https://community.element14.com/products/devtools/single-board-computers/warp7/Warp 7en-USTelligent Community 12https://community.element14.com/products/devtools/single-board-computers/warp7/f/forum/52408/mipi-dsi-supportFri, 03 Feb 2023 04:50:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:03b410c7-4cf1-4732-b3fa-bc360a8e0ff9satdsOn warp7 board, I am trying to enable mipi dsi display in u-boot, but looks like mipi dsi controller support is not available, can you guide me on that?https://community.element14.com/products/devtools/single-board-computers/warp7/m/managed-videos/140363Wed, 10 Nov 2021 19:56:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:d18a8b0f-8c87-4910-8b8d-e05282b068a2pchanThe element Warp 7 is a tiny development platform thathttps://community.element14.com/products/devtools/single-board-computers/warp7/w/setupWed, 10 Nov 2021 05:02:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:b30cc959-c425-41e5-beea-18dbde68338fChristyZThe documents in this Wiki can be used to populate widgets on the group home page. "Featured Content Triptych Setup Doc" contains the 3 featured items - image, descriptive text, and button, that you can edit to change the image, text and link/button text as appropriate for this group. If there isn't already a 3-box widget showing on the home page for this group, to display the document, you will need to get someone with Admin rights (one of the Devs or Pauline's team) to add a Wiki Viewer widget for you and insert the url to the document. From then on, you will be able to update the content of that widget by making changes to the document. "Featured Video Setup Doc" lets you embed a video - YouTube, Brightcove, or an image that links to a document somewhere on the site that contains the video - and that can also be put into a Wiki Viewer (in the skinny column) using the url. From then on, that widget can be updated by changing out the image/link or embedded video that is in that document.https://community.element14.com/products/devtools/single-board-computers/warp7/w/setup/27196/featured-video-setup-docWed, 10 Nov 2021 05:02:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:df0e6a68-96ab-4fe3-a2f5-8501df199d05ChristyZfeaturedVideohttps://community.element14.com/products/devtools/single-board-computers/warp7/w/setup/27197/featured-content-triptych-setup-docWed, 10 Nov 2021 05:02:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:b7af993c-5d1d-4d6a-9705-91a2c0a35762ChristyZFeature 1 Sub Title 1 Description for Feature 1 - enter whatever text you wish to use as the description here Button Text 1 Feature 2 Sub Title 2 Description for Feature 2 - enter whatever text you wish to use as the description here Button Text 2 Feature 3 Sub Title 3 Description for Feature 3 - enter whatever text you wish to use as the description here Button 3 Texthttps://community.element14.com/products/devtools/single-board-computers/warp7/w/setupWed, 10 Nov 2021 05:02:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:f62b50ac-c6c2-45bc-ae12-a4e3eb14fc0fhttps://community.element14.com/products/devtools/single-board-computers/warp7/m/managed-videosThu, 07 Oct 2021 20:32:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:267a3b98-0d0d-4c4b-9171-8c8f1e97fa89https://community.element14.com/products/devtools/single-board-computers/warp7/w/documents/1822/warp7-development-platformWed, 06 Oct 2021 20:56:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:fe0b4c20-b09e-4bc6-9afe-ab973939c398pchanwww.youtube.com/watch See more on WaRP7development_platformwarp7product_videohttps://community.element14.com/products/devtools/single-board-computers/warp7/w/documentsWed, 06 Oct 2021 20:56:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:563d6b14-efcb-42eb-8067-2d4aefae77f5https://community.element14.com/products/devtools/single-board-computers/warp7/b/blogFri, 01 Oct 2021 18:05:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:0c5be53a-9da4-4867-b929-1e6068373983https://community.element14.com/products/devtools/single-board-computers/warp7/f/forumFri, 01 Oct 2021 18:05:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:b4c0df39-b73c-4af9-a68e-d8506be7b523https://community.element14.com/products/devtools/single-board-computers/warp7/w/documentsFri, 01 Oct 2021 18:05:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:c40c22b3-f61e-4486-b90f-2faa04c85412migration.userhttps://community.element14.com/products/devtools/single-board-computers/warp7/Fri, 01 Oct 2021 13:15:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:60f69bb9-5b93-43af-b346-0f23778a3c11Warp 7https://community.element14.com/products/devtools/single-board-computers/warp7/f/forum/39468/debugging-and-integration-of-3rd-party-modules-in-warp7Tue, 30 Jun 2020 10:25:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:18a956a7-2f81-4ec4-9fec-090055248c51gabustagHello, i would like to know few things. 1. is there a document /video tutorial about " how to debug Warp7"? 2. if i want to add my own 3rd party sensors how can i 1. get low level drivers for the same ( for example SPI, UART) and if it is possible, do we have low level configurator/generator for the same for fast development? Regards Addihttps://community.element14.com/products/devtools/single-board-computers/warp7/f/forum/30463/linux-dtb-support-to-run-cortex-a7-and-cortex-m4-simultaneously-on-warp-7/140330Fri, 23 Aug 2019 17:31:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:23dbd1dc-1b49-462a-b7d1-97782ccac200clem57Warp 7 sounds like a nice board.https://community.element14.com/products/devtools/single-board-computers/warp7/f/forum/38215/how-to-use-cpu-board-only-configuring-efusesTue, 09 Apr 2019 12:01:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:da45e355-0d50-49e5-8b1a-2f60b8652006mreifHi guys, i need help to run the CPU-Board without the IO-Board. As far as i understand the situation this does simply not work because the Jumpers on the IO-Board are not present the the CPU-Board goes into serial Bootloader-Mode. So my solution would be to set the efuses in a way that the board does always boot into emmc except the jumpers are set so that the serial bootloader could be used. I already broke one board by setting the wrong fuses and i would like some help an the matter. So far i found out that the the documentation on the fuses can be found here: IMX7DRM but i have trouble understanding it correctly. I also know that i can burn the fuses in u-boot with the command "fuse prog". Can someone tell me which fuse i would have to burn and how the excat command would look like? Thank you very much!https://community.element14.com/products/devtools/single-board-computers/warp7/f/forum/9682/warp-7-expansion-portsWed, 03 Apr 2019 14:14:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:f27cec03-3354-4ee4-b858-63310e28f63aorenroccoHow do I access the access the expansion ports, are they GPIOs, and in addition what are their addresses? Please help ASAPhttps://community.element14.com/products/devtools/single-board-computers/warp7/f/forum/9418/is-there-any-way-to-get-non-allegro-brd-layout-design-files-for-the-warp-7-development-boardFri, 07 Dec 2018 15:24:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:0c136116-57e8-485f-8bd3-35a8b5c362f8caha0068It is impossible to convert and work with the files using an editor that is not Cadence Allegro and that is not very supportive of an open source schema. If we could get an ASCII version at the very least, that would be nice.https://community.element14.com/products/devtools/single-board-computers/warp7/f/forum/32881/usb-mass-storage-can-t-be-detected-as-dev-sdb/120637Wed, 12 Sep 2018 14:31:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:ba0471ae-013c-4fe4-a1a8-21c46d6c932aelem2018According to your hints I tried the same process wiht a pure 4-Port USB 2.0 hub instead of previous 4-Port USB 2.0/3.0 hub. But the results are the same. WARP7 is deteced firstly as USB storage device but resetted subsequently. Finally I noticed that the USB 2.0 driver on my laptop is virtual ehci-pci driver because I use VM Ubuntu as guest system. So I changed to standalone ubuntu box and tried the same process again, and now it works just fine, without any issue. So the solution is to use linux box instead of the VM linux guest. This case can be closed. -Xihttps://community.element14.com/products/devtools/single-board-computers/warp7/f/forum/32881/usb-mass-storage-can-t-be-detected-as-dev-sdb/120332Wed, 29 Aug 2018 09:28:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:dbdf951e-142c-4dc4-9174-fb75279c66bcGough LuiI'm not familiar with the hardware you're dealing with .... but some suggestions would be Perhaps try a different USB drive or device - your particular unit seems to have known problems under Linux, specifically this line: [ 997.717282] usb-storage 1-1:1.0: Quirks match for vid 0525 pid a4a5: 10000 That seems to imply that this particular device has some issues with its behaviour that causes strange behaviour and some workarounds are being applied. It's worth trying a different drive just to see if it is the drive itself or something else. Another thing which seems a little strange to me is that the drive seems to be registered using the uas driver and then it seems to be reset/dropped out after a while: [ 997.740037] usbcore: registered new interface driver uas [ 1020.196637] usb 1-1: reset high-speed USB device number 2 using ehci-pci This seems to imply to me that your device is behaving like a USB external hard drive/SSD using a bridge chip (maybe)? It's seemingly confusing the operating system as normally UASP is only used over USB 3.0 interfaces, and it's connected using EHCI (USB 2.0) rather than xHCI (USB 3.0). I'd try using a USB 2.0 only bridge board or enclosure, or a non UASP capable bridge chip as an alternative, or even a USB 3.0 one but with a different chipset. Otherwise check the power supply to the drive (if it needs a high amount of power, it might not work) and the cable (esp if using cheap USB-OTG cable, this could be a source of issues). Maybe disabling the UAS driver could help. - Gough