NXP Freedom Development Platform for Kinetis KW2x MCUs

e14-publisher — Fri, 05 May 2023 15:57:34 GMT

Current Revision posted to Documents by e14-publisher on 5/5/2023 3:57:34 PM

NXP Freedom Development Platform for Kinetis KW2x MCUs

Manufactured By:NXP

Part Number:FRDM-KW24D512

Buy Now

The FRDM-KW24D512 is a development platform based on the Our MKW24D512 Kinetis W Series microcontroller and is enabled by software support for Thread, ZigBee Pro, 802.15.4 MAC, SMAC and Kinetis Software Development Kit (SDK). The FRDM-KW24D512 kit contains two boards, enabling point-to-point out of the box connectivity.

Kinetis MKW24D512 MCU is a low-power, compact integrated device consisting of a high-performance 2.4 GHz IEEE 802.15.4 compliant radio transceiver and a powerful ARM® Cortex®-M4 core system with connectivity and precision mixed-signal analog peripherals.

FRDM-KW24D512 evaluation boards are designed to work either in standalone mode or as part of the Freedom development platforms for quick application prototyping. They are fully supported by a comprehensive enablement environment.

Applications: Smart Energy, Building Control and Home Automation, Medical / Personal Health Care, Industrial Control

Features

Supports MKW24D512 Kinetis microcontroller (up to 50 MHz Cortex-M4 MCU, 512 KB Flash)
Full IEEE 802.15.4 compliant wireless node
Software support: Thread, ZigBee Pro, 802.15.4 MAC and SMAC, Kinetis Software Development Kit (SDK)
Reference design area with small footprint, low-cost RF node:
- RF circuitry includes a Balun to convert the differential input/output pin of the MKW24D512 transciever to single-ended for on-board signal routing
- Low off-chip component count
- Programmable output power from –35 dBm to 8 dBm at the SMA connector, no trap
- Receiver sensitivity: –102 dBm, typical
Integrated PCB inverted F-type antenna and SMA RF port
Selectable power sources
32 MHz reference oscillator
32 kHz clock oscillator
2.4 GHz frequency operation (ISM Band)
External serial flast for over-the-air programming (OTAP) support
Multiple push buttons and LEDs
OpenSDA debug interface
Combo sensor, 6-axis sensor with integrated linear accelerometer and magnetometer

Ships With

2 FRDM-KW24D512 Freedom Development Boards
Quick Reference Card
2 USB Cables

Required Tools

Accessory Tools

Documents

Application Note

Wireless Coexistence in the 2.4 GHz Band (pdf)

Power Management for Kinetis and ColdFire MCUs (pdf)

AN4857 - Low-Power Modes on MKW2x Family (pdf)

Power supply options for Tower® development plaftorm (REV 0.1) (pdf)

Hardware Design Considerations for MKW2x IEEE 802.15.4 Devices (REV 0.0) (pdf)

NXPÂ® 802.15.4 MAC Security Setup (REV 0) (pdf)

I2C non-blocking communication (REV 0) (pdf)

USB Mass Storage Device (MSD) Host Bootloader (REV 1) (pdf)

USB device firmware update (DFU) for Kinetis MCUs (REV 1) (pdf)

Using Kinetis DMA and GPIO to emulate timer functionality (REV 0) (pdf)

Using CMSIS-DSP Algorithms with MQX and Kinetis® MCUs (REV 0) (pdf)

Low-Power management with MQX RTOS on KinetisÂ® MCUs (REV 0) (pdf)

Prototyping with Tower® System MCU development board (REV 0) (pdf)

Using WinUSB with MCU integrating USB device controller (REV 0) (pdf)

USB Mass Storage Device (MSD) Bootloader (REV 0) (pdf)

Data Sheet

MKW2x Data Sheet: Supports MKW24D512V, MKW22D512V, MKW21D512V, and MKW21D256V Products (pdf)

Product Brief/Fact sheet

Kinetis SDK v1 - Fact Sheet (pdf)

NXP Freedom Development Platform Overview - Fact Sheet (pdf)

Quick Start Guide

FRDM-KW24D512 Getting Started Guide

Reference Manual

BeeStack™ Software Reference Manual for ZigBee 2007 (pdf)

BeeStack BlackBox ZTC Reference Manual (pdf)

User Manual/Guide

FRDM-KW24D512 NXP Freedom Development Board (pdf)

Kinetis ZigBee Stack Demo Applications User's Guide (pdf)

Downloads

Bill of Materials

FRDM-KW24D512 BOM file (zip)

Board Support Package

FRDM-KW24D512 Board Support Package (zip)

Design Package

Kinetis BeeStack ZigBee Protocol Stack (exe)

FRDM-KW24D512 Design Files (zip)

Test Tool for Connectivity Products (exe)

Free Version

Kinetis KW2xD IEEE® 802.15.4 Software (exe)

Kinetis KW2xD SMAC Software (exe)

Schematics/Layout Files

FRDM-KW24D512 Schematic file (pdf)

Tags: kinetis, primary_platforms, 802.15.4 MAC, SMAC, mcu, MKW24D512, nxp, development_platforms_kits, ZigBee Pro, freedom, KW2x

NXP Freedom Development Platform for Kinetis KW2x MCUs

e14-publisher — Thu, 16 Dec 2021 23:29:27 GMT

Revision 3 posted to Documents by e14-publisher on 12/16/2021 11:29:27 PM

NXP Freedom Development Platform for Kinetis KW2x MCUs

Manufactured By:NXP

Part Number:FRDM-KW24D512

Buy Now

Applications: Smart Energy, Building Control and Home Automation, Medical / Personal Health Care, Industrial Control

Features

Supports MKW24D512 Kinetis microcontroller (up to 50 MHz Cortex-M4 MCU, 512 KB Flash)
Full IEEE 802.15.4 compliant wireless node
Software support: Thread, ZigBee Pro, 802.15.4 MAC and SMAC, Kinetis Software Development Kit (SDK)
Reference design area with small footprint, low-cost RF node:
- RF circuitry includes a Balun to convert the differential input/output pin of the MKW24D512 transciever to single-ended for on-board signal routing
- Low off-chip component count
- Programmable output power from –35 dBm to 8 dBm at the SMA connector, no trap
- Receiver sensitivity: –102 dBm, typical
Integrated PCB inverted F-type antenna and SMA RF port
Selectable power sources
32 MHz reference oscillator
32 kHz clock oscillator
2.4 GHz frequency operation (ISM Band)
External serial flast for over-the-air programming (OTAP) support
Multiple push buttons and LEDs
OpenSDA debug interface
Combo sensor, 6-axis sensor with integrated linear accelerometer and magnetometer

Ships With

2 FRDM-KW24D512 Freedom Development Boards
Quick Reference Card
2 USB Cables

Required Tools

Accessory Tools

Documents

Application Note

Wireless Coexistence in the 2.4 GHz Band (pdf)

Power Management for Kinetis and ColdFire MCUs (pdf)

AN4857 - Low-Power Modes on MKW2x Family (pdf)

Power supply options for Tower® development plaftorm (REV 0.1) (pdf)

Hardware Design Considerations for MKW2x IEEE 802.15.4 Devices (REV 0.0) (pdf)

NXPÂ® 802.15.4 MAC Security Setup (REV 0) (pdf)

I2C non-blocking communication (REV 0) (pdf)

USB Mass Storage Device (MSD) Host Bootloader (REV 1) (pdf)

USB device firmware update (DFU) for Kinetis MCUs (REV 1) (pdf)

Using Kinetis DMA and GPIO to emulate timer functionality (REV 0) (pdf)

Using CMSIS-DSP Algorithms with MQX and Kinetis® MCUs (REV 0) (pdf)

Low-Power management with MQX RTOS on KinetisÂ® MCUs (REV 0) (pdf)

Prototyping with Tower® System MCU development board (REV 0) (pdf)

Using WinUSB with MCU integrating USB device controller (REV 0) (pdf)

USB Mass Storage Device (MSD) Bootloader (REV 0) (pdf)

Data Sheet

MKW2x Data Sheet: Supports MKW24D512V, MKW22D512V, MKW21D512V, and MKW21D256V Products (pdf)

Product Brief/Fact sheet

Kinetis SDK v1 - Fact Sheet (pdf)

NXP Freedom Development Platform Overview - Fact Sheet (pdf)

Quick Start Guide

FRDM-KW24D512 Getting Started Guide

Reference Manual

BeeStack™ Software Reference Manual for ZigBee 2007 (pdf)

BeeStack BlackBox ZTC Reference Manual (pdf)

User Manual/Guide

FRDM-KW24D512 NXP Freedom Development Board (pdf)

Kinetis ZigBee Stack Demo Applications User's Guide (pdf)

Downloads

Bill of Materials

FRDM-KW24D512 BOM file (zip)

Board Support Package

FRDM-KW24D512 Board Support Package (zip)

Design Package

Kinetis BeeStack ZigBee Protocol Stack (exe)

FRDM-KW24D512 Design Files (zip)

Test Tool for Connectivity Products (exe)

Free Version

Kinetis KW2xD IEEE® 802.15.4 Software (exe)

Kinetis KW2xD SMAC Software (exe)

Schematics/Layout Files

FRDM-KW24D512 Schematic file (pdf)

Tags: kinetis, primary_platforms, 802.15.4 MAC, SMAC, mcu, MKW24D512, nxp, development_platforms_kits, ZigBee Pro, freedom, KW2x

NXP Freedom Development Platform for Kinetis KW2x MCUs

e14-publisher — Thu, 16 Dec 2021 03:16:46 GMT

Revision 2 posted to Documents by e14-publisher on 12/16/2021 3:16:46 AM

NXP Freedom Development Platform for Kinetis KW2x MCUs

Manufactured By:NXP

Part Number:FRDM-KW24D512

Buy Now

Applications: Smart Energy, Building Control and Home Automation, Medical / Personal Health Care, Industrial Control

Features

Supports MKW24D512 Kinetis microcontroller (up to 50 MHz Cortex-M4 MCU, 512 KB Flash)
Full IEEE 802.15.4 compliant wireless node
Software support: Thread, ZigBee Pro, 802.15.4 MAC and SMAC, Kinetis Software Development Kit (SDK)
Reference design area with small footprint, low-cost RF node:
- RF circuitry includes a Balun to convert the differential input/output pin of the MKW24D512 transciever to single-ended for on-board signal routing
- Low off-chip component count
- Programmable output power from –35 dBm to 8 dBm at the SMA connector, no trap
- Receiver sensitivity: –102 dBm, typical
Integrated PCB inverted F-type antenna and SMA RF port
Selectable power sources
32 MHz reference oscillator
32 kHz clock oscillator
2.4 GHz frequency operation (ISM Band)
External serial flast for over-the-air programming (OTAP) support
Multiple push buttons and LEDs
OpenSDA debug interface
Combo sensor, 6-axis sensor with integrated linear accelerometer and magnetometer

Ships With

2 FRDM-KW24D512 Freedom Development Boards
Quick Reference Card
2 USB Cables

Required Tools

Accessory Tools

Documents

Application Note

Wireless Coexistence in the 2.4 GHz Band (pdf)

Power Management for Kinetis and ColdFire MCUs (pdf)

AN4857 - Low-Power Modes on MKW2x Family (pdf)

Power supply options for Tower® development plaftorm (REV 0.1) (pdf)

Hardware Design Considerations for MKW2x IEEE 802.15.4 Devices (REV 0.0) (pdf)

NXPÂ® 802.15.4 MAC Security Setup (REV 0) (pdf)

I2C non-blocking communication (REV 0) (pdf)

USB Mass Storage Device (MSD) Host Bootloader (REV 1) (pdf)

USB device firmware update (DFU) for Kinetis MCUs (REV 1) (pdf)

Using Kinetis DMA and GPIO to emulate timer functionality (REV 0) (pdf)

Using CMSIS-DSP Algorithms with MQX and Kinetis® MCUs (REV 0) (pdf)

Low-Power management with MQX RTOS on KinetisÂ® MCUs (REV 0) (pdf)

Prototyping with Tower® System MCU development board (REV 0) (pdf)

Using WinUSB with MCU integrating USB device controller (REV 0) (pdf)

USB Mass Storage Device (MSD) Bootloader (REV 0) (pdf)

Data Sheet

MKW2x Data Sheet: Supports MKW24D512V, MKW22D512V, MKW21D512V, and MKW21D256V Products (pdf)

Product Brief/Fact sheet

Kinetis SDK v1 - Fact Sheet (pdf)

NXP Freedom Development Platform Overview - Fact Sheet (pdf)

Quick Start Guide

FRDM-KW24D512 Getting Started Guide

Reference Manual

BeeStack™ Software Reference Manual for ZigBee 2007 (pdf)

BeeStack BlackBox ZTC Reference Manual (pdf)

User Manual/Guide

FRDM-KW24D512 NXP Freedom Development Board (pdf)

Kinetis ZigBee Stack Demo Applications User's Guide (pdf)

Downloads

Bill of Materials

FRDM-KW24D512 BOM file (zip)

Board Support Package

FRDM-KW24D512 Board Support Package (zip)

Design Package

Kinetis BeeStack ZigBee Protocol Stack (exe)

FRDM-KW24D512 Design Files (zip)

Test Tool for Connectivity Products (exe)

Free Version

Kinetis KW2xD IEEE® 802.15.4 Software (exe)

Kinetis KW2xD SMAC Software (exe)

Schematics/Layout Files

FRDM-KW24D512 Schematic file (pdf)

Tags: kinetis, primary_platforms, 802.15.4 MAC, SMAC, mcu, MKW24D512, nxp, development_platforms_kits, ZigBee Pro, freedom, KW2x

NXP Freedom Development Platform for Kinetis KW2x MCUs

e14-publisher — Mon, 18 Oct 2021 20:21:08 GMT

Revision 1 posted to Documents by e14-publisher on 10/18/2021 8:21:08 PM

NXP Freedom Development Platform for Kinetis KW2x MCUs

Manufactured By:NXP

Part Number:FRDM-KW24D512

Buy Now

Applications: Smart Energy, Building Control and Home Automation, Medical / Personal Health Care, Industrial Control

Features

Supports MKW24D512 Kinetis microcontroller (up to 50 MHz Cortex-M4 MCU, 512 KB Flash)
Full IEEE 802.15.4 compliant wireless node
Software support: Thread, ZigBee Pro, 802.15.4 MAC and SMAC, Kinetis Software Development Kit (SDK)
Reference design area with small footprint, low-cost RF node:
- RF circuitry includes a Balun to convert the differential input/output pin of the MKW24D512 transciever to single-ended for on-board signal routing
- Low off-chip component count
- Programmable output power from –35 dBm to 8 dBm at the SMA connector, no trap
- Receiver sensitivity: –102 dBm, typical
Integrated PCB inverted F-type antenna and SMA RF port
Selectable power sources
32 MHz reference oscillator
32 kHz clock oscillator
2.4 GHz frequency operation (ISM Band)
External serial flast for over-the-air programming (OTAP) support
Multiple push buttons and LEDs
OpenSDA debug interface
Combo sensor, 6-axis sensor with integrated linear accelerometer and magnetometer