Hi,
When I type this command I get this error.
$ make mx6q-sabrelite_android_config
make: *** No rule to make target `mx6q-sabrelite_android_config'. Stop.
How do I fix this? I can not type
$ make
after that because I get:
System not configured - see RE…
Hi,
The documentation for building u-boot and kernel images seems to have a problem with this command:
$ export CROSS_COMPILE=~/android-imx6-r13.3/prebuilt/linux-x86/toolchain/arm-eabi-
4.4.3/bin/arm-eabi-
This does not exist. It seems to be incomplete. What…
This probably sounds like a very noobish question (mainly because I am a noob), but are there any uses of the SABRE Light i.MX6 Platform Development Kit other than pretty much just using it as a mini computer?
Hello friends,
Greetings to all!!
Can anybody let me know if you have used the CAN interface and built any application over it?
I am planning to buy development kit for i.MX6 quad for a CAN based project. Please throw some light.
Thanks in advance.
Good morning,
I just received my IMX 6 Element 14 devlopment Kit and I try to put some free linux on it. My goal is to use the 2D and 3D graphical card's acceleration. So I try first to build the sabre_lite yocto image as in the thread ( https://community…
Do element14/embest have any plans to make gerbers available ?
It would be useful to be able to seperate VDD_SNVS_IN (G11) from VDDHIGH_IN_1/2 (H9,J9) and connect VDD_SNVS_IN to a 3v coincell to enable a useful RTC. However it's not clear if this would…
The schematics seem to suggest that the 1GB of onboard memory has the option of using different devices to provide 2GB.
Is there any intention to sell a version of the Sable-Lite with 2GB or the iMX6's theoretical 4GB maximum ?
Having a fast quad-core…
For example I'd like to be able to do some stuff with the PCIe interface on J23 which is a "7Pin Connector 53047-0710 Pitch:1.25mm; MOLEX".
When searching for the parts to make up a cable it appears I'll need the following:
Hello,
I've been working with the SABRE Lite BSP offered now with WEC2013.
We have 4 of the Element 14 SABRE Lite boards and have successfully booted WinCE 2013, however we have struggled to get HDMI working and some of the board peripherals.
Hello everyone,
I am unaware as to who sets clock speed on the i2c bus and specifically on the /dev/i2c-2 which is exposed on the board so as to drive external equipment.
I am looking into the linux-boundary kernel files in yocto (dylan) build dir, but…
If some of you are interested in evaluating FOR FREE this single computer board alternative to the Raspberry-Pi
Just register HERE to get a chance to win one of the five Element14 i.MX6 Sabre-Lite board.
More information concerning Elektroniknet.de : WWW…
we build our board based on sabers lite. But we want to support quad/dual/dual lite/solo with the same board. Can the core circuit of saber lite be ok for the dual/dual lite/solo? will the ddr3 and power parts of sabre lite'schematic be ok for dual/dual…
archlinuxarm.org has http://archlinuxarm.org/platforms/armv7/nitrogen6x which while technically for the boundary nitrogen6x board may just be able to boot on a Sabre-Lite. I'll test it sometime in the next couple of days when my new microSD cards arrive…
The Boundary Devices guys have a load of interesting iMX6 info including kernel patches and various fixes in their blog
Interesting writeup on improving ethernet throughput from Boundary Devices:
Not Sabre-Lite specific, but full of lots of useful info none the less.
Of interest here might be the Android BSP
Lots of useful info on how to compile your own kernel, build your own u-boot, use the usb-otg utils to 'unbrick' your board.
http://www.eewiki.net/display/linuxonarm/i.MX6x+SABRE+Lite
note that if you go this route to get a mainline linux kernel…
Lots of useful info for Sabre-Lite / iMX6
