Raspberry Pi Compute Module 5 (Wireless 16GB RAM 64GB eMMC)

e14-publisher — Wed, 27 Nov 2024 08:12:58 GMT

Current Revision posted to Documents by e14-publisher on 11/27/2024 8:12:58 AM

Raspberry Pi Compute Module 5 (Wireless 16GB RAM 64GB eMMC)

Manufactured By:Raspberry Pi

This product is not yet available.

Raspberry Pi Compute Module 5 is a system-on module that delivers the power of Raspberry Pi 5 in a form factor ideal for embedded applications. Priced from $45 and featuring a quad-core Arm Cortex-A76 processor, dual 4Kp60 HDMI output, Gigabit Ethernet, optional fully-certified wireless module providing Wi-Fi® and Bluetooth connectivity, and a variety of RAM and eMMC flash options, Compute Module 5 enables you to leverage Raspberry Pi 5’s powerful hardware and optimised software stack in your own custom systems and form factors.

Compute Module 5 features additional I/O interfaces compared with its predecessor, allowing even more flexibility and providing a greater breadth of options for product and application design. Compute Module 5 is also available without eMMC flash for cost-sensitive applications.

Also available to assist product designers is the Raspberry Pi Development Kit for Compute Module 5, offering an ideal environment for prototyping embedded solutions. This comprehensive kit includes a Compute Module 5 and Compute Module 5 IO Board and all the essential accessories to kick-start your product design.

Features

Form factor

55 mm × 40 mm × 4.7 mm module
4 × M2.5 mounting holes

Processor

Broadcom BCM2712 quad-core 64-bit Arm Cortex-A76 (Armv8) SoC @ 2.4GHz

Memory

Options for 2GB, 4GB, 8GB, 16GB LPDDR4-4267 SDRAM with ECC
Options for 0GB (Lite), 16GB, 32GB or 64GB eMMC flash memory

Connectivity

Options for certified radio module containing:

2.4 GHz / 5.0 GHz IEEE 802.11 b/g/n/ac wireless
Bluetooth 5.0, BLE
On-board electronic switch to select between PCB trace or external antenna

Gigabit Ethernet PHY supporting IEEE 1588
1 × PCIe x1 root complex, Gen 2 (5Gbps)
1 × USB 2.0 port (high speed)
2 × USB 3.0 ports, supporting simultaneous 5Gbps operation

Up to 30 × GPIO supporting either 1.8V or 3.3V signalling and peripheral options:

Up to 5 × UART
Up to 5 × I2C
Up to 5 × SPI
1 × SDIO interface
1 × DPI (parallel RGB display)
1 × I2S
Up to 4 × PWM channels
Up to 3 × GPCLK outputs

Video

2 × HDMI 2.0 ports (supports up to 4Kp60 on both ports simultaneously)
2 × 4-lane MIPI ports supporting both DSI (display port) and CSI-2 (camera port)

Multimedia

4Kp60 HEVC decoder
OpenGL ES 3.1 graphics, Vulkan 1.2
1 × SDIO 2.0 (CM5 Lite)

Input power

Single +5V PSU input supports USB PD for up to 5A @ 5V
Operating temperature: -20°C to +85°C
MTBF1 Ground Benign: 143 000 hours (168 000 hours CM5 Lite)
Production lifetime: Raspberry Pi Compute Module 5 will remain in production until at least January 2036

Note: The options above may not explicitly apply to the product on this page, they apply to the range of options available for the Raspberry Pi 5 Compute Module 5 product.

Required Tools

Accessory Tools

Documents

Data Sheet

Raspberry Pi Compute Module 5 Datasheet

Tags: Compute Module 5, CM5, primary_platforms, raspberry pi compute module 5, raspberry_pi, rpicm5, mcu, development_platforms_kits

Raspberry Pi Compute Module 5 (Wireless 16GB RAM 64GB eMMC)

e14-publisher — Wed, 27 Nov 2024 08:01:01 GMT

Revision 1 posted to Documents by e14-publisher on 11/27/2024 8:01:01 AM

Raspberry Pi Compute Module 5 (Wireless 16GB RAM 64GB eMMC)

Manufactured By:Raspberry Pi

This product is not yet available.

Features

Form factor

55 mm × 40 mm × 4.7 mm module
4 × M2.5 mounting holes

Processor

Broadcom BCM2712 quad-core 64-bit Arm Cortex-A76 (Armv8) SoC @ 2.4GHz

Memory

Options for 2GB, 4GB, 8GB, 16GB LPDDR4-4267 SDRAM with ECC
Options for 0GB (Lite), 16GB, 32GB or 64GB eMMC flash memory

Connectivity

Options for certified radio module containing:

2.4 GHz / 5.0 GHz IEEE 802.11 b/g/n/ac wireless
Bluetooth 5.0, BLE
On-board electronic switch to select between PCB trace or external antenna

Gigabit Ethernet PHY supporting IEEE 1588
1 × PCIe x1 root complex, Gen 2 (5Gbps)
1 × USB 2.0 port (high speed)
2 × USB 3.0 ports, supporting simultaneous 5Gbps operation

Up to 30 × GPIO supporting either 1.8V or 3.3V signalling and peripheral options:

Up to 5 × UART
Up to 5 × I2C
Up to 5 × SPI
1 × SDIO interface
1 × DPI (parallel RGB display)
1 × I2S
Up to 4 × PWM channels
Up to 3 × GPCLK outputs

Video

2 × HDMI 2.0 ports (supports up to 4Kp60 on both ports simultaneously)
2 × 4-lane MIPI ports supporting both DSI (display port) and CSI-2 (camera port)

Multimedia

4Kp60 HEVC decoder
OpenGL ES 3.1 graphics, Vulkan 1.2
1 × SDIO 2.0 (CM5 Lite)

Input power

Single +5V PSU input supports USB PD for up to 5A @ 5V
Operating temperature: -20°C to +85°C
MTBF1 Ground Benign: 143 000 hours (168 000 hours CM5 Lite)
Production lifetime: Raspberry Pi Compute Module 5 will remain in production until at least January 2036

Note: The options above may not explicitly apply to the product on this page, they apply to the range of options available for the Raspberry Pi 5 Compute Module 5 product.

Required Tools

Accessory Tools

Tags: Compute Module 5, CM5, primary_platforms, raspberry pi compute module 5, raspberry_pi, rpicm5, mcu, development_platforms_kits