Discovery kit with STM32F429ZI Microcontroller Unit

e14-publisher — Fri, 05 May 2023 16:00:01 GMT

Current Revision posted to Documents by e14-publisher on 5/5/2023 4:00:01 PM

Discovery kit with STM32F429ZI Microcontroller Unit

Manufactured By:ST Microelectronics

Part Number:STM32F429I-DISC1

Buy Now

The STM32F429 Discovery kit (32F429IDISCOVERY) allows users to easily develop applications with the STM32F429 high-performance MCUs with ARM^®Cortex^®-M4 core.

It includes an ST-LINK/V2 or ST-LINK/V2-B embedded debug tool, a 2.4" QVGA TFT LCD, an external 64-Mbit SDRAM, an ST MEMS gyroscope, a USB OTG micro-AB connector, LEDs and push-buttons.

The STM32F429ZIT6U device is based on the high-performance ARM® Cortex™-M4 32-bit RISC core operating at a frequency of up to 180 MHz The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all ARM single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.

Features

STM32F429ZIT6 microcontroller featuring 2 Mbytes of Flash memory, 256 Kbytes of RAM in an LQFP144 package
On-board ST-LINK/V2 on STM32F429I-DISCO or ST-LINK/V2-B on STM32F429I-DISC1
mbed^™-enabled (mbed.org) with ST-LINK/V2-B only
USB functions:
- debug port
- virtual COM port with ST-LINK/V2-B only
- mass storage with ST-LINK/2-B only
Board power supply: through the USB bus or from an external 3 V or 5 V supply voltage
2.4" QVGA TFT LCD
64-Mbit SDRAM
L3GD20, ST MEMS motion sensor 3-axis digital output gyroscope
Six LEDs:
- LD1 (red/green) for USB communication
- LD2 (red) for 3.3 V power-on
- Two user LEDs: LD3 (green), LD4 (red)
- Two USB OTG LEDs: LD5 (green) VBUS and LD6 (red) OC (over-current)
Two push-buttons (user and reset)
USB OTG with micro-AB connector
Extension header for LQFP144 I/Os for a quick connection to the prototyping board and an easy probing
Comprehensive free software including a variety of examples, part of STM32CubeF4 package or STSW-STM32138 for legacy standard libraries usage

Ships With

Board

Required Tools

Accessory Tools

Documents

Application Note

AN3990: Upgrading STM32F4DISCOVERY board firmware using a USB key (pdf)

License Agreement

Evaluation products license agreement (pdf)

Product Brief/Fact sheet

DB2042: Discovery kit with STM32F429ZI MCU (pdf)

STM32 for makers Releasing your creativity (pdf)

User Manual/Guide

UM1662: Getting started with the STM32F429 Discovery kit (pdf)

UM1670: Discovery kit for STM32F429/439 lines (pdf)

UM1680: Getting started with STM32F429 Discovery software development tools (pdf)

Downloads

Bill of Materials

STM32F429I-DISCO BOM (zip)

Schematics/Layout Files

STM32F429I-DISCO gerber files (zip)

STM32F429I-DISCO schematics (zip)

Tags: cortex-m4, STM32F429ZI, primary_platforms, stm, mcu, development_platforms_kits, arm

Discovery kit with STM32F429ZI Microcontroller Unit

e14-publisher — Thu, 16 Dec 2021 23:31:17 GMT

Revision 3 posted to Documents by e14-publisher on 12/16/2021 11:31:17 PM

Discovery kit with STM32F429ZI Microcontroller Unit

Manufactured By:ST Microelectronics

Part Number:STM32F429I-DISC1

Buy Now

The STM32F429 Discovery kit (32F429IDISCOVERY) allows users to easily develop applications with the STM32F429 high-performance MCUs with ARM^®Cortex^®-M4 core.

It includes an ST-LINK/V2 or ST-LINK/V2-B embedded debug tool, a 2.4" QVGA TFT LCD, an external 64-Mbit SDRAM, an ST MEMS gyroscope, a USB OTG micro-AB connector, LEDs and push-buttons.

Features

STM32F429ZIT6 microcontroller featuring 2 Mbytes of Flash memory, 256 Kbytes of RAM in an LQFP144 package
On-board ST-LINK/V2 on STM32F429I-DISCO or ST-LINK/V2-B on STM32F429I-DISC1
mbed^™-enabled (mbed.org) with ST-LINK/V2-B only
USB functions:
- debug port
- virtual COM port with ST-LINK/V2-B only
- mass storage with ST-LINK/2-B only
Board power supply: through the USB bus or from an external 3 V or 5 V supply voltage
2.4" QVGA TFT LCD
64-Mbit SDRAM
L3GD20, ST MEMS motion sensor 3-axis digital output gyroscope
Six LEDs:
- LD1 (red/green) for USB communication
- LD2 (red) for 3.3 V power-on
- Two user LEDs: LD3 (green), LD4 (red)
- Two USB OTG LEDs: LD5 (green) VBUS and LD6 (red) OC (over-current)
Two push-buttons (user and reset)
USB OTG with micro-AB connector
Extension header for LQFP144 I/Os for a quick connection to the prototyping board and an easy probing
Comprehensive free software including a variety of examples, part of STM32CubeF4 package or STSW-STM32138 for legacy standard libraries usage

Ships With

Board

Required Tools

Accessory Tools

Documents

Application Note

AN3990: Upgrading STM32F4DISCOVERY board firmware using a USB key (pdf)

License Agreement

Evaluation products license agreement (pdf)

Product Brief/Fact sheet

DB2042: Discovery kit with STM32F429ZI MCU (pdf)

STM32 for makers Releasing your creativity (pdf)

User Manual/Guide

UM1662: Getting started with the STM32F429 Discovery kit (pdf)

UM1670: Discovery kit for STM32F429/439 lines (pdf)

UM1680: Getting started with STM32F429 Discovery software development tools (pdf)

Downloads

Bill of Materials

STM32F429I-DISCO BOM (zip)

Schematics/Layout Files

STM32F429I-DISCO gerber files (zip)

STM32F429I-DISCO schematics (zip)

Tags: cortex-m4, STM32F429ZI, primary_platforms, stm, mcu, development_platforms_kits, arm

Discovery kit with STM32F429ZI Microcontroller Unit

e14-publisher — Thu, 16 Dec 2021 03:18:51 GMT

Revision 2 posted to Documents by e14-publisher on 12/16/2021 3:18:51 AM

Discovery kit with STM32F429ZI Microcontroller Unit

Manufactured By:ST Microelectronics

Part Number:STM32F429I-DISC1

Buy Now

The STM32F429 Discovery kit (32F429IDISCOVERY) allows users to easily develop applications with the STM32F429 high-performance MCUs with ARM^®Cortex^®-M4 core.

It includes an ST-LINK/V2 or ST-LINK/V2-B embedded debug tool, a 2.4" QVGA TFT LCD, an external 64-Mbit SDRAM, an ST MEMS gyroscope, a USB OTG micro-AB connector, LEDs and push-buttons.

Features

STM32F429ZIT6 microcontroller featuring 2 Mbytes of Flash memory, 256 Kbytes of RAM in an LQFP144 package
On-board ST-LINK/V2 on STM32F429I-DISCO or ST-LINK/V2-B on STM32F429I-DISC1
mbed^™-enabled (mbed.org) with ST-LINK/V2-B only
USB functions:
- debug port
- virtual COM port with ST-LINK/V2-B only
- mass storage with ST-LINK/2-B only
Board power supply: through the USB bus or from an external 3 V or 5 V supply voltage
2.4" QVGA TFT LCD
64-Mbit SDRAM
L3GD20, ST MEMS motion sensor 3-axis digital output gyroscope
Six LEDs:
- LD1 (red/green) for USB communication
- LD2 (red) for 3.3 V power-on
- Two user LEDs: LD3 (green), LD4 (red)
- Two USB OTG LEDs: LD5 (green) VBUS and LD6 (red) OC (over-current)
Two push-buttons (user and reset)
USB OTG with micro-AB connector
Extension header for LQFP144 I/Os for a quick connection to the prototyping board and an easy probing
Comprehensive free software including a variety of examples, part of STM32CubeF4 package or STSW-STM32138 for legacy standard libraries usage

Ships With

Board

Required Tools

Accessory Tools

Documents

Application Note

AN3990: Upgrading STM32F4DISCOVERY board firmware using a USB key (pdf)

License Agreement

Evaluation products license agreement (pdf)

Product Brief/Fact sheet

DB2042: Discovery kit with STM32F429ZI MCU (pdf)

STM32 for makers Releasing your creativity (pdf)

User Manual/Guide

UM1662: Getting started with the STM32F429 Discovery kit (pdf)

UM1670: Discovery kit for STM32F429/439 lines (pdf)

UM1680: Getting started with STM32F429 Discovery software development tools (pdf)

Downloads

Bill of Materials

STM32F429I-DISCO BOM (zip)

Schematics/Layout Files

STM32F429I-DISCO gerber files (zip)

STM32F429I-DISCO schematics (zip)

Tags: cortex-m4, STM32F429ZI, primary_platforms, stm, mcu, development_platforms_kits, arm

Discovery kit with STM32F429ZI Microcontroller Unit

e14-publisher — Mon, 18 Oct 2021 20:22:36 GMT

Revision 1 posted to Documents by e14-publisher on 10/18/2021 8:22:36 PM

Discovery kit with STM32F429ZI Microcontroller Unit

Manufactured By:ST Microelectronics

Part Number:STM32F429I-DISC1

Buy Now

The STM32F429 Discovery kit (32F429IDISCOVERY) allows users to easily develop applications with the STM32F429 high-performance MCUs with ARM^®Cortex^®-M4 core.

It includes an ST-LINK/V2 or ST-LINK/V2-B embedded debug tool, a 2.4" QVGA TFT LCD, an external 64-Mbit SDRAM, an ST MEMS gyroscope, a USB OTG micro-AB connector, LEDs and push-buttons.

Features

STM32F429ZIT6 microcontroller featuring 2 Mbytes of Flash memory, 256 Kbytes of RAM in an LQFP144 package
On-board ST-LINK/V2 on STM32F429I-DISCO or ST-LINK/V2-B on STM32F429I-DISC1
mbed^™-enabled (mbed.org) with ST-LINK/V2-B only
USB functions:
- debug port
- virtual COM port with ST-LINK/V2-B only
- mass storage with ST-LINK/2-B only
Board power supply: through the USB bus or from an external 3 V or 5 V supply voltage
2.4" QVGA TFT LCD
64-Mbit SDRAM
L3GD20, ST MEMS motion sensor 3-axis digital output gyroscope
Six LEDs:
- LD1 (red/green) for USB communication
- LD2 (red) for 3.3 V power-on
- Two user LEDs: LD3 (green), LD4 (red)
- Two USB OTG LEDs: LD5 (green) VBUS and LD6 (red) OC (over-current)
Two push-buttons (user and reset)
USB OTG with micro-AB connector
Extension header for LQFP144 I/Os for a quick connection to the prototyping board and an easy probing
Comprehensive free software including a variety of examples, part of STM32CubeF4 package or STSW-STM32138 for legacy standard libraries usage