STMicroelectronics: STM32L152-EVAL Evaluation Kit

Michael — Sun, 27 Oct 2013 03:02:44 GMT

Current Revision posted to Documents by Michael on 10/27/2013 3:02:44 AM

Buy NowBuy Now

Development Tools

Kit Overview

The STM32L152-EVALSTM32L152-EVAL evaluation board is a complete demonstration and development platform for STMicroelectronics’ ARM cortex-M3 core-based STM32L152VBT6STM32L152VBT6 microcontroller supporting two I2C, two SPI and three USART channels, 12-bit ADC, 12-bit DAC, 16 KB internal SRAM and 128 KB Flash, USB FS, LCD controller, touch sensing and JTAG debugging support.

The ultralow power STM32L15xxx incorporates the connectivity power of the universal serial bus (USB) with the high-performance ARM Cortex™-M3 32-bit RISC core operating at a 32 MHz frequency, a memory protection unit (MPU), high-speed embedded memories (Flash memory up to 128 Kbytes and RAM up to 16 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer a 12-bit ADC, 2 DACs and 2 ultralow power comparators, six general-purpose 16-bit timers and two basic timers, which can be used as time bases. Moreover, the STM32L15xxx devices contain standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs and a USB. They also include a real-time clock and a set of backup registers that remain powered in Standby mode. Finally, the integrated LCD controller has a built-in LCD voltage generator that allows you to drive up to 8 multiplexed LCDs with contrast independent of the supply voltage.

The ultralow power STM32L15xxx operates from a 1.8 to 3.6 V power supply (down to 1.65 V at power down) with BOR and from a 1.65 to 3.6 V power supply without BOR option. It is available in the -40 to +85 °C temperature range.

Key Applications: Medical and handheld equipment, Application control and user interface, PC peripherals, gaming, GPS and sport equipment, Alarm systems, Wired and wireless sensors, Video intercom, Utility metering

More Development Kits and Tools
	STMicroelectronics Development Kits		ARM Development Tools
	Development Platforms & Kits		element14 Knode

Development Tools

Software Development Tools:

Tool Type	Supplier	MPN	Supported Family	Description
IDE	ARM	Keil MDK-ARM	ARM Cortex™-M / Cortex-R4 / ARM7™ / ARM9™	The MDK-ARM is a complete software development environment for Cortex™-M, Cortex-R4, ARM7™ and ARM9™ processor-based devices. MDK-ARM is specifically designed for microcontroller applications, it is easy to learn and use, yet powerful enough for the most demanding embedded applications. Learn More
RTOS	Segger	embOS	ARM Cortex™-M	embOS is a priority-controlled real time operating system, designed to be used as foundation for the development of embedded real-time applications. It is a zero interrupt latency, high-performance RTOS that has been optimized for minimum memory consumption in both RAM and ROM, as well as high speed and versatility. Learn More

Hardware Development Tools:

Tool Type	Supplier	MPN	Supported Family	Description
Debugger / Programmer	STMicroelectronics	ST-LINK/V2ST-LINK/V2	STM8 / STM32	ST-LINK/V2 In-circuit Debugger and Programmer for the STM8 and STM32 MCUs
Debugger / Programmer	STMicroelectronics	STX-RLINKSTX-RLINK	STM8 / ST7 / µPSD / STM32 / STR7 / STR9	STX-RLINK In-circuit Debugger and Programmer for a complete range of STMicroelectronics microcontrollers (STM8, ST7, µPSD, STM32, STR7 and STR9)
Emulator / Debugger / Programmer	ARM	ULINK2ULINK2	ARM Cortex™-M / Cortex-R4 / ARM7™ / ARM9™	ULINK2 Debug Adapter
Emulator / Debugger / Programmer	ARM	ULINKProULINKPro	ARM Cortex™-M / Cortex-R4 / ARM7™ / ARM9™	ULINKpro Debug and Trace Unit
Emulator	Segger	J-LinkJ-Link	ARM Cortex™-M / Cortex-R4 / ARM7™ / ARM9™	JTAG/SWD Emulator with USB interface
Programmer	Segger	Flasher ARMFlasher ARM	ARM Cortex™-M / Cortex-R4 / ARM7™ / ARM9™	Flash Programmer for ARM and Cortex cores

Technical Documents

Learning Center

Type	Description
User Manual	STMicroelectronics: STM32L152-EVAL Evaluation Board User Manual
User Manual	STMicroelectronics: STM32L152-EVAL Demonstration Firmware User Manual
Product Brief	STMicroelectronics: STM32L152-EVAL Evaluation board Data Brief
Application Note	STMicroelectronics: AN3310 - Application Note of Updating Firmware in STM32L1xx microcontrollers through in-application Programming Using the USART
Application Note	STMicroelectronics: AN3300 - How to Calibrate an STM32L1xx Internal RC Oscillator
Application Note	STMicroelectronics: AN2869 - Guidelines for Designing Touch Sensing Applications
Revision Note	STMicroelectronics: STM32L152-EVAL limitations

Design Elements

Type	Description
Schematics	STMicroelectronics: STM32L152-EVAL Schematics
Layout	STMicroelectronics: STM32L152-EVAL Gerber Files
BOM	STMicroelectronics: STM32L152-EVAL BOM
BSP	STMicroelectronics: STM32L152-EVAL Demonstration Firmware

Video

www.youtube.com/watch

Kit Features

Four 5 V power supply options:
- Power jack
- ST-LINK/V2 USB connector
- User USB connector
- Daughterboard
Audio speaker and microphone connected to DAC and ADC of STM32L152VBT6STM32L152VBT6
2 GByte or more SPI interface MicroSD CardTM
I2C compatible serial interface temperature sensor
RS-232RS-232 communication
IrDA transceiver
JTAG and trace debug support, ST-LINK/V2 embedded
240x320 TFT color LCD connected to SPI interface of STM32L152VBT6STM32L152VBT6
Joystick with 4-direction control and selector
Reset button
Tamper or Key button
4 color user LEDs and 3 LEDs as MCU power range indicator
MCU consumption measurement circuit
LCD glass 32 x 4 segments connected to LCD controller in STM32L152VBT6STM32L152VBT6
Extension connector for daughterboard or wrapping board
MCU voltage choice of 3.3 V or adjustable from 1.65 V to 3.6 V
USB FS connector
Two touch sensing buttons
Light dependent resistor (LDR)
Potentiometer

Kit Contents

STM32L152-EVALSTM32L152-EVAL evaluation board

Tags: stm32l152vbt6, stm32l152-eval