Atmel SAMA5D3 Xplained Click Boards

bluescreen — Fri, 08 Oct 2021 07:54:20 GMT

Current Revision posted to Documents by bluescreen on 10/8/2021 7:54:20 AM

Start with the Arduino UNO Click Shield Adapter Board

Buy Now

The Arduino Uno Click Shield Adapter provides an interface between MikroElektronika's Click boards to the Atmel SAMA5D3.

Two mikroBUS host connectors for attaching your Click Boards

Arduino UNO compatible connectors on opposite side

Easily add more features like Bluetooth, ADC, temperature and humidity functions via Click boards.

Designed to conform to Arduino Uno dimensions

Tech Specs

Now Available! Add on Click Boards

Bluetooth Click

Buy

More Info

Thermo Click

Buy

More Info

SHT11 Click

Buy

More Info

Analog to Digital (ADC) Click

Buy

More Info

BEE Click

Buy

More Info

GPS Click L10

Buy

More Info

GSM Click

Buy

More Info

Click boards are plug-and-play modules designed to add extra functionality to existing development kits. These small, function-specific add-on boards/modules all have a common interface to the mikroBUS™ adapter board. Multiple Click boards can also be used simultaneously to enable many features to be implemented at the same time. These Click boards offer a dual power design, 3.3V and 5V, taking the issue of power supply out of the equation.

There are over 70 Click Boards available allowing developers to easily implement features such as Bluetooth, temperature sensing, humidity sensing and analog-to-digital conversion. Here’s four we’re featuring now – check back for updates as we add more Click Boards to the list!http://www.element14.com/community

Buy Now	Bluetooth Click Fully certified Class 1 Bluetooth 2.1 + EDR module Bluetooth SIG qualified UART (SPP or HCI) and USB (HCI only) data connection hardware interfaces Supports Bluetooth data link to iPhone/iPad/iPod Touch Tech Specs http://www.element14.com/community
Buy Now	Thermo Click Cold-Junction Compensation 14-Bit, 0.25°C Resolution Simple SPI-Compatible Interface (read-Only) Detects Thermocouple Shorts to GND or VCC Tech Specs http://www.element14.com/community
Buy Now	SHT11 Click Temperature can be represented in 12-bit or 14-bit format in operating range from -40 to +100°C with accuracy of +/-0.5°C at room temperature Humidity can be represented in 8-bit or 12-bit resolution with +/-3% accuracy Typical standby, 400nA max Tech Specs http://www.element14.com/community
Buy Now	Analog to Digital (ADC) Click 12 bit ADC converter (Microchip MCP3204) Up to 50k samples per second 4 input channels Tech Specs http://www.element14.com/community
Buy Now	BEE Click 2.4GHz IEEE 802.15.4 Transceiver module supports ZigBee™, MiWi™, and MiWi P2P protocols FCC (USA), IC (Canade), ETSI (Europe) Certified Integrated PCB Antenna with simple four-wire SPI interface to PIC® microcontroller Low current consumption (Tx 23mA, Rx 19mA, Sleep 2uA) Hardware CSMA-CA Mechanism Automatic ACK response Hardware security engine (AES-128) Learn More http://www.element14.com/community
Buy Now	GPS Click L10 210 PRN channels 66 search channels 22 simultaneous tracking channels -165dBm tracking sensitivity Highest autonomous mode acquisition sensitivity, -148dBm Low tracking power consumption, 38mA (passive antenna) Up to 5Hz update rate Embedded with one 4Mbits flash memory Learn More http://www.element14.com/community
Buy Now	GSM Click Supports GSM/GPRS protocol stack 3GPP Supports GSM/GPRS 850/900/1800/ 1900 MHz Quad-band frequency On-board antenna connector 3.5mm quadrupole earphone/microphone jack SIM card socket integrated at the bottom side of the board Easy integration with mikroBUS™ form factor Supported in all mikroElektronika compilers Tech Specs

Other Accessories to Extend your Atmel SAMA5D3's Features

Buy Now

WiFi Dongle

Adding WiFi to your board is as simple as plugging in this dongle into a USB port.

Uses latest 802.11n technology

Supports data rates up to 150Mbps

Supports wireless roaming

Tech Specs

Buy Now

4.3" LCD Module and Adapter Board

TFT-LCD Module with 16/24-bit RGB parallel conversion board

TSC2046 chip for touch functionality

3.3V regulation chip with I2C control capability and PWM backlight

Supports 16- and 24-bit driving modes for LCD displays

4-wire SPI resistive touch screen

Tech Specs

Buy Now

UART8000-U - A USB to Serial Debugging Cable

This cable converts from USB to 3-pin TTL allowing for simple and quick debugging of devices compatible with your Atmel SAMA5D3. It is also suitable for serial communications at TTL voltage levels.

Tech Specs

What Software Works with Click Boards?

µC/Probe ™ Graphical Live Watch™

Micrium’s µC/Probe is a Windows application that allows you to read and write the memory of any embedded target processor during run-time, and map those values to a set of virtual controls and indicators placed on a graphical dashboard.

Absolutely no programming is required – simply drag and drop the graphic components into place, and watch them go.

This software is a must-have runtime agnostic tool to display and control just about any I/O variable in a target system thru rich graphical objects on the host computer. No code on target needed when using JLINK or select JTAG interfaces. Tech Specs

Tags: bluetooth, sama5d3_xplained, mikrobus_cape, accessory, humidity, mikrobus, temperature, click, sama5d3, click_board, sama5d3_accessory, adc, xplained

Atmel: Introduction to ATSAMA5D3-XPLD Xplained Kit - Video

atomar — Fri, 08 Oct 2021 07:50:32 GMT

Current Revision posted to Documents by atomar on 10/8/2021 7:50:32 AM

www.youtube.com/watch

The SAMA5D3 Xplained is a fast prototyping and evaluation platform for microprocessor-based design. The board based on SAMA5D36 comes with a rich set of ready to use connectivity and storage peripherals and expansion headers for easy customization. A Linux distribution and software package gets you running fast. Learn More

Documents

migration.user — Fri, 01 Oct 2021 18:01:31 GMT

Current Revision posted to Documents by migration.user on 10/1/2021 6:01:31 PM