools

Documents

Application Note

AN4637 - Integrating Touch Sensing Software on Kinetis L using GPIO method (pdf)

AN4631 - Using Asynchronous DMA features of Kinetis L Series (pdf)

Data Sheet

KL25 Sub-Family Datasheet (pdf)

Product Brief/Fact sheet

Freedom Development Platform - Fact Sheet (pdf)

Kinetis KL2x MCU Family - Fact Sheet (pdf)

User Manual/Guide

User Manual for FRDM-KL25Z (zip)

Evaluation Basic Kit Kinetis KL25Z Freedom Platform and Arduino Wifi Shield (pdf)

User Guide for OpenSDA (pdf)

Downloads

Applications Library

WiFi shield firmware and library at github (zip)

Design Package

Arduino Wifi Shield reference Design (zip)

FRDM-KL25Z - Printed Circuit Board bill of materials and design files (zip)

Interfacing To Other Systems

Kinetis Interface Tool (Login required) (zip)

Quickstart Package

Quick start package for FRDM-KL25Z (zip)

Schematics/Layout Files

Arduino Wifi Shield Schematic (pdf)

Schematics for FRDM-KL25Z (pdf)

Tags: kinetis, primary_platforms, mcu, nxp, development_platforms_kits, arduino, freedom platform, kl25z

Kinetis KL25Z Freedom Platform with Wifi Shield Kit

e14-publisher — Mon, 18 Oct 2021 20:20:11 GMT

Revision 1 posted to Documents by e14-publisher on 10/18/2021 8:20:11 PM

Kinetis KL25Z Freedom Platform with Wifi Shield Kit

Manufactured By:NXP

Part Number:FRDMKL25Z-WIFI-BUNDLE

Buy Now

Features

Features of Kinetis KL25Z Freedom Platform:

KL25Z128VLK4-Cortex-M0 MCU with:
- 128kB flash, 16kB SRAM
- Up to 48MHz operation
- USB full-speed controller
OpenSDA-sophisticated USB debug interface
Tri-color LED
Capacitive touch “slider”
NXP MMA8451Q accelerometer
Flexible power supply options
- Power from either on-board USB connector
- Coin cell battery holder (optional population option)
- 5V to 9Vvin from optional IO header
- 5V provided to optional IO header
- 3.3V to or from optional IO header
Reset button
Expansion IO form factor accepts peripherals designed for Arduino™-compatible hardware