Altera: P0082 DE0-Nano Development Board

atomar — Fri, 12 Feb 2016 14:57:59 GMT

Current Revision posted to Documents by atomar on 2/12/2016 2:57:59 PM

BUY NOWBUY NOW

Development Tools

Overview

The P0082 DE0-Nano boardP0082 DE0-Nano board introduces a compact-sized FPGA development platform suited for to a wide range of portable design projects, such as robots and mobile projects. The DE0-Nano is ideal for use with embedded soft processors, it features a powerful Altera Cyclone IV FPGA (with 22,320 logic elements), 32 MB of SDRAM, 2 Kb EEPROM, and a 16 Mb serial configuration memory device. For connecting to real-world sensors the DE0-Nano includes a 8-channel 12-bit A/D converter, and it also features an 13-bit, 3-axis accelerometer device.

The DE0-Nano board includes a built-in USB Blaster for FPGA programming, and the board can be powered either from this USB port or by an external power source. The board includes expansion headers that can be used to attach various Terasic daughter cards or other devices, such as motors and actuators. Inputs and outputs include 2 pushbuttons, 8 user LEDs and a set of 4 dip-switches.

This platform allows user:

To extend designs beyond the DE0-Nano board with two external general-purpose I/O (GPIO) headers
To handle larger data storage and frame buffering with onboard memory devices including SDRAM and EEPROM
Provides enhanced user peripheral with LEDs and push buttons
Small and lightweight
Re-configurable without requiring superfluous hardware
Suitable for mobile designs where portable power is crucial, as it provides three power scheme options including a USB Mini-AB port, 2-pin external power header, and two DC 5-V pins

Key Applications: Broadcast, Consumer, Industrial, Wireless, Wireline.

More Development Kits and Tools
	More Altera Development Kits		Altera Overview
	Development Kits & Platform Room		element14 Design Centre

Development Tools

Software Development Tools:

Tool Type	Supplier	Supported Family	MPN	Description
IDE	Altera	ALL Altera Devices	Altera Quartus II	It's the industry's number one software in performance and productivity for CPLD, FPGA, and HardCopy ASIC designs. The Altera Quartus II software, the industry's number one software in performance and productivity for CPLD, FPGA, and HardCopy ASIC designs. Learn More

Hardware Development Tools:

Tool Type	Supplier	Supported Family	MPN	Description
Download Cable	Altera	ALL Altera Devices	PL-BYTEBLASTER2NPL-BYTEBLASTER2N	The ByteBlaster II enables a PC to configure or program Altera devices. The download cable drives configuration or programming data using a standard parallel printer port from the PC.
Download Cable	Altera	ALL Altera Devices	PL-USB-BLASTER-RCNPL-USB-BLASTER-RCN	The USB-Blaster drives configuration or programming data from the PC to configure or program Altera devices. The download cable interfaces to a standard USB PC port.

Technical Documents

Learning Center

Type	Description
User Manual	Altera: User Manual for DE0-Nano board
Datasheet	Altera: Datasheet for Cyclone IV Device

Design Elements

Type	Description
Schematic	Altera: Schematic File for P0082 DE0-Nano Development Board
Application Library	Altera: Application Library for DE0-Nano Control Panel
Application Library	Altera: Software Code for Demonstration Examples
Application Library	Altera: Application Library for DE0-Nano System Builder

Video

www.youtube.com/watch

Kit Features

The DE0-Nano Development Board features the following:

Cyclone IV EP4CE22F17C6NEP4CE22F17C6N FPGA
- 22,320 LEs
- 594-Kb embedded memory
- 66 embedded 18x18 multipliers
- 4 general-purpose phase-locked loops (PLLs)
- 153 maximum FPGA I/O pins
Configuration status and set-up elements
- Onboard USB-BlasterTM circuit for programming
- Altera® serial configuration device – EPCS16
Expansion header
- Two 40-pin headers (GPIOs) provides 72 I/O pins
- Two 5-V power pins, two 3.3-V power pins, and four ground pins
- One 26-pin header provides 16 digital I/O pins and 8 analog input pins to connect to analog sensors
Memory devices
- 32-MB SDRAM
- 2-Kb I2C EEPROM
General user input/output
- 8 green LEDs
- 2 debounced push buttons
- 4 dual in-line package (DIP) switches
G-sensor
- 3-axis accelerometer with high resolution (13 bits)
Analog-to-digital converter
- 8-channel, 12-bit analog-to-digital converter
- 50 ksps to 200 ksps
Clock system
- Onboard 50-MHz clock oscillator
Power supply
- USB Type Mini-AB port (5 V)
- Two DC 5-V pins of the GPIO headers (5 V)
- 2-pin external power header (3.6 V – 5.7 V)
Connectivity
- Connect D5M
  - Connect with 5-megapixel CMOS sensor (D5M)
- Connect LTM
  - Connect with LCD touch screen module (LTM)
- Connect THDB-ADA
  - Connect with analog-to-digital / digital-to-analog conversion daughtercard (THDB-ADA)
USB Mini-B cable

Kit Contents

The Altera's P0082 DE0-Nano Development BoardP0082 DE0-Nano Development Board supplied with below contents:

DE0-Nano board
DE0-Nano system CD ROM
Altera Complete Design Suite
DE0-Nano quick start guide
USB Cable

Tags: ep4ce22f17c6n, p0082, cyclone_iv, adc128s022, fpga, adxl345, de0-nano, field programmable gate array, development_board, altera