Atmel: ATAVRSB201 Development Kit

atomar — Tue, 29 Jan 2013 06:31:08 GMT

Current Revision posted to Documents by atomar on 1/29/2013 6:31:08 AM

Buy NowBuy Now

Development Tools

Kit Overview

The Atmel's ATAVRSB201ATAVRSB201 development kit for the Atmel ATmega16HVAATmega16HVA for battery packs with either one or two cells in series. The kit features autonomous battery protection, as well as very accurate voltage, current and temperature monitoring capabilities to protect the battery pack and surroundings from hazardous conditions and derive the most energy from the battery cells.This kit includes both the SB201-1 and the SB201-2 hardware.

The ATAVRSB201ATAVRSB201-1/SB201-2 kits are evaluation and development kits for the new Atmel AVR® smart battery device ATmega16HVAATmega16HVA. This device is made for battery packs with 1 series or 2 series lithium ion and lithium polymer cells, and feature autonomous battery protection as well as very accurate voltage, current and temperature monitoring capabilities. The device provides the means to protect the battery pack and surroundings from hazardous conditions and gain the most from the batteries.

The SB201-1 targets single cell smart batteries, while the SB201-2 targets dual cell smart batteries. The two products are based on the same firmware source code, compiled differently for each target-hardware. SB201 hardware for evaluation of the ATmega8HVA/16HVA device and the SB201 firmware are available as ATAVRSB201ATAVRSB201.

The SB201-1 and SB201-2 have a common PCB and only differ in which components are mounted and the silk screen. They will be commonly referred to as SB201.The SB201 consist of three parts, the edge connector, the main area and the connector and support area. The main area contains all the circuitry needed in a battery pack design.The main area contain the ATmega16HVAATmega16HVA device, charge and discharge N-FETs, 10mΩ sense resistor, decoupling capacitors, filter capacitors/resistors for the voltage and current ADCs and ESD protection.

Key Applications: Single Series Li-Ion Cell applications, 2 Series Li-Ion Cell applications.

More Development Kits and Tools
	Atmel Development Kits		Atmel Overview
	Development Platforms & Kits		element14 Knode

Development Tools

Software Development Tools:

Tool Type	Supplier	MPN	Supported Family	Description
IDE	Atmel	Atmel Studio 6	ALL AVR	Atmel Studio 6 Integrated Development Environment (IDE) is the integrated development environment (IDE) for developing and debugging Atmel ARM® Cortex™-M and Atmel AVR® microcontroller (MCU) based applications. The Atmel Studio 6 IDE gives you a seamless and easy-to-use environment to write, build and debug your applications written in C/C++ or assembly code. Learn More
RTOS	Micrium	Micrium uc/OSIII	AVR / AVR32	μC/OS-III is Micrium’s newest RTOS, designed for developers who need to save time on their current and next embedded sytem projects. Learn More
RTOS	Segger	embOS	AVR32	SEGGER embOS (Real Time Operating System) follows strict, yet efficient coding and documentation standards. embOS is a priority-controlled real time operating system, designed to be used as foundation for the development of embedded real-time applications. Learn More

Tool Type

Supplier

MPN

Supported Family

Description

IDE

Atmel

Atmel Studio 6

ALL AVR

Atmel Studio 6 Integrated Development Environment (IDE) is the integrated development environment (IDE) for developing and debugging Atmel ARM® Cortex™-M and Atmel AVR® microcontroller (MCU) based applications. The Atmel Studio 6 IDE gives you a seamless and easy-to-use environment to write, build and debug your applications written in C/C++ or assembly code. Learn More

RTOS

Micrium

Micrium uc/OSIII

AVR / AVR32

μC/OS-III is Micrium’s newest RTOS, designed for developers who need to save time on their current and next embedded sytem projects. Learn More

RTOS

Segger

embOS

AVR32

SEGGER embOS (Real Time Operating System) follows strict, yet efficient coding and documentation standards. embOS is a priority-controlled real time operating system, designed to be used as foundation for the development of embedded real-time applications. Learn More

Hardware Development Tools:

Tool Type	Supplier	MPN	Supported Family	Description
Debuggers, Emulators & JTAG Tools	Atmel	ATAVRDRAGONATAVRDRAGON	AVR UC3 / AVR XMEGA / megaAVR / tinyAVR	AVR Dragon JTAG Debugger Starter Kit for for 8-bit and 32-bit AVR devices
Debuggers, Emulators & JTAG Tools	Atmel	ATAVRONEKITATAVRONEKIT	AVR UC3 / AVR XMEGA / megaAVR / tinyAVR	AVR ONE! professional development tool for all Atmel 8-bit and 32-bit AVR devices
Debuggers, Emulators & JTAG Tools	Atmel	ATJTAGICE2ATJTAGICE2	AVR UC3 / AVR XMEGA / megaAVR / tinyAVR	AVR JTAGICE mkII mid-range development tool for Atmel 8-bit and 32-bit AVR devices
Debuggers, Emulators & JTAG Tools	Atmel	ATAVRISP2ATAVRISP2	AVR XMEGA / megaAVR / tinyAVR	AVRISP mkII Programmer for field upgrades of Atmel 8-bit AVR microcontrollers with ISP or PDI interfaces

Technical Documents

Learning Center

Type	Description
User Guide	Atmel: AVR and AVR32 - Quick Reference Guide
Application Note	Atmel: AVR351-Description of Runtime calibration and compensation of RC oscillators
Application Note	Atmel: AVR352-Application note on Using the Coulomb Counting ADC type
Application Note	Atmel: AVR353-Calibration of Voltage Reference for ADC Usage
Application Note	Atmel: AVR354-Application note on Using the Deep Under-Voltage Recovery Mode (DUVR)
Application Note	Atmel: Application Note for AVR455 Microcontroller
Application Note	Atmel: Application Note for SB201-1 and SB201-2 Dev Kits

Design Elements

Type	Description

Video

Video 1	Video 2
www.youtube.com/watch	www.youtube.com/watch

Kit Features

ATmega16HVA smart battery chip evaluation and development kits.
- ATAVRSB201ATAVRSB201-1 for Single Series Li-Ion Cell applications.
- ATAVRSB201ATAVRSB201-2 for 2 Series Li-Ion Cell applications.
High-side N-FETs.
10 mΩ sense resistor current measurements with the 18-Bit CC-ADC.
Input filters for cell voltages to the 12-bit voltage ADC.
All components on one side.
Four layer PCB with the reference design part implemented on two layers.
Balancing FETs.
Polarity safety FET.
Holes for mounting of pin headers or wires.
ISP connector for programming via SPI, and debugging via debugWIRE interface.
Provides all needed safety measures for a Lithium-Ion battery
- Over-voltage protection
- Under-voltage protection
- Protection against excessive discharge and charge currents
- Temperature checks
High accuracy voltage and current measurements
Communication
- Half-duplex 1-wire UART
- Command set based on Smart Battery Specification
AES based authentication

Kit Contents

The Atmel's ATAVRSB201ATAVRSB201 kit is supplied with below contents:

SB201-1 board
SB201-2 board

Tags: atmega16hva, sb201, avr, sb201-1, atavrsb201, sb201-2, atmega8hva, atmel