NXP: Keil MCB Evaluation Boards for NXP LPC1700 Family Microcontrollers

Oliver — Wed, 30 Oct 2013 09:03:54 GMT

Current Revision posted to Documents by Oliver on 10/30/2013 9:03:54 AM

Buy NowBuy Now

Development Tools

Kit Overview

The Keil MCB1700 Evaluation Boards enable the user to create and test working programs based on the NXP LPC1700 family of ARM Cortex™-M3 processor-based devices. The NXP (founded by Philips) LPC1700 are ARM 32-bit Cortex™-M3 Microcontrollers with MPU, CPU clock up to 100MHz, 512kB on-chip Flash ROM with enhanced Flash Memory Accelerator, In-System Programming (ISP) and In-Application Programming (IAP), 64kB RAM, Nested Vectored Interrupt Controller, eight channel General purpose DMA controller, AHB Matrix, APB, Ethernet 10/100 MAC with RMII interface and dedicated DMA, USB 2.0 full-speed Device controller and Host/OTG controller with DMA, CAN 2.0B with two channels, four UARTs, one with full Modem interface, three I2C serial interfaces, three SPI/SSP serial interfaces, I2S interface, General purpose I/O pins, 12-bit ADC, 10-bit DAC, four 32-bit Timers with capture/compare, standard PWM Timer block, motor control PWM for three-phase motor control, quadrature encoder, watchdog timer, real time clock with optional battery backup, system tick timer, repetitive interrupt timer, brown-out detect circuit, power-on reset, power management unit, wakeup interrupt controller, crystal oscillator, 4MHz internal RC oscillator, PLL, JTAG and serial wire debug/trace port with ETM.

Both evaluation boards provide a color TFT LCD display and interfaces for MicroSD card, CAN, 100/10M Ethernet, and USB2.0 full speed Interface. The boards also feature a 5-position joystick to control port pin input. An LF Amplifier on the MCB1700MCB1700 connects the D/A output of the LPC1700 device to a speaker. Users may use this LF Amplifier to generate sound. An adjustable analog voltage source is on the MCB1700MCB1700 board for testing the Analog to Digital output feature of the LPC1700. A configuration jumper enables and disables this feature. In addition, the MCB1700MCB1700 board incorporates both a JTAG interface and a Cortex Debug + ETM interface for using with ULINK2 and ULINK Prorespectively.

Ordering Information:

Keil MPN	NXP MPN	Description
MCB1750MCB1750	OM11036OM11036	Keil MCB1750 Evaluation Board with NXP LPC1758LPC1758 device
MCB1750UMCB1750U		Keil MCB1750 Evaluation Board with NXP LPC1758LPC1758 device With ULINK2
MCB1750UMEMCB1750UME		Keil MCB1750 Evaluation Board with NXP LPC1758LPC1758 device With ULINKME
MCB1760MCB1760	OM11032OM11032	Keil MCB1760 Evaluation Board with NXP LPC1768LPC1768 device
MCB1760UMCB1760U		Keil MCB1760 Evaluation Board with NXP LPC1768LPC1768 device With ULINK2
MCB1760UMEMCB1760UME		Keil MCB1760 Evaluation Board with NXP LPC1768LPC1768 device With ULINKME
MCB1769MCB1769	OM11084OM11084	Keil MCB1700 Evaluation Board with NXP LPC1769LPC1769 device

Key Applications: eMetering, Alarm systems, Lighting, White goods, Industrial networking, and Motor control.

More Development Kits and Tools
	Other NXP Development Kits		NXP Overview
	Development Platforms & Kits		element14 Knode

Development Tools

Software Development Tools:

Tool Type	Supplier	MPN	Supported Family	Description
IDE	ARM	Keil MDK-ARM	ARM Cortex™-M / Cortex-R4 / ARM7™ / ARM9™	The MDK-ARM is a complete software development environment for Cortex™-M, Cortex-R4, ARM7™ and ARM9™ processor-based devices. MDK-ARM is specifically designed for microcontroller applications, it is easy to learn and use, yet powerful enough for the most demanding embedded applications. Learn More
RTOS	Micrium	µC/OS-II	LPC17xx	µC/OS-II, the Real-Time Kernel, is a portable, ROMable, scalable, preemptive, real-time deterministic multitasking kernel for microprocessors, microcontrollers and DSPs. Offering unprecedented ease-of-use, µC/OS-II is delivered with complete source code and in-depth documentation. Learn More
RTOS	Micrium	µC/OS-III	LPC17xx	μC/OS-III is Micrium’s newest RTOS, designed for developers who need to save time on their current and next embedded sytem projects. Using a commercial real-time kernel such as μC/OS-III provides a solid foundation and framework to the design engineer dealing with the growing complexity of embedded designs. Learn More
IDE	Embest	CoIDE	ARM Cortex™-M	CooCox offer freely available powerful software development tool for ARM Cortex-M3 & Cortex-M0 based microcontrollers. Coocox Tools organizes and provides the knowledge required by developers. Learn More
RTOS	Embest	CoOS	ARM Cortex™-M	CoOS is a free and open RTOS from CooCox, designed specifically for Cortex-M processor, supports preemptive priority and round-robin, Semaphore, Mutex, Flag, Mailbox and Queue for communication & synchronization, highly scalable, minimum system kernel is only 974Bytes, supports interrupt while task switching, supports stack overflow detection, supports the platforms of ICCARM, ARMCC, GCC. Learn More

Hardware Development Tools:

Tool Type	Supplier	MPN	Supported Family	Description
Emulator / Debugger / Programmer	ARM	ULINK2ULINK2	ARM Cortex™-M / ARM7™ / ARM9™	ULINK2 Debug Adapter
Emulator / Debugger / Programmer	ARM	ULINKProULINKPro	ARM Cortex™-M / ARM7™ / ARM9™	ULINKpro Debug and Trace Unit
Emulator	Segger	J-LinkJ-Link	ARM Cortex™-M / Cortex-R4 / Cortex-A / ARM7™ / ARM9™	JTAG/SWD Emulator with USB interface
Programmer	Segger	Flasher ARMFlasher ARM	ARM Cortex™-M / Cortex-R4 / Cortex-A / ARM7™ / ARM9™	Flash Programmer for ARM and Cortex cores
Debugger	Embest	ColinkExColinkEx	ARM Cortex™-M	ARM Cortex-M MCU JTAG Hardware Debugging Probe which supports in CooCox software and Keil Realview MDK

Technical Documents

Learning Center

Type	Description
User Guide	Keil: User Guide for MCB1700 Evaluatiom Board
User Guide	Keil: Quick Start Guide for MCB1700 Evaluation Board and Starter Kit
User Manual	NXP: User Manual for LPC17xx
Datasheet	NXP: Datasheet for LPC1769/68/67/66/65/64/63 - 32-bit ARM Cortex-M3 microcontroller
Datasheet	NXP: Datasheet for LPC1759/58/56/54/52/51 - 32-bit ARM Cortex-M3 MCU
Product Brief	NXP: Product Brief for NXP 32 bit microcontrollers
Product Brief	NXP: Product Brief for Looking for more 32-bit MCU options
Product Brief	NXP: Product Brief for Low-cost development platform for 32-bit LPC microcontrollers family
Product Brief	NXP: Product brief for Rapid prototyping for the LPC1768 MCU
Revision Note	NXP: Errata sheet for LPC1759/58/56/54/52/51
Application Note	NXP: AN10918 - IEC60335 Class B library
Application Note	NXP: AN11229 - Application Note for UUencoding for UART ISP
Application Note	NXP: AN10878 - Application Note for Migrating to the LPC1700 series
Application Note	NXP: AN10849 - Application note for LPC1700 - RTC hardware auto calibration
Application Note	NXP: AN10916 - Applicatio Note for FAT library EFSL and FatFs port on NXP LPC1700
Application Note	NXP: AN10917 - Application Note for Memory to DAC data transfers using the LPC1700's DMA
Application Note	NXP: AN10908 - Application Note for Wakeup from Deep Sleep using the CANActivity interrupt
Application Note	NXP: AN10974 - Application Note for LPC176x/175x 12 bit ADC design guidelines
Application Note	NXP: AN10913 - Application Note for DSP library for LPC1700 and LPC1300
Application Note	NXP: AN10943 - Application Note for Decoding DTMF tones using M3 DSP library FFT function
Application Note	NXP: AN10898 - Application Note for BLDC motor control with LPC1700

Design Elements

Type	Description
Schematic	NXP: Schematics for LPC176x ADC Board
Schematic	Keil: Schematics File for MCB1700 Evaluation Board and Starter Kit
Layout	NXP: Layout File for LPC176x ADC Board
BOM	NXP: BOM File for LPC176x ADC Board
BSP	NXP: BSP File for LPC176x ADC Board
Application Library	NXP: DSP library for LPC1700 and LPC1300
Application Library	NXP: Software Code for Ethernet throughput on the NXP ARM microcontrollers
Application Library	NXP: Software Code for In-Application Programming for the LPC1700
Application Library	NXP: Software Code for Accessing SDC/MMC card using SPI/SSP on LPC1700
Application Library	NXP: Software Cde for Capacitive touch sensing using the LPC176x/5x
Application Library	NXP: Software Code for Using Speex in NXP's LPC175x/6x MCU family
Reference Design	NXP: LPC1700 GPIO DMA source code
Reference Design	NXP: LPC1700 RTC calibration source code and calculator
Application Library	NXP: Software Code for MP3 player solution on NXP LPC1700 series

Video

www.youtube.com/watch

Kit Features

100MHz ARM Cortex-M3 processor-based MCU
On-Chip Memory: 512KB Flash and 64KB RAM
Color QVGA TFT LCD
10/100 Ethernet Port
USB 2.0 Full Speed - USB, USB-OTG, and USB Host
2 CAN interfaces
2 Serial Ports
SD/MMC Card Interface
5-position Joystick and push-button
Analog Voltage Control for ACD Input
Amplifier and Speaker
Up to 70 GPIO
Debug Interface Connectors
- 20-pin JTAG (0.1 inch connector)
- 10-pin Cortex debug (0.05 inch connector)
- 20-pin Cortex debug + ETM Trace (0.05 inch connector)Evaluation Software

Kit Contents

MCB1700MCB1700 Evaluation Board
Keil MDK-ARM Evaluation Tool
A µVision IDE Quick Start Guide
An ARM Development Tools Overview
Example Programs for the MCB1700 Evaluation Board

Tags: mcb1750, om11036, mcb1700, lpc1758, om11032, lpc1769, mcb1760, lpc1768