Gizmo2: 3D Printable Enclosure - First Iteration

RE: Gizmo2: 3D Printable Enclosure - First Iteration

fvan — Mon, 13 Apr 2015 10:28:09 GMT

Also, keep in mind this as a firs version of a case, I have yet to apply some improvements and corrections. As can be seen in the pictures of the printed case, I had to adapt the opening for the audio jack. You might want to consider Brian's case which appears to be more professional [View:/resized-image/__size/16x16/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-21e90655-4d24-44c7-80c4-16672d0f5bae/contentimage_5F00_3.png:16:16] GIZMO 2 another 3D printed enclosure

RE: Gizmo2: 3D Printable Enclosure - First Iteration

Robert Peter Oakes — Mon, 13 Apr 2015 04:50:20 GMT

Hi Frederick, when printing your case, did you hav eissues with curling on the corners

I finally got my Robox 3D printer and tried twice to pring he case, the top and botton came out reasonably well but the middle curked up by over 16th of an inch making the result very un-usable

I was using Purple ABS on the ROBOX

Can you provide the settings you used ?

if anyone else has any tips to help, it would be appreciated as im very new to this

Thanks

RE: Gizmo2: 3D Printable Enclosure - First Iteration

bwelsby — Mon, 26 Jan 2015 22:09:58 GMT

A nice simple design, I like it...

You have beat me to it [View:/resized-image/__size/16x16/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-21e90655-4d24-44c7-80c4-16672d0f5bae/contentimage_5F00_2516.png:16:16] I have been designing one using OpenSCAD and currently printing first prototype as I write this.