Embest: STM3210E-SK Starter Kit

atomar — Sun, 27 Oct 2013 03:02:45 GMT

Current Revision posted to Documents by atomar on 10/27/2013 3:02:45 AM

Buy NowBuy Now

Development Tools

Kit Overview

The Embest's STM3210E-SKSTM3210E-SK is the low cost development kit for STM32F103ZESTM32F103ZE (72MHz, the very popular ARM Cortex-M3 processor), including the STM32F103ZEH6STM32F103ZEH6 evaluation board (STM3210E Board) and Emlink for ARM JTAG adapter, so the developers can easy start to learn and test all the relevant applications on it, or evaluate your new project design through this entire system.

The STM3210E-SKSTM3210E-SK Starter Kit contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications:

ST STM3210E-SK/KEILSTM3210E-SK/KEIL ARM Cortex-M3 Board
Keil MDK-ARM Development Kit, 32K evaluation edition
Emlink for ARM - a high speed JTAG Emulator for ARM Cortex-M3 processors
Plenty of example programs, all in source code (These software examples can be debugged under the popular Keil MDK (Microcontroller Development Kit) environments, making practical use of the board's peripherals.)

The STM STM32F103ZESTM32F103ZE is an ARM embedded evaluation board produced by Embest, integrate the STMicroelectronic ARM Cortex-M3 core-based processor STM32F103ZEH6STM32F103ZEH6, operating at a 72 MHz frequency. The board features USB, CAN, SD Card interface, TFT-LCD, RS232 serial interface, four 26-pin user extended interface, etc.

Key Applications: Motor drive and application control ,Medical and handheld equipment, Medical monitors PC peripherals, Industrial applications PLC, inverters, printers, and scanners, Alarm systems, Video intercom, and HVAC

More Development Kits and Tools
	STMicroelectronics Development Kits		ARM Development Tools
	Development Platforms & Kits		element14 Knode

Development Tools

Software Development Tools:

Tool Type	Supplier	Supported Family	MPN	Description
IDE	ARM	ALL ARM	ARM DS-5	The ARM Development Studio 5 (DS-5) tool enable developers to get the best from their ARM technology-based systems. Whether implementing an ARM processor-based SoC or writing software for an Application Specific Standard Product (ASSP), ARM tools enable you to deliver the best solution with the highest performance and lowest power. Learn More
IDE	ARM	ALL ARM Cortex	KEIL MDK ARM	The MDK-ARM (Microcontroller Development Kit) is the complete software development environment for ARM7, ARM9, Cortex-M, and Cortex-R4 processor-based devices. Learn More
IDE	Embest	ARM Cortex M0 & M3	CoIDE	CooCox offer freely available powerful software development tool for ARM Cortex-M3 & Cortex-M0 based microcontrollers. Coocox Tools organizes and provides the knowledge required by developers. Learn More
RTOS	Embest	ARM Cortex M0 & M3	CoOS	CoOS is a free and open RTOS from CooCox, designed specifically for Cortex-M processor, supports preemptive priority and round-robin, Semaphore, Mutex, Flag, Mailbox and Queue for communication & synchronization, highly scalable, minimum system kernel is only 974Bytes, supports interrupt while task switching, supports stack overflow detection, supports the platforms of ICCARM, ARMCC, GCC. Learn More
RTOS	Micrium	ARM7 / AMR9	Micrium uc/OSIII	μC/OS-III is Micrium’s newest RTOS, designed for developers who need to save time on their current and next embedded sytem projects. Learn More
RTOS	ARM KEIL	ALL ARM	KEIL RTX	The Keil RTX is a royalty-free, deterministic Real-Time Operating System designed for microcontrollers based on ARM7™TDMI, ARM9™, and Cortex™-M CPU cores. Learn More
RTOS	Segger	ALL ARM	embOS	SEGGER embOS (Real Time Operating System) follows strict, yet efficient coding and documentation standards. embOS is a priority-controlled real time operating system, designed to be used as foundation for the development of embedded real-time applications. Learn More

Hardware Development Tools:

Tool Type	Supplier	Supported Family	MPN	Description
Debuggers, Emulators & JTAG Tools	Atmel	ARM	AT91SAM-ICEAT91SAM-ICE	USB JTAG In-Circuit Emulator for SAM3, SAM7 and SAM9 ARM-based microcontrollers
Debuggers, Emulators & JTAG Tools	ARM	ALL ARM	DSTRM-KT-0181ADSTRM-KT-0181A	DSTREAM Debug and Trace Unit
Debuggers, Emulators & JTAG Tools	ARM	ALL ARM	ULINK2ULINK2	USB Debugger
Debuggers, Emulators & JTAG Tools	ARM	ALL ARM	ULINKProULINKPro	High-Speed Debug and Trace Unit
Debuggers, Emulators & JTAG Tools	Segger	ARM / CORTEX-M/A/R	J-LinkJ-Link	USB JTAG Emulator
Debuggers, Emulators & JTAG Tools	Segger	ALL ARM Cortex-M	J-Trace for Cortex-MJ-Trace for Cortex-M	USB JTAG Emulator
Debuggers, Emulators & JTAG Tools	Segger	ALL ARM	J-Trace for ARMJ-Trace for ARM	USB JTAG Emulator
Flasher	Segger	ALL ARM	Flasher ARMFlasher ARM	ARM & Cortex M Flash Programmer

Technical Documents

Learning Center

Type	Description
User Manual	Embest: User Manual for STM32F103ZE ARM-CM3 Board (V1.0)
User Manual	Embest: User Manual for ARM Cortex-M3 V1.0
User Manual	STMicroelectronics: UM0877-1.4 kW digital power factor corrector based on the STM32F103ZE
User Manual	STMicroelectronics:UM0921-STM32-based LCD controller for TFT-LCDs
User Manual	STMicroelectronics: UM0688-Quick reference guide for the STEVAL-IHM022V1 STM32? dual motor drive demonstration board and software application
Datasheet	Embest: Datasheet for ARM-based 32-bit MCU with Flash USB, CAN 7 timers, 2 ADC, 9 communication interfaces
Datasheet	STMicroelectronics: STM32F103x Data Sheet
Reference Manual	STMicroelectronics: Reference Manual of STM32F101xx, STM32F102xx, STM32F103xx, STM32F105xx and STM32F107xx advanced ARM-based 32-bit MCUs

Design Elements

Type	Description
Schematics	Embest: Schematics File for STM32F103ZE Eval Board and STM3210E Starter Kit
Schematics	Embest: TFT LCD Schematic of STM32F103ZE Eval Board

Video

Video 1	Video 2
www.youtube.com/watch	www.youtube.com/watch

Kit Features

The ST STM3210E-SK/KEILSTM3210E-SK/KEIL ARM Cortex-M3 Board:

Includes one 2.4" TFT LCD
STM32F103ZESTM32F103ZE, ARM Cortex-M3 based, 72MHz
512KB Flash memory and 64KB SRAM
XTAL Frequency: 8 MHz
Two RS232 Interface
One CAN interface
One USB Device Interface
One TFT LCD interface
One MicroSD Card interface
One 20pins JTAG Interface
Four Push Buttons (Reset, Wake Up, Tampering, User)
One Joystick with 4-direction control and selector
One RTC Unit with backup Battery
One Temperature Sensor
One Analog Input (connected to potentiometer),
One Analog Output (connected to speaker by default)
Supply Voltage: 5 Volts DC (provided by USB Cable)
Board Size: 110mm x 140mm (4.33" x 5.5")

Keil MDK-ARM Development Kit

µVision IDE, debugger and simulation environment
ARM industry-leading C/C++ compiler from ARM
MicroLib highly optimized run-time library
Real-Time Trace for Cortex-M3 processor based devices
Keil RTX – deterministic Real-Time Operating System

Emlink for ARM

Supports debugging with Realview MDK and EWARM
Supports ARM Cortex-M3 processors: STM32, LPC17XX, AT91SAM3UE, etc.
JTAG 20 pins connects to target
Supports hardware and software breakpoints
Supports USB port connecting to host PC
Downloads and debugs speed up to 250KBytes/s (about 1.5Mbps)
Integrates seamlessly into IAR Embedded Workbench and Keil RealView MDK

Kit Contents

The Embest STM3210E-SKSTM3210E-SK Starter Kit is supplied with the below contents:

STM3210E-SK/KEILSTM3210E-SK/KEIL ARM Cortex-M3 Board
- One STM3210E-SK/KEILSTM3210E-SK/KEIL ARM-CM3 Board
- One RS-232RS-232 Serial Cable
- One USB Cable
- One 2.4" TFT LCD Panel (240x320)

Emlink for ARM
- One Emlink for ARM

Optional:

CDROM of STM32F10E Starter Kit (free)
- Documents -- user manual, data sheets and the other development documents.
- Images -- image files for this product.
- Software -- software programs for this product.
- Tools -- the utilities tools and software

Tags: arm_cortex_m3, stm3210e-sk, cortex-m3, stm32f103ze, stm, stm32f103, keil, arm, mdk_arm, embest, stmicroelectronic